Hi Expert,ADDON CONNETION TIME-OUT
I am FACING PROBLEM CAN ANY BODY GIVE ANSWER FOR THAT.
WHEN I START MY ADDON ON SERVER ADDON WORKING PROPERLY
BUT IN CLEINT PC ERROR "ADDON CONNETIONTIME-OUT" AND
"no sap business one application was found the request lookup key was not found in any active activation context."
Thans adva.
REGARDS
RAJKUMAR
Edited by: Rajkumar Gupta on May 28, 2009 2:36 PM
Hi Rajkumar,
Please search the forum for "request lookup key was not found in any active activation context".
There are may threads discussing this and the "connection timeout" issues.
Here is one such thread
No SAP Business One Application was found
HTH
Aravind
Similar Messages
-
whenever i tried to update my iphone through itunes it gives the server connection time out error and i am unable to update my software throught the iphone
Hello ujl,
The articles linked below provides steps that can help get your iPhone restored.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Allen -
hello, i left my ipod touch connected overnight to my playstation3 to charge and the next morning i woke up to find the ipod disabled. i put it on recovery mode and tried to restore it, but everytime itunes downloads the file, a windows pop-up appears saying "network connection timed out error 3259" and now my ipod is stuck on recovery mode. what should i do ?
You posted in the iPad forum instead of the iPod forum. I'll request that Apple move your post.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
Cheers, Tom -
JRun request connection time out
Hi,
I have a servlet which takes more time(Greater than 10 mins)
to process a request. How do I set the connection timeout for a
request in JRun.
I remember setting connetion time out in IIS, so I think it
should be here in JRun webserver configuration.
Any form of help is highly appreciated. Thanks in advance.
-SundarWinter999 wrote:
>
>
Server Error
> The server encountered an internal error and was unable
to complete your
> request.
>
ould not connect to JRun Server.
>
> JRun logs are attached.
> 2007-07-26 15:59:50 jrISAPI[9376:2408] command error:
Connection reset by
> peer <- [4200]
> 2007-07-26 15:59:50 jrISAPI[9376:2408] returning error
page for Connection
> reset by peer
> 2007-07-26 16:00:04 jrISAPI[8712:2408] 127.0.0.1:51011
connect failed: 10060
> Connection timed out
The log file you have attached is from the JRun connector,
not from JRun
itself. Please include the -out and -err logs from JRun
itself.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion -
Hi there,
I am facing problem while starting AddOn. After successfully installation of Addon when i am going to start the addon it say addon time out. but addon is working properly. If my addon is working properly then why it is showing that addon connection timeout.
anybody can help me.....Hi Vishnu,
Thankx for replying me. I have given 150 seconds. Can you tell what is the use of Estimate Installation/ uninstallation time in addon registration time. and error addon time is not giving at the time of installation. my installation is succes. when i start my addon then it shows addon time. but my addon is working absolutly fine.
I have tried this also. I have update insttime and uninstall time from backend (SARI Table) but still the problem persist.
Message was edited by:
Manish Chourasia -
Session time out up to # hours for Interaction center
Hi Experts,
I want increase the web ui session time out up to # hours. I tried using SMICM and Technical Profile. But using these options i could not achieve such long session. I tried using RZ 11 icm keep alive parameter, but the effect will apply for all the applications in the CRM WEB UI.
I want do this for only Interaction center application not for all other application in CRM WEB UI .
Please help me how I can do this.
Thanks
DineshHi Dinesh,
This cannot be achieved without development enhancements to some standard SAP framework component, to introduce a "keep-alive" concept. If you are using a CMS for CTI or email integration, you need to ensure it supports keeping the communications session alive also.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com -
Performance issue in Report (getting time out error)
Hi experts,
I am doing Performance for a Report (getting time out error)
Please see the code below and .
while looping internal table IVBAP after 25 minutes its showing time out error at this poit ->
SELECT MAX( ERDAT ) .
please send alternate code for this .
Advance thanks
from
Nagendra
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC <> 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
ENDLOOP.Hi Nagendra!
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
check ivbak is not initial
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
avoid select widin loop. instead do selection outside loop.u can use read statement......and then loop if required.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
endloop.
U have used many select queries widin loop-endloop which is a big hindrance as far as performance is concerned.Avoid such practice.
Thanks
Deepika -
Time out error while executing BW query from SRST
Hello Experts,
While running a query from SRST t-code im getting time out dump.
