Hi,for gererating parter profiles automatically usint t-code bd64.

hi.
i wonna send idoc from ecc to xi.
and i am gonna use filter function of distribution model (bd64) to filter idoc according to the certain criteria i defined.
i have created model view in the ecc.
but there are not the string "No filter set" under my message type,so i can not double click it to create a filter.
why?
and that i have successfuly distributed it to xi ,because i have seen the identical model view in the xi.
next,
i  am gonna generate parther profile automatically.
so,
i choose menu item "environment--> generate parter profile"  using bd64 in XI to open a screen,and fill partner system,clicked execute button.
but a message occurs on the screen:
No message have been defined for the selection conditions in the model.
what' s wrong with the problem?

> i  am gonna generate parther profile automatically.
>
> so,
>
> i choose menu item "environment--> generate parter profile"  using bd64 in XI to open a screen,and fill partner system,clicked execute button.
>
> but a message occurs on the screen:
>
> No message have been defined for the selection conditions in the model.
>
>
> what' s wrong with the problem?
Not sure if I catch on, did you run bd64 on XI? ... Generally, after you have created model view on sender R/3 system, you should save it. Then, chose a model view for which you want to generate a partner profile and go to the menu "environment--> generate parter profile". Then partner profile will be generated.
Regards,
Jakub

Similar Messages

  • Is there a way to automate the tax code assignation on non PO documents lik

    I'm looking for a way to automate the tax code assignation on purchases, I'm aware of the condition techniques for POs, but I would like to understand if it can be also applied to the other document in purchases so we can have a totally automate process on tax code assignation.
    Documents like: Contracts, Info records, RFQ, Scheduling agreements, Outline Agremments

    What you need to do is to create condition tables & access sequences for condition type NAVS for purchasing documents like RFQ, Contract & Scheduling agreement. You can use the document types and document category to differentiate these. Obviously this is required only if your tax determination scenario is different between different document type, if the tax code to be determined is not linked to purchasing document type, then you only one access sequence which can have parameteris like PORG, vendor if required etc. which are common to all document types.
    Once this configuration is done, then you need to maintain condition records using transaction MEK1 and maintain the tax codes as per the combination of parameters.
    In case of Info-record, it is different as it is a master data and this automatic tax determination will not work there.

  • "Mfr part profile" setup for various material types

    Hello All,
    I'd like to set a default value of "Mfr part profile" field ("Purchasing" screen in 01 Std industry sequence) different for various material types. Currently I have 2 entries maintained in MaterialsManagement>Purchasing>MaterialMaster>DefineManufacturerPartProfile (one with AMPL management and one without). I'd like to get the first entry set as default for HAWA material type and the 2nd for ROH.
    Thanks in advance for your help on this!
    Jacek

    Hi Troinski,
    Its not possible in SAP, you can create Z transaction for create material wth dafult values.
    Thanks
    Bala

  • SAP PM-MM Linkage for spare parts planning

    Hi
    I need to know the linkages between SAP PM-MM for the spare material... do any one came across this concept ?
    - Pithan

    1.If you create PR for spare part from Maintenance order , when goods receipt comes to stores automatically notification gets created ,this setting is done in Material Master record.
    2.You create Equipment BOM & attach it to equipment , for easy way of putting this into order during planning.
    3.You can check Material Availability in Maintenance Order.
    4.You can define the scope of Check in "Availability Check for Material" , in Spro Customize , you define check should include Material in PR , PO or Quality inspection & other.
    5.From Task list which you have planned , you can check how much quantity is currently available or when to procure.
    6.You can define default external profile settings for external mat in SPRO settings
    regards

  • MAPI over HTTP not working correctly, Outlook 2013 clients prompting for credentials during profile creation or opening depending on security of virtual directory

    ENVIRONMENT
    -1 Exchange 2013 SP1 CU7 server with all roles that is also a hybrid server with Office 365 tenant, mailboxes are all on premise only LYNC online is being utilized right now.
    -Exchange 2013 public folders
    -Mix of Outlook 2013 SP1 and Outlook 2010 SP3 clients all fully update to day as of Feb 2015
    Outlook anywhere is working perfectly across all clients both internally and externally using autodiscover.  Both Outlook 2013 and 2010 clients can open the program and create a profile automatically via autodiscover and no additional logon prompts
    are seen.
    We set the internal and external mapi virtual directory URLs to a valid URL that also matches the Exchange 2013 SSL certificate.  We set the security to ntlm, negotiate on the mapi virtual directory.  We reset IIS and enabled mapi over http in
    the org config.  We run in to problems here.
    Outlook 2010 clients appear to be working fine.  We can create a new profile and open and close Outlook without any logon prompts and verify that MAPIHTTP and Negotiate are used to connect to Exchange.
    Outlook 2013 clients are having problems.  As soon as we try to create a profile it says your administrator has made a change that requires you to restart outlook and then a windows logon prompt appears. If we authenticate Outlook will open and connect.
      This logon prompt should not occur.    We can confirm that it is connecting via MAPI HTTP and Negotiate.
    If we set the mapi virtual directory to NTLM only then a logon prompt also appears during every open of Outlook 2013.  We can confirm that it is trying to connect with MAPIHTTP via NTLM in the outlook connection test screen.
    I do not understand this behavior by Outlook 2013 which was supposed to be designed with MAPI HTTP in mind.  I would think the same issues would occur with Outlook 2010 but they do not.  I am not sure how to resolve this and I am looking for help.

