HI experts please explain abap client proxy

1) please explain abap client proxy step by step.how it is working

Hi
-->ABAP proxy are the proxy which we create in R/3 system
-->If we create the proxy on Outbound Message interface in R/3 system then it is ABAP Client proxy.
-->If we create the proxy on Inbound Message interface in R/3 system then it is ABAP Server proxy.
Thanks

Similar Messages

ABAP Client Proxy to SOAP

Hi all,
I am working on ABAP client proxy to SOAP Asynchronous scenario. when iam sending the data from r/3 system data sent to webservice.
but PI sending this same data 3 more to the third parth system. when i checked in runtime workbench it is showing number of retrys 3
how to resolve this issue. please explain in detail
Thanks
Anil

Anil,
That's the default setting for Async SOAP communication...this can occur if the receiver is overloaded and cannot take any more feed and sometimes time out in the middle of the hand off...this would lead to re-try in PI...so you would see 3 entries of same data...refresh or clear the data from the receiver could solve the issue...
Thanks,
Srini
Edited by: Srinivas Davuluri on Sep 9, 2010 1:51 PM

Problem in ABAP Client Proxy

Hai All,
I am working on ABAP Client Proxy to RFC.
Here i generated the proxies and wen i execute it i am able to see in sxmb_moni but its showing in Green color which is still in process.but i was unable to find the the receiver business system and receiver interface.
I hope some HTTP connection problem.
Can anyone explain me in detail how to create the http connection as i confused here.
Lets say XI(sender) to R3(Receievr)
where proxy is been created in XI system itself and also generated in XI system only.
Can anyone suggets me here as this interface is totally asynchronous.
Thanks,
Kalyan.

Hai Seshagiri,
Thanks a lot.
Am giving you points buddy.Its working.
Cud u plz give me ur Email id.
This is fine but i want implement this interface to further there i am getting errors.So that i can send u the screenshots of those.
Thanks,
Kalyan.
Please read the Forum's Rules of Engagement,
i.e.,
[/thread/117188 [original link is broken];
and refrain from using email correspondence as the main objective of the Forums is to share knowledge.
SDN PI/XI Forum Moderator

ABAP client proxy With Receiver JDBC Adapter

Hello Experts,
I am working on a scenerio ABAP client proxy With Receiver JDBC Adapter.
The client proxy program will fetch the master data related to equipment in plant maintenance module and will update the sql database through Receiver JDBC Adapter .
my requirement is if the equipement is created in sap then the scheduled job has to trigger the client proxy program and send the message with status 'created' to sql data base.
if the equipment is modified in sap then the scheduled job has to trigger the client proxy program and send the message with status 'modify' to sql data base.
please let me know how can i write the logic/code for this scenerio in client proxy program.
Tables for equipment master i am using is EQUI and fields are ERDAT and AEDAT which is created date and modified date.
fields for scheduling start date is tbtcp-sdldate.
Thanks in advance.
Ram.

Hello Ram,
Here you can check if updated date field is not empty then send status as created and if this field is not blank then send status as modified record.
Monica

Abap client proxy to xi - no data found

Hi experts
I m working on abap client proxy to file scenario where in I m sending data from R/3 system to legacy system via xi , but after doing all the configurations and running the abap program for triggering client proxy , i dont find any data on the receiver side ,
I have activated client proxy as per Vijay Kumaris Blog
I checked sxmb_moni on the R/3 system but shows no data selected , so no question of data being found on xi server ,
i m really sutcked up ....dont know hwat to do , pl help
rgds
mojib

Hi,
Have u used commit work at the end of the code.
Can you please tell me what all configuration u have done.
U have referred the ABAP Proxy configuration:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
Refer the below log for Client Proxy -
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Chirag

