Hi friends a doubt on Business package

we have imported a BP (say version 1).after imported u can find some
iViews in u r PCD. amoung this ,some iviews has been modified,
now consider that u have again imported the same BP but this time
the version is different (say version 2), when u have imported the
latest version. it should not overrite the previous properties
how u can do this?

Hi Sunder,
During BP installation ,as per the SAP guidelines it says that a backup of the Business Package has to kept in the local system because as we all know that evry fortnight a new version is out and replaces the older one.
So as per my knowledge any new version will replace the whole content assuming it to be a new package altogether.Hence theres no method available in Portal to effect only some part of BP not affected...
Generally the new version includes most of the iviews unchanged but only some extra features added ..Nytime u need the old one ,transport the old version from the dump .
Thanks,
Swathi
please offer points if the message was helpful.

Similar Messages

I'm trying to download office 365 small business package, and every time I try the website it says there is a runtime service error in the '/' application. Is this my mac or is it the website, and how can I fix it?

I'm trying to download office 365 small business package, and every time I try the website it says there is a runtime service error in the '/' application. Is this my mac or is it the website, and how can I fix it?

If a phone is sold from one friend to another and wants to use it on a different carrier the friend can contact the carrier it was sold by to request it unlocked. I know AT&T, Verizon, and Sprint will give you the steps to unlock it as long as the original contract it was bought under has been completed. eBay/Craigslist is really not the best place to try to get "unlocked phones" from, if it turns out the phone isn't unlocked then I'm really sorry you got stuck with that one and as stevejobsfan said above I would report them immediately and see if you can recover your money. I sell phones for a living and this happens a lot

Print functionality in MDM Standard Business Packages iViews

Hi Experts,
I have successfully connected MDM repository and EP and created system objects and system aliases and suitable user mapping. Now I am having a page with 5 iViews - Text Search, PickList search, Hierarchy search, Resultset and ItemDetails.
The requirement is to have a print button in the page which when, clicked will generate a user friendly (preferrably a PDF) page and will allow the user to take a print out of the resulting PDF page generated.
I have gone through the following links
[Re: Print button;
To be more specific, I am still not sure how to add a custom button and action to a standard iView - the deployed portal content is not a Web Dynpro application =, although I am not very sure what exactly is it.
Regards.
Rohit

Hi vara,
Question 1: How to add default search criteria to Search iViews in
MDM Portal Business Package
Ans. You can make use of Named Searches. Open the Data Manager Create a entry in the Named Search table, select the desired Supplier as a search criteria and save the search in the Named Search created and assign this Named Search to the user in MDM Console. Now use this user while performing User Mapping step. This will limit the Records to the search criteria of the named search and whenever you create new records satisfying the search criteria, it will get added to named search automatically.
For 2 and 3
I tried this in MDM 5.5 SP02, but no luck
Regards,
Jitesh Talreja

ESS Accounting business packages

Hi Friends,
We are planning to implement EP7.0.ESS accounting business packages. To implement ESS do we need to have SAP HR module implemented in our System or not required. if we are configuring the SAP Users in portal. Is there any chance to reduce the cost cutting in users license? Wht are the benefits?? wht is each user cost?? wht are the free business packages??
Thanks & Regards,
Priya
Message was edited by:
PRIYA REDDY

Hi Krishna
Plz give me more details with out using HR module or Business Packages how can bring the Accounting Functionality into the portal.
Regards,
Priya

Does ESS business package have Recruitment in it

Hi Experts,
My Doubt is can we get Standard content of Recruitment as a part of ESS.?
( Content regards to content in Portal)
what are the business packages which have Recruit standard content.
is it possible to include the recruitment standard in ESS?
I am not well versed with the BPs ..help in clearing these doubts
With Regards,
Dayakar.
Edited by: DayakarMaidsetty on May 4, 2010 1:40 PM

I think believe ESS provides the following Recruitment content
Career and Job
Technical name: com.sap.pct.erp.ess.area_career_job
Use
Employees can use the applications in this area to:
·        Maintain their candidate profile
·        Display an overview of the data in the candidate profile
·        Release candidate profile
·        Apply directly to a job posting
·        Search for suitable jobs
·        Display a list of job postings that they have stored as favorites
·        Send applications
·        Store personal settings
·        Maintain their skills profile
I guess install the BP, setup ER and see whats available
The specific ESS view could be a mix of WD JAVA iviews or apps, BSP and WD ABAP depending on the ESS and ER version
Certainly it is possible to incorporate more PA-ER BSP or WD ABAP applications into the ESS role via a custom iview and role
Best wishes
Stuart

Business Packages required for SAP EP.

Hi Friends,
I have installed SAP NetWeaver with software Units AS Java, DI, EP Core and EP.
Then updated the system with SP Stack 17.
Now, I need to apply business packages for following modules.
Employee Self Service
Management Self Service
Expense and Time Management
HR Administration
Self Service Administration
SAP Learning Solution
I would like to know what all business packages need to be applied. And from which path SAP Service market place I can download them?
Thank you for your help in advance.
Regards,
Prashanth.R.G.

