Hi Friends, it is regarding message folders.

Hi Friends, it is regarding message folders. I am not able to create a new folder in ‘Saved Items’. My mobile was formatted few months back & I am facing this problem since then. I was able to create folders in ‘Saved Messages’ before my phone was formatted. Does anybody have a solution.

Similar Messages

PC suite / message folders

OS winxp sp2
PC suite 6.81.13.0
connection IR
phone 6100
When opening messages on the phone ther is always a syncronise operation. Even when i delete messages, they are restored imediatly. When i do something else and return to the message folders, messages are again written to the phone. So after a few times, the phone memory becomes full.
Is there a way to inhibit that syncronisation so I can manualy copy the messages I like to keep to my PC ?
regards patrik

You can't stop the sync, it happens always as a kind of a refresh.
I always move the messages in PC (when phone is connected and I can see the inbox for example) to a special folder I have named "my old textmessages" and thus I still have all my old messages in PC, but the phone folders are not so full.

Regarding Messages to Job Log

Hi,
What is a Job Log.
i have to write messages to job log.
how to do this.
how can i see that messages whether it is written or not.
how it can be seen to the client/user.
regards,
kiran

Hi Kiran
Use 'write' to display the message in the job log.
write : / log_message.
Place this statement after the block of statements in your program where you want the message to be displayed in the log.
You can see the job log in SM37 transaction.
hope this helps you.
regards
Message was edited by:
Sarah Bollavaram
Message was edited by:
Sarah Bollavaram

Message folders split in 2 columns

Hi there,
I really need to be able to split my message folders column in 2 or 3, so I can see all the folders in one.
Does anyone found a way to do that?
Many thanks,
Em

Nope, no one knows that one.
Although thins add-on might help https://addons.mozilla.org/en-US/thunderbird/addon/quickfolders-tabbed-folders/?src=search

When I attach a JPG file in my email and send it to a Windows friend they get the message "The file type being saved or retrieved has been blocked when they try to open it." Anyone know why and how to fix this problem?

When I attach a JPG file in my email message and send it to a Windows friend they get the message "The file type being saved or retrieved has been blocked when they try to open it so that they can save it." Anyone know why and how to fix this problem?

Your Windows friend should ask in a Windows forum why his email client won't open attached jpg files. We have no idea what email client he is using or how his Windows security is configured.

I wonder if it is possible to hack the iphone. because a friend received a bad message me and I never send the messenger .. Is someone please help me understand?

I wonder if it is possible to hack the iphone? because a friend received a bad message me and i never send the messenger. is someone please help me

It wasn't your iPhone that was hacked, but your email account (or
messaging account) that was hacked. Immediately change all your
passwords for such accounts.

When my friend sends me a message, it takes longer for me to actually receive it. When I finally get it, my phone tells me I received it hours ago. What is my problem?

When my friend sends me a message, it takes longer for me to actually receive it. When I finally get it, my phone tells me I received it hours ago. What is my problem?

Welcome to the Apple Community.
Try restarting the phone and trying again.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.

E-Mail Message Folders

I have a Blackberry Curve 8310 through AT&T. I recently upgraded the software on the phone and Desktop Manager to 4.5. Currently I have an e-mail account at att.blackberry.net. I also have a personal google mail account that I setup on my Blackberry. Those accounts seem to be functioning correctly on my Blackberry. I have two work e-mail accounts that I want sent to my Blackberry. Currently I have those two work e-mail accounts setup to copy every inbound message to my att.blackberry.net account.
Preferably I would like to setup individual accounts (folders) on my Blackberry for the two work e-mail accounts while removing the copying to att.blackberry.net. I have tried doing this on AT&T's Blackberry Internet Service website, but they keep identifying the mail server as IMAP4 when it is POP3. I cannot change this setting.
The other option is to leave my Blackberry as it is with the copies sent to att.blackberry.net and create e-mail message folders to filter the work e-mail messages to. Supposedly there is a way to do this via Blackberry Desktop Manager, but I keep looking for the E-Mail Settings in that software and I do not have that option.
What are your recommendations about how to proceed?

You have in your device the icon to setup mail?, you can add the accounts from this icon.
If you don't have the icon call att customer service and ask for the setup mail icon in your device.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Regarding message error in bap webdynpro

hai friends
i am new to abap webdynpro
i have doubt that , i palced the table ui element in the view
if that table is not initial
i have to give error message,
is it same way as normal abap
in the view the ui element id name of table is TABLE1
can write this way
if table1 is not initial
then i will call the message method over here through wdcode wizarad
endif

