Hi Experts/Friends wrong executable digital signature for Add-on
i create add on when i start addon from addon manager error
msg raise "wrong executable digital signature for Add-on"
Awaiting soon Reply
raj
Hi Raj,
in Which method you created ARD..through B1DE or AddonRegdatagen..
1) it may show error due to wrong .exe file selection while creating the .ard file.
2)Delete your older versions completely and try again..it will happen due to mismatch of versions also..
Delete the folder SM_OBS_DLL(close sap and do) in your %temp% directory
and try again..
3)check you are using right version of B1DE ....
Regards,
Ganesh K
Similar Messages
-
Add on XL reporter : Wrong executable digital signature for Add on
Hi Experts,
I have a client who gets this error 'Add on XL reporter : Wrong executable digital signature for Add on' when they try to login. They are on 2007A PL45. This happens on the server as well as on clients. Uninstalll and reinstall of client didn't work. We had a look at the AddonLocalRegistration folder to see if XL reporter is registered but can't see any.
I have found a similar link in the forum but that says about 2005b.
Any help will be appreciated.
regards
JohnsonSir,
Please do the following steps :
1. Please go to the SBO-COMMON database, find table SARI, you will get
the data entry for your Addon. Please check the value of field
"AddOnChk". This is the digital signature of Addon executable file.
2. Then go to installer package of the Addon, open the ard file
(XLReporter.ard) with notepad then check the value of "addonsig".
3. Compare these two values, if they are different, please overwrite
"AddOnChk" field in database with the value of "addonsig" in ard file.
and then try to start the addon again.
4. If there are the same, the ard file or the executable file has been
corrupted. I would like to suggest you remove the installer package
from your machine, and download a fresh installer of Addon from SAP
Service Marketplace. After that, please follow the steps as per the
attached note ( Note no. 819501 ) to make your machine clean and
then install the addon again.
Regards,
AVTAR SINGH -
Add-on blank agrement wrong executable digital signature for add-on
hai,
when we trying to install the sample add-on called balnked agrement in sdk
help file we are getting the follwing error.
add-on blank agrement wrong executable digital signature for add-on.
how do recftify this error.
thanking
nagababuNagababu,
I have seen this error when either the .ard file is corrupt or the license file is corrupt. You may want to try getting a new license key from SAP and/or create a new .ard file.
Eddy -
Hi all, Wrong Executable Digital Signature for Add-on
hi all,
i m getting error when installing my addon.
"Wrong Executable Digital Signature for Add-on "
i remove path from "AddOnsLocalRegistration". and also remove folder from path
"C:\Program Files (x86)\SAP\SAP Business One\AddOns" and also clean %temp% folder
but i still getting same problem.
Regards
Rajkumar GHi,
Did u try recreating the add on, may be there was some problem when creating the ARD. If that also dosent work then try the following.. In the following path C:\Program Files\SAP\SAP Business One u will find the file AddOnsInstall.sbo now open this file with notepad and then remove the entries for ur add on.
Hope it helps,
Vasu Natari. -
Wrong Executable Digital Signature for Add-on
Hi All
I have created Addon Installer with the B1DE Installer Setup. After that also use batch file AddOnRegDataGen.bat to Generate Ard File.
After I addon install successfully, BUT when I want to Start it , It Prompts message
"Wrong Executable Digital Signature for Add-on."
i am using SAP b1 2007 and BIDE 1.5.
I have already read all the answers of the SDN and but i my problem didnt solve
I am losing the hopes. Please Help!
Thanks
RupinderHi Rupinder ,
Pls don't loose hope.
This is the problem of exe, Actaullt while creating ADDon two files are created,
one is ard and other is exe,
take care about the version of Addon .,Generate all the keys again and see whether the old version of addon is ther or not if there pls remove that carefully .and create the addon again .
Rgds,
Anshu
Edited by: anshu srivastava on Feb 17, 2009 12:12 PM -
Error:Wrong Executable Digital Signature for Add on.
Hi,
We we are starting ALL Add on's we are Getting Error; Wrong Executable Digital Signature for Add on . Before Also we got Same Error After that We Uninstall All Add -ons and Freshly we Installed from Partner Portal and Installed. after That Alll Add os it's working OK there is no Error yesterday.but today i login my server it's shwoing Same Error; Wrong Executable Digital Signature for Add on.
