Hi Expert, Using DI -Server configuration Problem in Web-base application

Hi Expert,
I am creating Web-base application using ASP.net.
Scenario 1-
Machine A i installed SAP B1 + DI-SERVER Service Manager IIS SERVER + B1WS
On This machine my application working fine.
Scenario 2-
Machine A i installed DI-SERVER + IIS SERVER + B1WS. with static ip address(111.192.11.112)
Machine B i installed DI-SERVER + Sql server DB + Service Manager-This on local network(192.168.1.119) in same static ip address(111.192.11.112)
when Login to company using web services i am getting error "111 Failed to Connect to SBOCommon Login"
If any one have solution.please reply
Thanks in Advance.

Hi, Gordon
my scenario is,
Main machine on static ip - accessing saleorder.aspx page of asp.net where is deployed B1WS,DI SERVER , IIS server & saleorder.aspx
In network machine - Service Manager, Database.
This is above my scenario .
Thanks
Rajkumar G
Edited by: Rajkumar Gupta on Jan 19, 2011 11:19 PM

Similar Messages

Can I use SPRO to configure SAP CRM web based application.

Hi,
I am just 5 days old in SAP solutions.
I want to know if I can use SPRO (IMG) to configure master data and business processes pertaining to SAP CRM web based solution ?
Regards,
Diptendu.

Hi Diptendu,
You can indeed do some customizing in the SPRO regarding for example the PCUI (People Centric User Interface) of CRM.
Within SPRO take CRM and afterwards in the Basic Functions you have some customizing to be done. You can also look at the cookbook for the PCUI, which you can find on the service.sap.com/crm-inst site.
For the Interaction Webclient, there is a specific part for customizing in the SPRO under CRM --> Interaction Webclient.
Hope this helps,
Kind regards,
Micha

Cannot set Start Mode using SQL Server Configuration Manager

I have SQL Server 2012 Express installed on Windows 8.1 and am trying to change the Start Mode to Manual using SQL Server Configuration Manager. However, when I open the Properties dialog and use the drop-down for Start Mode on the Service tab the drop-down
is inoperative. A "vertical bar" appears but no options.
Is there some other way that I can change the Start Mode?

I have SQL Server 2012 Express installed on Windows 8.1 and am trying to change the Start Mode to Manual using SQL Server Configuration Manager. However, when I open the Properties dialog and use the drop-down for Start Mode on the Service tab the drop-down
is inoperative. A "vertical bar" appears but no options.
Is there some other way that I can change the Start Mode?
I have seen that on my laptop as well and it was due to display /resolution setting. Please see if that helps you. BTW, as already answered, services.msc is another way of changing it.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Forms Server configuring problem

Hi,
I've installed Oracle Forms Server 6i on Windows platform and installed Apache 2.2.
The virtuals folders are configured correctly in Apache and file permission settings are all done correctly.
All the environment variables appears to be okay in registry.
When I try to test the Forms Server using runform.htm with the provided test.fmx,
the form is not executed but the browser tries to download the file, which seems to be the renamed ifcgi60.exe file, by looking at the size of the file. (51.5kb)
I tried using both socket and HTTP mode with same port number and they behaviours the same.
Am I missing some configuration somewhere?
Does anybody had similar experience like this?
Please help.
Thanks in advance.
Edited by: user11202617 on May 26, 2009 2:49 PM

Well, I think it is very important to mention that Forms/Reports 6i has been desupported for years. So, this probably isn't the best version to be using, both because Oracle will not offer much assistance any longer with that version and because that product version is based on old technology.
That said, here are some things to consider:
1. Apache 2.2 was never certified for use with Forms 6 and further more many issues were reported when attempts were made to use this version. Apache 1.3 is the recommended and previously supported version to be used with Forms 6.x
2. ifcgi60.exe is not a renamed version of your form (i.e. test.fmx). It is the cgi module used to generate the needed html to send to the client and eventually start the jre which starts the form. (it's a little more complicated than that, but that is the basic process). If you are getting a download option when calling the cgi module, is likely means that you have not correctly configured Apache to run it.
To the best of my knowledge, the only way to use your own web server (rather than using Oracle Application Server) was to call Forms apps using a static html file. I do not believe that there was any supported way in which you could use the Forms Servlet or CGI. It probably can be done but I don't think it was supported. To start with Apache must know where executables can be found, in other words the CGI (exe) file. Here is an example of what the directive in Apache would look like:
ScriptAlias /dev60cgi/ "C:\ORACLE\806\tools\web60\cgi/"
In the above example, you would need to ensure that the ifcgi60.exe was located in the directory shown above. In the url used to call the form (assuming you wanted to use cgi) you would include the /dev60cgi/... Of course the exact directory and virtual path name is up to you as long as you know how to correctly set everything else.
Anyway.... I can go on and on. Configuring your own web server to work with Forms is not really recommended. Using Oracle Application Server 1.0.2 was the better way to do this back when it was still supported.
If you plan on continuing down this path, I would recommend that you refer to both the Apache documentation and the Forms 6 documentation, which for now, is still available:
http://www.oracle.com/technology/products/forms/techlisting.html