Facing problem with SOAMANAGER while working on ABAP Client Proxy

Dear Community Friends & Experts,
I am facing a problem with the SOAMANAGER, I think so. Let me explain you a scenario what I am into:
The scenario is like I need to Push data from BI table to SAP PI. We decided to go using ABAP client proxy as Sender and then will
receive it using FTP adapter to FTP address.
I have created Integration repository design object Data types, Message types, interfaces and mapping. Now I am into SAP BI and running SPROXY and generated proxy for my outbound interface. fine.
Till now its okay.Now I wanna my generated proxy to be available within the SOAMANAGER T-code I am not able to find my proxy in the list.
Can anybody send me detailed steps for outbound proxy to SOAMANAGER for creating local port for proxy. I wanna use proxy with WS adapter.
Second Query:
I need to using RSPC in SAP BI to trigger the proxy what code to write with SAP PI 7.0 version.
Can anybody bring some light to this problem...
<h5>Regards,
Gaurav Patwari </h5>

Dear Experts,
Problem solved, cannot say solved but yes its not required now as I am having Client Proxy call so it will be a native call to XI and which does not need SOAMANAGER things.
Thank you all for taking your time and writing answers.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]
Edited by: GauravPa on Apr 17, 2010 11:32 AM

ABAP Client proxy message not reaching AAE

Hi Experts,
I am facing a strange issue in one of my proxy interfaces. ABAP client Proxy is used to post message to AAE in SAP PI 7.3. The messages are being generated and pushed out of ECC successfully. I can see them in the SXMB_MONI t-code with checkered flag. These messages are reaching the Integartion Engine instaed of the Adapter Engine.
I have configured the following:
1. Sender / Receiver ID in SXMSIF:
2. Configured the corresponding Runtime parameter in SXMB_ADM
I have few other such ABAp client proxy i/f's which work fine and their message are being sent to the Adapter engine. Howveere, only this one interface is posing a problem. What can be the issue?
Please advice.
Thanks in advance.
Elizabeth.

Hi Elizabeth,
It will be great if you could please let me know all the user profile configured in userID of Logon&Security tab of SM59 for connecting ECC system to post the message via AAE.
I have used
SAP_XI_APPL_SERV_USER
SAP_XI_DEVELOPER_J2EE and
SAP_XI_IS_SERV_USER
profiles in my UserID for Basic authentication.
Currently I am doing the same scenario what you have done with integrated configuration.The message is getting failed in ECC with 403 Forbidden error.
Please help me.
Thanks
Ray...

Exception when creating ABAP client proxy using WSDL

Hi Experts,
I tried to create a client proxy on the CRM system for a web service URL (where the WSDL exists), in the transaction SE80.
When I tried creating this, i got exception as follows.
Exception occured in communication framework:error in HTTP framework:404 conn failed http://inld50054696a:8080/clearspace/rpc/rest?forumservice?wsdl
Please let me know, how to tackle this problem.
What are all the settings that needs to be done in this regard.
Regards
Lakshman

Hi Vasanth,
There are many threads and blogs on this topic.
Choose the search Forum on the Forum page and select "All categories" in the Category field and enter your topic "ABAP client proxy from WSDL" in the search field.
Rgds,
Sam Raju

ABAP client proxy to File scenario

Hi,
I am doing ABAP client proxy to File scenario.
I have followed Ravikumar allampallam blog i.e https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1387. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
My abap proxy has successfully created 4 objects:
1)ABAP Class ( ZCO_ MIOA_ABAP_PROXY).
2. Structure for the message type in ABAP Data Dictionary (ZMT_PROXY).
3. Structure for the data type in ABAP Data Dictionary (ZDT_PROXY_SRC).
4) Table type (ZSTRING_TAB).
can u tell me how can i fetch data from database table into structure?

