Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi or simply solve this, I have tryied shotdown pressing keys like P and R, option, etc. Please help me .

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

The new itunes is slow and I can not see my musics anymore. How can I have my musics listed like they were before?

The new itunes is slow and I can not see my musics anymore. How can I have my musics listed like they were before?

I have the same problem with new 11.0. Presentation of album data now seems scrambled in 'Album' screen. Instead of albums in alphabetical order with all album tracks I now get albums in the order of the Album Artist. Unless the album artist is EXACTLY the same, the tracks on any one album can be spread all over the screen (hopeless for compilations). Does anbody know how to get the Album screen to sort solely on the Album title?

My wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?

Hi, my wife uploaded new fonts to her macbook and now can not see any writing on her screen, can I fix this?
System fonts deleted accidentally. Does anyone know how I can fix this please?

Thanks Mike,
Absolutely right. I restarted in Safe Mode. This enabled me to see the actual text on the screen. Then I backed up. Then reinstalled. All fixed.
Thanks again,
Chris

In my Itunes account, I can not see my list of songs in my files, nor can I look for individual songs in the Itunes store. Basically, anywhere there are list, I can not see them. What can I do to fix this problem?

I am having trouble with my Itunes account on Windows XP . I can not see any list in my music files. The songs are there but I have to click on each song to see what it is. Also, in the itunes store, I can not see any pull down list or use my search bar. This happened when Itunes updated it's look. I can pull it up on my phone and see all of my purchased music. I would really appreciate knowing how to fix this problem. Thank you.
Traci Lemley

Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro. If I want to read on my mac I have to use Kindle or Nook. Which means any book I've already purchased through iBooks has to be read on my iPad. Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

I am running Windows 7. I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order). I can not see any recent remarks regarding how to keep them from being loaded in date order.

I am running Windows 7. I have 250 photos from a trip that I want to load to the iPad v 6.1.3.1 and show as slide show (in named order). I can not see any recent remarks regarding how to keep them from being loaded in date order

By default the photos will be sorted by the date modified.
iOS: Understanding photo sorting
Edit (touch) them in the order you want them to be shown.

Scanning in both HP Officejet 7210 and Samsung printer - the document scans but no file is generated - any ideas how to fix this? (It worked fine before installing Mavericks)

Scanning in both HP Officejet 7210 and Samsung printer - the document scans but no file is generated - any ideas how to fix this? (It worked fine before installing Mavericks)

PS: forgot to mention: if your printer is on your wifi network, you'll have to enter your wifi password on the printer to connect it to the network before Printers & Scanners will see it.
Sometimes a reset of the wifi system is needed too. A full set of directions would be:
Try:
uninstall all printer manufacturer apps and "utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
do a factory reset on your printer. You'll have to consult the printer manual for how.
power down everything: modem, router, computer, and printer
power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
enter your wifi password in your printer so it can connect to the network
go back to printers & scanners and it should see your printer and download a driver for it from Apple
resist the temptation to install any printer manufacturer apps in the future.

TS1717 My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message??

My itunes won't open - it says: 'The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem' I have tried un-installing then re-installing itunes and I still get the same message?? Can anyone help?

I have the exact same problem.
I have uninstalled the program, rebooted and downloaded the update again. Same problem, same message.
Please, where is that missing MSVCR80.dll? I don't remember misplacing it.
I'm a Windows 7 user.

Replace old router with WRT110 and now I can not see shared printer on network

Replaced a BEFW11S4 with a WRT110. Now I can not see a shared printer on the network any more. I have not changed anything on the computer that has the printer shared. I can see the internet on all the computers, but not the shared printer. can you help?

First which you need to check, is your printer is working Offline on your computer. In this case you need to Re-map your Printer on your Computers back again. First check if you have any Firewall or Antivurs Installed on your computer try to disable it and check if you are able to print from your computer. If not then try to Remap the printer on your computer.
Go to Network connections window and if you are able to see your computer name on which the printer is installed, then right click on the Printer and click on "Connect" or "MAP" once done you will be able to print from your computer.
Note down the IP address of the Computer on which you have Installed the Printer. (Click on Start - Run - CMD and click Ok, now in the command prompt type "ipconfig" and note down the Ip address, Then go to your other computer and Click on Start - Run - CMD and click Ok and now in the Command prompt type "ping (IP address of your main computer) and hit enter and check if you are getting any replies. If yes, then again click on "Start - Run - type ( \\ip address of your main computer) and click Ok, and now you will be able to see your printer name then right click on it and click on "Connect" or Map, once done, now check if you are able to print from your computer.