Using SQL Server credentials with Secure Store Target Application for Data Connection in Dashboard Designer

[Using SharePoint 2013 Enterprise SP1]
I would like to use SQL Server credentials in a Secure Store Target Application, and
this page makes it look like it's possible but when I attempt to use the new Target Application ID as authentication for a Data Connection in Dashboard Designer, I get a generic "Unable to access data source" with no error logged in SQL Server
logs.
I am able to use a Target Application with AD credentials to access the SQL db without a problem. Suggestions?

Hi,
1. Make sure that the credential is set to
Secure Store Target Application. Navigate to the Central Administration. Click on the
Application Management. Click on the Manage Service Applications. Click on the
Secure Store Service Application. Select the application ID and from the ECB menu click on the
Set Credentials. Enter the Credential Owner, Windows User Name and the
Windows Password.
2. Make sure that in the Dashboard Designer “Use a stored account” is selected in the “Authentication” and the proper application ID is mentioned.
Please refer to the link below for more information:
http://www.c-sharpcorner.com/Blogs/14527/unable-to-access-data-source-the-secure-store-target-applic.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Using a Deployable Proxy in a Web Dynpro Application

Hi,
We have a Web Dynrpo application whose model is built from a set of Java business objects (POJOs.) These Java business objects currently make calls to a back-end R/3 system using JCo. We would like to provide the ability to allow the calls to be made over Web Services to the back-end system.
To call the RFMs as web services we have created a Deployable Proxy project, added the proxy as a public part, then referenced that public part in the web dynpro application. At this point we can write code to call the web service that looks something like:
InitialContext ctx = new InitialContext();
Object serviceObject = ctx.lookup("wsclients/proxies/meridium.com/rcmo~proxies/com.meridium.rcmo.ws.proxies.plants.PlantProxy");
Z_MRDM_GET_PLANTSService service = (Z_MRDM_GET_PLANTSService)ctx.lookup("wsclients/proxies/meridium.com/rcmo~proxies/com.meridium.rcmo.ws.proxies.plants.PlantProxy");
Z_MRDM_GET_PLANTSPortType port = service.getLogicalPort();
Z_MRDM_GET_PLANTS plantParameter = new Z_MRDM_GET_PLANTS();
plantParameter.setI_PLANTID(id);
plantParameter.setI_PLANTNAME(name);
Z_MRDM_GET_PLANTSResponse response = port.z_MRDM_GET_PLANTS(plantParameter);
MT001W[] plantArray = response.getET_PLANTS();
The problem is that when I call looup to retrieve the service implementation I get a ClassCastException.
The tutorials for using a proxy in web dynpro all assume that the web service is what the model is based upon but that's not possbile for our scenario we need to call the proxy from the business objects which are the basis for our model.
According to the help documentation for consuming a deployable proxy in a JSP page:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b9766df88f4a24967dae38cb672fe1/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/2d/b9766df88f4a24967dae38cb672fe1/frameset.htm</a>
It discusses adding JNDI mappings. Is this what's needed for the reference to work in a Web Dypro application too? If so, how would one add the JNDI mappings references to a Web Dynpro application?
Many thanks!