Hi,
Check the example WDR_TEST_MSG_AREA .
1. Validate your data in seperate funtion module and update the message Id and number in internal table.
2. Use wizard to declate variable for massage area. It will create data declaration for messages of interface type IF_WD_MESSAGE_MANAGER. In this interface there is a method 'REPORT_T100_MESSAGE'. Pass your message ID and number in your internal table to this method parameter.
If u need more information about message handling, check the following URL
http://help.sap.com/saphelp_nw70/helpdata/en/d8/2a934259a5cb6ae10000000a155106/frameset.htm
Reward point if useful.
Regards,
karthick S

Regarding Message Pool In web Dynpro

Hi
I have created the InputForm application for error handling.... In that i have created the Message Pool. A class IMessage<ComponentName> has been genrated automatically. Inside this class whether i have to write the code for create CONSTANT keys or else it will automatically create ... Because i am not getting code inside... its generating empty class.....
like
public class IMessageSimpleErrorsForm{
but i have gone through one application which is already created and deployed.... In that I found the following class for creating CONSTANT keys
public interface IMessageSimpleErrors {
ErrorMessage <code>"Please enter a valid date for field {0}. You entered , which is a date in the future and therefore not a valid date of birth."</code> using
key "DateIsInFuture".
public static final IWDMessage DATE_IS_IN_FUTURE = new WDMessage( "com.sap.tc.webdynpro.tutorial.errorbehavior.IMessageSimpleErrors" , "DateIsInFuture", WDMessageType.ERROR);
Warning <code>"You did not enter an e-mail address. Therefore, you will not be informed about product news and special offers."</code> using
key "DesiredEMail".
public static final IWDMessage DESIRED_E_MAIL = new WDMessage( "com.sap.tc.webdynpro.tutorial.errorbehavior.IMessageSimpleErrors" , "DesiredEMail", WDMessageType.WARNING);
ErrorMessage <code>": Entry of a valid is required for proceeding with the requested service."</code> using
key "MissingInput".
public static final IWDMessage MISSING_INPUT = new WDMessage( "com.sap.tc.webdynpro.tutorial.errorbehavior.IMessageSimpleErrors" , "MissingInput", WDMessageType.ERROR);
please help me
Thanks & Reagards
Ravi Shankar B

Hi Ravi,
Pay attention that constant are generated only for messages types Standart, Warning and Error but not for Text.
Best regards, Maksim Rashchynski.

Using iCloud, how do i sync all email messages/folders etc

how can i sync all email messages and folders using the icloud service? i have updated and re-organized my email folders on my imac and i want them to sync with my iphone and ipad. all of my other things are syncing very well between the three devices but my mail messages are only suyncing between the ipad and iphone. i want to get my imac in the sync loop too.
any suggestions?
thanks,
james

i want to get my imac in the sync loop too.
James...
Is your Mac running v10.7.2 and has iCloud setup?
Apple - iCloud - Learn how to set up iCloud on all your devices

Trying to restore Mail messages & folders

Before doing a clean install of Leopard, I did a complete backup of my system. After restoring my data, I did not realize that I had a problem with Mail. Though many of my email messages are listed, I am missing all of the local sub-folders and their respective messages. I can see other local folders and read the messages, but the sub-folders are all missing. For example, I had a folder called "work" and other work-related folders within them. "Work" is still there, but not the others. Also, I had always kept a backup, local folder of my sent emails. While I can see this list of "sent" messages, I can no longer access any of them: when I attempt to open any local "sent" messages, the content is blank.
Here's the kicker: I've been using Mail a lot each day and am afraid that a fix might wipe out my newer messages. Can anyone offer any advice as to what files I need to restore from my external hard drive without erasing the newer emails?
Thank you very much for any help you can give me.

Hey, it really depends from what you upgraded from. Usually a mailbox rebuild is a simple way to restore everything that "appears" to be missing, but sometimes it can be more tricky.
Here is a link to a previous discussion on this forum that addresses these issues in much detail: http://discussions.apple.com/thread.jspa?messageID=5754646&#5754646
I hope this helps.

Few Queries regarding Message Size in XI

Hi ,
I have posted the same question before many times over but did not get a satisfactory reply.
I have many file to idoc scenarioes.
Now the file size is large .It is a CSV or a Tab-delimited file.
IT can grow upto 100 mb.
DEV has 4gb of RAM
QA and PRODUCTION have 16 GB of RAM
INTEL DUAL CORE PROCESSOR ON EACH box.
If I want to send a complete 60-100 mb file I run into "LOCK table overflow"
WE have increased the table size parameter on recieving CRM system.
recordset parameter is set for all interfaces from 500 to 5000.
Since I am not able to send a complete file I am breaking it into chunks and sending as I do not have much choice.
For certain interfaces where I am having large number of fields I am able to send only 2000 records per file for others about 14000 records per file.
In order to take care of errors like "LOCK table overflow " and to automate the process I have scheduled a report 'RSARFCEX".Otherwise I'll end up putting one file at a time and wait for it to get processed (i.e. create idocs with status 64 in the recieving system.) and this takes a long time.
I see here on sdn people are able to send a large file in one go.
Even if I try to split a file using xi ..multimapping..extended interface determination...the works et cetra ...It fails for a file of size 6mb.
That too after increasing the no. of work processes.
Besides tried to follow XI tunning parameters ...but there was no change in status-quo.Finally I am using an abap program in xi which is spillting the file (in a matter of few minutes) so that file adapter can pick it up .
I am surprised by xi system's performance .I am not using BPM .There is content conversion on sender side.
Would the experts on the forum please provide a solution.