Prashanth,
Check this wiki.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/todownloadPortalrelatedBusiness+packages
https://www.sdn.sap.com/irj/scn/wiki?path=/display/ep/downloadingaBusinessPackageanduploadingthe+files
https://www.sdn.sap.com/irj/scn/wiki?path=/pages/viewpage.action&pageid=31476
Regards,
Sandeep Tudumu
Edited by: Sandeep Tudumu on Dec 4, 2008 5:42 PM

Standered business package for BI reports with SAP EP Integration

Hi Friends,
I want to know is there any standered business package for integrating BI content with SAP enterprise portal.As i heard the business package come up with predefined iview and which can be customized as per our requirement .
I have worked on Cognos business package in my previous project .but current requirement is i need to dispay the BI Reports strucuture in Portal as folder heirachy with Icons.
I am using BI and EP portal version as 7.0.
please share the package name ASAP.
Regards
Ratnakar

closed
Edited by: ratnakar reddy alwala on Oct 3, 2008 11:46 AM

Business Package for E-Recruitment

Dear Friends,
Can any one of you please do let us know what is the standard business package for E-Recruitment?
We are using ECC6.0 without any enhancement packages. We are having a addon for E-Recruitment. Name of the addon is SAPK-60014INERECRUIT. We are using EP 7.0.
Do we need to deploy the business package in EP like we do for ESS/MSS or else is it only in R/3?
Kindly do help us.
Thanks in advance.
Regards,
Sananthanan

Dear Sananthanan,
As per my knowledge there are no SAP provided Busssiness Pakage for eRecruitment,
in our organization we have created the portal content for eRecruitment module,
as we were also not able to get the required bussiness pakages.
Warm Regards
Upendra Agrawal

Configuring business packages in E.P 7.0

Hi friends,
Can anybody tell me the stpes in brief regarding how to configure the business packages in E.P 7.0. And if something need to be implemented in the business package , say for example in ESS(HR) , where i can go and make changes accordingly in the backend.
Thanks in advance.
Regards
Sireesha.

Hi,
Yes, please check this link..
http://help.sap.com/saphelp_erp2005vp/helpdata/en/02/77076875ab41539ca4407f9bd06fe0/frameset.htm
Thanks
Regards
Santy..

Customizing business package

Hi,
I have a doubt regarding customizing the business package. we have downloaded and installed a business package. now i want to change some worksets and pages. so I made a local copy of all the worksets, roles, pages, iviews into my name space.
now, say i want to add a workset "XyZ" to a role campaignmanager, which came with business package. as i have copied them and pasted as delta link in my local workspace (CampaingMangerDL), I have added ths workset to the to this CampaignManagerDL role.
but my question is, when i open this DL(DeltaLink) role, CampaignManagerDL. It shows the attached worksets to that role, but all those worksets which are shown there are in SAP namespace.(for example Campaign management (com.sap.) ). should i delete it and add the workset (campaignmanagementDL workset, Delta link of original CampaignManagement (com.sap.) ) which is in my local namespace.
what is the procedure in the normal portal implementations.
Could some one guide me regarding this.
please help me in this regard
Thank you

Hi
The difference of a delta link is that u can change anything in targeti.e ur delta role that will not be affected in original source i.e original role in ur business package.but if you change anything in source it will effect ur delta role.use this principle u ur self will be able to find solutions
of this part
<b>but my question is, when i open this DL(DeltaLink) role, CampaignManagerDL. It shows the attached worksets to that role, but all those worksets which are shown there are in SAP namespace.(for example Campaign management (com.sap.) ). should i delete it and add the workset (campaignmanagementDL workset, Delta link of original CampaignManagement (com.sap.) ) which is in my local namespace.</b>
With regards
subrato kundu

Business package, different format

Hi online friends,
FYI
i found that higher version business packages are .sca, so we have to deploy them via SDM.
and also i noticed that higher version bps are published with name 'support pakcage01..'.
if i am wrong, please correct me.
Br,
Nikko

Hi Christian,
Two different system has to be created in portal. In the system object you have to set the connector properties, user admin, user mapping and the WAS for BW and ITS for R/3 properties.
You have to create the system alias and the test the connection.
For import and export of the certificates. you have to use Strustsso2 transaction.
Regards
Arun

Best Practice in using Business Packages

Hi All,
Are there any Best Practices in the use of Business Package content? Do you assign the Roles delivered by the Business Package and do you make changes to the original iViews?
or
Do you copy the content delivered in the Business Package to a new folder and work with there?
These questions are purely at the configuration level and not at the Java coding level. For instance if I want to turn of the iView Tray, or change a parameter such as height, or even remove an iView from a page or Role.
I would like to know the various approaches the SDN community uses and the different challenges and benefits that result in each approach.
Look forward to hearing from you all
Paul

