Hi, could you please answer question in terms of Meeting Place?

Hi, I am working in a trouble shooting of meeting place, I got very confused these 2 question:
1) in a real conferencing senario, does each audio stream from a participant should go to Audio Blade (Media server) in order to mix together. if so and we have voice gateway conference resource, then what is it for ? I mean no use voice gateway DSP farm to setup a conference?
2) in version V7, each audio blade has 250 session ports ( G711 audio codec only), and for instance we have 2 blades, then it mean that all the participants all of the meeting in a same time should be no more than 500 ?
3) the audiao blade working mode in a shared pool ? or other machanism?
thanks in advance!

Good morning Fnu,
tons thanks to you, right not I get more clear of MP;
could you please correct me if I am wrong?
1) 1 ports means 1 session of audio, then if I have total 500 ports, then I can shedule 2 meetings, each has 250 participants, or I can shedule 100 meetings, each has 5 participants, correct?
2) when I schedule a meeting, then I wll reserving dedicated resouces on MCU, this means I can know which resource I will use in which blades before the meeting? I can check it in application server or somewhere else?
one of my client suffered weard issue that some participant hear choppy voice, should re-joint meeting again, or even sometime, the host should cancle meeting and need to set up again to resolve it
thanks!!!

Similar Messages

Could you please answer this questions ?

could you please answer this questions ......
2. What can you do with the DBMS_LOB package?
A. Use the DBMS_LOB.WRITE procedure to write data to a BFILE.
B. Use the DBMS_LOB.BFILENAME function to locate an external BFILE.
C. Use the DBMS_LOB.FILEEXISTS function to find the location of a BFILE.
D. Use the DBMS_LOB.FILECLOSE procedure to close the file being accessed.
3. Which two statements about packages are true? (Choose two)
A. Packages can be nested.
B. You can pass parameters to packages.
C. A package is loaded into memory each time it is invoked.
D. The contents of packages can be shared by many applications.
E. You can achieve information hiding by making package constructs private.
4. Which three are true statements about dependent objects? (Choose three)
A. Invalid objects cannot be described.
B. An object with status of invalid cannot be a referenced object.
C. The Oracle server automatically records dependencies among objects.
D. All schema objects have a status that is recorded in the data dictionary.
E. You can view whether an object is valid or invalid in the USER_STATUS data dictionary view.
F. You can view whether an object is valid or invalid in the USER_OBJECTS data dictionary view.
5. You need to create a stored procedure, which deletes rows from a table. The name of the table from which the rows are to be deleted is unknown until run time. Which method do you implement while creating such a procedure?
A. Use SQL command delete in the procedure to delete the rows.
B. Use DBMS_SQL packaged routines in the procedure to delete the rows.
C. Use DBMS_DML packaged routines in the procedure to delete the rows.
D. Use DBMSDELETE packaged routines in the procedure to delete the rows.
E. You cannot have a delete statement without providing a table name before compile time.
6. You need to drop a table from within a stored procedure. How do you implement this?
A. You cannot drop a table from a stored procedure.
B. Use the DROP command in the procedure to drop the table.
C. Use the DBMS_DDL packaged routines in the procedure to drop the table.
D. Use the DBMS_SQL packaged routines in the procedure to drop the table.
E. Use the DBMS_DROP packaged routines in the procedure to drop the table.
7. When using a packaged function in a query, what is true?
A. The COMMIT and ROLLBACK commands are allowed in the packaged function.
B. You cannot use packaged functions in a query statement.
C. The packaged function cannot execute an INSERT, UPDATE, or DELETE statement against the table that is being queried.
D. The packaged function can execute and INSERT, UPDATE, or DELETE statement against the table that is being queried if it is used in a subquery.
E. The packaged function can execute an INSERT, UPDATEM or DELETE statement against the table that is being queried if the pragma RESTRICT REFERENCE is used.

It should be good if you try yourself by training your brain to solve these questions and then share them with us to get more help or advice
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com

Could you please answer to this?

[object array|http://i218.photobucket.com/albums/cc298/curseofgoldendragon/code-1.png] Could you please answer to this?

Inserting text is better than linking to external images.
Anyway, look up autoboxing.

