Hi dude help me on OBIEE installation tried all possible ways
Hi,
recentiy i have format my laptop and tried to install OBIEE 11g at the very begin Oracle db11g and RCU has installed successfully.
When i started to installed the OBIEE from step 1 to 12 are gone fine,at the step 13 copying files is not happening i waited more than one hour for this and i have cancel it too.
Solution i tried is:
After searching through the internet i have gone through the some solution but its not working.
1. changed enviroment variable TMP,TEMP, to my hard disk space.
2. installed latest JDK 1.7.
3. tried in different hard disk for the installation , not working
Kindly give me some solution.
These are the steps I used to install:
Use the following steps to install OBIEE 11.1.1.5 on Windows 7 64 bit:
Download and install the Oracle JRockit JDK.
You MUST install to a file path WITHOUT SPACES. I recommend "C:Java". DO NOT USE C:Program Files
Create a JAVA_HOME environment variable if it does not exist and set it to the JRockit install path
Add the JAVA_HOME path to the PATH environment variable.
Verify your install by running the command "java -version" in a command prompt. You should see information related to your JRockit install.
Download and install Weblogic 10.3.5
From Oracle's website, download the 10.3.5 version for 64 bit platforms. The file should be named wls1035_generic.jar
Install by running the command "java -D64 -jar wls1035_generic.jar" in a command prompt in the same directory of wls1035_generic.jar
Download and install Oracle Patch 12564602
Be sure to download the patch for version 10.3.5 of Weblogic. The patch should contain 3N24.jar
Copy 3N24.jar and the patch_catalog.xml file to "C:\Oracle\Middleware\utils\bsu\cache_dir"
Navigate to "C:\Oracle\Middleware\utils\bsu" in a command prompt
Run the command "bsu.cmd -patchlist=3N24 -patch_download_dir=C:\Oracle\Middleware\utils\bsu\cache_dir -prod_dir=C:\Oracle\Middleware\wlserver_10.3 -install -verbose"
Download and install OBIEE 11.1.1.5
When you run the installer, you must select the "Software Only" install option in the beginning
This install should be straightforward, just follow the prompts after select "Software Only"
Manually configure the Software Only install
Run the file "config.bat" at the location "C:\Oracle\Middleware\Oracle_BI1\bin" (this location may change depending on where you selected your Middleware Home to be
Similar Messages
-
Ipod 5th generation not turning on at all tried all possible ways
i had tried resetting, hold button on and off, i tried all way to get it to turn on and nothing works anyone knows of any tricks or of a better way to get it to work it would be much appreciated...
I would continue working through each of the suggestions in this Apple support document.
iPod won't turn on
B-rock -
I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them. -
I have forgoton my passcode on ipad 2 and i have also tried every possible way to restore the ipad but it is not workin plz someone out there help me...
Forgotten passcode
http://support.apple.com/kb/HT1212 -
Friends,
My iPad2 was locked and disabled because my kids entered several times the passcode and now it is locked. I tried every possible ways and read all related items and followed precisely articel http://support.apple.com/kb/HT1212 but after i restored and update teh iPad, itunes keeps giveing me the same message:
The iPad "iPad" cannot be restored at this time because the iPad software update server could not becontacted or is temporarily unavailable.
I tired at different time of teh day and noght and different days yet kept getting the same message.
Pls assist me as now the iPad is useless
Regards,
JoeIf reset doesn't work, try and force the iPad into Recovery Mode.
Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error...
I have tried all possible solutions i found on internet...my restrinctions are disabled...tried reinstaling, relogging, restarting phone.. nothing seems to help...
normally i would contact custommer support but i m using US account and i m not from US. anyway my US account is charged with money and it workes perfectly for all my other friends using this method ( we got some free US vouchers so we needed US accounts)
Any advice?
thanks in advanceiTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
My blackberry is stopped booting at around 90% and doesnt start..i have tried all the ways..
It stopped boot at 91%..i have tried all the ways..i replaced battery while it is still connected to the charger...i tried to connect it to pc..it doesnt work..pls help me soon..no phone wid me now..nd im really helpless
Did you reload the device's software?
