Hi Friends Can we Maintain Credit Control settings as per Profit Centre

Hi ,
how to Maintain Credit Mgmt settings as per Profit Centre.
Thanks in advance,
Siva

Hi Siva,
We Can not Maintain Credit Control settings as per Profit Centre. Because Profit Centers are used for Internal Control purposes enabling management the ability to review areas of responsibility within their organization.
Hope this is clear.
Regards,
Ravi Duggirala.

Similar Messages

How can I restore Parental Control Settings from Time Machine Backup?

I was trying to adjust one of the parental controlled accounts for my child. I disabled parental controls, rebooted, and re-enabled it. Now all the settings that I had setup before are gone. How can I restore Parental Control Settings from Time Machine Backup?

Hi ...
I've found a solution to my problem.
Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
Hope this helps.
BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
(Thanks goes to Pondini!)

Can't receive emails but can send. Checked all settings as per help all ok. Tried deleting and adding. All ok on other devices

I Can't receive emails but cand send. Just stopped working. I have checked all settings and also tried deleting account and re adding. Email account ok as works on my phone and laptop. What else could I try?

Go into the account again and look at the settings for the mail server. That is what receives the mail. Make sure that your username and password are entered everywhere, even where the phone states optional. I'm guessing that you are connected to Wi-Fi on the iPad at the time you are trying to get the mail?

Can we maintain Letter of credit in sap

Hi Friends,
Can we maintain LC in sap ? If so Please tell how to maintain.
Regards

HI,
Link below may be of use to you.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/letterofCredit
http://help.sap.com/erp2005_ehp_01/helpdata/en/95/3ca410110511d4b5ae006094b9ec21/frameset.htm
You can map the Import cycle in SAP. The standard business practices in SAP are
1. Create the Import pricing procedure with all necessary import conditions like customs duty, CVD, Landing cost, handling charges, Freight charges etc. Assign it to the schema group & inturn to Pur. organisation.
2.Create the import vendor master record.Assign the import schema group to this vendor. So that while creating import PO for this venor, the system will determine the import conditions.
3.Create the Import Po with Zero tax code & also with req Payment terms.
4.Enter the Customs vendor against the Customs & CVD conditions. Also maintain Freight vendor against freight conditions in the PO itself.
5.Do the MIRO for Customs vendor. Enter manually all the details in MIRO take the ref as a Bill of entry,
5.Do the MIGO for PO, Capture the excise & post the doc. As per Indian Govt Excise rule, you can take the credit of CVD as Excise.
6.Post the Excise doc.
7.Do the MIRO for material vendor.
8.Clear the Payment.
Thanks & Regards,
Kiran

Can we assign 1 credit control for multiple company codes

hi,
sap gurus,
good afternoon to all
can we assign 1 credit control area for multiple company codes.
if yes can any body explain the pro's and cons of the assignment.
if no can any body explain the why?
its urgent plz.......
regards,
balaji.t
09990019711

Yes Balaji,
We can assign.
Here the risk categiry and terms of one credit control area will be applicable to all company code.
Credit Control Area
Definition
An organizational unit that represents the area where customer credit is awarded and monitored.
This organizational unit can either be a single or several company codes, if credit control is
performed across several company codes. One credit control area contains credit control
information for each customer.
Use
Credit and risk management takes place in the credit control area. According to your corporate
requirements, you can implement credit management that is centralized, decentralized, or
somewhere in between.
For example, if your credit management is centralized, you can define one credit control
area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you
can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level.
You set up credit control areas and other data related to credit management in Customizing for
Financial Accounting. For more information, see the Implementation Guide under Enterprise
Structure Definition or Assignment Financial Accounting and then Maintain credit control
area. You assign customers to specific credit control areas and specify the appropriate credit
limits in the customer master record.
Thanks,
Raja

Can we assign 2 credit control area for one company codes

hi,
sap gurus,
can we assign 2 credit control areas to one company codes ?
yes we can.
but
what is the impact of that
can any one analyse.
regards,
balaji.t
09990019711

