Hi error for profit center feild reuired entry

Hi experts,
My client has been asked to us,profit center as a reuired feild at the transaction stages.
For this we made profit center as required feild at the feild status grioup level.
After this one of my sd consulatant trying to post accounting document. but systom is displayed the followoing error.
I,E, Field Profit Ctr is a required field for G/L account 1000 202016.
202016 is the tax g/l account.
Please give solutions on this.
Regards,
Bramh

Hi,
Use t.code 3KEH.
or in our organisation also the same requirement i create one substitution for that if business area is this one substitute the same with business area because business area and profit center is same.
if both are not same u can do the same with constant.
Hope this is clear, if yes assign points
Regards,
Sankar

Similar Messages

Balancing error for profit center in transaction FB08

Dear All,
We have made Vendor payments for some invoices. But for some reaseon, we have to reverse the document. When we try to do FB08, we are unable to do so and we are also getting an error ' Balancing error for Profit center.' In our case though we are on ECC6, we have not activated Document splitting.
Kindly suggest how to reverse this document and what additianal steps to be followed to overcome this error.
Thanx
Shivaji

Hi Shivaji,
Please check the field status group of the GL accounts which you are reversing and check whether the Profit center field is maintained as Mandatory or not .If its so, then please change it as to Optional and try.
In your case you are not activated the document splitting function.so that i recommend you to check the same.
So please Check the field status group of vendor payment GL accounts for reversing .Ie Bank Account GL and Vendor Recon Account GL. If the profit center field for these GL are maintianed as mandatory in the field status group ,then change it as to Optional .
Please let me know...
Regards
Manu
SAP GD.
Edited by: manucs on Feb 12, 2012 7:54 AM

Accounting error : Posting not possible for profit center XYZ In company Z

HI folks,
Do any of you have come accross this error in passing of billing doc to accounting " Posting not possible for profit center 153 in company code Z134. Kindly let me know what could be the possiblity and the solutions
Thanks,
Kamal

Hi,
Might just be better off to take the guidance from your FI guys. Pl. check if all the assignments are made correctly, like the material is linked with a profit center and this profit center to a cost center and finally to the controlling area. Also check if the currency of the profit center is the same as the controlling area currency.
Regards
Sadhu Kishore

Report Painter Report for Profit Center

Hi All,
I am creating a report for profit center in GRR1.I was using library 8A3,& ledger 8A.which uses for PCA line i tems and table used is GLPCT.which shows profit center totals by period.I ran GLPCT in SE16 and found out No data selected.I see that profit center accounting is not active in my system ECC6.0
and I didn't see any line records for profit center in any of the profit center tables.GLPCA.Now if someone knidly suggets me how to achieve this report, can I still do it profit center wise or not? which library should i use in GRR1.The layout of my report is as under.Thanks
CURRENT MONTH*
Current Yr      Current Yr    Prior Yr
Actual            Budget        Actual          Variance
YEAR TO DATE
Current Yr      Current          Prior Yr        Annual
Actual            Budget        Actual           Budget    Variance
Regards
Shaun

Thanks Abhijit , I can now see my report group at the bottom of the list .I assigned you full points.I posted another question regarding report painter .If you could also give me some guidance on that.When I was creating rows and updating cost elements with account numbers.I set up 3 revenue accounts and then ran the report to see if I get any data for profit centers.I did get data but when I double clicked on one of the account,it displays this messsage.I read the msg. but could not make any sense with it.for example in definning row I put account number from/to 400000- 400000    Explode. and thats a characteristic.
No valid master data for characteristic 'Account Number'
Report MEG1 does not contain any data pages.
No valid master data for characteristic 'Account Number'
Message no. GR633
Diagnosis
No valid master data within the specified interval was found for the characteristic 'Account Number'.
Explanation:
For each characteristic that is processed in a report, the Report Writer optimizes the interval limits which are relevant for selecting data from the database.
Example:
A report contains the characteristic 'account', for which an account interval from 100000 to 200000 has been entered. However, if the master data validation shows that the lowest/highest account in this interval is 110000/190000, the selection will be limited to accounts 110000 to 190000 only.
The system returns this error message if no master data exists for the interval.
This error is typically caused by an invalid version. In FI-SL Special Purpose Ledger, for example, versions are assigned to the ledger and are defined in configuration. The report definition can then contain a non-defined version. A similar situation applies to controlling (cost center accounting): here, versions are assigned to the controlling area and fiscal year and can be defined in planning.
Another cause of this error is a ledger that is not assigned to the table for which the report was created.
Technical information:
The field name for 'Account Number' is 'RACCT'.
System Response
The system cancels processing.
Procedure
Check the report definition, or the specified master data, or the intervals.
Regards
Shaun

ERROR in profit center group creation...

hai...i want to UPLOAD ALL THE LIST OF PROFIT CENTER DETAILS INTO SAP USING BDC SESSION METHOD..for that purpose i tried to create profit center using TCODE -KE51, but profit center group is not available in my system...i tried to create profit center group seperately using transaction KCH1 and assigned that number on profit center creation screen(KE51)..but i got the error..PROFIT CENTER GROUP 1 CANNOT BE USED HERE....how to solve this error.????may be is there any error in creation of profit center group hierarchy..???..