I Checked Digital Signature AddOnChk in SARI Table Under SBO and adddonsig Under Under .ard file in Installer Package. Both are Same. How we Can Solve this issues Please Advise.
AA_Application runs without Mandatory AddOn
SAP Note:925984
See this Link for Wrong executable digital signature for Add-on[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=0000925984|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=0000925984]
Symptom
After changing a Mandatory AddOn's executable, without updating the ard file, the error message "Wrong executable digital signature for Add-on" is generated. However the application continues to work normally.
Other terms
AddOn, SAP Business One, Mandatory, continues, ard, Wrong executable digital signature for Add-on
Reason and Prerequisites
Bug
Solution
This issue will be fixed in a 2005A SP1 patch, please refer to the info.txt file on the Service market Place to confirm if the fix was included.
Can any one Guide me on this Note ? How we can solve this issues.
Regds,
Samapth Kuamr Devunuri.
Edited by: sampathdevunuri kumar on Nov 8, 2008 6:15 AM
Edited by: sampathdevunuri kumar on Nov 8, 2008 6:18 AMHi,
The runtime error can be caused by a corrupt installation.
I am attaching 2 notes for you to go through.
How to clean client after corrupt installation of add-on and also Re-registering the UI.
[808354|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=000808354] UI Server is not loaded with SAP Business One client
[819501|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=000819501] How to clean client after corrupt installation of add-on
Please follow the steps in [819501|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=000819501] to make your machine clean and then install the add-ons again.
If you are still experiencing problems please try the following:
- Backup the SBO Common
- Re-run Upgrader Common from patch
Result is a new SBO common with a new SARI.
hope it helps,
Regards,
Ladislav
SAP Business One Forum Team -
Wrong digital signature for add-on installer
I have created a addon and it gives error as,
Wrong digital signature for add-on installer
When I tried installing this addon on another SAP server,it worked.On the problamatic server,the antivirus has expired.Is virus capable to creating this problem ? I have tried all the options for solving the problem such as,
1.Delete the temporary files.
2.Delete the SBO files.
3.Create a new addon and release it.
4.Create a new addon with different name.Hi Dilip,
Refer This...........
Link: [url] Wrong Executable Digital Signature for Add-on
Link: [url] SAP Business One AddOn Installer
Link: [url] Wrong digital signature for add-on installer
Link: [url] Wrong Digital Signature...
Thanks
Shafi
Edited by: shafi_sunshine on Aug 18, 2011 7:21 AM -
XL Reporter Wrong executable digital signature error on one workstation
Hi,
Im getting this error on 1 of our client's worstations.
They have SAPB1 2005A.
XL reporter works on all other workstations except for one.
Any suggestions?
Thanks!Hai!
Check these threads
Re: Wrong digital signature for add-on installer
error : "Wrong Digital Signature for Addon Installer"
Error:Wrong Executable Digital Signature for Add on.
Register Add-on -
Wrong Digital Signature for Add-on - After Install - When Start Add - on
Hi there,
I have created Addon Installer with the B1DE Installer Setup. After that also use batch file AddOnRegDataGen.bat to Generate Ard File.
After I addon install successfully, BUT when I want to Start it , It Prompts message
"Wrong Digital Signature for Add-on."
I do not know more what to make, already I read all the answers of the SDN and I did not solve the problem.
I am losing the hopes. Please Help!
Thanks a lot!Hi
Try editing the AddOnRegDataGen.bat and changing the version number to corellate to the setup executable you have created and then execute the batch file to recreate a new ard file.
Regards
John -
Wrong digital signature for Add-on
I have just upgraded to 2004 (patch 5). My Add-on is installed (finally) and is successfully loading (finally)when SAP B1 is launched. Whenever I re-compile my Add-on for development and replace my Add-on exe I get the error "Wrong digital signature for Add-on" when SAP goes to load the Add-on again.
I cannot successfully create my .ard file without a digital signature for the Add-on .exe (even though the documentation says it is optional).
How can I test my Add-on in development mode if I have to re-create the .ard file and re-install the Add-on everytime I re-compile?? This does not seem correct.