Hi,
we can have multiple credit control areas based on req-
eg: client wants to restrict customer based on divisoin wise.
then we will maintain credit control area based on sales area
there 3 division in a comp: AA -BB - CC
thens sales areas will be:
1000-10 -AA
1000-10-BB
1000-10-CC ( assuming therez one sales org-1000 & dc 10)
now create 3 cr control areas- OB45
Assign sales area to cr Control area - OVFL
Assign permitted credit control areas to comp code - IMG- FA- AR&AP- Credit Management- Credit control account - Assign permitted credit control areas to comp code.
Now you can assign this Cr CA- by sales area wise in CMR & maintain the credit limits for each Cr CA.
So when ever your needs wants to do it by division or sales area wise you can do this.
Thanks,
Raja

Can we have 2 credit control area for one sales organisation

hi,
sap gurus,
good afternoon,
can we have 2 credit control area for one sales organisation.
plz explain the impact from taking fi and sd into consideration.
regards,
balaji.t
09990019711

Dear Balaji,
We can't assign credit control area to the sales organisation
Sales area will be assigned to the Credit control area
Only one credit control area will be assigned to each sales area.
More then one credit control area will not be assigned to single sales area.
But one Credit control area we can assign to more than one sales areas.
I hope it will help you,
Regards,
Murali.

Credit control sales area wise

Dear Friends,
Sales organisation model is
my company is distributor for all manufacturers, it will take care of credit control
so we proposed a sales area which resembles like this Mumbai -glaxo- pharma,
Mumbai -Novartis- pharma(sales org-disti chnl-divison) etc.
this sales areas will contain all customer and materials of glaxo
some of the stockists are stockists for both glaxo and novartis so I extend the customer
to one more sales area
if I maintain credit control areas w.r.t to sales area wise what are the implications
will ready to be happen?
how can I monitor the total credit for the customer?
is it necessary to assign a credit control at company code level?
The process i proposed here is
I will assign credit control at sales area level
and I will maintain credit limit details at FD32
so I can assign credit controls per sales area wise for same customer .
What are the pros and cons of this process?
Waiting for replies,
Thanks

my dear,
Here my requirement is i will not assign any credit control area at company code level
i will assign cca at sales area level only, and it is working fine.
i need the PROS & CONS when i use like this way.

Credit control area CCAJ not permitted for company code 1301

Hi All,
We have One company code, under that we have two credit Control Areas.
In the Config settings, we have maintained for (Assining the compnay code to Credit Control Area) to one CCA.
Now, it is while creating the Invoice for another CCA. It is throwing the below error.
Credit control area CCAJ not permitted for company code 1301
Message no. F4746
Please guide.
Regards
Vinay

Hi Vinay,
To do this you have to go to the path SPROFINANCIAL ACCOUNTING-ACCOUNTS RECIEVABLES/PAYBLES-CREDIT MANAGEMENT-CREDIT CONTROL ACCOUNTASSIGN PERMITTED CONTROL AREAS TO COMPANY CODE. In this activity you can enter additional credit control areas which are allowed for each company code, in addition to this default credit control area.
You can enter these credit control areas in the line item or let the system determine them from the order data, customer data, or a user exit in the order. This way you can use the control area as a flexible internal control instrument and data which has to be posted in the same company code for accounting reasons no longer has to be managed in the same control area.
Regards
Ram Pedarla

Sales order credit control area

Hi,
How can i identify the credit control area the sales order belongs to?
Is there any way to identify in the SO itself?
(not checking the sales org and checking the cc ar)