HI
Thanks for the support, but I have already checked Ambiguity Check but there is no duplicae groups/profit centers are existed.
I tried the same through KCH2 and also path (profit center hierarchy maintenance), but the same error is existed. I have checked with different groups also. But any group it is throwing the same error.
Ex if i am giving group K123456 which is not existed. But the same error is throwing.
Can anybody please suggest is there any programe for correction ?
Thanks in advance
Rao

Cost component split transfer for Profit center valuation in ke27

Dear All,
We have activated multiple valuation/transfer prices. Material ledger is also activated.
We want to transfer cost component split to CO-PA by ke27.
We have defined separate costing keys for access to actual cost estimate for legal and profit center valuations.
But cost component split transfer to COPA works only for legal valution. Even we have defined type of valution for profit center costing key -transfer cost component split and total costs.
What should be else customized to transfer cost components splitting in profit center valuation to CO-PA from actual cost estimates?
With best regards,
Kamila.

Hi,
I have assigned the same value fields used for legal valuation to column 2, which was pointed in message.
But now I got following message in ke27:
For actual data, value fields that were already populated before CO-PA valuation cannot be changed in valuation.
1. As a rule, value fields that were filled before CO-PA valuation - be it from SD or by a manual entry of a line item - can only be changed by means of user exits.
(Note that for plan data, CO-PA valuation always has priority over the values planned manually.)
2. The valuation steps in a CO-PA valuation strategy are numbered sequentially. These numbers determine the order in which the steps are carried out within that strategy. As a rule, value fields populated in one step can be used as a basis for calculating values for other value fields in a subsequent step.
Value fields that were populated in a previous step are generally not overwritten by subsequent steps.
The exception to this are steps that use a CO-PA user exit. User exits let you change individual value fields.
3. If you valuate using multiple material cost estimates simultaneously, this means that the values of different cost components within the same cost estimate are aggregated and then entered in one CO-PA value field. However, value fields that already contain data from a previous cost estimate are not overwritten by a later cost estimate. Consequently, you should assign value fields in Customizing so that the values of different cost estimates are entered in different sets of value fields.
4. When condition values are transferred to CO-PA value fields, note that condition types that are assigned to the same value field are added together. This is also the case when the condition types come from different costing sheets within the valuation strategy.
So does it mean we should define separate value fields for PC valuation?
With best regards,
Kamila.

Validation for Profit Center and Trading Partner

Hi Gurus,
Please help me in creating validation for Profit Center and Trading Partner.
I want system to give an error if we use Trading Partner related to particular profit centers.
Please revert asap.
Thank You

Hello,
Please use T.code OB28 and select the call up point 2.
Than go to Prerequisite in expert mode and say
Prerequisite : BSEG-VBUND <> ' '
Check: BSEG-PRCTR = ' '
Error Message.: xyz
I have created Validation understanding if someone gives Trading Partner and also Profit center while posting a doc than it will generate an error message.
however if you have some diff req please change it accordingly/ take Abapers helps if not very clear.
I hope this helps
Regards
Shireesh

The dynamic selection for profit center in FBL1N isn't working

Dear all,
I have one one issue regarding FBL1N.
The dynamic selection for profit center in FBL1N isn't working.
If we enter profit center, we don't get any value.
As per developer after debugging, table BSIK is not getting updated, hence values are not updating in the report.
Please let me know, any configuration is missing.
BR,
Shailendra

Try BSEG and see if its there for the particular doc. If its not there its a functional issue, you have to capture profit center at the time of entry. You can either make the profit center field mandatory or substitute it at the time of document generation. Consult your FI consultant. If u have activated New GL features the profit center may me in table FAGLFLEXA. but i don't think u can get the profit center from this table for your purpose, you may need to develop a zreport.
And its not BISK its BSIK
Edited by: Harisankar S on May 4, 2010 3:05 PM

Layout for profit center planning

Hi
Which layout will be used for profit center planning upload.any help on this.
Thanks
Lily

Hi
I tried the same layout,after getting file upload error message only,i posted in the forum,have u tried with that layout 8A-111,Any way last time you mentioned that
u can use import file directory to upload multiple cost center planning by putting all in one folder,i tried but it is not able to,when i tried using that option still it is able to post one excel sheet only,do i need to assign path in different way or am i missing something,i already assigned points without testing and so can you tell me how to proceed from that import file directory,since it accepts only .TXT files.
C:\Documents and Settings\lilysg\Desktop\CCA (CCA is folder name)after this i need how to proceed.
See below your message
Hi,
Since you have 500 cost center and one excel file contains one cost center and multiple cost element, in that case you will having 500 excel files. To upload all the file at at time, pull all the excel files in single folder. Use T.Code: KP06 and select Excel Planning Upload under extras under the menu bar. Instead of selecting import single file, select import file directory. mention the path of the folder instead of giving path of the file and then execute.
Hope this helps.
pls assign points to say thanks.