Please advise. Thanks.I found a solution to this problem.
We were not debugging in development mode properly. -
Error : "Wrong Digital Signature for Addon Installer"
I'm having some problems at the time of installing any kind of addon in sap B1
Everytime I'm having an error -
"Wrong Digital Signature for Addon Installer"
even when I'm adding SCREEN PAINTERHi
This error could be cause by a versioning or corrupted installation:
1. For the version please check if you have another add-on installed with the same version like 2.1.2 (try to change it add-on file and try again)
You can also try to change the add-on installation order (in case of you have another add-ons installed).
2. If checking the version does not help please check those notes on How to clean client after corrupt installation of addon and also Re-registering the UI.
808354 UI Server is not loaded with SAP Business One client
819501 How to clean client after corrupt installation of addon
Paulo Calado
SAP Business One Forums Team -
Hi Experts,
We have to implement digital signature for form-16 on only SAP system (not on portal). Can anyone write me steps to configure and impelement it in ECC6.0
I have read SAP Note 1168740 and tried to open the link
Steps to install these credetials is explained at following URL:
http://help.sap.com/saphelp_nw70/helpdata/en/db/ aafb211ead420faeeaa24e99eb5f41/frameset.htm
Further information on digital signature can be found at:
http://help.sap.com/saphelp_nw70/helpdata/EN/46/ 1ca382f3ec5873e10000000a11466f/frameset.htm
and also tried to get information on "Adobe Document Services Configuration Guide".
However, i am unable to get the details. Pls help me to resolve this.
Thanks & Regards,
Shree NP.
Edited by: SAP.HR.NP on Jan 4, 2012 11:20 AMHi Shree,
As mentioned in your post, the configuration given in the document is Basis related. However, the entire configuration for Digital Signature for Form 16 is available in Note 1168740. Are you facing some problem in opening the links mentioned in the Note?
You can try to visit the below links:
a) Uploading a digital signature in the system:
You obtain your credentials and the corresponding public keys (as part of a certificate) for certifying and signing from a
certification authority. Steps to install these credetials is explained at following URL:
http://help.sap.com/saphelp_nw70/helpdata/en/db/aafb211ead420faeeaa24e99eb5f41/frameset.htm
Further information on digital signature can be found at:
http://help.sap.com/saphelp_nw70/helpdata/EN/46/1ca382f3ec5873e10000000a11466f/frameset.htm
Also, go through the Note 1589254 (Form 16 central note for ADS configuration). In order to include digital signature to Form 16's PDF, some additional ADS configuration is required. This note provide check point of ADS configuration for Form16. Once done check the form 16 and let me know if you are getting some error on executing Form 16 with digital signature? Or are the signature not working at all?
Regards,
Nishtha -
How to get digital signature for Google Map geocoding V3 in PL/SQL?
Hi, Gurus:
Could anyone provide me an example about how to generate digital signature for Google Maps service v3 in PL/SQL? We tried to upgrade our program using Google maps service from v2 to v3. We are using PL/SQl on background to send request to Google for geocoding. We found some sample code to register with digital signature, but none of them is based on PL/SQl. Notice I used Google business client ID "gme-XXX" and wallet.
https://developers.google.com/maps/documentation/business/webservices/auth#digital_signatures
Google Maps API - more URL signing samples
Here is my code for V2. I notice in order to get signature, I need to use HMAC-SHA1 algorithm.