Credit Control
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors.
Credit Management
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
u2022 SM30 - Table/View
u2022 V_TVTW - Define Distribution Channel
u2022 V_TVTA_KKB - Assign sales area to credit control area
u2022 V_T014 - FI - Define Credit Control Area
u2022 T001CM - FI - Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
Distribution Channel
Division
Distribution Channel
Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
u2022 Check Credit
o A - Credit limit check and warning message
o B - Credit limit check and error message (no sales order can be created)
o C - Credit limit check and delivery block (block delivery if hit credit limit)
 Options B and C -> used for checking open order values (when you create/change the sales order)
o D - Automatic credit control with open order values
 More control in transaction OVA8 - Automatic credit control
 You check for open orders and deliveries, or just open deliveries.
 or open order values with other options
u2022 Credit group
o Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents - Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
u2022 whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
u2022 Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D - automatic credit check).
u2022 SAP default credit groups
o 01 - credit group for sales order
o 02 - credit group for delivery
o 03 - credit group for goods issue
OVA8 - Automatic credit control - Double click on the line items you can have the followings credit limit check:-
u2022 Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
u2022 Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.Max open items %
The customer balance must not exceed a certain percentage.
u2022 Oldest open items
If you donu2019t want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
u2022 Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
u2022 Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.You can use the u201CNextReview dateu201D and u201CNumber of daysu201D fields and combined it with the u201CLast int.reviewu201D field in customer credit master u201CStatusu201D view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
Releasing the Credit Block
These are the three transaction code you can used for releasing the SAP credit management block.
VKM3 - Sales Order
VKM5 - Delivery Order
VKM4 - Both Sales Order and Delivery Order
There are basically two types of customers:
1)Credit worthy
2)Normal customers
Coming to credit worthy customers these customers we can believe and we will give some credit ness for them.For such a type of customers we are going to set them some credit limit.Based on that we will give service to them till that limit.It the limit crosses we will get the messages while creating orders for them.
Their credit limit can be set in FD32 T.Code.
Automatic credit check will be maintained in OVA8
Follow these steps:
1. Go to IMG - enterprise structure - definition - financial accounting - define credit control area.
2. Assignment of company code to credit control area & sales area to credit control area.
3. Go to OVAK select ur sales document type and in the check credit column choose from A B or C. D is for automatic credit control for which you have to maintain the credit group and risk categories.
4. In FD32 you select your customer and click on STATUS icon and press enter. here u maintain the credit amount allowed. but this is done by the Finance people.
5. Now when you create the sales order and if the amount exceeds the credit limit then u will get the message as you maintained in the TC OVAK. Normally the system starts doing credit checks from the second sales.
order.
What are the different types of credit checks?
By Sunilmadho
Credit Check can be :
1) Simple Credit Check
2) Automatic Credit Control
Automatic Credit Control can be at various levels :
1) Order
2) Delivery
3) Goods Issue
Automatic Credit Check is of many types :
1) Static
2) Dynamic
3) MaximumDocument Value
4) Maximum Open Items in percentage
5) Oldest Open Item in number of days
6) Crtitical fields change
7) Highest dunning level, etc.
You can create more.
Credit Check happens only in SD module, never in FI. Because the stage of the check is in the sales cycle, which exists in SD. FI guys will check the credit master sheets of the customer, the MIS, the analysis etc, review the credit limits of customers. But the check will happen only in SD, while creating order, delivery or doing the goods issue.
All business have their own credit management needs, SAP allows you to specify your own automatic credit checks based on a variety of criteria. You can also specify at which critical points in the sales and distribution cycle the system carries out these checks.