Is there any possibility to run the query in background to avoid dumps, apart from taking the report and executing from SE 38
Regards,
Arjun Reddy.Hi,
Your target may have huge and report may be trying to extract whole data.
please try to your report with some selections/filters and check it.
it may work.
Thanks -
HP Color LaserJet CP1520nw will not connect to network (time out repeatedly)
My HP LaserJet CP1520nw won't connet to my wireless router upon installation, no many how many times I've been asked to connect it to the computer via a USB printer cable. I uninstalled and reinstalled all software, and each time I try to set it up for wireless connectivity by connecting my computer and the printer via a USB printer cable, it gets to 99% installed on the progress bar and sits there until it times out. I suspect one of the follow but am open to other ideas from those more knowledgeable:
1. Is the printer locked onto some old, initial configuration from a previous wireless network that needs to be purged of addresses, etc. before it can accept the new ones?
2. Could my WPA WPA2 PSK AES encrytion be messing it up? Are the modern firmware and updates designed to accept these ? I never have gotten to a screen where it asks for my encyption key or even a WPS pass phrase. What to do if so?
3. Could Church Lady be correct and that it is Satan preventing the installation? If so, what icons does he use to watch out for and will my Norton anti-virus and malware quarantine him to Hell automatically or does it require manual enforcement?Hi @Marvalina1968,
Welcome to the HP Forums!
I noticed that your HP Color LaserJet CP1520nw will not connect to network with Windows 7. I am sorry to hear this, but happy to help!
First to answer your questions:
It is possible the printer could be locked to an old configuration and needs to be reset.
I don't think your WPA WPA2 PSK AES encrytion could be messing it up, unless you got some really strange characters in your password.
Your Norton antivirus, could possible be causing the installation to fail.
Please take a look through the following guides:
'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
Printer Does Not Maintain Wireless Connection.
If the guides do not resolve the issue, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Disable antivirus software.
Disable any firewall programs. Turn Windows Firewall on or off.
Re-install the software. HP LaserJet Full Feature Software and Driver.
Hope this solves your problem, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Dear experts,
We are using Time out time setting in IP. We made it as 10 mins. we made this setting for successfully running the process chain where other events are waiting for this process to finish.
that means it has to fail if the time of IP exceeds 10 mins. But this is not failing eventhough it exceeds 10mins...what could be the reason?????
Please share ur valueble thoughts....
Thanks in advance
bhaskarBhaskar,
Waiting Time Until Status Incorrect
The system sets the traffic light in the Monitor to red if the maximum wait time has elapsed since the last IDOc entered the system for this request.
--> Using this option we can stop long running request with out any updates/idocs. This option not to stop running loads.
Hope it Helps
Srini -
File Upload extension that doesn't time out?!
Can anyone recommend a good File Upload utility that won't
time out on a
shared server? Ideally ASP/VBScript.
Restrictions on our shared server mean that we only have 15
seconds to
execute a script.
My concern is that this just isn't going to be possible on a
shared server
because if someone wants to upload a 3MB image then it's,
naturally, going
to take more than 15 seconds.
Would appreciate any advice, thanks.
Regards
Nath.This is not a script issue, but a server issue. You would
need to talk to
your host.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"tradmusic.com" <[email protected]> wrote in
message
news:fu1qrl$r6e$[email protected]..
> Can anyone recommend a good File Upload utility that
won't time out on a
> shared server? Ideally ASP/VBScript.
> Restrictions on our shared server mean that we only have
15 seconds to
> execute a script.
>
> My concern is that this just isn't going to be possible
on a shared server
> because if someone wants to upload a 3MB image then
it's, naturally, going
> to take more than 15 seconds.
>
> Would appreciate any advice, thanks.
>
> Regards
> Nath.
> -
Message Mapping - connection time out
Hi ,
I hae just created a message mapping and when I click on Test tab and load a payload in source and try to test the mapping , it gives me connection time out error from java...
What could be wrong ? Mapping involves an XML to IDOC .
Cheers,Hello,
I think so (Experts, please correct me if I'm wrong). Before, we had a scenario in which the external definition was about 960kb. It really did post issues when testing in the message mapping itself. There are three options:
a.) Use less detail in your sample message mapping, in this way you can correct the error in the mapping itself.
or
b.) Test in operation mapping, and then do the correction in message mapping afterwards. If the testing is successful, make sure that you don't click the drop down icon. Instead, export the result as a zip file and then extract it. (if this hangs, go for c)
or
c.) Test at runtime
Hope this helps,
Mark
Edited by: Mark Dihiansan on Dec 20, 2010 10:09 AM -
Hello Experts,
The user selected Purchase Order ALL and ran the query with wild search, it contains around 40K POs showing in Active query list. When he wants to access these POs by cliking on hyper link ALL (40451). Its going to Time out error, because requestor number is missing.
