Hi Correpondance Request Delete F.63
Dear All,
My client not yet delected correspondance request data till last 6 yeras in SAP. In the same cause system will very slow while doing the FBRA transaction code. So please suggest is it any problem occur if delete the same data in the table through F.63 ? Please correct if i am wrong.
Table is BKORM
Best Rgds
Suma
Hello,
What F.63 do will do is, in case if somebody has requested the correspondence through FB12 and does not executed through F.61 it still remains as a request.
You can delete them by using F.63. However, these again will not be available for spooling through F.61
I do not think these are nothing to do with FBRA transaction code. Unless you made thousands of requests and not printed.
Anyway, I would suggest, you need to have a discussion with Basis Consultant to see in how many ways the performance can be improved, like space problem, deletion of old log etc.
Regards,
Ravi
Similar Messages
-
Data request deletion problem from remote system.
Hi experts.
Now i am facing one critical problem . The description is as following:
we design the edw level in one phsical BW machine(A) which contains only dso infoprovider. This machine(A) works as datasource to provide data to another physical BW machine(B).
The dso in A system is exported as datasource , Cubes in B system load data through this datasource .
We first do the initialization with data contained on B system and then load delta data from A system. But if we want to delete some request in system A ,the system indicate this request can not be deleted unless the initialization in system B is deleted( this will lead to all the data missing in system B).
Can anyone explain this mechanism to me , please help me suggesting some kind of methods to delete the request in system A without deleting the initialization information in system B.
Thanks in advance.
Waiting online for your kindly reply.1. Ask your Basis to look into it.
2. try analyse your Baqckground Process in SM51.
3. Is your Deletion Job started immediately or any Delay?
4. If That cube or ODS has only this request which you are deleting, go with Context Menu Cube or ODS (by right click) --> Delete Contents.
Delete Contents will improve performence compare to Request Deletion..
If you have request more than this, you should not go for this.
Nagesh Ganisetti.
Assign points if it helps. -
InfoPackage with overlapping requests deletion
Hi,
what is an InfoPackage with overlapping requests deletion? Where is it used?
Regardshi,
check out the below link it answers your query in detail.
Re: Delete overlapping request
hope it helps.
regards,
AL -
Hey all,
how are you!
I have a little glitch in my Processchain and since I can not seem to find an answer myself I was wondering if any of you might give me some feedback
In a processchain I created, I wanted to delete the PSA-table contents and I added this process called "Deletion of requests from PSA".
But whenever I check my daily run, I have to get back (due to its "red" nature) and do manually 'rightclick>repeat' and then all seems well.
The 'red' condition upon monitoring gives me the message "no sub-request for this request"...
well...anyone?Hey Olivier,
It is a transactional load from an R/3 ODS.
In the processchain first we load an ODS and then we start with a request-deletion on the PSA.
Options:
- older then...zero days
the others are not used.
Nothing fancy
Just following
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/078f3b0e8d4762e10000000a11402f/frameset.htm
Edited by: richard boom on Jan 17, 2008 2:29 PM -
I lost my Ipad 5 and requested delete all from find my phone, they found it and as soon as I activated deleted itshelf as expected, how do I start it again ?
The iPad should be asking you for the Apple ID and Password when you turn it on.
-
Hi all,
still we are facing spool over flow issue, even though we installed kernel level-236/64bit.
We had scheduled a batch job to convert spool request deletion date with the report-RSPO2010, and it is running fine.(it run daily before spool reorg job run). SPOOL_REORG job also finishing with out errors but still spool numbers volume is very high.
SAP_BASIS level is 18.
Any idea to over come this issue. Please guide me.Hi Nani,
Please refer to the following post:
Re: Database error: TemSe->XRTAB(3)->1 for table TST01 key
This over flow may occur due to lot of spool requests being generated as a result of certain background jobs or manual requests from users while generating some reports. During busy time of business this happens.
To know which job is responsible to genereate more number of spool request please do following:
T-Code: SM37
Job name: "*"
User name: "*"
Select "FINISHED" check box.
Job Start Condition:
From date: Past 10 days to cureent day (date) and click execute button.