SM30 - Table/View
u2022     V_TVTW - Define Distribution Channel
u2022     V_TVTA_KKB - Assign sales area to credit control area
u2022     V_T014 - FI - Define Credit Control Area
u2022     T001CM - FI - Assign Permitted Credit Control Area to company code
OVXG - Set up Sales Areas
e.g. Sales Organization
                  Distribution Channel
                              Division
                  Distribution Channel
                              Division
FD32 - Customer Credit Management
OVAK - Define credit limit check by sales document type
u2022     Check Credit
o     A - Credit limit check and warning message
o     B - Credit limit check and error message (no sales order can be created)
o     C - Credit limit check and delivery block (block delivery if hit credit limit)
     Options B and C -> used for checking open order values (when you create/change the sales order)
o     D - Automatic credit control with open order values
     More control in transaction OVA8 - Automatic credit control
     You check for open orders and deliveries, or just open deliveries.
     or open order values with other options
u2022     Credit group
o     Allows you to combine different sales document types for the credit limit check
VKM1 - Blocked SD Documents - Finance have to released the delivery block
OVAD - Define credit limit check by delivery order
u2022     whether the automatic credit check occurs at the time of delivery creation and/or goods issue
OVA7 - Define credit limit check by item category
u2022     Set whether to include/exclude item category for credit limit check
OVA6 - Define credit group. You can groups together different business transactions which should be dealt with in the same manner with regard to the credit check.
You enter the credit groups when you configure the sales document types for credit management and define the (D - automatic credit check).
u2022     SAP default credit groups
o     01 - credit group for sales order
o     02 - credit group for delivery
o     03 - credit group for goods issue
OVA8 - Automatic credit control - Double click on the line items
You can have the followings credit limit check :-
u2022     Static
Depends on the customer total value of open orders, deliveries, billing documents and open items.
u2022     Open items
No of days open
Overdue open items checks is based on the ratio of open items that are overdue by a certain number of days.
Max open items %
The customer balance must not exceed a certain percentage.
u2022     Oldest open items
If you don't want to deliver to the customer at all when even only 1 invoice is overdue.
Tick the Check for Oldest Open Item and Set the field Days oldest item = 1.
Days oldest item
No of days allowed for overdue or payment terms.
Use of the credit check Oldest Open Item. If a user attempts to alter the order quantity of a released sales document
that was previously blocked, it would be reblocked again by the system. The system only reblocks the sales document if the new order quantity is above a certain % amount.
u2022     Released documents are still unchecked
The preset % is whatever you want to set it as when configuring your automatic credit processing. You enter a deviation % and number of days,eg, you can set it so that an order can be changed by up to 10% within 30 days of original order entry date without it going back on credit block.
u2022     Next Review Date
If a customer has a credit limit of 1000 USD, and you would like to restrict this credit limit only to be available in current month (say March). If the document day is in April then the credit limit is zero.
You can use the "NextReview date" and "Number of days" fields and combined it with the "Last int.review" field in customer credit master "Status" view (FD32).
VOKR - Display of work list for credit management (configure the display variant)
In credit mgmt how the Amount & limit can be can be configured at sales order,delivery & PGI Level.
Please give me the solution .
1)First create Credit control area
Path:IMG\ES\Definition\FA\Define Credit Control Area
2) Assign your credit control area to your company code
Path:IMG\ES\Assignment\FA\Assign Company code Credit Control Area
3) And enter the credit limit using above mentioned transaction code FD32.
4) And assign this credit control area in your customer master Sales Org Data (XD02)
5)if you have maintained the credit control area for your customer then goto T.Code FD32.
6)Enter your customer number and the credit control area.
7)Select the status tab.Press enter.
8)Maintain the credit limit in the field.Save.
9)Go to OVA8 T.Code and then click on open orde

