Hi Gurus, message star throw a http request as a trigger
Hi Gurus,
we want config a scenario where we get a http request as a trigger for start a message with JDBC-channel.
We have to select data from 5 tables with the value from the request and than transform this in a IDOC-Type and the receiver from the idoc is BI.
Have anybody an example for this scenario?
Thanks for your help.
best regards Michael
Edited by: Michael Kappe on Oct 9, 2008 10:37 AM
Hi,
I think need BPM for your scenario, according to ur requirement whenever got http request need to take data from tables and pass to IDOC.
i.e
HTTP-->JDFC--
IDOC
.................................Data Base TAbles
Similar Messages
-
Going through messages in PI using http requests
Hi,
I'm researching for an external tool that will handle PI channels.
I'm aware of the stop, start and status actions that can be used in an http request.
But what if I want more detailed information?
For example, if a channel is in status error, is there an http request to get details about the error?
What about messages? Is there a request I can use to find out what messages came through the channel?
So what else can I get using http requests besides the basic 3 actions?
What about RFC calls? Can they be used to get more information on channels/errors/messages?
Someone has a guide, about the http calls/RFC that can be used.
Thanks!Thing is that one of the requirements is to limit the need to go to SAP and check the errors.
Also, there is a need to watch for certain message, not necessarily if only error occurred and trigger stuff in my application.
The tool I'm working on is an enterprise one that also interacts with other applications in the organization, so if I want to create dependencies between different applications covered in my tool I need to get more information than just the status of the channel.
So, I hope for some additional http calls to get more information, but if there are none, then I'll have to do with what we have -
I have used php to write a socket server(text chat server),
then I use xmlsocket to write a client, I put this swf file in my html page, erverything of this client swf were ok: ervery clients could send or receive messages, but the other http request in this html page was unable to send(or receive) data from webserver,
webserver and chat server were on the same server,
and I have tried to use socket to instead if xmlsocket in my flash, but the new swf can only work in flash cs3, but it couldn't work in html page as the chat server can't send the security xml file to this swf, and I have also use Security.loadPolicyFile("http://192.168.139.128/crossdomain.xml"); to load security file, but it took none effect.
Is there anyone can suggest me ?
That's very kind of you!Hi Franco,
Yes, I solved that by reinstalling Java 6 Update 21.
There are three versions for Solaris namely, SPARC, x64 and x86. Our platform is SPARC and I think System admin has installed the wrong version instead of installing SPARC version of Java.
After installing SPARC version of Java this got resolved. And I confirmed everything is fine by running a small program as below. You can run this program from command line using the -d64 flag. If the installation is wrong you will get the same exception as I mentioned.
public class Analyzer {
public static void main(String args[]) throws Exception{
InputStream fin = new FileInputStream(args[0]);
int iSize = fin.available();
byte mvIn[] = new byte[iSize];
fin.read(mvIn,0,iSize);
fin.close();
String strText = new String(mvIn);
PrintStream fout = new PrintStream(new FileOutputStream(args[0]+".csv"));
fout.println("Before,After,Seconds");
Pattern p = Pattern.compile("\\[(?:Full |)GC (\\d*)K->(\\d*)K\\(\\d*K\\), ([\\d.]*) secs\\]");
Matcher m = p.matcher(strText);
while(m.find()){
fout.println(m.group(1)+ "," + m.group(2) + "," + m.group(3));
fout.close();
}Hope this helps.
Regards,
Prabhu -
Apex_web_service.make_request throws ORA-29273: HTTP request failed. How to get the soap fault XML?
I am trying to call a web service using apex_web_service.make_request function.
It works fine when all the parameters are correct. However, when something is wrong in the request XML, it throws an exception instead of returning the soap:fault message:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1369
ORA-29269: HTTP server error 500 - Internal Server Error
ORA-06512: at "APEX_040200.WWV_FLOW_WEBSERVICES_API", line 130
ORA-06512: at line 37
I need to get back the soap:fault and parse it to display a proper error message to the users (e.g. what was wrong with the input), yet the call throws an exception instead of returning it.
I am trying the exact same request from soapUI and it returns me the soap:fault below:
<soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope">
<soap:Body>
<soap:Fault>
<soap:Code>
<soap:Value>soap:Receiver</soap:Value>
</soap:Code>
<soap:Reason>
<soap:Text xml:lang="en">Fault occurred while processing.</soap:Text>
</soap:Reason>
<soap:Detail>
<ns1:RegisterFault xmlns:ns1="http://www.exchangenetwork.net/wsdl/register/1">
<description xmlns:ns2="http://www.exchangenetwork.net/wsdl/register/1">The security token has expired.</description>
<errorCode xsi:type="ns2:RegisterErrorCode" xmlns:ns2="http://www.exchangenetwork.net/wsdl/register/1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">E_TokenExpired</errorCode>
</ns1:RegisterFault>
</soap:Detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>
How do I get this back from APEX?