Hi Dheeram,
I'm not certain about JSPDynpage specifically, but in a general J2EE Enterprise Application project you can add a reference to the application-j2ee-engine.xml file. For example here's the content of an application-j2ee-engine.xml file that references a proxy:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE application-j2ee-engine SYSTEM "application-j2ee-engine.dtd">
<application-j2ee-engine>
 <reference
 reference-type="hard">
 <reference-target
 provider-name="sap.com"
 target-type="library">com.sap.mw.jco</reference-target>
 </reference>
 <reference
 reference-type="hard">
 <reference-target
 provider-name="sap.com"
 target-type="library">com.sap.aii.proxy.framework</reference-target>
 </reference>
 <reference
 reference-type="hard">
 <reference-target
 provider-name="sap.com"
 target-type="library">com.sap.aii.util.misc</reference-target>
 </reference>
 <reference
 reference-type="hard">
 <reference-target
 provider-name="sap.com"
 target-type="interface">tc/sec/destinations/interface</reference-target>
 </reference>
 <reference
 reference-type="hard">
 <reference-target
 provider-name="sap.com"
 target-type="library">security.class</reference-target>
 </reference>
 <reference
 reference-type="weak">
 <reference-target
 provider-name="sap.com"
 target-type="service">tc~sec~destinations~service</reference-target>
 </reference>
 <reference
 reference-type="weak">
 <reference-target
 provider-name="sap.com"
 target-type="interface">tc~sec~destinations~interface</reference-target>
 </reference>
 <reference
 reference-type="weak">
 <reference-target
 provider-name="engine.sap.com"
 target-type="service">webdynpro</reference-target>
 </reference>
 <reference
 reference-type="weak">
 <reference-target
 provider-name="meridium.com"
 target-type="application">rcmo~proxies</reference-target>
 </reference>
 <provider-name>sap.com</provider-name>
 <fail-over-enable
 mode="disable"/>
</application-j2ee-engine>

Value hep problem in web dynpro application

Hi All,
I have a requirement where I need to add a field for alternate payee to the web dynpro application and the field name is BSEG-EMPFB. I have written the following code to get the values of it based on the vendor number:
SELECT SINGLE * FROM lfb1 INTO f4lfb1_z
                  WHERE lifnr = lv_lifnr
                  AND   bukrs = '001'."bseg-bukrs'.
CALL FUNCTION 'FI_VENDOR_ALTERN_PAYERS_READ'
    EXPORTING
      i_lifnr            = lv_lifnr
      i_filkd            = filkd
      i_bukrs            = '001'
      i_lfb1_head_office = f4lfb1_z
    TABLES
      t_zemtab           = t_zemtab.
LOOP AT t_zemtab INTO w_zemtab.
    ls_value_set-text = w_zemtab-empfb.
    ls_value_set-value = w_zemtab-empfb.
append ls_value_set to lt_value_set.
DATA lo_nd_alt_payee_info TYPE REF TO if_wd_context_node_info.
DATA lo_nd_alt_payee TYPE REF TO if_wd_context_node.
lo_nd_alt_payee = wd_context->get_child_node( name = wd_this->wdctx_alt_payee ).
lo_nd_alt_payee_info = lo_nd_alt_payee->get_node_info( ).
         lo_nd_alt_payee_info->set_attribute_value_set(
            name = `ALTERNATE_PAYEE`
            value_set = lt_value_set )
Now the problem is user wants the details of the alternate payee as F4 help and when I debugged the standard FV60 functionality this how the F4 help is being build therE:
REFRESH fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'EMPFB'.
fldtab-selectflag = 'X'.
APPEND fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'NAME1'.
APPEND fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'ORT01'.
APPEND fldtab.
CLEAR fldtab.
fldtab-tabname    = 'IZEMTAB'.
fldtab-fieldname = 'STRAS'.
APPEND fldtab.
*------- Fill Values for Function Module Call --------------------------
REFRESH valtab.
LOOP AT zemtab.
    valtab-feld = zemtab-empfb.
    APPEND valtab.
    valtab-feld = zemtab-name1.
    APPEND valtab.
    valtab-feld = zemtab-ort01.
    APPEND valtab.
    IF zemtab-stras NE space.
      valtab-feld = zemtab-stras.
    ELSEIF zemtab-pfach NE space.
      CONCATENATE 'Postfach:'(019) zemtab-pfach INTO valtab-feld.
    ELSE.
      valtab-feld = space.
    ENDIF.
    APPEND valtab.
ENDLOOP.
*------- F4 Dialog -----------------------------------------------------
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
    EXPORTING
      display      = space
      fieldname    = 'EMPFB'
      tabname      = 'INVFO'
    IMPORTING
      select_value = empfb
    TABLES
      fields       = fldtab
      valuetab     = valtab.
IF NOT empfb IS INITIAL.
    invfo-empfb = empfb.
ENDIF.
can you please tell me how can I accomdate this in the web dynpro application?
Thnaks,
Edited by: rajatg on Jul 13, 2011 6:41 PM
Edited by: rajatg on Jul 13, 2011 6:42 PM

Hi Raja,
Search help is availble at dictinary level you get F4 help automatically.
Otherwise create OVS help for alternate payee. use WDR_OVS.
check this..
http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
/people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap
Cheers,
Kris.