Credit control on distribution channel wise

hello
can anyone tell me how to have credit control on distribution channel wise
i know sales area assignment to credit control area
but can we have a direct way of controlling credit can three be any way

Yes we can do by using Distribution channel..
Take 2 sales areas with different D.Channel assign those to 2 different credit control areas that configuration that u can do in enterprize structure -
assignment
HI,
sales & Distribution -
assign sales area to credit control area..
Now the assignment between Credit control area and company code, as per our SD concerned we can assign one credit control area to one company code i.e one to many relation ..
but internally u can assign one more credit control area i.e which is assigned to 2nd sales area to same company code. here it is in Financial accounting--- credit management there u can find search on that, there u can assign one more C.C.Area to C.Code....
From this way u can maintain creditlimit to the customer on basis of credit control area
In FD32 u r maintaining credit limit to the customer in the combination of credit control area..
i hope so this will help u so much, try it and let me know...
Credit groups are linked with sales document type sales document is linked with sales areas .,thats why distribution channels are linked to credit groups.
if it helps dont forget to reward me.
Regards,
kishore.

Credit control area to sales area

hi sd gurus
can we have credit control are setup to sales area,when it is already setup in company code,,,,..
thanks
regards
vivek

hi,
If we want to use more than one credit control area for same customer or one customer is dealing with more than one sales area and for each sales area u have to maintain different credit limits then wehave to use more than one credit control area for that customer then we assign sales area to that credit control areas.
transaction code for assigning the credit control area to the sales area is OVFL
pls reward points if the answer is helpful
Regards,
Murali

Multiple credit control areas for 1 company code

Hi experts,
My client is using ECC6 version and they activated credit control area, as I know that 1 company code can have 1 credit control area and 1 credit control can be assigned with multiple company codes,. but in one of my client company code is assigned to 4 credit control area through
u201CFinancial Accounting (New)- Accounts Receivable and Accounts Payable-Credit Management-Credit Control Account-Assign Permitted Credit Control Areas to Company Codeu201D-
Can anyone let me know how this functionality will work? Any additional impact will be there when compare to 1:1 scenario? And what are the details we need to update in FD32 when we assign multiple credit controls for 1 company code.
Regards
babu

Hi,
The multiple assignemnet of credit control allows you to use multiple credit control for customers. Thus in FD32 you can use these assigned different credit control area and maintain the credit limit for each area.
Regards
Milind Sonalkar

Credit Control area not filled in table KNVV

Hi everyone,
I am new to the forum and first and foremost want to thank the particpants here for their contributions, which have helped me a lot in the past.
I am facing a problem today and hope some of you could assist me with some hints on how to solve it. In the existing forum entries I could not find a solution.
I am working in a Rapid Deyployment Solution IS Retail ERP and am trying to have table field knvv-kkber filled (credit control area). Right now it remains empty, although customizing exists in a way that credit control area exists, it is assigned to company code and sales area. Customer also has a record in table knkk for the respective credit control area. Obviously field credit control area in tcode xd02 is not available and would also not be available for editing, even when screen tab customizing were changed. It is only shown in xd03. Also former key users working with a different IS Retail installation told me that they never keyed in credit control area in customer master tcodes xd*. So I am wondering right now, how system fills that field.
Thank you a lot for your help.
Regards
Christian

"""Just adding in Lakshmipathi's comment that if we maintain credit control area in KNVV-KKBER field and we have also assigned it in IMG with sales area system will give preference to KNVV-KKBER. If you have not assigned it customer master then system will determine it from customization.""""
Dear Moazzam, sorry--I need to differ with these statements.
Always System will gives the priority to sales area then only to customer.(in determining credit control area)
let me explain: If we take Credit control area determinations will follow the below procedure:
1.Through the exit(EXIT_SAPLMV45K_001)
2.Sales area(distribution channel)
3.Customer master
4.Company code
Note: For the first 3 situations,mandatorily- you need to assign your credit control area to your company code.(Deriving the Credit Control Area - Credit and Risk Management (SD-BF-CM) - SAP Library)
Dear Christain:
As you are aware, we can maintain credit control areas can differ for each sales area.
For example,same customer has been maintained with two different sales areas.
Customer X in sales Area 1000/10/00-can have credit control area A
Same customer in sales area 1000/20/00-can have credit control area B.
If business wants to maintain at customer master level--they can maintain( it is optional)
Otherwise simply they can assign for the sales area which will be defaulted into transaction level.
This is what is happening in your case.
Note: if you maintain assignments for your sales area--then this will be defaulted into KNVV-KKBER,even though you doesn't maintain manually in XD**/VD** Tcodes.
Hope this helps.
Phanikumar

Functional area and Credit Control area

HI
Dear Guru's
Kindly explain me the ,the differenec between Functional area and credit control
area, with examples.
with regards
Arun Kumar

Hi Arun Kumar,
Functional Area :
It organize your business for cost of sales accounting. It allow you to segregate and classify different types of costs within one expense account. For e.g. a single labour account to determine what amount of labour is spent directly on production as compare to sales or hr.
OKBD - Maintain Functional Area
Credit control area:
An organisational unit that represents an area responsible for granting and monitoring credit.
outstanding recievables can spoil the business process. to
control credit limits in sap system we can configure credit
control area.
one company code can hav one credit control area only
but one credit control area can hav many company codes
i.e. u can assign one credit control area to many company
codes.
the relationship is one to many.
Regards,
Haribabu

Hi Friends Can we Maintain Credit Control settings as per Profit Centre

Similar Messages

Maybe you are looking for