Hi Gurus Kindly suggest me reg my Masters SAP Project
Hi all,
i am Nikhil trying to do a project in sap at masters level , i have not decided on the project can any one suggest me a good one ,
i am planning either creating a business scenario for xyz company (SD )
or installation sap IDES environment (Basis Project)
Kindly suggest me guru's.
Regards
Nikhil.C.Nelluri
[email protected]
Hi Varma,
The module which I am talking about is a project management tool which is very much required for managing the projects,it may be a product development project, infrastructure project or any other project..
Normally this is handled by project management office(PMO) where they plan the project i.e. list all activities that are required to complete a project. It may be land acquiring, material procurement, sub-contracting through orders, billing etc...All these activities are planned in this project management tool (This planning requires enormous amount of field/site knowledge) and these activities are monitored & closed.
This module covers almost all process and integrates with almost all SAP modules like finance & controlling, materials management, production planning etc.
If you are interested in planning activities, then you can think of it. Otherwise choose your own interest area.
Regards,
Ravi
Similar Messages
-
Hi Guru's,
i am Nikhil and i am planning to do my final project in SAP.
i need some valuable suggestions for me to choose a project .
i am planning either
Creating Business scenario for xyz corp(SAP SD)
or
Implementation of IDES (Basis Project)
Guru's i need your suggestions so what i can do in a master level....
please suggest me and mail me some proposals if you can .
Regards
Nikhil.C.Nelluri
[email protected]Hi,
I think literally there is no comparison between SAP PS and Primavera.
Since SAP PS part of mySAP ERP, you will be able to bring together the triple constraints, such as time, cost and resource on a real time basis, which is not possible in other project management tool.
Controlling of Project Management from the financial point is only possible through ERP. especially budget control.
Monitoring the real time data also possible through SAP PS.
Major advantage with SAP PS is integration with other modules.
Hope it gives some idea to you.
Tnx.
Abdul -
Kindly Suggest About my roles in SAP IS-Retail
Hi ,
I am new to SAP IS-Retail. Within a week i am going to be deployed in client place . I have taken Basic training in SAP IS-Retail.
Please guide me on the roles and responsibilities like UAT, Key users training,Preparation of Functional Spec,Documentation.
Please help me.
Thanks in advance.
Cheers,
MuralidharHi,
Please check below link. hope it helps you to answer your question
http://wiki.sdn.sap.com/wiki/display/Retail/SAPRetailPOS+Interface -
...Problem of taking backups.. Need your kind Suggestions....
HI..
well i have a strange requirement and thus i want that you people, specially gurus kindly suggest an optimum solution. i will be thankful...
I have a Form which gives the summary of the current record state of the Database
For. e.g i have display items. that shows count of ..
Total number of teachers in shool, total male , total female,
teacher resigns, teachers hired, teachers on holiday etc..
The Form serves as a Summary Sheet for the higher management.
Now the thing is that higher management wants me to take the backup of this report.
so that if they want they can compare it . with the yesterday or with any date , the status ... summar.
i am taking logs for each table, but they dont want that it is better if we can take logs of the summary report..
I think we cannot user oracle workhistory for this purpose.. because then i would be needing to store the report in a table.. wastage n burden on database.. isnt it ..
IS it possible that i can take that report summary as export in excel file or any other file... through forms.. l, so that they can or i can store the daily stats..
which can be shown on request..
what to do i do not understand.. probably..
i mean obviously if i were to take backup of each and every thing .. it required huge burden and space..
obviously i cannot take export of DB as logical backup and import because then the current state of DB would be effected..
what to do kindly suggest some good solution , with the help of ur experience..Hi,
You can use OLE for storing the records in excel file. Searching this forum on OLE will give you more details on how to achieve this and may be some samples too.
HTH.
Regards,
Arun -
i am new in using Mac operating system, kindly suggest ebooks, videos or audio books to me so that i can learn more about it.
any kind of help would be appriciated. i am very eager to learn.how to make ios application? and how to effectively use terminal? where does the basic programming start in Mac? what are the different tools that can help me make an Mac application and ios application.
-Thank you
Shailendra (India)Apple has got some great guides to start developing in Objective-C, used for programming OS X and iOS apps > http://developer.apple.com/library/mac/#referencelibrary/GettingStarted/RoadMapO SX/chapters/01_Introduction.html
-
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest
It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
If that is the case, it is nowpermanently bricked. -
In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .
Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish -
Kindly suggest oracle automation testing tools supporting oracle 10g forms
Hi,
We would like to automate oracle 10g forms in our company. kindly suggest oracle automation tools supporting oracle 10g forms other than OATS.
If only OATS tool is available in Oracle, please suggest user guide for OATS.
Regards,
SairamHi Sairam,
You can find OATS docs in OATS installation package itself. You can find separate pdf files for each OATS product(OpenScript Programmer Preference, OFT, OLT, OTM, Administrator etc).
Regards,
Deepu M -
Hi , I suhail khan from india and i am user of iMac system 10,1.These days i am facing the sound enabling issue with my iMac system I am not able to hear sound in my iMac system.So kindly suggest me how to enable sound in my iMac . Please no the needful.
Take each of the following steps that you haven't already tried.
1. If you've recently plugged anything into the audio-out (headphone) port, plug and unplug it a couple of times.
2. From the menu bar, select
▹ System Preferences ▹ Sound ▹ Output
Check the settings. The internal speakers should be selected as the output device, the Mute box should not be checked, and the volume slider should be at least halfway to the right.
3. Look inside the headphone port. If a red light is coming from the port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a headphone mini-stereo jack of the proper size.Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
4. Boot in safe mode by holding down the shift key at the startup chime. It will take much longer than usual. You don't have to log in; just reboot as usual (without holding any keys) when the login screen appears. (Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.)