-
My 3G connection is not working after updating to iOS 6.1. I have tried all possible solutions like resetting the network , restarting iPad , ...
The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1
-
My camera is not working, and I have tried all the ways possible to get it working, but no luck. What do I do?
Having tried all the ways possible to get it working, contact your retailer again and politely tell them they did not yet satisfactorily resolve your trouble. Their Apple-Authorized Service Provider will be able to repair it.
Message was edited by: EZ Jim -
Ipod Shuffle not working after trying all possible supports from Apple!!!!!
I have an ipod shuffle and it has been working fine. It turns on and off and I can play music. Now all of a sudden I cannot connect my shuffle to my labtop through its usb port. It won't recognize it at all, it cannot be charged and I cant even attempt to put new songs on it. I am very angry with apple's service. I tried all things possible on their site and have continually requested repair service. I constantly get an unrecognized serial number every single time! I have copied it word for word and number for number over and over and over again. I can't even get one on one chat with a representative online because you guys don't recognize a serial number! This is just one big hassle and I don't feel like your service is very helpful at all. I love the Ipod and all it's accessories and other models but this is ridiculous. I even purchased the usb shuffle dock to try and see if it was my computer but it isn't. The dock doesnt recognize my shuffle either. I would appreciate it if Apple would just give me some kind of recognition and service me as a consumer please. I don't want to fill out some fax forms I don't even have a fax machine. Please help me figure out what's wrong or send me the things I need to send my shuffle in for repair thank you.
Just a note, the limited warranty on the Ipod Shuffle is 1 year. So when I got invalid serial number when I entered the s/n I knew something was wrong. What I discovered was that the character that I thought was a zero was actually a "D" and the "5" was actually an "S". Once I entered the correct serial number the website told me how much time I have left under the warranty. They even knew the approximate date that I purchased it - even though I didn't register it. So use a magnifying glass, a younger set of eyes, whatever to make sure you're entering the correct S/N. Now I just have to figure out HOW to return it. Good Luck!
Windows XP -
Clamshell mode not working, tried every possible way
Grr, this is getting so frustrating. I have tried every possible method, even following apple's guides. None of them work for me. I even tried the "boot" method the guy told me about in the last thread, and that still didn't work!!!
I have both my bluetooth mouse and keyboard hooked up right now, and it is not working . What would you guys recommend I do next?Just to make sure, are those the instructions you followed:
http://support.apple.com/kb/HT3131
If you have, do you happen to have a wired keyboard and mouse to try it with - that would rule out any possible bluetooth problems. If you haven't, try the ones in the link I posted. Also, are you using the correct cable connections/ports? -
Help need on obiee installation
hi all,
i got download of obiee 10.1.3.4 from oracle webside.
in that i got 3 subfolders named as
1.Client_Ancillary (Oracle_Business_Intelligence_Briefing_Book_Reade,Oracle_Business_Intelligence_Open_Intelligence_Interface)
2.Server (Oracle_Business_Intelligence)
3.Server_Ancillary (Oracle_Business_Intelligence_Office , Oracle_Business_Intelligence_Publisher)
I have installed server in my machine.
and others client_ancillary and server_ancillary where to install and what is the use of those...
can any body explain....
now i want to install obiee on a server and i need to access these from 2-3 pcs what would be the process..Client_Ancillary: Programs u use when you want to run a briefing book on your laptop and have no network access
Server_Ancillary: Programs u use when you have ms-office integration
Normally the setup from the server folder is enough for a server installation.
Regards
John
http://obiee101.blogspot.com/ -
Some one please help me. I have tried all day to download adobe flash 10.3 Nothing works.
I go through all of the required steps and get a message: Adobe Flash 10.3 successfully downloaded. You are now running AF 10.3. However I still can not view Youtube or any other internet clips. I continue to be told I need to upgrade and to download 10.3. I go through all of the steps again, but nothing works. Is there anyone here or at Adobe who knows how to fix this?