4KE5-Actual Distribution for Profit center

I am facing the below error when I execute the 4KE5 for profit center actual distribution. I have maintained the number range but still the same error is there. I defined number range for Document type OC for year 2008.
please advise how to overcome?
"Document number: range not found
Message no. GA703
Diagnosis
An error occurred during document number determination. No range was found for number range object GL_LOCAL, sub-object TTSL.
System Response
No document number was determined. Results could not be updated.
Procedure
Inform the person in charge of number ranges."

When you enter GB02, Click on the Overview icon (Shift +F7)
You should be able to see
Subobject Element           Year             From No.               To No.            NR Status
$$$$                                                         2008                    1           9999999999                   0
                 A0
where $$$$ is your company code, 2008 or 2009 is the year for which you want the number range, along with the document type (AO)
If you cannot see this, then you have not assigned the Number Range to that document type.
Regards,
Sangeeta
Edited by: Sangeeta on Apr 8, 2009 4:57 PM

Error deleting Profit Center

Hi All,
Am getting the following error "A profit center scenario is active in new General Ledger Accounting" when I mark a profit center for deletion. Any idea on what is this and how will I be able to delete the profit center?
Thanks,
Rock

Hi,
If the profit center scenario is active in at least one ledger in the new General Ledger Accounting, you should not be allowed to delete a profit center using transaction KE54.
If you want to delete profit centers within a test (for example, in a test system) even though the profit center scenario is active in at least one ledger of the new General Ledger Accounting, you can use Customizing transaction 0KE2 without selecting the "Execute checks" indicator in the processing options. As result, you can delete the profit center at your own risk.
Regards,
Eli

Profit center feild in noted item (F-57) letter of credit

Hi Friends,
Kindly request you.
Actually i have one rqurement. for profit center.
At the time Letter of credit transaction (f-57 noted item),
There is no feild for profit center. Despite when you save the document and display, there is a feild for profit center. document automatically went to dummy profit center.
But my requirement is at the time of transaction only, i want enter the profit center.
For this,
Please give me your valuble sollution.
Thanks&regards,
dudekula

Hi ELi,
Thank you for your valuable suggestion.
If i go with ABAP development. For this they should get the access key From SAP.
Once if u we get the access key, then only only we can go with abap development.
For this what can put the valuble reason to SAP. Or what can i give the valuble answer to my abap team.
Regards,
Dudekula

Need to make profit center a req entry in F-28

I have the need to make frofit center a req entry in F-28. I did OBC4 and went to the field status group for reconciliation accounts and made profit center a req entry there. I also did ob41 and made the profit center a req entry for the psting key 15-incoming payment.
But after doing all this it still doesnt show as a req entry in F-28. It allows me to post with out entering a value for the profit center.
Can anybody tell me what Im missing here.
Thanks
Ratheesh

Please keep in mind that the reconciliation accounts are not relevant for Profit center. They derive Profit center.
If your version is < ECC 5.0 then the profict center will get derived when you run the periodic process of running 1KEK.
If you are using > 4.7 EE and new GL is activated then the document split will take care of filling the profit center provided ZERO balance for profit center is checked in Document splitting characteristics. Enterign the profit center in the line item of which GL acount type A,D,K is no meaning and not relevant.
Even if you write a validation the system may stop by not posting without a profit center. If you post with profit center and expect the standrad reports to show this like FBL1N or FBL5N it will not happen.

How to create master data source for Profit center group in source system

Profit center group information is available in SAP(T-code:kch3). But, I want to have this information in BW too.
Can anyone tell me how to create a datasource for Profit center group? And which SAP table is able to feed master data for this information?
Many thanks
rajatina.

HI ,
It looks lilke we need to use the FM like 'G_SET_LIST_SELECT' to get the Profit
Here ais note from the forums to get profit center group from table
From Table SETLEAF, Field SETCLASS = '0106'. Field SUBCLASS with controlling area. Profit center in Field VALFROM.
You will get Group name in Field SETNAME.
Regards,
Sathya

How i create choose from list for profit center

Hello ALL ,
Can any body suggest me how we create the CFL for profit Center .
I am creating add -on using sdk and create a screen form using screen Painter .
In my form there is matrix that contain the profit center column just like in sale order screen .
In this field (Profit Center ) I want to attach the CFL of profit center just like in sales Order screen .
but I am unable to find out the object type ID for profit center so please give me any idea

Hi,
Please post is on the SDK forum and close this thread. This is an SDK question.
Thanks,
Gordon

Hi error for profit center feild reuired entry

Similar Messages

Maybe you are looking for