Hi,
see first create the data type,msg type, msg interface and go to R3 instance of Xi and use SPROXY transaction , locate your SWCV,namespace, intreface ( outbound) and create the proxy , later give the name starts with z, later in ABAP program create the internal table of type of the Structure for the message type in ABAP Data Dictionary (ZBLOGEMP_PROFILE_MSG )
so follow the code and explained about each ob, structure of Msg ..
Regards
Chilla

Fault message handling in abap client proxy

Hi experts,
i have scenario like this SAPECC---XI---WEBservice
i was decided to using the ABAP CLIENT proxy in sender side and soap adapter communication in receiver side
i will be get the wsdl file form client
problem is i am in bit of confusion like am i need to create fault message for this asychronous scenario?
how can i create the fault message for this scenario(that WSDL) and how the abaperwill handle those error
thanks in advance

Hi.
You can use fault message but it won´t return a error to your ABAP Proxy because your interface is ASSYNC. The fault message generated will stop in Adapter Engine.
If you need a return of the error, you have to change your interface to Sync mode.
To get more information, follow the link below:
Fault Message Type
http://help.sap.com/saphelp_nwpi711/helpdata/en/dd/b7623c6369f454e10000000a114084/frameset.htm
Best Regards.
Bruno

ABAP client proxy from WSDL

I have 2 problems in creating abap client proxies using wsdl
1.when i try to create client proxy by giving RPC style wsdl(generated by SAP itself for a RFC) the system throws an error and not allowing to create the proxy
2.The client proxy which i have created for a wsdl(either SAP created document type/any wsdl from commercial websites) gives an error "No receiver could be found"
could somebody please clarify and help me to solve the problem.
Thanks in advance.
Vasanth.

Hi Vasanth,
There are many threads and blogs on this topic.
Choose the search Forum on the Forum page and select "All categories" in the Category field and enter your topic "ABAP client proxy from WSDL" in the search field.
Rgds,
Sam Raju

ABAP Client Proxy to File (File is not getting generated)

Hi All,
I'm trying out a scenario ABAP proxy --> XI --> FILE.
I have followed the given blog to create ABAP client proxy.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
While executing the ABAP client proxy, the values are properly sent to XI and in the SXMB_MONI the message shows as successful. But the correspoding file is not created.
It seems everything is fine in the receiver adpater(Monitoring) and in the SXMB_MONI also the msg shows successful(receiver side).
The directory path and the corresping file creation parameters also looks fine.
Couldn't figure out what went wrong. Please help me on this.
Thanks,
Ajay.

Hi Smitha,
Please find below the Call Adapter trace
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external =</Trace>
<Trace level="1" type="T">Sender agency external =</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.0</Trace>
<Trace level="2" type="T">Host = iscsapapp4w:8010</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.0</Trace>
<Trace level="2" type="T">Remote address = 10.191.117.166</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0000</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0000</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = B2DD6D78BBF141458DDC0DDE39782DE3</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - ACN_LEGACY2_04_BS</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) ACN_LEGACY2_04_BS MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOM2__0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = NW2</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2006-04-03T10:24:14Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 791955998E03380CA938A0130A348AFB</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 3475AE80930811DAA18DC14C0ABF75A6</Trace>
<Trace level="1" type="T">Interface Mapping http://accenture.com/xi101/ABAPclientProxy IM_Valuemapping</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_Valuemapping_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_Valuemapping_.</Trace>
<Trace level="3" type="T">Load 3475ae80-9308-11da-a18d-c14c0abf75a6, http://accenture.com/xi101/ABAPclientProxy, -1, com/sap/xi/tf/_MM_Valuemapping_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_Valuemapping_.class (http://accenture.com/xi101/ABAPclientProxy, -1) in swcv 3475ae80-9308-11da-a18d-c14c0abf75a6.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_MM_Valuemapping_ completed. (executeStep() of com.sap.xi.tf._MM_Valuemapping_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-ACN_Sender_BS_XI</Trace>
<Trace level="2" type="T">-ACN_LEGACY2_04_BS</Trace>
<Trace level="2" type="T">http://accenture.com/xi101/ABAPclientProxy.MI_Client_Proxy_Inbound</Trace>
<Trace level="2" type="T">Channel found: - ACN_LEGACY2_04_BS - ValueMap_Repl_Receiver1</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="Timestamp">2006-04-03T10:24:15Z CET Start of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: File</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="3" type="T">Channel for adapter engine: File</Trace>
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
<Trace level="2" type="T">return fresh values from cache</Trace>
<Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.nw2.iscsapapp4w</Trace>
<Trace level="3" type="T">URL = http://iscsapapp4w.idcsap.com:51000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = XIISUSER</Trace>
<Trace level="3" type="T">Cached = X</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-04-03T10:24:19Z CET End of pipeline service processing PLSRVID= PLSRV_CALL_ADAPTER</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</SAP:Trace>
Thanks,
Jothivel.

