Hi experts,could any one explain with an example of images

hi SAP  experts,could any one explain with an example of images Reverse image,update image,Delete image and Add image.

Hi,
Go thru below thread it has already discussed
Re: selection from scratch: full VS (intialize delta + delta) update bi 7.0
Assign points if it helps you
thanks

Similar Messages

  • Could any one explain me this code pls

      IF sy-subty O print.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
              mode                   = 'BATCH'
             no_dialog              =  'X'
            IMPORTING
                 out_archive_parameters =  arcpar
                 out_parameters         =  pripar
            EXCEPTIONS
                 archive_info_not_found = 1
                 invalid_print_params   = 2
                 invalid_archive_params = 3
                 OTHERS                 = 4
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
        SUBMIT zhterot1 TO SAP-SPOOL
                             WITHOUT SPOOL DYNPRO
                             SPOOL PARAMETERS pripar
                             ARCHIVE PARAMETERS arcpar
    *                   SPOOL PARAMETERS %_print
    *                   ARCHIVE PARAMETERS %_archive
                       WITH pchplvar        =   pchplvar
                       WITH pchotype        =   pchotype
                       WITH pchobjid        IN  pchobji3
                       WITH pchseark        =   pchseark
                       WITH pchobeg         =   pchobeg
    *                    with PCHZTR_D        =   PCHZTR_D
    *                    with PCHZTR_M        =   PCHZTR_M
    *                    with PCHZTR_Y        =   PCHZTR_Y
    *                    with PCHZTR_A        =   PCHZTR_A
    *                    with PCHZTR_P        =   PCHZTR_P
    *                    with PCHZTR_F        =   PCHZTR_F
                       WITH pchbegda        =   pchbegda
                       WITH pchendda        =   pchendda
                       WITH pchwegid        =   pchwegid
                       WITH kurs            =   kurs
                       WITH kurst           =   kurst
                       WITH kugrp           =   kugrp
                       WITH pchobji2        IN  pchobji2
                       WITH expand          =   expand
                       WITH  s_shwfld       IN  s_shwfld
                       AND RETURN
      ELSE.
        SUBMIT zhterot1  WITH pchplvar        =   pchplvar
                          WITH pchotype        =   pchotype
                          WITH pchobjid        IN  pchobji3
                          WITH pchseark        =   pchseark
                          WITH pchobeg         =   pchobeg
    *                    with PCHZTR_D        =   PCHZTR_D
    *                    with PCHZTR_M        =   PCHZTR_M
    *                    with PCHZTR_Y        =   PCHZTR_Y
    *                    with PCHZTR_A        =   PCHZTR_A
    *                    with PCHZTR_P        =   PCHZTR_P
    *                    with PCHZTR_F        =   PCHZTR_F
                          WITH pchbegda        =   pchbegda
                          WITH pchendda        =   pchendda
                          WITH pchwegid        =   pchwegid
                          WITH kurs            =   kurs
                          WITH kurst           =   kurst
                          WITH kugrp           =   kugrp
                          WITH pchobji2        IN  pchobji2
                          WITH expand          =   expand
                          WITH  s_shwfld       IN  s_shwfld
                          AND RETURN
      ENDIF.
    In the above code the Pirnt is having the Default '02'
    Now when we place 0 comparision it is going to validate by converting into binary mode ...
    So what is expecting is to
    when the condition will come true?
    what is the use of submit program name calling those spool ?
    Could any one having any idea pls revert back asap!
    Regards
    Sas

    Hi Friend,
    The operator O is a byte logical opertaor, it checks after converting into bit.
    In your case if SY-SUBTY field contains value 0 or 2 will be true.
    After that it is taking the current client's printer setting and other parameters, which is used to pass in submit program.The submit program having some output which is generating the spool.
    Hope it will help you.
    Regards
    Krishnendu

  • Friends Could any one give Que on PD

    Hi
    Experts
    Could any one give the interview questions on PD.
    Thanks in advance

    Hi,
    PD is also very vast ..
    You have to be prepare on Qualificarion Catalogs, Qualifications snd qualification groups . Career Planning and Sucession Planning . Individual Development. Integration of  PD with TEM. Performance management as well can be asked in PD . Qualification Deficits. Profile Matchup
    Best Of Luck
    Regards,
    Kapil

  • Hi gurus, can any one explain me about Badi & Bapi with eg.?