    I have the same problem. Exchange and Outlook are both up to date. After creating a new profile Outlook prompts for username/password. A lot of users also get this prompt while
    working - the profiles have been "migrated" from Exchange server 2010. <o:p></o:p>
    Niko, as i can see in your screenshot you do not have Mapi over HTTP enabled. Why? You can change settings in the security tab – if you have Mapi over
    HTTP enabled all options are grayed out (please correct me if I
    am wrong):
    This is a very annoying thing – does anybody else have the same problem?
    Any suggestions on this?
    Marc

  • How can i set different number of iterations for different scenario profiles that we add to "AutoPilot" in load testing of OATS

    Hi,
    I have few set of load test scenarios, I would like to add each of these test scenarios to "AutoPilot" and run each different scenario profile at different number of iterations.
    As in Oracle Load Testing the "Set Up AutoPilot" tab I see  a section like this "Iterations played by each user: ", which says run these many iterations for every virtual user of all profile added under "Submitted Profile Scenario". So is there any thing like that to set different iterations for every scenario profile added in Autopilot.
    Thanks in advance

    It's not a built-in feature to override a page's styles on a tab-by-tab or site-by-site basis, but perhaps someone has created an add-on for this?
    It also is possible to create style rules for particular sites and to apply them using either a userContent.css file or the Stylish extension. The Greasemonkey extension allows you to use JavaScript on a site-by-site basis, which provides further opportunity for customization. But these would take time and lots of testing to develop and perfect (and perfection might not be possible)...
    Regarding size, does the zoom feature help solve that part? In case you aren't familiar with the keyboard and mouse shortcuts for quickly changing the zoom level on a page, this article might be useful: [[Font size and zoom - increase the size of web pages]].

  • Best Practice for Plan for Every Part (PFEP) Database/Dashboard?

    Hello All-
    I was wondering if anyone had experience with implementing / developing a Plan for Every Part (PFEP) Database in SAP. My company is looking to migrate its existing PFEP solution (Custom developed Excel/Access system) into SAP. If you are unfamiliar, a PFEP is a dashboard view of a part/material that provides various business groups with dedicated views to data from Material Masters, Info Records, and Vendor Master Records and combines it with historical/forecasting information. The goal is to provide a single source to all the part/material settings for a given part.
    Is there a Best Practice PFEP in SAP? Or if this is something that most companies custom develop in ERP or BI?
    Thanks in advance.
    -Ron

    I think you will likely get a response in SAP ERP - Logistics Materials Management (SAP MM)
    additionally you might want to do some searches based on SAP Lean Inventory, perhaps Kanban. I am assuming you are not using WM or EWM either?
    Where I have seen PFEP incorporated into the supply chain strategy this typically requires not inconsiderable additions to the alternate UoM in MM dropping of automatic replenishment levels (reorder level) and rethinking aspects of the MRP plan so be prepared or significant additional data management work if you haven't already started on that. I believe Ryder logistics uses PFEP and theirSAP infrstructure is managed by IBM; might be an idea to try and find a linkedin  resource from there. You may also find one of the ASUG supply chain,logistics,  MM or WM sigs a good place to also ask questions and look for answers.

  • Reverse excise part 2  automatically.

    Hi,
    When I post a GR, excise Part 1 and Part 2 is updated.
    But, when I cancel the same GR, only excise part 1 is reversed.
    How to cancel or reverse the Part 2 AUTOMATICALLY, without running the t code-JIIEX
    (for Change, Post, Cancel excise invocie).
    Any user exits or enhancements are available.
    Pls suggest.

    as well as i am concerned,
       we cant reverse excise part 2 automatically, u have to do it with j1iex by select post excise invoice, and entering vendor excise invoice no.

  • CR 6.1 - Unable to locate lens profile automatically

    Raw files from Canon camera are correctly identified and lens distortion is corrected automatically, but on jpgs from same camera I get this error: "unable to locate lens profile automatically".Can't even do it manually as lens profile that is available for raw file is missing from drop down menu on jpgs. Also weird because it does show some lens profiles in drop downs, just not the right one. But, again, right one is there for raw files. Weird!

    That is because lens profiles for raw and non-raw are necessarily different and separate (like color profiles). We have more raw lens files available than non-raw lens profiles (e.g., Canon 70-200 lenses). As a general rule, I would encourage you to be applying lens corrections via profiles at the raw stage in CR, rather than to JPEGs/TIFFs (given a choice between the two), because of various technical advantages in the former case.
    Eric

  • IPhone 4S (IOS 7.0.2) is changing (or skipping parts) songs automatically when I unlock the device.

    My iPhone 4S (IOS 7.0.2) is changing (or skiping parts) songs automatically when I unlock the device, since the update to 7.0.2.
    The song is playing on background, so when I need to access something, I go and type my password, and the song goes backwards, or it completely changes songs / artists. Sometimes it just stops for less than a second, and starts playing again, normally.
    What's happening?