How to make use of Portal service in the web dynpro application

hi
I have some portal service and how to use that in the web dynpro application.
and also what is the main diff between Portal Component and web dynpro application.
do we required portal to run web dynpro application.
thanks
mmukesh

Hi,
>> I have some portal service and how to use that in the web dynpro application.
Yes. U can use Portal service in webdynpro. Check the link given by subathra.
>> and also what is the main diff between Portal Component and web dynpro application
Portal Components are components designed to run in portal server while webdynpro application can run in J2EE WebAS.
>> do we required portal to run web dynpro application.
No for general cases. Just WebAS is sufficient to run webdynpro appl. But if u use portal service in ur webdynpro appl, then make sure both (portal service and webdynpro appl) run on same J2EE engine. That is mandatory.
Regards,
Vijai

Problem deploying Web Dynpro Application Definition

Hi,
I have written a Web Dynpro and then deployed it to an EP6 NW04 server without first defining the Web Dynpro Application (silly me, I know - how could I do such a thing?). Anyway, afterwards, I created the Web Dynpro Application definition, but no matter how many times I redeploy, it does not add it to the Web Dynpro now sitting on the server.
Können Sie mir bitte helfen?
Martin

Hi
Martin,
Although server is being maintained by third part(one option is though visual admin since you can't access it) other option is use youe web browser with url http://your server IP address:50000/index.html u will find webdynpro link as mentioned below
Web Dynpro
Web Dynpro is a User Interface technology available within the SAP NetWeaver Developer Studio.
Various Web Dynpro tools provide administrators and application developers with performance measurement and application administration capabilities. The Web Dynpro runtime is already deployed.
Now Click on Web Dynpro link
you will find Content administrato and web Dynpro administrator u will b directed to login page after entering with UID and passwd u can see all deployed applications ( u can check ur application) and details...
I hope this may help u..
RK

Oracle*Terminal configuration problem for Web deployment

Hello everyone!
I am a novice in using Oracle Forms 6i. I installed a Forms 6i Developer and Server at Windows 2000, the same machine where 8.1.6 Server is running (of cource I installed DB server and Developer in different Oracle_Home's).
Everything seems to be going well while trying "Client-Server" model. But I can not suceed in deploying forms to the Web. For example when I try "Run a form on the Web" standard option, after I try to run a standard test form (test.fmx), I get another Browser (IE5) window opened, then an applet loads and after that I get a Java-form inside of IE5 window with red bell picture and an error message: "Error while opening Oracle*Terminal file fmrweb."
Can anyone help me with an advise what to do in such situation?
Thank you in advance
Alexander Ilin

I can't answer the specific problem about the test, but the resource file is set up as follows:
The html file that invokes the Forms applet has a server argument showing where the terminal key-mapping file is stored on your forms server. In your case it appears to be looking for fmrweb.res and can't find it.
Take a look at the html and find the path it is using to look for it (I think you'll find this in the ServerArgs parameter). Then make sure the file is there on your Windows 2000 server.
If it isn't there, do a search for it in the server's Oracle_home directory, and then copy it to the directory where it is expecting it. Along with fmrweb.res, you can also use fmrpcweb.res - just replace fmrweb.res in your html file.
Hope that helps.

Oracle or MS SQL Server, EJB Models and Web Dynpro Application

Hi
I've a table in MS SQL database. I've created in Visual Admin, the datasource(jdbc/MyAlias) for the above. SQL Server has Employee Table with EmpId, FirstName, LastName and Description as its Columns.
I want to display, modify , insert and delete entries from the Employee Table using web Dynpro. For this we have used JDBC method by which we create class file which will have JDBC connectivity and logic for getting data from backend. This class file then used for display, update and other operations. And the context is built at design time.
This is not proper method, as this doesn't come under perview of MVC concept.
I want to use EJB Models for this case. But I'm stuck with some problems.
1. How do I implement EJB models in this scenario.
2. How do EJB module (entity bean) connects to external database.
3. What are the most logical steps to be used in this case.
Any pointers for this will greatly appreciated with points?
So far I was able to do create EJB module of Entity Bean type with all interfaces. But beyond this I'm not able to proceed. Do let me know the step wise procedure for this kind of scenario.
Thanks
Srikant