Hi deepak
Did you check this weblog
/people/alessandro.guarneri/blog/2006/03/05/managing-bulky-flat-messages-with-sap-xi-tunneling-once-again--updated
and this related thread
XML file size
regards
krishna
Message was edited by:
Krishnamoorthy Ramakrishnan

How to send a message to a Facebook friend from shortcut of messages in notification center

i tried to send a message to a facebook friend from the shortcut of messages like facebook post or twitter tweat option in notification center but i couldn't i thought there may be something else which i need to do before sending a message to anyone from facebook is there something i need to get done before i can a message to a facebook friend ???

Hi,
I take it you have a Jabber account set up in Messages ?
A Google Mail ID can access Google talk which is a Jabber Server and if you have Enabled "Chat" at Facebook you will have a Facebook chat ID that can be used in Messages as they too run a Jabber server.
Of course these are just two of many Jabber and compatible XMPP servers.
I don't have Facebook or Twitter but I did use the Menu bar icon for Notifications and clicked Messages and Sent a Messages to one of my Jabber IDs (it logged me in and sent it from my Google one).
In the System Preferences > Notifications I do have Share Button set (Messages only).
9:04 pm Saturday; May 10, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Please help me regarding message error in GPShell 1.4.2

Hi friends..
i've a GPShell script like this :
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
select -AID a0000000030000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
delete -AID a00000006203010c0101
delete -AID a00000006203010c01
delete -AID a00000006203010c0101
install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
card_disconnect
release_contextI've got this message, when i tried to load .CAP file into Infineon Java Card 2.2.1, using that script..
C:\GPShell-1.4.2>GPShell helloInstall.txt
mode_211
enable_trace
establish_context
card_connect -readerNumber 2
* reader name OMNIKEY CardMan 5x21-CL 0
select -AID a0000000030000
Command --> 00A4040007A0000000030000
Wrapped command --> 00A4040007A0000000030000
Response <-- 6F108408A000000003000000A5049F6501FF9000
open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
Command --> 80CA006600
Wrapped command --> 80CA006600
Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
886FC6B03640B06092A864886FC6B040215650B06092B8510864864020102660C060A2B060104012
A026E01029000
Command --> 8050000008205277E9B29D125200
Wrapped command --> 8050000008205277E9B29D125200
Response <-- 0000715457173C2A8FC1FF020005BD1A6BE9D3D5CA5B9E40FE02CCC89000
Command --> 8482010010D1F2701CAF9446D519A038D76716189C
Wrapped command --> 8482010010D1F2701CAF9446D519A038D76716189C
Response <-- 9000
delete -AID a00000006203010c0101
Command --> 80E400800C4F0AA00000006203010C010100
Wrapped command --> 84E40080144F0AA00000006203010C01011D36CBB3988EDA8E00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID a00000006203010c01
Command --> 80E400800B4F09A00000006203010C0100
Wrapped command --> 84E40080134F09A00000006203010C0177FE477BAC9DC31100
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
delete -AID a00000006203010c0101
Command --> 80E400800C4F0AA00000006203010C010100
Wrapped command --> 84E40080144F0AA00000006203010C01014D90396A020CB8FE00
Response <-- 6A88
delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
install -file HelloWorld.cap -nvDataLimit 500 -instParam 00 -priv 2
file name HelloWorld.cap
Command --> 80E602001F09A00000006203010C0107A0000000030000000AEF08C60201A8C80201
F40000
Wrapped command --> 84E602002709A00000006203010C0107A0000000030000000AEF08C60201
A8C80201F4009F5FC8A422FC295C00
Response <-- 6985
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of
use not satisfied.)There's message error :
install_for_load() returns 0x80206985 (6985: Command not allowed - Conditions of use not satisfied.)
I've tried to use another Infineon Java Card 2.2.1, but the result is always same..
Please help me
Thanks in advance..

hi ,
ther is not syntax with clear with 'X".
but you can do one thing to get the one character.
REPORT ZMKTEST6.
data : f1(2) type c,
f2(2) type c,
f3(10) type n value '12345'.
clear: f1 with 'X', "Comment this
f1 = f1+0(1). "write this
f2 with f1,
f3 with '3'.
write :/ f1 ,f2, f3.
now f1 containd one charater instead of 2.
now you can display as usuall

Hi Friends, it is regarding message folders.

Similar Messages

Maybe you are looking for