In the resulting window within "Ln" column you will see a mat like symbol representing the job generated spools. Select that particualr job and right click and select "Spool List" which will display number of spools generated by the job. You can contact the owner of the job and communicate with him if the number is too big.
Please let the community know if more information is required.
Regards,
Nani Chowdary. -
Requested deleted in Transport Organizer
Hi,
How can we find out request deleted in Transport Organizer (SE10). Is there any table or log which possess the request and the person who deleted the request.
Thanks.Dear Rakesh,
We just can find only modified ,released ,released from starting requests in Transport organiser,
I suppose we cant find the deleted requests and person responsible in BW side.
The Basis people may help u in this issue as they maintain dumps of what has been loaded and deleted on a timely basis..Please do contact basis People.
Assign points if needful.
Best Regards,
VVenkat. -
BADI/BAPI/... for request deletion required
Hello,
Does anyone know if there is any BADI, BAPI or recommendable standard programme that I could use to have a request deleted (result should be the same like deleting the request in RSA1) based on the request number ?
Thanks for any advice.
Klemens G.Hello Kishore,
Thanks for the 2 tips.
The BAPI you are mentioning will still keep the request entry visible in the administration tab of the infocube. Can I get it out of there as well like highlighting the request and clicking the "Delete"-button (which will remove the request and delete its associated data from the cube)?
Kind regards,
Klemens G. -
Cube Request Deletion - Other loads possible or LOCK problems
Hi Folks,
can somebody tell me if there could be a lock situation if I have in one process chain the cube request deletion step running (cleaning out some request) and at the same time another load is running into the cube? We would not drop/re-create the index in load situation so no lock by the index operation.
Any experience?
From what I have seen there shouldn'T be a problem as the request deletion will be "scheduled" and simply execute if lock is release (if there is any) and the deletion it self places only a quick lock to determine the request ID but doesn't much impact other loads.
Is this all correct? Or any other views?
Thanks,
AxelHi,
While Loading
It is not possible to:
· Delete data
· Archive data
· Delete indexes and reconstruct them
· Reconstruct statistics
For more information:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/bb/bdd69f856a67418962d74bfd7bd8af/frameset.htm
Regards,
Anil Kumar Sharma .P -
Can any one explain how the Requests deletion in an ODS & Cube works?
Can any one explain how the Requests deletion in an ODS & Cube works & differs?
It works in the normal way as you delete a request but following are the differences between them
1) If you try to delete a request from the ODS, all the requests which are loaded after this request also get deleted, and in the cube its not.
2) You cannot delete a request from the ODS once its change log has been deleted, similary you cannot delete a request from the cube that has been compressed.
3) you can delete overlapping requests from a Cube. but in ODS its not possible.
Regards,
Bharat -
Hi All,
The request is supposed to be deleted by the system automatically as and when there is a new request is loaded. But the job is cancelled and the requset was not deleted.
The Job Log contains the following information.If any one has seen this error please do let me know whats the solution for this.
Job log
Job started
Lock NOT set for: Deleting transaction data one request at a time
Job cancelled after system exception ERROR_MESSAGE
If you have any ideas how to resolve this do let me know.
Regards
vijay thammineniI think are you loading and deleting parallel activities to the same cube or ODS? ..
So for deletions, it tried to lock the object.. but since it was already locked by other process it failed..
Also check in SM12 to see any locks ( remained ) on the cube?
regards,
Hari -
Transport request deleted - how can I delete the link in CharM ticket?
Hi everyone,
yesterday, I manually deleted an empty transport request in the development system. Bad idea, I know, because now, I get errors in the CharM ticket, because it still has a link to the transport request, which has been deleted.
How can I get rid of the broken link in the CharM ticket?
Thanks in advance,
Benhi
Please check if you can decouple transport request using charm
also if you can let us know what kind of error in charm ticket will be helpful
Saravana -
Bad request deletion at a time from multiple cubes?
How do we delete a bad request or reconstruct from cube at a time which is loading from single info source to multiple cubes?
hi Bharath,
try these links.
http://help.sap.com/saphelp_nw04s/helpdata/en/ca/5c7b3cbd556915e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/espackages/maintenance%2brequest
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65a8e07211d2acb80000e829fbfe/frameset.htm
hope it helps. -
Hi All,
I have a problem for which i am not able to get the proper solution from the threads.