Hi Srikant,
I have worked on similar stuff, but the scenario was a little different. I worked on creating Web Services using EJBs, but the basic part was that, the web service was supposed to interact with the SQL Server database. So maybe I can help you...
First thing which is needed is that you have created the JDBC Connector in your Visual Administrator correctly. If you wish to cross check, you can see my answer in the following thread:
JDBC error
In this thread itself I have given the code which is the solution to your problem (this is what i believe). I am pasting the code again:
InitialContext initialContext = new InitialContext();
DataSource dataSource = (DataSource)initialContext.lookup("jdbc/MyAlias");
java.sql.Connection connection = dataSource.getConnection();
You can use this code in the method of your EJB, and then you can easily use this connection object to access your database tables using SQL queries.
And if by any chance you are looking for a step wise procedure for creating a web service from an EJB, then give me your email address, i will send you the doc.
Bye
Ankur
Do reward points if it helps!!

Using different databases for an ADF web fusion application

Hello all
Here is the thing. Following some steps in a book developing an application, and I gotta say looks really good, so I thought why not just change it a bit and use it for the company I work for. Main problem is, the book uses the HR schema, and I wanna use the company's database. So can this be done and what damage should I be looking at? What are the areas I will have to fix?
Thanks in advance all

dino2dy,
What are the areas I will have to fix?Not much, just the database design, business components, screen layouts, security, task flows, and business logic (in other words, just about everything)
The best thing to do would be to learn from the book how to develop such an application and then use what you learned to develop your app. There may be utility classes/techniques/layouts/etc that you could reuse from the book perhaps.
John

How i use nwdi to modify existing standard web dynpro application

Hi,
I need to change some existing application of web dynpro Java. I found solution nwdi would help in that. But how i use it can any one explain me in detail. Nwdi has already installed over here. So can i use it can explain me step by step.
Regards,
Gurprit Bhatia

Hi,
First you need to import the WD application to your NWDS and then you need to checkout the code for making any changes after making the chanhes you have to checkin the code.
First you need to setup the portal path in
1. WIndow->Preferences->Java Development Infrastructure->development Configurations.
2. You have to create a client in DTR by going into DTR Perspective.
3. Import the configuration from the track (this is your standard WD application) in Development Configurations Perspective.
4. Create the project from Inactive DCs tab.
5. Navigate to WD Perspective and build the project.
6. Check out the code to make chnages
7. Checkin the code after making the changes
8. Test the application in Portal
Regards,
Lakshmi.

Server Error in '/drm-web-client' Application?

Hi,
I received the following error when I tried to login to the DRM web client 11.1.2.1 :
Could not load file or assembly 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Assembly Load Trace: The following information can be helpful to determine why the assembly 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' could not be loaded.
WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
Stack Trace:
[FileNotFoundException: Could not load file or assembly 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.] System.Signature._GetSignature(SignatureStruct& signature, Void* pCorSig, Int32 cCorSig, IntPtr fieldHandle, IntPtr methodHandle, IntPtr declaringTypeHandle) +0 System.Signature..ctor(RuntimeMethodHandle methodHandle, RuntimeTypeHandle declaringTypeHandle) +236 System.Reflection.RuntimeMethodInfo.get_Signature() +91 System.Reflection.RuntimeMethodInfo.get_ReturnType() +19 System.Web.HttpApplicationFactory.ReflectOnMethodInfoIfItLooksLikeEventHandler(MethodInfo m) +30 System.Web.HttpApplicationFactory.ReflectOnApplicationType() +223 System.Web.HttpApplicationFactory.Init() +11326448 System.Web.HttpApplicationFactory.EnsureInited() +55 System.Web.Compilation.BuildManager.CompileGlobalAsax() +70 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +676 [HttpException (0x80004005): Could not load file or assembly 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.] System.Web.Compilation.BuildManager.ReportTopLevelCompilationException() +76 System.Web.Compilation.BuildManager.EnsureTopLevelFilesCompiled() +1012 System.Web.Hosting.HostingEnvironment.Initialize(ApplicationManager appManager, IApplicationHost appHost, IConfigMapPathFactory configMapPathFactory, HostingEnvironmentParameters hostingParameters) +1025 [HttpException (0x80004005): Could not load file or assembly 'System.Web.Routing, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.] System.Web.HttpRuntime.FirstRequestInit(HttpContext context) +11318726 System.Web.HttpRuntime.EnsureFirstRequestInit(HttpContext context) +88 System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr) +11192488
1) Can anyone help me with fixing this error?
2) Will I lose all of the data that previously existed in this instance of DRM?
Thanks!
Version Information: Microsoft .NET Framework Version:2.0.50727.4234; ASP.NET Version:2.0.50727.4223