I cannot use Flash Player either. It appears to install correctly, but every site that uses flash player, keeps asking to re-install it. It is listed under manage add-ons v. 10.3.183.7 and is enabled. I am using a 32bit IE and 64 bit Win 7. I have downloaded the uninstaller and used it 10+ times, I tried other 3rd party installers/uninstallers and nada. I have installed this program 100+ times over the last few months. Its been extremeley frustrating, so I called Adobe callback support today 3 times only to have it disconnect on me when an agent finally appeared - go figure!
ActiveX filtering is enabled (i toggled this several times over the last few months)
I have tried several security levels all recommended by adobe sites.
Files in the /Windows/SysWOW64/Macromed/Flash directory are Flash10w.ocx, Flashinstall.log, FlashUtil10w_ActiveX.dll, FlashUtilw_activeX.exe, and install.tu
I thought something might have gotten corrupt in my registry, but on my 2nd computer, after a forced Adobe patch to 10.3 also, it also now doesn't work.
Seems like so many people are having problems with this version using Win 7 and there is so little information on how to correct the problems and the hints on the Adobe sites don't offer much in help.
I'm pretty close to just accepting that the flash player simply is broken and nothing I've done. -
Hallo,
Nieuw op dit forum toch gelijk al een brandende vraag: wij hebben na jarenlang 2 Power Macs G4 gedeeld te hebben nu een iMac G5 aangeschaft die we dus samen met de G4 willen delen. Nu krijgen we alleen de oude Mac niet meer opgestart. Verscheidene toetscombinaties geprobeerd maar niets werkt. Afwisselend krijgen we een blauw scherm met pijlen of een grijs scherm met een map met vraagteken. Iemand een idee wat we kunnen doen? Apple zelf ondersteunt niet meer apparatuur van 7 jaar en/of ouder. Mogelijk ligt het ook aan het netwerk of heb ik iets niet goed aangesloten. De iMac G5 draait ook onder 10.4.11.
Elke hulp is welkom!
Groeten en dank alvast.Dutch to English translation
Hello,
New to this forum as it has a burning question: after years we have 2 PowerMac G4 divide have now bought an iMac G5 so we want to share with the G4. Now we get only the old Mac does not boot. Several combinations tried but nothing works. Alternately, we get a bluescreen with arrows or a gray screen with a folder with question mark. Any ideas what we can do? Apple itself does not support more equipment from 7 years and / or older. It is also possible to the network or something, I have not connected. The iMac G5 also running 10.4.11.
Any help is welcome!
Regards and thanks already.
Try holding the Option/alt key down at bootup, does the Startup Manager show any Drives to boot from?
English to Dutch translation
Probeer het houden van de Option / Alt toets ingedrukt te houden bij het opstarten, is de Startup Manager toont alle schijven op te starten vanaf?
Can you boot from your Install CD/DVD by holding the c key down?
English to Dutch translation
Kunt je opstart van je installatie CD / DVD en houd de c toets ingedrukt te houden? -
I really appreciate your help, it's really urgent need?
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contacting Apple for support or
Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
Account Security.
3. Rescue email address and how to reset Apple ID security questions.
How to Manage your Apple ID: Manage My Apple ID
Maybe you are looking for
-
HELP! ITUNES WONT INSTALL (Error 7/Windows Error 127)
Help! I keep getting Error 7 (Windows Error 127) when I try to install Itunes on my laptop. I read that this error is caused by problems with Apple Application Support. I'm using Windows Vista (32 Bit version) Can anyone please help me fix this??
-
Firefox is not letting me open another tab when I click the button or the 'new tab' in file. I have restarted my computer, installed an update, and I still have the same problem browsing.
-
I want a last update of the extension developer toolbox for dreamweaver cs5.5
I have an older version of developer toolbox that I use with dreamweaver cs3. Where to download a new version for dreamweaver cs5.5
-
HT5312 how where do i go to actually reset my security questions or add a rescue email?
So I have forgotten the answers to my security questions. Where do I go to add a rescue email in order to reset them?
-
I really need help, my iTunes account won't work until I remember my security question answer but I can't. I contacted customer service but nothing is helping me , if you have any suggestions please help.