Can anyone help me to solve this.
I am getting this error "" RSDU_TABLE_DROP_PARTITION_MSS Error while creating the clone table /BIC/B0000183000"
while deleting request from the psa.
This error i am getting because i have deleted the data from the psa table from the tcode se14, but the requests are still there in the request. There is no data in the psa but the request exists.
Now i want to delete the empty request, because i am scheduling the process chain to delete all request older than 3 days. But because of this empty request, i am getting the error while scheduling the process chain.
I also tried to delete the psa data from rsa1old but to no sucess.
Can anyone help me to solve this issue.Hi ,
For your issue you can try these steps : -
1 - Run the report - SAP_DROP_TMPTABLES.
2 - Run the report - RSAR_PSA_CLEANUP_DIRECTORY_MS.
You can Check details for the report execution from the note : 1063105 - Program "RSAR_PSA_CLEANUP_DIRECTORY /_MS"
3. You can also check the note - 1299865 - DB Shadow tables with '@k' name (e.g /BIC/B0000201@k0).
Regards,
Lokesh -
Request Deletion from Write-optimized DSO
Hello,
With the new Write-optimized technology, it is possible to delete manually "older" requests from the W-O DSO.
Could anyone of you think of an automated process to delete "old" requests from a W-O DSO (not the entire content , the most recent should still be available.
For instance : delete everyday the request older than 7 days.
Already checked solutions :
- Selective deletion at the administration level of the DSO -> cannot be repeatedly scheduled
- Copying the Selective Deletion generated program to make one's own program and schedule it (system cannot "remember" the generated program)
- Diverse SAP Function Module -> do not work for this scenario (like RSSM_DELETE_REQUEST, only for cubes, RSSM_PROCESS_REQUDEL_ODSO or RSSM_DELETE_REQUEST, where you need to specify the Request number
- We do not want to include a delete job in a routine at the Transformation level.
- We do not want to complicate the Data Model by creating a new intermediate DSO allowing to flush the DSO at each load..
Any other ideas??
We are on Version 7.0, SP 13.
Many thanks!
amandaHi ,
We have worked on similar business requirement .We wrote a report program in SE38 and running it via a process chain .
If you want i can help you to write code for same .
It will be a two step process :
1.deleting request from RSICCONT so that it get deleted from manage tab.
2.deleting data from active table of that WDSO .
Code for Program :
data :v_time type c length 17,
v_date like sy-datum .
( N) = 7 put no of days here before which you want to delete records
v_date = sy-datum.
subtract 7 from v_date.
concatenate v_date sy-uzeit into v_time.
delete from rsiccont where icube = wdso_name and timestamp LT v_time .
delete from wdso_active_table_name where rstt_tsmp LT v_time.
It will do your work .
Regards ,
Jaya
Maybe you are looking for
-
Making a subscribe button?
Hi! Very pleased with my efforts today! Managed to publish my first podcast and itunes picks it up if you type the feed into the box. Next question....is there any way to create a subscribe button to add to a web page so that people can just click it
-
Axis2 Complex Type return is empty
I'm writing a simple web service that is going to be used by an online infopath form. The service is returning an array of Project objects. The class def for a project is: public class Project{ public String projectId; public String description; publ
-
Match EQ. Good plug, but there's something that dosen't add up..
I tried Match EQ plug and I find it useful to observe and compare Mixes and tracks, but there's something I can't understand. Here it is: I made a match EQ between a source and a destination Mix in 2 different way: 1. The source Mix was louder than t
-
When I open a file from a client, some of the text has been broken into individual letters (not complete words). Since we have over 100 files to update, this causes problems because some of the letters are now crashing into each other. I need to find
-
Why and How is Linux is Suitable OS for Oracle !
Can anybody help me in finding Clues that how Linux Operating System suitable in all way for the Oracle? What is the reason behind that technological point of view and also in all ways? Please provide me the answer with some suitable links and hints.