About ABAP Client proxy

Hi Experts,
Through ABAP client proxy I am sending data to PI system, when i execute the calling program then it executes fine, but data is not going to PI system.
I couldn't find any message sent from R/3 in the SXMB_MONI (R/3 system).
R/3 to PI connection is fine.
Regards
Ramesh

I couldn't find any message sent from R/3 in the SXMB_MONI (R/3 system). -
> hope u r not checking in the R3 system for message !!!
Few of our shadow resources, they had similar kind of issue...they configured sender as business service....
so when they run the report program... it was not displayed in MONI..... the reason is agreements as sender business service.... as it cant find the proper receiver, and the proxy comes with Business system details...message wont be processed and cant see in MONI...
so just have look...have u configured like this?

ABAP Client Proxy Testing process

In case of the Abap server proxy by using this report program SPRX_TEST_INBOUND we can test by providing the Generated interface name and method name.
same like any Testing process is there for ABAP Client Proxy
please respond me.
IF possible provide some Mail Path for ABAP Client ans Server Proxy so i can refer.
I get a one good scenario in www.****************
file to ABAPproxy.

Hi,
For ABAP cllent proxy you need to develope your own ABAP code.
Please fidn here with the below link. Here you will get the testing ABAP code also
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Use this kind of coding for abap client proxy
*& Report ZBLOG_ABAP_PROXY
REPORT zblog_abap_proxy.
DATA prxy TYPE REF TO zblogco_proxy_interface_ob.
CREATE OBJECT prxy.
DATA it TYPE zblogemp_profile_msg.
TRY.
    it-emp_profile_msg-emp_name = 'Sravya'.
    it-emp_profile_msg-empno = '80101'.
    it-emp_profile_msg-DEPARTMENT_NAME = 'NetWeaver'.
    CALL METHOD prxy->execute_asynchronous
      EXPORTING
        output = it.
     commit work
CATCH cx_ai_system_fault .
    DATA fault TYPE REF TO cx_ai_system_fault .
    CREATE OBJECT fault.
    WRITE :/ fault->errortext.
ENDTRY.
Thanks
swarup

ABAP Client Proxy from ECC 6.0 to XI message irregular recieving

Hi Gurus
Any one has come across issue whereby the ECC 6 system trigger ABAP Client proxy to SAP PI 7.0. The first time the PI is able to recieve it in the SXI_MONITOR. But subsequent trigger from the ECC 6.0 system the SAP ABAP program to trigger the Client Proxy, the PI seem to lost connectivity and did not recieve any message. This is pretty strange and hopefully someone in SDN and enlighten me.
Thanks
Regards
On behalf of malcolm

Hi Santosh
I went to SMQR and register the queue, but it still did not reflect the locked queue when i trigger the ECC 6 to SAP PI 7.0. The green flag - schedule still appear in the SXMB_MONI queue. But i am quite puzzle as why the ABAP client proxy after sending message the first time and second time, the third time it stuck? And also it is not practical to everytime go to the SMQ1 or SMQ2 to unlock the queue. I don't think it a good solution for solving my problem, it is just a temporary solution.

HI experts please explain abap client proxy

Similar Messages

Maybe you are looking for