5. Reset the NVRAM.
6. Reset the SMC.
7. Reinstall OS X after backing up all data as a precaution. You won't need your backup unless something goes wrong.
8. Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the recovery partition, if present.
*An SSD doesn't need to be zeroed. -
i am unable to configure my ipad 2 with my existing wifi of linksys though I have entered the all ip address as per my laptop but still I am not getting thru network kindly suggest the solution
The ip-adress cannot be the same as your laptop. You have to make sure that your ip-adress is unique in the network. if your ip is 192.168.1.100 try 192.168.1.112 or somthing. More advanced is to check avalible adress in your router.
-
I am handling logistics department in a company, i am handling more than 100 calls in a day. But my iPhone 4 have only 100 number call history. How to increase my call log size or kindly suggest a better app for storing 1 month call history..
Here's one:
https://itunes.apple.com/us/app/callog/id327883585?mt=8 -
I am using 4K Footages for editing in Premiere pro CC 2014, but its getting crash in between at every 15 to 20 mins. Kindly suggest how can it be solved, does any plugins or settings needed to edit 4K footages? Also would like to mention that footages frame rates are 29.97 and i have set timeline to 25 FPS is requirement by client. kindly revert. Thanks
Thanks Richarad ..It has solved the problem but still crashes some times .As the programme has the break (bumper)after every five minutes ,i hope it will not compress bumper time too after export.
-
Barcode Printing from EP --using barcode4J (Gurus kindly help me)
Dear Experts,
Barcode Printing from EP --using barcode4J
we want to print employee number as barcode in EP(version 6.4 SP 19).
we tested the barcode creation a standalone class, it works fine
Sample Code as follows
================================
Code128Bean bean = new Code128Bean();
final int dpi = 150;
//Configure the barcode generator
bean.setModuleWidth(UnitConv.in2mm(1.0f / dpi)); //makes the narrow bar
//width exactly one pixel
bean.setWideFactor(3);
bean.doQuietZone(false);
//Open output file
File outputFile = new File("out.jpg");
OutputStream out = new FileOutputStream(outputFile);
try {
//Set up the canvas provider for monochrome JPEG output
BitmapCanvasProvider canvas = new BitmapCanvasProvider(
out, "image/jpeg", dpi, BufferedImage.TYPE_BYTE_INDEXED, false);
//BarcodeServlet.
//Generate the barcode
bean.generateBarcode(canvas, "Z454544");
//Signal end of generation
canvas.finish();
} finally {
out.close();
<b>But the same code i put in wdDoModifyView() or wdDoInit() it throws class not found exception</b>. I have checked that barcode4j.jar and all relevant files are in classpath.
Any help will be rewarded.
Thanks
Aby.Re: Barcode Printing from EP --using barcode4J (Gurus kindly help me)
Posted: Aug 24, 2007 5:21 AM in response to: Ashutosh Moharir Reply E-mail this post
Dear Ashutosh,
<b> It is working now! .... :-D
Can someone provide me with a more detailed answer
Or Best Practices (step by step) ,that would be Great . </b>
I deeply appreciate your Quick & valuable advice;
and shall create a new posting if any further need arises
Many Thanks,
Aby Jacob
========= -
i updated my iphone 3g to ios4.2.1 ... the update was succesful but nw itunes says that sim card inserted in this phone is not acceptable and also states that on;y compatible sim from supported carrier is acceptable !!! kindly suggest ...
horsie10 wrote:
i bought my iphone in USA and im using it in india .... kindly hellp me how can i resolve this problem !!!
It has NEVER been possible to purchase an unlocked iPhone 3G in the US. Your phone was hacked. Updating it has re-locked it to AT&T. AT&T will NOT unlock iPhones for any reason.
The phone is now useless to you. There is no legitimate way to fix this. Buy a new phone. Preferably in India. -
Im looking evaulation hardware to get trained in interfacing with labview. kindly suggest
Im looking for any Hardware (NI or third party Hardware) in which i can get trained with interfacing with hardware with different communication techniques like Can, I2c, as well 232 and 485.. and Few DAQ interface... So kindly let me know any such hardware from any vendor is available.. Kindly suggest.
The best place to start would probably be the NI LabVIEW Basics 1 & 2 courses. They cover some of these concepts. You can find out more at http://www.ni.com/training. Other wise if you search the knowledge base on the NI Developer Zone you can find tutorials for lots of hardware bus interfaces, like this one on the CAN bus.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!
Maybe you are looking for
-
Downloading the internal table with header to FTP folder
Hi All, I have one requirement in downloading the internal table details with the fixed header line to FTP folder. The header line having the fixed text of 425 characters length. Note: We are not suppose to use WS_DOWNLOAD and GUI_DOWNLOAD function m
-
Hi masters, i have a big trouble..i am run the following code....o got some exception.....can u help me .... private static void obtainAdminObjects( Object[] outArray ) { try { if( useJNDI ) { // Set up JNDI environment parameters InitialContext cont
-
Putting iTunes list from G5 to a Windows Vista computer
My son has recently purchased a new windows computer ( his problem , and mine now too I guess ) and he wants to transfer all his music from the G5 to it. He has it all on a backed up on a Lacie hard drive that has Firewire, but the new windows comput
-
Is there a way i can burn a dvd to my macbook, then edit sections of that dvd and re-burn those sections i edited to a new dvd?
-
PSE 8 Hilfe in Menueleiste ist nicht benutzbar
Wenn ich in Photoshop Elements 8 die Hilfe verwenden möchte, um etwas zu erfragen, so stürzt das Programm immer ab. Sonst scheint das PSE 8, gekauft am 1.2.2010, zu funktionieren. Wie kann ich das beheben? Habe mit Neuinstallieren versucht, bringt