Hi friends: I Install Itunes ver 11.1.4 the lastest version of itunes and I have a Ipod 2nd generation and I can't sincronize it with itunes. I perform a test and the program can't connect with the ipod. What happens?? Can I restore old version of itunes?

Can I restore a previous version of itunes??

Try
iOS: Device not recognized in iTunes for Windows
I would start with              
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or              
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

Similar Messages

  • HT5085 Hi there,  i'm new to the iPHONE community and please can someone tell me how to backup my phone to iCLOUD. How do i connect with wi-fi. Must i buy a wi-fi connetion or what.Thank you kind regards

    Hi there,  i'm new to the iPHONE community and please can someone tell me how to backup my phone to iCLOUD. How do i connect with wi-fi. Must i buy a wi-fi connetion or what.Thank you kind regards

    Do you have a wi-fi network in your home ? If you do then you should be able to connect your phone to it via Settings > Wi-Fi on your phone - that should show any networks that are available, and tapping on the network that you want to use (and typing in its password if it's password protected) should connect the phone to it. If you don't have a wi-fi network then yes, you will need wifi router in your home, which is connected to the internet (e.g. via your phone line) to be able to back up your phone to iCloud.
    Connecting to wifi : http://support.apple.com/kb/HT5569 (the screenshots on that page are from iOS 7, but they should be similar on iOS 6)
    iCloud backup and storage overview : http://support.apple.com/kb/PH12519
    You can also backup your phone to your computer's iTunes : http://support.apple.com/kb/HT1766

  • HT201257 I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to

    I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to the store

    Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone.  Then you can look into Applications > Utilities >  Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    then go through the process of looking for the microphone again as the reset may reenable the mic.

  • I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

    I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please

    Hi Blueandpink,
    If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
    If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
    If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding  down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
    Hope this helps!
    ~Joe

  • TS3988 I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    I have set up all the iCloud on my iPad and iPhone both are the latest version but they don't seem to sinc with each other does this take some time? I am connected to the Internet via wifi do I need to turn the mobile data to on on both maybe??

    Welcome to the Apple Community.
    You need to turn the services you want to sync (calendars, contacts etc) on on both devices from settings > iCloud.

  • My iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my prob

    Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please

    Hey Kirby17,
    Thanks for using Apple Support Communities.
    If you are not getting any sound from the speaker, follow this article.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved, please contact Apple Support.
    Have a nice day,
    Mario

  • HT201274 i have ipod 2nd generation and i had reset   Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am co

    i have ipod 2nd generation 32 gb and i had reset >  Erase All Content and Settings it is longer than 3 hrs it is still showing apple logo and blink like if it will restart but again it shows the same logo!! is it all right with the erasing...??? i am confused!!

    For a 1G and 2G it can take hours. Make sure it is connected to a charging source otherwise the battery can fully drain before it is done. If still problem
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer          
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I was having issues with firefox so I upgraded to firefox 4. I am connected to the internet but when I open firefox or even internet explorer it says Unable to connect problem loading page. Nothing will pull up!!! No help link or anything!!?

    I was having issues with firefox so I upgraded to firefox 4. I am connected to the internet but when I open firefox or even internet explorer it says Unable to connect problem loading page. Nothing will pull up!!!

    I don't know if you are still having the issue but if you are have you contacted your ISP? It sounds to me like it's more of a connectivity issue than a browser problem. I've dealt with similar things several times and in both cases it was something with the modem or an ISP setting.
    I'm also wondering if it could be a Wi-Fi issue. Can you log in to your router? (It varies by brand but you would go to a site such as http://192.168.10.1. That is for Trendnet. The information for yours should be in the documentation that came with it.)
    You should be able to get the router log in page to come up even if you can't connect to any websites. (Provided the network is set up correctly.)
    I also would double check your connection settings (if you're connecting over Wi-Fi) or your ethernet connection. (If you're connected directly to the modem and router.)
    Hopefully one of these suggestions will be helpful.

  • I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly. Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again. Is there any solution?

    I have an iphone 3GS and I have upgraded it to iOS 6. Since then it doesn't work properly.
    Every now and then it has been restarting by itself and requiring restore. When I connect it to itunes it restarts again and again without letting me take any action. Is there any solution?

    Hey, There are afew things you can try.
    - Simply turn your phone off and back on again
    - Hold down your home button and your lock button and let goes as soon as the screen goes black (Phone will power down) - Then turn on your phone and hey presto!
    - Back up your iPhone to your PC, then restore it..
    this ones last cause I think you may have tried it already..
    - Close all open applications
    Hope this helps!
       Kieran.

  • I have a iPod 2nd generation and it will not charge or connect to itunes

    I have a iPod 2nd generation and it will not charge or connect to itunes, I have tried pressing the power button and home botton together and nothing happened.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Also:
    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.

