Hi expert,Delivery save as Draft.

Hi,
I want to Add Delivery as Draft automatically using coding when i click on Add button on delivery.
Thanks
Rajkumar Gupta
Edited by: Rajkumar Gupta on May 29, 2010 4:58 AM

Hello,
Yest it is possible,. I have posted example for sales orders, you can use this
Prevent Add in System Form
regards
J

Similar Messages

BPM - Save as draft

Hi Experts,
Customer creation in MDM using Webdynpro Java UI, Webservice and BPM for approval process.
Scenario -"Save as Draft" :
Requestor fills in the form and save it as draft. Draft requested are accessed again through uwl inbox.
We are planning to create BPM Workflow and store the data in BPM context.
Experts, Is there is any other best approach for the above scenario
Thanks,
Best Regards,
Arun

HI Arun,
You can create a seperate table for holding the Draft data which have a column say STATUS. When ever user do 'Save as Draft' update the table with STATUS value say 'D'(Draft).
When user open a Request Form let the Draft table be shown first(if there is any rows in the draft table for the respective user with STATUS='D') where the user is given an option to work on the existing draft item or create a new Request. On submission of the form first set STATUS column value to say 'S'(Submitted), then trigger BPM Approval workflow. If you are putting too many data in BPM context , as John told it will affect the performance.
Regards,
Unni
Edited by: UnnikrishnanSreekumar on Oct 12, 2011 2:06 PM

Can packaging save as draft?

Hi Develope exports,
   My B1 Ver. 2007B(PL13). I fond that till this version, Packaging can't save as draft.
   I create an A/R Invoice and save it as draft ,with a Packaging appended. When I open the Invoice draft, right click and reopen packaging form, it shows nothing. I must have to refill all the packing details.
Even on Delivery Document, the packaging can't save as draft.
   It doesn't make sense . Will it be fix up by next PL?
Thanks in advance
Best Regards,
Liang xiao qing

Hi,
You would be able to save a sales order as draft only while the add button is active that is you haven't added the sales order. Once you have added a sales order in the system, the save as draft button would be disabled. However, as you say that you have duplicated the sales order, before adding, you should be abe to save tat order as draft. if this is not the case, i think you need to raise a ticket to sap. Try searchin for SAP Notes on the same.
Thanks,
Joseph

Save as drafts

Hi Experts
I have created a form and my requirement is i had to keep an option to save as draft, is it is possible , if so kindly help me.
Regards
Shibin

Hello
If it is using an individual UDO tables, you must define 2 times the structure, one as draft and one as real document. There is no automatic function for it.
Regards
János

How can you save a draft SMS on X3-02 ?

How can you save a draft SMS on X3-02 ?
Can't seem to find an option to do this ... Lost message typed half way when I got out of the editor to check the calendar.
Am I missing something or has Nokians obsoleted this function on the latest S40 platform ?
Solved!
Go to Solution.

Hi all,
Like sudude here pointed out that's one way of leaving text as "draft" to message editor. Or you can also select Options > More > Exit editor to do the same. And, next time when you select Create message that previous text should be there as it was left.
But there is also another option to start writing SMS's - with Notes application. Select Menu > Apps > Notes. Write a note and save it. Then for that note select Options > Send note > Send as message. Now your note is copied to message editor and you can send it or further edit and then send. Neat thing here is that when you use Notes application, text can be saved for later editing or use.
-ThreeOs

As soon as I type in subject line of email, it tries to save as draft and crashes.

I'm running Windows 8 on a ASUS laptop (new within the past few months). I access iCloud mail from my PC, iPhone and iPad Mini. The problem only happens using iCloud Mail on my PC.
Just within the past few weeks, as soon as I begin typing a subject line in mail, I get a pop-up question "Save this message as a draft?"
If I Don't Save it, it kicks me out of the message.
If I Cancel it, it takes me back to the message, but asks me again with the next key stroke and keeps asking until I move out of the subject line. So I am being constantly interrupted while I'm in the subject line.
If I Save it, it does save, but closes the message.
It appears that Don't Save and Save are doing what they are supposed to, but Cancel just takes me back to the message only to be interrupted over and over.
Is there some way to get it to quit prompting me to save a draft?

I belive the issue is with quotes..try removing the double quotes " " or try using single quotes ' ',either removing the quotes completly or using single quotes should work..let us know if it works..

Save in draft folder - problem

As I understand it, the save in draft folder function is supposed to appear only for XDP forms. We have a PDF form where the submit button in the form is set to submit as PDF. And yet, the save button still appears in workspace container. If a user selects the save button and later opens the form/task, the form is converted to XML and unviewable.
Within the UserServiceV2 activity, I do not check off the "Reader Submit - Submit via Reader" checkbox. All of our users have acrobat.
Is there some way for the function to work with PDFs? If not, is there a standard workaround to offer that feature to end users?
Thanks

Hi Livecycle Architect,
Did you ever resolve this issue? I have a part of the problem that you describe here. While all my forms are submitted as XDP, if we save a form to Drafts, when we open it latter it shows XML and the form is unusable.
Any pointers will help.
Thanks

Save as Draft Problem using library computer

This afternoon I tried to save-as-draft a LONG & INVOLVED communication in .MAC e-mail at a public computer in the library. When I went to my draft folder to ensure it got saved, it was not there. Can someone give me direction on this? I suppose it goes without saying how mad and upset I am. Thanks in advance for any light you can shed on this issue.