    Hi gurus,
    Can any one explain me about Badi & Bapi with examples.
    Regards
    Raghu

    Hi Raghu
    1) Badis means:
    The BAdIs of the enhancement concept are not treated as standalone objects, but are integrated in the overall concept. Thus, the tools for defining BAdIs are part of the Enhancement Builder included in the ABAP Workbench.
    Transaction SE18, up to now the only entry point for defining classic BAdIs, now manages classic and new BAdIs. When an existing BAdI is displayed or changed, it analyzes whether the BAdI is a classic or a new one, and then switches to the respective tool. In the case of a new BAdI, this tool is the enhancement spot editor
    2) Bapis means:
    BAPIs can be called within the R/3 System from external application systems and other programs. BAPIs are the communication standard for business applications. BAPI interface technology forms the basis for the following developments:
    Connecting:
    New R/3 components, for example, Advanced Planner and Optimizer (APO) and Business Information Warehouse (BW).
    Non-SAP software
    Legacy systems
    Isolating components within the R/3 System in the context of Business Framework
    Distributed R/3 scenarios with asynchronous connections using Application Link Enabling (ALE)
    Connecting R/3 Systems to the Internet using Internet Application Components (IACs)
    PC programs as frontends to the R/3 System, for example, Visual Basic (Microsoft) or Visual Age for Java (IBM).
    Workflow applications that extend beyond system boundaries
    Customers' and partners' own developments
    Thanks
    Trinath

  • Could any one give me direction towards creating asset with REST/javascript

    could any one give me direction towards creating asset with REST/javascript?

    There is a sample bundled with webcenter sites at Misc/articles. You have to implement the proxy controller which serve as proxy for xmlhttp request.
    The proxy will redirect the request actual REST resource in the target server

  • Could any one provide me with the links of file to file scenario using BPM

    Could any one provide me with the links of file to file scenario using BPM

    Hi,
    omit RFC part
    /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Can any one explain me the relation between BDC and reports events?

    hi experts.....
    can any one explain me the relation between BDC and reports events? we are using report events in BDC programmes why?\
    Is reports events occurs in each and every concept in ABAP i.e creating custom idocs, smart forms, sap scripts, dialog programmes, module pool technics?
    thanks in advance

    The forums are expert forums. So the first thing I would do is change your name.
    It's like entering a grand prix in a car with a "Student Driver" sign.
    Rob

  • Can any one explain me about Field symbols in Genral Reports?

    Can any one explain me about Field symbols in Genral Reports?
    If possible, plz explain me with the code to explain me about the field symbols.
    Regards,
    Krishna Chaitanya