Could you please answer this questions. experts

what is the use of cell editor?
what are the sequence of operations carried out when transpoting object?
why we use navigational attributes ?please elaborate

hi..
navigational attrib:
From a system performance point of view, you should model an object on a characteristic rather than on a navigation attribute. The reasons for this are as follows:
·        In the enhanced star schema of an InfoCube, navigation attributes lie one join further out than characteristics. This means that a query with a navigation attribute has to run an additional join (compared with a query with the same object as a characteristic) in order to arrive at the values. This is also true for ODS objects.
·        For the same reason, in some situations, restrictions for particular values in the navigation attribute (values that have been defined in the query) are not taken into account by the database optimizer when run schedules are created. This can result in inefficient run schedules, particularly if the restrictions are very selective. In most cases, you can solve this problem by indexing the navigation attribute in the corresponding master data tables (see below.)
·        If a navigation attribute is used in an aggregate, this aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded.) This change run is usually one of the processes that are critical to the system performance of a production BW system. This is why, by avoiding using navigation attributes or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance.
BEx Cell Editor: In queries with two structures, you can now reference cells at the intersections of rows and columns.
chk this link for transportation:
http://help.sap.com/saphelp_nw04/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/content.htm
hope it helps..
all the best...

We are apply to join MFI program .Could you please tell me the contact means of dedicated person at Apple Beijing Office ?, We are apply to join MFI program .Could you please tell me the contact means of dedicated person at Apple Beijing Office ?

Dear Whom it may concern ,
I am Coco Lao , I come from Dong Guan Data Target Electronic Limited.
We are applying to join MFI program . September 26,2013, you ask us to join the facing to facing meeting at Apple Beijing Office . You just give us the address . Could you please tell us the date of meeting ?Could you please tell me the contact means of dedicated person at Apple Beijing Office ?
I am looking forward to your early reply .
Best Regards,
Coco Lao
<E-mail Edited by Host>

You are not talking to Apple here only other users like yourself. No one here will be able to help ypu with this.
You will need to contact the person who sent you this information.

HT204088 Dear sirs, Could you please help me on my problem with my apple ID I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working, My account have 50$ and stil

Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anything

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546)

Dear Friend,could you please send me answer for my small question.

Dear fiend,
i am new to ITS and i have one task to develop its program. but i am getting page error and i don't know where is the error.
SO could you please send me one Small and simple template,
<b>which conatin: parameters and radio buttions only.</b>
so that i cant modify my template.
Thanking you,
with best regards.
satya.

hello Raja,
Thank you for your response.
it is webgui.
and also i wanto to learn ITS asap, if you know any book's which are available in market, please let me know.
i written one program ,which contain many Errors, Because i copied form other program , which contain parameters and check box, but my requirement is parameter and radio buttons only,
if you have time please refer Below Topic in ITS :
portal: ITS: TOPIC:
unable to Run below its prog,because of page error,please send me solution.
with best regards
satya Prasad.

HT201363 Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?

Hello I forgot my Security question of my Apple ID ? I don't kow what should I do and how to solve this problem ? could you please help ?

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104569)

HT5312 Dear I forget my security questions , could you please guide me

Dear I forget my security questions , could you please guide me

Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Explain that after resetting your password, you are still asked for the answers you have forgotten, before you can gain access to My Apple ID > Manage your account > Password & security, which is where you need to be to change your answers.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download

Could you please tell me why as a Brit resident in Japan therefore having a billing address that is Japanese is forced to only get service from the Japanese online store? Is there not some way of allowing me to select movies and music to buy and download from other stores. Why do am i forced to try to nread Japanese when I have selected English as my language. The price for Downloads is no different and even if it was I am happy to pay. This also applies to Movie rental which is crazy and extremely restrictive. I a supposed GLOBAL community why does Apple do this.

You can buy ONLY from the itunes store of your country of residence (As proven by valid billing address of credit card) and ONLY while inside the borders of that country.
These are the terms of the itunes store.