    I experienced such behavior few times (also on 4S). It's especially annoying when you listen audiobooks. I think it's a bug, and at this moment there's no remedy for it - at least I haven't found it.

  • Move firefox profile automatic

    Hello Everyone,
    On my company I'm working on a replacement of 100 virtual Windows machines. The users on the old virtual machines are complaining about the FireFox profile is overwriting the max profile size of the windows profile... Some users have moved the FF profile to a different location and has a size near 300MB. On the new virtuals I really want to move the FF profile automatically on startup or something. So users don't have the problem with the profile size. Is there any way to do this? Maybe with a startup of logon script? Or a policy setting.
    I hope someone can help me with this.

    Hey,
    There are a few known alternatives that is part of the ESR community knowledge:
    *[https://wiki.mozilla.org/Deployment:Deploying_Firefox#Deployment_Tools]
    *[http://benjamin.smedbergs.us/release-repackager/] Looks pretty good, but please test it on the virtual environment first as you did not specify what virtual machine manager you were using.
    *updated 1.5 [https://wiki.mozilla.org/Firefox:1.5_Institutional_Deployment]
    I hope this puts you in the right direction. Please let us know if you need more resources.
    If you need more suggestions

  • Standard Report for missing parts at production order operation level?

    Hi PP Gurus,
                We have standard report for missing parts at production orders level.
    For our client, they need a report for missing parts analysis at production order operation level. Do we have any such standard report in the SAP?
    Please help.
    Thanks,
    Reddy.

    Hi Arvind,
          Thanks for for your response.
    1. List: Components,  Layout: Standard layout          set the Missing part
           It shows the component requirement/withdrawn  quantity for each operation of production order. It is not showing the commit quantity.
    2. List: Components,  Layout: Pick list          set the Missing part
           It shows the component requirement/withdrawn  quantity for each production order.
    3. List: Components,  Layout: Missing Parts List-Material View          set the Missing part
           It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
    4. List: Components,  Layout: Missing Parts List-Order View          set the Missing part
           It shows the component requirement/commit quantity for each production order. It is not showing the commit quantity at opertion level.
          We are unable to get the solution from all these 1 to 4 reports from COOIS.
    Do we have any option to change the existing layout (ex: 3 ) to get the commit quantity for operation with missing parts indicator?
    If avilable, what is the procedure to be followed?
    Thanks,
    Reddy.

  • Inventory aging report for vehicle parts

    Hello Guys,
    I need to prepare an inventory aging report for Vehicle parts.
    We already have new vehice ad used vehicle's inventory aging reports created by somebody else.
    I am very new to sap-bi.
    I am very confused about designing same cz i checked with the fields ad they are a ittle different from the fields which are there in above two reports.
    I have downloaded 0ic_c03 from business content but do not know how to prepare its datasource......
    Please tell me how should i go about it.
    Thanks & Regards,
    Dolly

    Hi Dolly,
    What is your question? It's almost impossible to provide an answer without any information.
    Perhaps you should try to ask in your company for some help.
    Cheers

  • I refuse to pay for a one year automatic subscription for Cosumer report that was charged to my account today without me noticing. How can I cancel that and get reimbursed now?

    I refuse to pay for a one year automatic subscription for Cosumer report that was charged to my account today without me noticing. How can I cancel that and get reimbursed now?
    Patrick

    First turn off auto-renewing subscriptions:
    iTunes Store: Purchasing and managing auto-renewing subscriptions
    Getting a refund won't be as simple. For that you will have to contact iTunes Store Support.

  • Windows 7 very slow logon, Waiting for the User Profile Service, winlogon event 6006

    Hello,
    Every so often one of our Windows 7 clients which is not normally having any delay at logon will take a very long time to login. This may be 10 or 20 minutes or up to an hour in some cases.
    Typically the event log will contain entries like
    The winlogon notification subscriber <Profiles> took 572 second(s) to handle the notification event (Logon).
    There is no further information available from Event Log Online Help, nor any additional detail as to why the logon event was so slow. During the delay the user will just see "Waiting for the User Profile Service" on their screen.
    We first started seeing this problem with Windows Vista and if anything the situation has not improved since then. It has never happened with any of our Windows XP users.
    We are currently planning a migration of computers to Windows 7 but stuff like this which has not been resolved in Windows over a 2 year period will stall that migration. The least improvement is to increase the event notification to give a lot more
    information on why the user profile processing has stalled.

    Hi,
    When did the issue begin to occur? Did it occur after installing certain application or applying certain policy?
    To troubleshoot the issue, please perform the following step.
    1. Restart the machine in Safe Mode with Networking to check whether the system can login quicker.
    2. Type “gpedit.msc” in Search box and press Enter. Navigate to the following location:
    Computer Configuration->Administrative Templates->System->Logon
    Please double click “Always wait for the network at computer startup and logon” policy and disable it.
    3. Perform a
    Clean Boot to check the result.
    Thanks,
    Novak

Maybe you are looking for