procedure Get_Geocoding(P_s_Address in varchar2, P_s_Geocoding out varchar2, P_n_accuracy out number, P_b_success out boolean) is
l_address varchar2(4000);
l_url varchar2(32000);
l_response varchar2(3200);
n_first_comma number;
n_second_comma number;
n_level_length number;
BEGIN
/* TODO implementation required */
l_address:=APEX_UTIL.URL_ENCODE(P_s_Address);
l_address := replace(l_address,' ','+');
l_url := 'http://maps.google.com/maps/geo?q='||l_address||'&'||'output=csv'||'&'||'client=gme-XXX';
l_response := utl_http.request(l_url, APEX_APPLICATION.G_PROXY_SERVER, '/u02/app/oracle/admin/apexsb/wallet', 'XXXXXXXX');
n_level_length:=0;
n_first_comma:=instr(l_response,',',1,1);
n_second_comma:=instr(l_response,',',1,2);
n_level_length:=n_second_comma-n_first_comma-1;
P_n_accuracy:=0;
if n_level_length>0 then
P_n_accuracy:=to_number(substr(l_response,n_first_comma+1, n_level_length));
end if;
l_response:=substr(l_response,instr(l_response,',',1,2)+1);
--dbms_output.put_line('In function: l_response ='||l_response);
P_s_Geocoding:=l_response;
if (P_s_Geocoding<>'0,0') then
P_b_success:=true;
--dbms_output.put_line('true');
else
P_b_success:=false;
--dbms_output.put_line('false');
end if;
END;
Thanks!Hi, guys:
I tried to generate digital signature for Google map service
Maps for Business: Generating Valid Signatures - YouTube
Generating an HMAC-SHA-1 Signature Using Only PL/SQL
OAuth and the PL/SQL | Data Warehouse in the Cloud
but I got error message from Google:
Unable to authenticate the request. Provided 'signature' is not valid for the provided client ID. Learn more: https://developers.google.com/maps/documentation/business/webservices/auth
I think there is something wrong with my code to generate signature, as if I remove the part regarding client and signature, it will work, can anyone help me on this problem?
/*Procedure Get_Geocoding is used to get geocoding with accuracy level for V3 business account, you can find Google map digital signature descrirption from
https://developers.google.com/maps/documentation/business/webservices/auth#digital_signatures
if geocoding is 0,0, procedure returns false to indicate failure of get geocoding*/
procedure Get_Geocoding2(P_s_Address in varchar2, P_s_Geocoding out varchar2, P_n_accuracy out number, P_b_success out boolean) is
--private key for Google business account, this is provided by Google with client name.
l_private_key_src varchar2(200):='xxxxxxxxxxxxxxxxxxx';
l_private_key_b64_alter varchar2(200):= translate(l_private_key_src,'-_','+/');
l_private_key_bin raw(2000);
l_client_name varchar2(100):='gme-xxx';
l_signature_mac raw(2000);
l_signature_b64 varchar2(200);
l_signature_b64_alter_back varchar2(200);
l_Google_service_domain varchar2(200):='http://maps.googleapis.com';
l_address varchar2(4000);
l_url varchar2(32000);
l_path varchar2(32000);
l_response varchar2(32000);
l_page UTL_HTTP.HTML_PIECES;
n_actual_length number;
json_obj json;
json_tempobj json;
jl_listOfValues json_list;
json_geom_obj json;
json_loc json;
l_lat VARCHAR2(40);
l_lng VARCHAR2(40);
l_status VARCHAR2(255);
json_accuracy json;
--temp_string varchar2(10000);
n_first_comma number;
n_second_comma number;
n_level_length number;
BEGIN
/* TODO implementation required */
l_private_key_bin := utl_encode.base64_decode(UTL_I18N.string_to_raw(l_private_key_b64_alter, 'AL32UTF8'));
l_address:=APEX_UTIL.URL_ENCODE(P_s_Address);
--dbms_output.put_line(l_address);
l_address := replace(l_address,' ','+');
l_path := '/maps/api/geocode/json?address='||l_address||'&'||'sensor=true';
dbms_output.put_line(l_path);
l_signature_mac :=DBMS_CRYPTO.mac(UTL_I18N.string_to_raw(l_path, 'AL32UTF8'), DBMS_CRYPTO.hmac_sh1,l_private_key_bin);
l_signature_b64:= UTL_RAW.cast_to_varchar2(UTL_ENCODE.base64_encode(l_signature_mac));
l_signature_b64_alter_back:=translate(l_signature_b64,'+/','-_');
dbms_output.put_line(l_signature_b64_alter_back);
--get response from Google map service
l_url:=l_Google_service_domain||l_path||'&client='||l_client_name||'&signature='||l_signature_b64_alter_back;
--l_url:=l_Google_service_domain||l_path;
dbms_output.put_line(l_url);
l_page:=utl_http.request_pieces( l_url, 99999);
for i in 1..l_page.count loop
l_response:=l_response||l_page(i);
end loop;
n_actual_length:=length(l_response);
dbms_output.put_line(n_actual_length);