Why GWt suggest box is not working in the latest versions of Firefox ? It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

Why GWt suggest box is not working in the latest versions of Firefox ?
It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

jbren wrote:
I repeatedly have problems with playback on my STB's. Go thru all the motions, inhouse agent, fix multi room dvr problems. Unplug unit, unplug dvr, etc. etc. etc. The DVR'd show will play on the DVR but not on the STB's. What's up with that?
Sorry to hear the auto fix suggested early did not fix your problem. So we can get more information from you, I have copied your post to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

HT2693 I have the phone number and iphone serial # of my second device that is missing. However it has the same Apple ID and is not showing up on the "Find iphone". Could you please help me?

I have the phone number and iphone serial # of my second device that is missing. However it has the same Apple ID as my other iphone and is
showing up on the "Find iphone". Could you please help me find my iphone
<Personal Information Edited by Host>

Sorry if this seems negative but you really should post such a question in the iPhone section of Apple Communities. You are much more likely to get expert help there immediately.
Just re-post with the same detail.

[HELP] Could you please give me a solution to BW reports of ECC purchasing

Hey, guys,
I want to do some customized spend analysis reports of MM purchasing.The purchasing data will be retrived from 2 source systems ( 1 is ECC 6.0 and the other is R/3 4.6c ) And these reports should be viewed by "commodity" , however, there is no commodity code maintained in material master data.
So my solution is :
1. to find a idle field in material master data to maintain this "commodity", this could be flexible for me, however, it's not easy to push other guys to do this. ( I don't have the authority to do the master data maintainence.)
2. to maintain a mapping table in BW, and material and commodity(also description)should be the fields of this table. However, I don't think it's a good way. Because, this table is not easy to maintain and synchronized.
<b> Could you please give me any suggestion for this situation. Is there any good solution to my question? </b>
Thanks a lot

first things first .. if they want a report by commodity .. ask them to maintain it ..
1. if you can make the guys maintain commodity in a idle field, you can as well make them enhance the material master and add a new field ... its upto the flexibility u have
2. i dont think thats a bad idea.. but i would prefer somebody maintain the same mapping table in source system and ask them to RFC it to BI .. so that u can use it as a look up table ...

Could you please tell what is encryption mechanism used in Release Management for storing any password

Could you please tell what is encryption mechanism used in Release Management for storing any password

Hi y e ll e sh,
I am trying to involve someone to further look at your question. There might be some time delay. You can also check replies for the similar question in this
thread. Appreciate your patience and thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Hello, I wonder why there isn't Finnish language in the adds-on list. Could you please make it available to Firefox users. Thank youin advance. Rappe

Hello, I wonder why there isn't Finnish language in the adds-on list. Could you please make it available to Firefox users. Thank youin advance. Rappe

(1) Firefox's built-in post-crash page has not been a real HTML page for a long time (for example, from the time of Firefox 22, see: [https://support.mozilla.org/en-US/questions/968212 Want to save LOTS of versions of "Restore Session.xht" from the "oops ..." page for later use]). If you had this working differently with Firefox 25, that might have been created by an extension.
You can check to see whether extensions are disabled or need an update on the Add-ons page. Either:
* Ctrl+Shift+a
* orange Firefox button (or Tools menu) > Add-ons
In the left column, click Extensions. The disabled extensions cluster toward the bottom of the list. To poll for updates, use the "gear" button above the list and choose Check for Updates.
If you used the Reset feature (or Firefox automatically did a reset due to some problem during upgrading), you will need to reinstall missing extensions. The reset feature creates a folder on the desktop named Old Firefox Data. Do you have that folder? There may be data you can recover from it.
(2) There are many ways for history to get cleared, both internal to Firefox and external. Could you double-check your Privacy settings?
orange Firefox button (or Tools menu) > Options > Privacy
* The "Firefox will" drop-down says Remember History: Firefox shouldn't be clearing history, but an add-on or external software could do it
* The "Firefox will" drop-down says Use custom settings for history: inspect the "Clear history when Firefox closes" setting to make Firefox isn't set to clear history. Also check your add-ons and consider external software.
Firefox normally accumulates months of history. However, some of Firefox's database sizes are based on disk space available. If your hard drive is very full, Firefox might reduce the amount of history stored.

Hi, could you please answer question in terms of Meeting Place?

Similar Messages

Maybe you are looking for