  • I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

    I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

    Is this happing because the external is formatted to PC and not mac?
    Yes that is correct.
    Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
    If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
    You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
    Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
    regards

  • I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple s

    I have an IPod 2nd generation I bought from a pawn shop.  It worked for a day but now when I try to charge it, it keeps switching back and forth from the large full screen icon of a low battery and a lighting bolt below to the blue screen with the apple symbol in the middle.  I had it on charge all night but still dead.

    Try here.
    iPod touch: Hardware troubleshooting
    You may have a hardware problem.

  • Can't see the list of songs on my iPOD 2nd generation

    i have installed the ipod, and i am able to transfer my songs into my ipod 2nd generation, however i am not able to see the list of songs that i have put into the actual ipod shuffle. Can someone please help me !
    thanks

    no, there is contents. i just figured it out.
    to recap: i had 2 problems: one was that i couldn't see the contents of the shuffle. the other was that i couldn't eject my shuffle. when i tried to eject, i kept getting the message that i couldn't eject because an application was using the files on the ipod. when i clicked the icon of my shuffle i got the picture of the ipods with the heading "ipod + itunes," as i recall. there were no settings or content tabs.
    now i realize there were no tabs because i had not finished the registration of the shuffle on my pc. i had registered the shuffle on the website without using itunes. i didn't realize that there was more i needed to do in itunes because i couldn't see all of the buttons in my window. when i followed through with the registration in itunes all the way to the end, the 2 tabs were revealed and the songs that i had already loaded on the shuffle were listed in "contents." and, i was able to eject the shuffle. apparently itunes (or whatever) was still looking for a completed registration and wouldn't release the shuffle. sigh.
    if you can not see the settings and contents tabs in itunes when you click your shuffle in devices or you can not eject the shuffle, look at the window with the picture of the ipods in itunes. there is more below. complete the registration (i had already done so on the web earlier, but my itunes was not complete.).
    thanks to everyone for your help.
    power spec 8921 (pc)   Windows XP  
    power spec 8921 (pc)   Windows XP  

  • Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

    Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
    I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
    Thank you for your time.

    If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
    I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
    If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
    You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

  • My iPod 2nd Generation won't turn on and will not connect to any computer!

    A few months ago I woke up one morning and tried to turn on my iPod 2nd generation. It wouldn't, so I thought that maybe it was just out of battery. I plugged it into my computer but it would not connect and charge. I tried pluging it in to many other computers and none of them worked. (I tried MACs and PCs) When this happened my warranty was already up. Now my parents want to bring it in to see what is wrong, WHILE THERE IS NO WARRANTY!!!!!!! I told them that it was a waste of time and money because we would have to pay to see what was wrong. If there is something wrong that is easy to fix great!, but if there is something really wrong with it and it is crazy expensive to fix we just waisted time and money. If there is something wrong but there is no way of fixing it we also wasted time and money!! I have explained all of this to my parents but they won't listen!!! Is it worth it to get it checked out or should I just keep trying to explain to them that it's a waste of time and money????   Help!!  

    If your iPod is still charging if you plug it to the adapter, let it charge for about 10min, then connect to your computer in recovery mode, explained in this article:
    iOS: Unable to update or restore
    If it does not charge, you'll have to get it serviced.
    Apple can offer you a replacement device, but you'll have to pay for it:
    Check the pricing here:
    http://support.apple.com/kb/index?page=servicefaq&viewlocale=en_US&geo=United_St ates&product=ipod&select=REPAIR_PRICING

  • HT4623 The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The "Software Update" feature is not available in my Ipod 2nd Generation unit while the upgrade option in iTunes keeps on hanging while downloading the upgrade iOS (time out error). So, please tell me how I can upgrade the iOS.

    The Settings>General>Software Update comes with iOS 5. The 2G can only go to iOS 4.2.1
    Try disabling the computer's security software during the download and update.

Maybe you are looking for

  • I think i deleted photo booth and now i cant find it

    Ok so one day i was messing around with my computer and i pulled somethings out from the bar at the bottom of my screen (the bar with all the apllications on it), so i retrieved some of the other thigns that I pulled out of that bar, but I couldn't f

  • Compatibility with Windows Small Business Server

    I bought an iMac recently and it's a revelation. I have been getting p$%^&d off with my Sony Vaio + Windows 7 setup at our small business. All the usual rubbish, no need to list it. So I bought a 15" Mac Book Pro for work, with Office 2008 (I have th

  • Itunes wont download because Apple Mobile Support Device cannot be removed

    I had an older version of itunes but an update came up. It said in order to download the update i had to uninstall the older version of itunes. I did but once i tried to upload the newer version, the installer said it could not be installed because t

  • SMTP Relay denied

    Hi All, Im trying to setup mail on snow leopard server version 10.6.2 At the moment it is using IMAP and SMTP. From a users account i can send emails fine. However when trying to receive emails the sender receives the following error: Recipient addre

  • Adding a Device on virtual machine

    I recently purchased a Fujitsu ix500 scanner to use for the Mac and PC. I was able to install it for use on the Mac; however, I am having difficulty installing it on the virtual machine. How can I install it on the virtual machine ?