Kindly throgh some light how to clear this filter.
Highly appreciated for prompt responses.
Regards,
Suneel KumarHi Poonam Patil,
Try to provide BELNR and GJAHR in where condition...
BKPF-DBBLG ==> BSAK-BELNR
Also check
BKPF-BLDAT ==> BSAK-AUGDT
Check out above relation...
If data is there in these fields of the table and both are matching then you can pass it and as they are in primary key of BSAK it will improve the performance...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya -
Hi all,
We are facing a time out error uisng webdynpro.
The webdynpro application is mapped to the enterprise portal for the users.
When ever the users loads the application and first click on the link then again loads the application and click any link(as clicked previously) then the application returs time out error.
I am little confused as not known the error is a portal one or webdynpro error.
Requesting experts for a say on this.
thanksHi,
You can try this...
Re: TimeOut
Cheers,
Kris. -
Query runs slowly and times out in CF 8
I'm trying to run this query using Coldfusion 8 and MySQL 5.
If I run the query directly off the database the results are
returned very quickly.
If I run the query through CF 7, it's pretty slow but still
runs. If I run the query through CF 8 it takes FOREVER, then times
out.
Any ideas what could be going wrong here?
I'm no DB expert. But if the query can run quickly directly
off the DB OK, but then bombs out in CF 8, that the problem might
be with CF 8 itself?
<cfquery name="theOrders"
datasource="#Application.ds#">
SELECT o.orderid, o.dealer, o.dealerRep, o.dealerPO,
o.dealerShippingInstructions, o.dealerFreightCollect,
o.othershipping, o.billoflading, o.carrier, o.othercarrier,
o.serialno, o.ShippingDate, o.Shipping, o.ShippingTotal,
o.SaleSubTotal, o.SaleTotal, o.Tax, o.Discount, o.DiscountRate,
o.Status, o.DateIn, o.bFirstName, o.bLastName, o.bAddress1,
o.bAddress2, o.bCity, o.bState, o.bZip, o.bPhone, o.sFirstName,
o.sLastName, o.sAddress1, o.sAddress2, o.sCity, o.sState, o.sZip,
o.sPhone, o.sPhone2, o.Message, o.dealerShippingInstructions,
o.bCompany, o.sCompany, o.bEmail, o.ipaddress, o.oAuthorization,
o.CCType, o.CCNum, o.CCName, o.CCYear, o.CCMonth, o.entryDate,
i.RelProductID, i.Quantity, i.RelUnitPrice, i.Shipping, i.Discount,
i.title
FROM tblorders as o, tblorderitems as i
WHERE o.OrderID=i.Relorderid
ORDER BY OrderID ASC
</cfquery>The server monitoring tool that is built in CF8 can help
debug this issue quickly. It can give you report about query
execution time, time taken by a tag to execute and lot more other
details.
You can launch sevrer monitoring via CF Administrator.
Maybe you are looking for
-
Where can I find a detailed tutorial on how to use iTunes for Mac?
I need to get a really good tutorial on iTunes for Mac 12.0.1.26. I am really hung up on being able to download artwork for 2 Albums that I have recently purchased. I have been using Macs since the 128K Classic. However I never got into using iTunes
-
Link India Localization with Blanket Purchase Agreements and Releases
Could anyone highlight on how India Localization Taxes be linked with Blanket Purchase Agreements and Blanket Releases? Any additional Setups required? Shubhendu Chakraborty Kolkata.INDIA.
-
Mpg files put into final cut pro 6 come out blurry in Quicktime export.
I'm a noob. I'm trying to make a compilation of mpg files. My students created animations in Blender. I want to put a video together to showcase their talents. Everything I've tried with FCP 6 and mgs come out blurry. Mpg Dimensions are 640 x 480. Co
-
Problem in triggering the correct workflow on AdobeForm submission for PCR
Hi All, I am facing a problem involving triggering of workflows through Adobe form submission. I have created a scenario for "Employee seperation" in QISRSCENARIO transaction and assigned it to an approval workflow. I have also activated and assigned
-
Wifi issue, very annoying
First I would like to say hi to all forum members. I'm Mike from NJ. Recently I dumped my Windows PC and decided to finally make the switch. After many years of debating I couldnt be happier. Long story short, my wifi tends to be finicky about connec