IMac can not see Windows machine on network

Hi guys,
Before the AirPort Extreme Update 2007-02, my iMac can connect and share with my Windows machine. However, after installing the AirPort Extreme Update 2007-02, my iMac can not see my Windows machine work-group anymore. How to fix this problem ?
Im using 20' iMac running on Mac OS X 10.4.8
Please help.
DeathNote
iMac 20' inch Mac OS X (10.4.8)

If reinstalling the current update doesn't work, perhaps that is because the update was completed properly, but in the process has messed up configuration settings files and preferences. If you can't find any problems in your settings through System Preferences, then there are probably hidden errors in the .plist files and the way to correct that is by manually wiping out all your network settings files and redoing everything in Network preferences may be a quicker fix than brain surgery. Try deleting these files, then reboot and redo your network settings appropriately..
These are all in the folder /Library/Preferences/SystemConfiguration:
com.apple.airport.preferences.plist
com.apple.nat.plist
NetworkInterfaces.plist
preferences.plist
Note, this will wipe out all network-related settings, and force the OS to rebuild default preference settings files for the built-in network devices. This is sometimes the only thing that will clear up bizarre networking issues, but generally speaking, it works well.. just don't forget to thoroughly note all your proper network settings including wireless network passwords and all that before you perform this house cleaning for reference as a precaution.

Can't see PC's on network, but can ping them, connect to server etc

Hi All
I'm experiencing something pretty bizarre.
I have a small network at my office. There are 3 PC's, and 2 Macs, one of them a Mac Mini running 10.6.5. All computers are set to the same workgroup. All the PCs can see all the Macs, no problem.
Yet my Mac Mini can (most of the time) only see the other Mac. (When I use Go > Network).
I can ping all the PC's from the Mac Mini. But they won't show up in the network view.
The annoying thing is sometimes I can see all the PC's (theres no pattern to it!) and I have connected to a printer on one of the PC's. With that particular PC, if I use 'Connect to Server' I get
'Select the volumes you want to mount on "packing-pc" but there are no volumes in the list.
Whats really bugging me is that sometimes all the pcs are there when I view the network, and sometimes they aren't.
ANyone got any ideas please? I'm pulling my hair out! I wanna ditch my PC at work but until I can print reliably (to the PC with the printer attached) I can't!
Thanks in anticipation!
Mark

I'm wondering if this is connected?
http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/2c98eb8c- 8234-4060-b8a7-e484ca29df72

Wifi shows no hardware installed.

It started off with my key board. Alphabet p, k, m stopped working properly. Now i just turned on my mac amd suddenly black screen came and the screen was totally black. The led led of apple symbol wasnt working properly. So i just opened the flap and took out the battery amd ram. After that i plugged all of them back to normal. Now the laptop started but the wifi symbol shows no hardware for wifi installed. Any suggestions for these problems???

In some cases, this issue is caused by a hardware fault. A loose connection, a short circuit, or a microscopic break in a solder joint may open and close depending on temperature, making the failure intermittent.
Test after taking each of the following steps that you haven't already taken. Back up all data before making any changes.
1. If you can connect to the Internet via Ethernet, Bluetooth, or a USB network device, make sure all available OS X updates are installed. If Wi-Fi is your only means of network access, skip this step.
2.. There are a few reports that the problem was solved by unchecking the box marked
Wake for Wi-Fi network access
in the Power Adapter tab of the Energy Saver preference pane. I can't confirm.
3. Reset the NVRAM.
4. Reset the System Management Controller.
5. Start up in Recovery mode. In the menu bar of the OS X Utilities screen, there's a Wi-Fi menu. Try to connect. If it works, select Install OS X. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
6. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

My ipod touch ( Gen 4 ) goes to home screen when loading a app, and sometimes in the middle of the app. Any ideas how to fix this? One game won't load at all now. Thanks in advance for the help..

I have had this touch for almost a year. It suddenly starts going to home screen in middle of app, or when loading the app. Contract Killers has worked fine since I dowloaded it, but is not loading at all now. If I restore, will I be able to get my progress back from the backup?

Reset did not work. Just completed the restore, seems to have fixed the other apps from going back to the home page, but not Contract Killer.. I assume it is now a error on Glu's part. Hopefully they will resolve the issue. Thank you so much for your response.

I can not see my friends to chat what can i do? thanks

in my face book where can i click to see my frieds to chat?
'''bold text'''

Try downloading these http://www.samsung.com/us/support/owners/product/SCH-I535MBBVZW
or searching for it here Verizon Wireless Cell Phones - Verizon Wireless Accessories | Samsung

I have East west plug-ins and have them PLAY updated! but still Logic can not see These plug-ins! can anyone tell me why?

I have East west plug-ins and I have PLAY updated! but still Logic can not see These plug-ins! (play) can anyone tell me why?

Hi
You may need to run Logic in 32bit mode to get the AudioUnit Manager to scan the new plugins?
http://support.apple.com/kb/TS3934
http://support.apple.com/kb/HT3989
http://support.apple.com/kb/TS3171
CCT

Can Not See a Movie I Rented

I just rented The Amazing Spider-Man, and I can not see movie I play.
I can only hear audio.
Anyone can help?

Rented movies downloaded to an Apple TV can't be transferred to any other device.
(86941)

Hi folks, you might know how to fix this: my wifi shows (no hardware installed) then I went to system preferences and deleted the wifi connection, I went also to system information and I can not see wifi listed on Network, how can I create a new wifi ?

Similar Messages

Maybe you are looking for