    Syntax
    FIELD-SYMBOLS <fs> { typing | STRUCTURE struc DEFAULT dobj }.
    Extras:
    1. ... typing
    2. ... STRUCTURE struc DEFAULT dobj
    Effect
    The FIELD-SYMBOLS statement declares a field symbol <fs>. The naming conventions apply to the name fs. The angle brackets of the field symbols indicate the difference to data objects and are obligatory. You can declare field symbols in any procedure and in the global declaration section of an ABAP program, but not in the declaration section of a class or an interface. You can use a field symbol in any operand position in which it is visible and which match the typing defined using typing.
    After its declaration, a field symbol is initial - that is, it does not reference a memory area. You have to assign a memory area to it (normally using the ASSIGN statement) before you can use it as an operand. Otherwise an exception will be triggered.
    Addition 1
    ... typing
    Effect
    You can use the addition typing to type the field symbol. The syntax of typing is described under Syntax of Typing. The typing specifies which memory areas can be assigned to the field symbol (see Checking the Typing) and in which operand positions it can be used.
    Note
    You can omit the addition typing outside of methods. In this case, the field symbol has the complete generic type any and is implicitly assigned the predefined constant space during the declaration.
    Addition 2
    ... STRUCTURE struc DEFAULT dobj
    Effect
    If you specify the addition STRUCTURE instead of typing for a field symbol, and struc is a local program structure (a data object, not a data type) or a flat structure from the ABAP Dictionary, this structure is cast for the field symbol <fs>. You have to specify a data object dobj that is initially assigned to the field symbol.
    The field symbol copies the technical attributes of structure struc as if it were completely typed. When you assign a data object using the addition DEFAULT, or later using ASSIGN, its complete data type is not checked in non- Unicode programs. Instead, the system merely checks whether it has at least the length of the structure and its alignment.
    In Unicode programs, we differentiate between structured and elementary data objects. For a structured data object dobj, its Unicode fragment view has to match the one of struc. In the case of an elementary data object, the object must be character-type and flat, and struc must be purely character-type. The same applies to assignments of data objects to field symbols typed using STRUCTURE when using the ASSIGN statement.
    Note
    Field symbols declared using the addition STRUCTURE are a mixture of typed field symbols and a utility for casting structured data types. You should use the additions TYPE or LIKE for the FIELD-SYMBOLS statement to type field symbols, while the addition CASTING of the ASSIGN statement is used for casting.
    Example
    The first example shows the obsolete usage of the addition STRUCTURE.
    DATA wa1 TYPE c LENGTH 512.
    FIELD-SYMBOLS <scarr1> STRUCTURE scarr DEFAULT wa1.
    <scarr1>-carrid = '...'.
    The second example shows the replacement of STRUCTURE with the additions TYPE and CASTING.
    DATA wa2 TYPE c LENGTH 512.
    FIELD-SYMBOLS <scarr2> TYPE scarr.
    ASSIGN wa2 TO <scarr2> CASTING.
    <scarr2>-carrid = '...'.
    Also,
    Field Symbols
    Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
    Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
    Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
    All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
    You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
    Field symbols provide greater flexibility when you address data objects:
    If you want to process sections of fields, you can specify the offset and length of the field dynamically.
    You can assign one field symbol to another, which allows you to address parts of fields.
    Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
    You can also force a field symbol to take different technical attributes from those of the field assigned to it.
    The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
    While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
    For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
    check the below links u will get the answers for your questions
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
    http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
    Syntax Diagram
    FIELD-SYMBOLS
    Basic form
    FIELD-SYMBOLS <fs>.
    Extras:
    1. ... TYPE type
    2. ... TYPE REF TO cif
    3. ... TYPE REF TO DATA
    4. ... TYPE LINE OF type
    5. ... LIKE s
    6. ... LIKE LINE OF s
    7. ... TYPE tabkind
    8. ... STRUCTURE s DEFAULT wa
    The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
    Effect
    This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
    You can only use one of the additions.
    Example
    Output aircraft type from the table SFLIGHT using a field symbol:
    FIELD-SYMBOLS <PT> TYPE ANY.
    DATA SFLIGHT_WA TYPE SFLIGHT.
    ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
    WRITE <PT>.
    Addition 1
    ... TYPE type
    Addition 2
    ... TYPE REF TO cif
    Addition 3
    ... TYPE REF TO DATA
    Addition 4
    ... TYPE LINE OF type
    Addition 5
    ... LIKE s
    Addition 6
    ... LIKE LINE OF s
    Addition 7
    ... TYPE tabkind
    Effect
    You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
    This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
    In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
    Effect
    Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
    The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
    Example
    Address components of the flight bookings table SBOOK using a field symbol:
    DATA SBOOK_WA LIKE SBOOK.
    FIELD-SYMBOLS <SB> STRUCTURE SBOOK
    DEFAULT SBOOK_WA.
    WRITE: <SB>-BOOKID, <SB>-FLDATE.
    Related
    ASSIGN, DATA
    Additional help
    Declaring Field Symbols

  • Can any one explain me about bursting in bi publisher

    hi all
    can any one explain me about bursting in bi publisher
    i need with small example with screen shots
    Thanks
    Sreedhar

    Hi,
    http://blogs.oracle.com/BIDeveloper/2009/03/bursting_1.html
    look into this http://www.strsoftware.com/blogs/oracle/2009/12/how-to-burst-and-deliver-documents-from-bi-publisher-enterprise/
    Thanks,
    Srikanth

  • Can any one explain me about Listeners in Java

    Hi,
    Can any one explain the Listeners concept in Java??
    Will that work like net send in Windows NT??
    How can we achieve the net send type of messaging in an Intenet application??
    Is there any possibility??
    Please help me out...
    Thanks in advance,
    Chaitanya.