Hi Paul,
I also build my own roles. The only time I might use the standard roles is for demo purposes early in a project. You will find that in some cases the business packages like MSS don't always even include standard roles, so you have no choice but to build.
I never change any of the standard iViews/Pages/Worksets - ever.
The most contentious issue seems to be whether to do a full or delta link copy of the standard objects. I tend to initially do a full copy of the objects into a custom folder set in the PCD and modify those. Then I only use delta links from Page to iViews where I need the option of setting different properties for the same iView if it appears in multiple pages. Delta links can be a bit flakey at times, so I tend to only use them where I have to. I suspect that I may get to a point where I don't use them at all.
Just my 2 cents worth....
Regards,
John

Relationship between Portal and back-end roles in business package

Hi all,
I wonder how technically works on the backend system when I install a BP for SAP EP. Let's say for example that I installed on the portal the business package for SRM. I will have on the Portal some roles configured (buyer, supplier, invoice manager, etc), and some iviews in them organized by pages and workest.
How can I see the relations with those roles and the roles on the SRM backend system? And then: if I modify a standard role on the Portal, adding new functionalites (iviews), I do update the backend role? We are going to implement SSO, and users will be the same on Portal and backend system. But that also means I need to assign users to backend roles on the backend system, isn't it?
I would be glad to you if someone can provide me also a link to a document explaining the relationshipe between backend roles management and portal roles management.
Thanks a lot,
Valentina

To add.. no, you will not update a backend SRM role if you update an iView on the Portal. The Backend roles will always be assigned to the user via PFCG and do not change automatically with the Portal roles.
This help document might help you understand the concept better (Look at the Permissions vs Authorisations section):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c605c690-0201-0010-e8b5-94677245a46b
Hope this helps. I am sure SAP/SDN library has many such documents that you can read through.
Sudha
Message was edited by:
Sudha Mohan

Key Figure Monitor in Prod Superviosr business package

hi,
I am trying to set up Key Figure monitor in the Production supervioser business package. I am getting the below error
Invalid/No Context ID
The application 'Generic Key Figure Monitor' requires a unique context ID. The context ID is a four-character alphanumeric code that you must enter as the application parameter I_CONTEXT_ID in the starting iView in the Enterprise Portal.
Contact your system administrator
I have set up the I_CONTEXT_ID in the iview in Portal and defined the key figure categories and key figures in R3.
I would like to knwo the relation between I_CONTEXT_ID and Key figure and where is it set ?
Can some one help in the steps to get this working.
Appreciate your help
Regards
PN
Message was edited by:
        Portal Newbie

Not sure if you got an answer for this question. Just saw this..
See SAP Help URL http://help.sap.com/saphelp_erp2005/helpdata/en/42/ef6861370a1bcae10000000a11466f/content.htm
Excerpt below from SAP Help on Context ID:
Including the Generic Key Figure Monitor in the SAP NetWeaver Portal
Use
You only have to carry out this procedure if you want to put together your own portal role using various parts developed by SAP or by yourself.
Prerequisites
·        You are in the content administration for the Portal.
·        You have created a role in the portal.
·        You want to include the KEY_FIGURE_MONITOR iView from the Common Parts business package in the portal page of your role using delta link. The iView is called Key Figure Monitor.
·        In the I_CONTEXT_ID parameter, you have created a unique four-digit alphanumerical key for the generic key figure monitor that identifies an instance of the key figure monitor within the role. If you want to use the key figure monitor more than once in your role, you must create a unique key each time you use the generic key figure monitor in the role.
You have created a role in the portal. This role contains two iViews, which contain the generic key figure monitor. iView aaa.bbb.ccc and iView xxx.yyy.zzz. Set the following values in the Property Editor for the iViews in the property category Application Parameters:
§         For the iView aaa.bbb.ccc: I_CONTEXT_ID=1111
§         For the iView xxx.yyy.zzz: I_CONTEXT_ID=2222

Modification of ABAP Web DynPro iViews delivered via Business Packages

Hello Everyone,
If this has been answered before, I apologize.
Is there any 'supported' way ( or 'unsupported' ) to modify the out of the box ABAP WebDynPro iViews which are delivered via some of the new Business Packages for ECC 6.0?
For example, I want to hide some fields on the 'Create Order' iView delivered in the Business Package for Internal Sale Representative..
Thanks

These Business Packages are just iView definitions that point to normal Web Dynpro ABAP components/applications that reside on the backend ABAP system. They can be enhnaced like any other WDA application.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/6b/edc21e5e1e4a33a492b8955afffac7/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/b170d256293c5ce10000000a421937/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c5/f4b9422e0fb911e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/9f/95467bbefc4a808fffeba4c5177258/frameset.htm

Hi friends a doubt on Business package

Similar Messages

Maybe you are looking for