dbms_output.put_line(l_response);
--parse JSON result
json_obj:=new json(l_response);
l_status := json_ext.get_string(json_obj, 'status');
IF l_status = 'OK' then
jl_listOfValues := json_list(json_obj.get('results'));
json_tempobj := json(jl_listOfValues.get(1));
json_geom_obj := json(json_tempobj.get(3));
json_loc := json_ext.get_json(json_geom_obj, 'location');
l_lat := to_char(json_ext.get_number(json_loc, 'lat'));
l_lng := to_char(json_ext.get_number(json_loc, 'lng'));
P_s_Geocoding:=l_lat||','||l_lng;
dbms_output.put_line('##########'||P_s_Geocoding);
case json_ext.get_string(json_geom_obj, 'location_type')
when 'ROOFTOP' then P_n_accuracy:=9;
when 'RANGE_INTERPOLATED' then P_n_accuracy:=7;
when 'GEOMETRIC_CENTER' then P_n_accuracy:=5;
else P_n_accuracy:=3;
end case;
P_b_success:=true;
else
P_b_success:=false;
P_n_accuracy:=0;
P_s_Geocoding:='0,0';
end if;
END; -
Digital Signature for QM notification status change
Hello experts,
I need your guidance regarding implementation of user digital signature for QM notification status change. Our customer has ECC 6.0 but they are not inclined to introduce enhancement package 3 soon. Now their requirement is that while QM notification status change they want to have a user signature pop-up to verify the user authorization to do so. But they don't want to do so by using digital signature via DMS status change.
I am really not sure if I have explained the situaion correctly or not as i am quite new to QM. But I am desparately looking forward to get your valued replies in this regard.
Best regards,
AnirbanTo fulfill the FDA requirement we have apply the logic to make sure that a digital signature is captured for status changes during task processing.
To map this requirement we have developed one custom table to store remark that will be displayed on digital signature remarks textbox. This table will have following feild:
STAT - System/ user status
QMART - QN type
SPARS - language
TEXT - character text.
Work with ABAPer to implement this, and after implementing validate following key point:
u2022 Validate that after successful digital signature that the signature cannot be overwritten.
u2022 Validate the locking of the User ID after customer specific number of unsuccessful signature attempts.
u2022 Verify that the digital signature works for each status.
u2022 Validate that if the digital signature is cancelled prior to successful entry that the system status reverts back to previous status and all processing authorizations allowed for that status still function properly.
Hope my reply will help you.
Thanks!!! -
Hi experts
i want to operate digital signature for bid
i activate digital signature for bid
we want to try to use system signature with auto by sap user id/passward
what should i do to make it work ??
almogHello,
Kindly follow the steps provided in the Strategic Sourcing config guide maintained at the belwo mentioned location.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.01 -> Configuration Guides for SAP SRM 7.01 --> SAP SRM 7.0 EHP1: Strategic Sourcing
Best Regards,
Rahul
Maybe you are looking for
-
The Mac App Store shows an update available for iMovie but when I click "update" it gives me this message, "The product distribution file could not be verified. It may be damaged or was not signed." What can I do to update this program?
-
How to pay a foreign vendor on a French Bank Account
Hi Team We have a issue where we need to clear a Forien Vendor. So we used a payment menthod say "T" where is marked Foriegn payments allowed.But F110 did not work as the Bank Account was Local . Company belongs to France Vendor belongs to Swiss Vend
-
Supplier Conversion - Sites data - Country code
Hi, While doing Supplier conversion from release 11.5.10 to R12.1.3, we see the below value in REJECT_LOOKUP_CODE column of the AP.AP_SUPPLIER_INT_REJECTIONS table: 'AP_NULL_COUNTRY_NAME' As I understand this looks like the program is looking for a C
-
Acrobat Pro 11.0.10 cannot print
When I want to print a pdf in Acrobat Pro 11.0.10 I got the warning (in dutch) "The document cannot be printed" and then "There are no pages selected for printing". You understand that I have my printer selected (Acrobat sees the printer) and have se
-
Import remarks with multiple lines
Hi, How can I import using DTW for Item remarks with multiple lines?