Thanks!Hi,
I've just run into this.
If the webservice returns a fault, such as:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"><soap:Body><soap:Fault><faultcode>soap:Server</faultcode><faultstring>INVALID_REQUESTER_INFO</faultstring></soap:Fault></soap:Body></soap:Envelope>
then the user gets presented with an unfriendly error message and there's no chance to output a more friendly one.
The response above is seen when testing the webservice, when run from the Form/Report page, we get something like:
soap:ServerINVALID_REQUESTER_INFO
Contact your application administrator.
OK
When OK button is clicked everything is rolled back and we don't even get the fault XML.
It would be good if Apex could be optionally set to not give the unfriendly messages, so that we could code such a message ourselves.
Unless anybody has a workaround for this, I guess that I'll have to see if I can code this in PLSQL.
Regards,
Chris -
HTTP request failed. Error code: "500". Error message
Hi ,
When we are trying to test webservices (exposed webservice in PI) scenarios in PI box we are getting error related Adapter framework service
HTTP request failed. Error code: "500". Error message: "Internal Server Error [http://xxxx:xxxx/AdapterFramework/rtc]"
in the RWB it is showing that
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessagingException: XIAdapterFramework:GENERAL:com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message 01d76ce0-972e-11e0-c652-b25394b91e0c(INBOUND) expired
Can any body help .
Edited by: subhaniABAP on Jun 15, 2011 11:30 AMHi,
If you want to resolve this error when dealing with the messages, please try the cache refresh with the link:
http://host:j2eeport/CPACache/refresh?mode=full
And also go thorugh:
- In Integration Repository/Directory go to menu Environment ->
Clear SLD Data Cache
- In R/3 go to transaction SXI_CACHE -> menu XI Runtime Cache -> Start
Complete Cache Refresh
MESSAGE EXPIRED:
Increase the value of the timeout parameter 'xiadapter.inbound.timeout.default' under Services -> 'XPI Adapter:XI'
to a higher value say '600000'.
Regards,
Caio Cagnani -
Air application throws security alert every time 'HTTPS' request made to server.
Have a look at the following screenshot.
On click of next button, application internally sends an https request. Appliction throws Security Alert dialog. The text can also be seen clearly.
Strange thing about this alert dialog is that, it appears every time when application send a request in given session.
If I run the same thing in flex (i.e. in browser), it asks for SSL handshake and that is also only once. So why it is happening here in case of Air.
Regards,
Prithvee Zankat.Back up all data. From the Safari menu bar, select
Safari ▹ Reset Safari...
Check these boxes:
Clear history
Remove all website data
Uncheck all other boxes. Press return. Test.
If Safari crashes immediately on launch and you can't do as above, hold down the shift key and launch it by clicking its icon in the Dock, then try. Failing that, ask for guidance. -
How to monitor BPEL process..? i want to see HTTP request message..
Hi all,
Is there any way to monitor BPEL process. In Jdev there is tool call
HTTP analyzer but it only monitors process which are invoked from Jdev.
Like Java webservices can monitored via that tool. But i want to monitor BPEL
process. I want to see Http request message. It that possible.?
thanks a lot.
/mishitAny requests you want to monitor should be routed through obtunnel. So the webservice that calls your bpel process should use the url of the machine where obtunnel is located, and obtunnel should be configured with the details of the machine where the bpel process is located.
also, you may find this thread of interest How to capture SOAP message using TCP Monitor in JDev? -
Problem in HTTP Request HTTP_RESP_STATUS_CODE_NOT_OK
Hai Gurus,
I am sending request from HTTP --> XI --> ABAP Proxy (Inbound). Its working fine when i execute proxy manually in tcode "sproxy". When do the same with HTTP Client it is throwing the following error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3 />
<SAP:P4 />
My proxy does the work of uploading the files to Document Storage System KPro using standard BAPI's. I have used SAPFTP and SAPHTTP dlls in client machine's system32 folder (Which will help in downloading the document from client windows OS machine to SAP GUI AIX based machine).
Still facing the same problem which will throw error HTTP_RESP_STATUS_CODE_NOT_OK with error code 500.
Any help is highly appreciated.
Regards,
Pushparaju Bollapalli.Also Check these Foloowing ;
- URL for the receiver is like this:
http://<host>:<port>/sap/xi/engine?type=receiver .The XI 2.0 differs from XI 3.0 in this.
-path in the receiver communication channel
The path has to be defined as:
/sap/xi/engine?type=entry for XI 3.0
/sap/xi/engine?type=receiver for XI 2.0
Regards
Aashish Sinha
PS : Reward points if Helpful -
MII 14.0 SP5 - 500 Internal Server Error is returned for HTTP request - XMIIVirtual Illuminator
Hello All,
I appreciate your help with the issue.