Hi
Please do a fetch from the database and then change the information in DRM console for the CSS parameter. This error I received only due to the CSS details in DRM 11.1.2.
Thanks
Rupak
Mantra to Win | WinMantras.com | http://hyperion.winmantras.com

OpenLDAP Server have Problems with the automounter of Mac OSX 10.5.5 client

Hi,
we are using OpenLDAP Server on a Debian OS base. I had connect the LDAP Server with the MACMini with Mac OSX 10.5.5. The LDAP Server is based on OpenLDAP running on Debian Linux.
The Users can login on the Mac Computers and they do have the right goups. I have a problem with the autompunterMaps because the homes and volumes are not mounted in the Mac environment. So the users have a different home directory at each computer and no volumes to work with.
The LDIF I use for the automounter is following:
dn: ou=automaster_directlinx86, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefe
ld,dc=DE
ou: automaster_directlinx86
objectClass: top
objectClass: automountMap
dn: cn=\/homes, ou=automaster_directlinx86, ou=autofs, ou=ai,
dc=TechFak,dc
=Uni-Bielefeld,dc=DE
objectClass: automount
automountInformation:
ldap:ldap.TechFak.Uni-Bielefeld.DE:ou=auto_homes,ou=aut
ofs,ou=ai,dc=TechFak,dc=Uni-Bielefeld,dc=DE -nosuid,nobrowse
cn: /homes
dn: cn=\/vol, ou=automaster_directlinx86, ou=autofs, ou=ai,
dc=TechFak,dc=U
ni-Bielefeld,dc=DE
objectClass: automount
automountInformation:
ldap:ldap.TechFak.Uni-Bielefeld.DE:ou=autovollinx86,o
u=autofs,ou=ai,dc=TechFak,dc=Uni-Bielefeld,dc=DE
cn: /vol
dn: ou=autovollinx86, ou=autofs, ou=ai, dc=TechFak,dc=Uni-Bielefeld,dc=DE
ou: autovollinx86
objectClass: automountMap
dn: cn=ai, ou=autovollinx86, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefeld,
dc=DE
objectClass: automount
automountInformation: -rw,intr,nolock thor:/export/ai/external/vol/&
cn: ai
dn: cn=airobots, ou=autovollinx86, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Biel
efeld,dc=DE
objectClass: automount
automountInformation: -rw,intr,nolock thor:/export/ai/external/vol/&
cn: airobots
dn: cn=mobirob, ou=autovollinx86, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Biele
feld,dc=DE
objectClass: automount
automountInformation: -rw,intr,nolock thor:/export/ai/external/vol/&
cn: mobirob
dn: ou=auto_homes, ou=autofs, ou=ai, dc=TechFak,dc=Uni-Bielefeld,dc=DE
ou: auto_homes
objectClass: automountMap
dn: cn=efrese, ou=auto_homes, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefeld,d
c=DE
objectClass: automount
automountInformation: thor:/export/ai/external/homes/staff/&
cn: efrese
dn: cn=fsiepman, ou=auto_homes, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefeld
,dc=DE
objectClass: automount
automountInformation: thor:/export/ai/external/homes/staff/&
cn: fsiepman
dn: cn=fyuan, ou=auto_homes, ou=autofs, ou=ai,
dc=TechFak,dc=Uni-Bielefeld,dc
=DE
objectClass: automount
automountInformation: thor:/export/ai/external/homes/staff/&
cn: fyuan
In the /etc/auto_master I added the line
SRC base="ou=ai, dc=TechFak,dc=Uni-Bielefeld,dc=DE" scope=ALL
filter="(&(|(objectClass=automount))"
to mount the /volumes but just the volume /vol and /homes are mounted to the Mac OS System.
Thanks.

Hi.
Have a look at http://www.afp548.com/article.php?story=20061126220622764
and there is very good information in Apple's training texts for 10.5 server.
You can buy the print book or purchase an account with Safari Books in order to read it online,
see
http://my.safaribooksonline.com/9780321591067
Chpt 3 is on working with 3rd-party OpenLDAP servers

Hi Expert, Using DI -Server configuration Problem in Web-base application

Similar Messages

Maybe you are looking for