Hi kvs2,
You did log into .Mac mail online to check your Drafts folder there - right?
Not the Drafts folder on your machine at home...
When you click Save as Draft online, there should be a small green spinning wheel in the left side of the bar between the icons at top and the To:
Also a confirmation "Your message has been saved to Drafts" along with a green checkmark will appear and then slowly fade away in that same spot.
Regards,
John

Where is 'save as draft' icon in Mail?

Mail Help says to click the Save as Draft icon to save a message you're working on. But I cannot find the icon anywhere. I know that it saves automatically anyway, and that Apple-S saves as a draft. But, if Help says to use the icon, I would think that means there is one. I'm so used to that icon from previous Mail versions that I would prefer it to the Command-S or just hoping the autosave works. Anyone know if this icon referred to in the new Mail's Help exists?

Save and send draft messages
If you’re composing a message and want to finish it later, you can save it as a draft. Mail saves drafts automatically a few seconds after you start to compose a message. If you quit Mail while an unsent message is open, Mail saves it as a draft automatically.
HideSave a message as a draft
Click the Save As Draft icon in the toolbar or choose File > Save.
You can continue working on the message at any time. Just open the mailbox where you store drafts and double-click the message.

BB is not giving me option to send but only save in draft.

I have a BB Curver 8300. Some mails when try to reply, BB is not giving me option to send but only save in draft.
I tried deleting Service book and resending it is not working..
I took backup and then Wiped the Handel, restored the backup. Still no luck..
Pl advice. Thx
My carrier is LoopMobile

Only some mail? Most likely that email not giving you that option was enabled by the service book(s) you deleted.
Try sending your Service Books again.
On your BlackBerry device, go to:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site:
From your handheld device:   http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

DO with selected batch info save as draft at 2007B

Hi,
Under 2005B version:
For DO with selected batch information save as draft, when open the draft DO, the selected batch info is gone.
Under 2007B version:
For DO with selected batch information save as draft, when open the draft DO, the selected batch info is there, is anyone know which table is stored this information?
Thank you.

Hi,
You can refer to following tables ODIB and OIBT and check if you get what you are looking for.
Regards,
Jitin

Automate 103 movement on Inbound delivery Save

Hello,
In ECC 6.0, the 103 movement carrying serial number information cannot be performed .
Since the serial number editing is possible for inbound deliveries, it is decided to edit the inbound deliveries manually and to automate the 103-movement execution.
Is there any Enhancement/Exit/BADI available to automate 103-movement on Inbound delivery save?
Regards,
Vanita
Edited by: Vanita Ghalme on Nov 16, 2009 4:50 PM
Edited by: Vanita Ghalme on Nov 16, 2009 4:51 PM

Hi,
You can use the user exit MM06L001 for your own score determination for 'On-Time Delivery' Below is the link which gives idea about how to create and activate the user exit for your requirement.
http://scn.sap.com/docs/DOC-25273
Amit.

Why is "save as draft" missing

What has happened to "save as draft". It is not present when I try to customize toolbar. It was such a useful tool when one was interupted during composing email.
David Thomas

It's no longer needed. If you are writing an email, Mail constantly saves the state. If you close the email before sending, it'll ask you if you want to save it as a draft or discard it. If you quit Mail before sending it, it'll reopen the draft when you next open Mail.
Use either the Cancel button or CMD-S to Save as Draft.

Enable "save as draft"

Does anyone know how to enable "save as draft" for a form in workspace?

What is the type of your input form variable?
For me, XFAForm renders with save in draft folder option enabled; but DocumentForm is not. Just make sure to have an XFAForm type.
-Nith

Ignore Save as Draft just consider Add Sales Order

Dear all,
I got a problem that the following code:
If BusinessObjectInfo.FormTypeEx = "139" And BusinessObjectInfo.EventType =                              SAPbouiCOM.BoEventTypes.et_FORM_DATA_ADD Then
If BusinessObjectInfo.BeforeAction = False And BusinessObjectInfo.ActionSuccess Then
XXXXXXXXXXXXXXXXXXXXX
End if
End if
I just want to assign a value to the field before user "Add" Sales Order. However, even though user didn't ADD the Sales Order and just Save As Draft but program still run into the ' IF Statement". How can i ignore the above process when user press "Save As Draft".
Please help.
Regards,
Anna

Hello Anna,
You can filter it with BusinessObjectInfo.Type
Object ,             ObjName , ID
Document draft ,   DRF         , 112
Sales Order     ,     RDR ,          17
Regards, Yatsea

Hi expert,Delivery save as Draft.

Similar Messages

Maybe you are looking for