    The idea is that the "observable" object holds a list of listening classes which conform to a given interface. When an event occurs it walks the list calling a specific method in all the listeners with whatever parameters are suitable to speficy the event. Very often the listeneing objects are inner classes of some larger class which implement whatever effect the event is to have on the larger class.
    Anyonymous inner classes are a convenient abbreviation here.
    Usually the observable class has methods called add???Listener and
    remove???Listener to add and remove listeners from it's list. There's also often a protected method called fire???Listeners (where ??? is the event type).
    So for instance:
    public interface DirtyListener {
       public void dirtyChanged(boolean to);
    class DataModule {
       private Set dirtListeners = new HashSet(10);
       public void addDirtyListener(DirtyListener d) {
          dirtListeners.add(d);
       public void remiverDirtyListeners(DirtyListener d) {
          dirtListeners.remove(d);
       public void fireDirtyListeners(boolean to) {
          Iterater it;
          for(it = dirtyListeners.iterator(); it.hasNext();)
             ((DirtyListener)it->next()).dirtyChanged(to);
    class ObservingClass {
        DateModule data = new DataModule();
        data.addDirtyListener(new DirtyListener() {
          public void dirtyChanged(boolean to) {
            saveButton.setEnabled(to);

  • Could any one tell me what is the difference between swfloader and module loader?

    Hi  All,
                          Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?

    Hi,
    ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
    What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client.  In other words, the class factory is a singleton for a given url. Unloading is a totally different story.  As you note, not everything is truly unloadable, because there may be lots of references to stuff in
    the module that will keep it alive and un-GC'ed.
    I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
    The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system.  I will assume that you are, because otherwise it would be obvious where to expose methods.  You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.                
                    Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
    Also try and refer to this link which was previously discussed in this forum..
    http://forums.adobe.com/message/74404
    Thanks,
    Bhasker

  • Hi could any one tell me if the proxy configuration is a must for file to

    hi could any one tell me if the proxy configuration is a must for file to  mail scenario

    Not needed at all.
    Proxy are used when integrating with a SAP system and in the case of a file to mail scenario all you need is a sendr file adapter and receivr mail adapter and a mail server in the same netwrok as you XI server.
    Regards
    Bhavesh

  • Could any one tell me how to do the left outer join or right outer join?

    Could any one  tell me how to do the left outer join or right outer join in Webi Rich Client? thanks.

    we can do it in two ways
    1.  In  web intelligence level  on the query panel click the sql query and write the statement what ever u want there by modifying the existing statement.
    2.  In universe level select the fields in the two tables that you want to make join and create the join between two tables directly by joining field in table 1 to the field in the table 2 by drawing a line and double click on the line to view the join properties,then on join properties if we check the table 1 outer then it is left outer join if we check on table 2 outer then it will be the right outer join.after exporting the universe to the central sever we are now ready to use in web intelligence with out being changed anything in the sql query.
    endorse me if it is useful.
    thanks & regards
    Sreekanth.

  • Can any one explain the concept of  Hash ( # ),

    Hi All,
    I am generating the report on Billing Cube.. for that cube I have DS 2lis_13_vdhdr, 2lis_13_vditm,
    I am executing the report with characteristics Material , Billing Number and Key Figures Billing Value.
    For Example : I am seeing the report By Material , in last line it is showing Hash ( # ),
    When I am drill down by material by Billing no  with Billing value.
    Now it is showing the billing value agents’ the Billing Number and in the same time it is showing hash for the same Billing Number….
    Eg:       Material     Billing No     Billing Value
         120          199001     400 USD
         122          199002     500 USD
         125          199003     300 USD
         #          199001     000.00
                   199002     000.00
                   199003     000.00
    Can any one explain the concept of  Hash ( # ), and why the Billing No is reputing in Hash..
    I have same problem in other Cubes with other Characteristics …
    <b>How can I permanently Restrict Hash..  my user don’t want to see in report..</b>
    Regards,
    Shaik

    Shaik,
    since the thread in the Business Explorer forum has been marked as answered , I assume that this thread can also be closed as answered ... please assign points and close as answered..
    Arun
    other post
    How can I permanently Restrict Hash..in Query level  ( # )

  • I just did update of software and i lost all of my picture and songs from itune which is un usual .could any one tell me how could i get iphoto working again?

    i just did update of software and i lost all of my picture and songs from itune which is un usual .could any one tell me how could i get iphoto working again?

    What did you update with what?  Are we talking a computer?  A device like an iPhone?  You updated iTunes?  You updated the operating system?
    If you updated the iOS on a device, I believe it warns you it will erase the device and you should make a backup first.  Restore from the backup.
    iPhoto is an application pretty much separate from iTunes.  There is an iPhoto forum if you are having problems with that application.

Maybe you are looking for