We are connecting from MII 12.1 to MII 14.0 SP5 Patch 3 on our local MII server using virtual connectors. We appreciate your help on it.
This issue is happening for MII 14.0 SP5 Patch 3 on our local MII server
As per the logs, accessing http://server:port/XMIIVirtual/Illuminator gives 500 Internal Server Error
500 Internal Server Error is returned for HTTP request [http://server:port/XMIIVirtual/Illuminator]:
component [VirtualProxyConnector],
web module [XMIIVirtual],
application [sap.com/xapps~xmii~ear],
DC name [sap.com/xapps~xmii~ear],
CSN component[],
problem categorization [com.sap.ASJ.web.000137],
internal categorization [-944271956].
[EXCEPTION]
java.io.IOException: Stream closed.
at java.net.PlainSocketImpl.available(PlainSocketImpl.java:483)
at java.net.SocketInputStream.available(SocketInputStream.java:217)
at java.io.BufferedInputStream.read(BufferedInputStream.java:325)
at com.sap.engine.httpdsrclient.io.ServerInputStreamWrapper.read(ServerInputStreamWrapper.java:49)
at java.io.DataInputStream.read(DataInputStream.java:83)
at com.sap.servlet.VirtualProxyConnector.service(VirtualProxyConnector.java:110)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:202)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:103)
at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:126)
at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:79)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:441)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:210)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:441)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:430)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:81)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:278)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.SessionSizeFilter.process(SessionSizeFilter.java:26)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:57)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:43)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:475)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:269)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Thanks,
Kiran
Message was edited by: Kiran SakhardandeHello Julian
This is a known problem.
Cause
- A user may have been added to a group in another ldap tree with a name, that is already existing.
- When DTR retrieves the group from UME, we get 2 similar group names, but the groups may be different.
- DTR cannot handle this and throws "Internal Server error"
Resolution
If you change parameter "ume.ldap.unigue_grup_attribute" to 'uid', DTR doesn't use the groupname,
but the group-uid, therefore the group is unique.
1. open Visual Administrator
2. choose Services
3. choose UME Provider
4. Reset "ume.ldap.unigue_grup_attribute" with 'uid'
5. restart the system
Thanks
Kenny. -
DTRServlet - 500 Internal Server Error is returned for HTTP request
Hi everybody,
I've got a Problem with my DTR.
Recently we've set up the new CE 7.2 System.
The DTR has run until about 3 hours ago.
I don't know what I've done that this error occurs, but I'm nearly shure that I haven't done anything that depends on the dtr.
I went through the set up wizzard of "Connect Design Time for Visual Composer with NWDI" again, but nothing changed.
Can you please help me with this issue?!
Thank you and best regards
julian
This is the text from the application log:
#2.0 #2010 08 20 15:02:47:398#+0200#Info#/Applications/DTR/Lifecycle#
lifecycle.startApplicationInitialisation#BC-CTS-DTR-SRV#sap.com/tcdtrenterpriseapp#005056BA56AE050000000000000010D8#1694250000000004#sap.com/tcdtrenter
priseapp#com.tssap.dtr.server.servlet.WebdavServlet#Guest#0##F30581C3AC5A11DFCAED00000019DA2A#f30581c3ac5
a11dfcaed00000019da2a#f30581c3ac5a11dfcaed00000019da2a#0#Thread[HTTP Worker [@1902689675],5,Dedicated_Application_Thread]#Plain#com.tssap.dtr.server.deltav.resources.log_messages#
Starting initialisation of DTR application.#
#2.0 #2010 08 20 15:02:47:405#+0200#Fatal#/Applications/DTR/Lifecycle#
com.sap.DI.dtr.090009#BC-CTS-DTR-SRV#sap.com/tcdtrenterpriseapp#005056BA56AE050000000001000010D8#1694250000000004#sap.com/tcdtrente
rpriseapp#com.tssap.dtr.server.servlet.WebdavServlet#Guest#0##F30581C3AC5A11DFCAED00000019DA2A#f30581c3ac5
a11dfcaed00000019da2a#f30581c3ac5a11dfcaed00000019da2a#0#Thread[HTTP Worker [@1902689675],5,Dedicated_Application_Thread]#Plain#com.tssap.dtr.server.deltav.resources.log_messages#
Initialisation of DTR application failed. Please refer to SAP note 774339 for more details on how to analyze the error condition.#
And this is the message from the Default Trace: (not all, that didn't fit in this thread)
#2.0 #2010 08 20 15:13:49:744#+0200#Error#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#
com.sap.ASJ.web.000137#BC-CTS-DTR-SRV#sap.com/tcdtrenterpriseapp#005056BA56AE05D600000002000010D8#1694250000000004#sap.com/tcdtrent
erpriseapp#com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl#Guest#0##7F3F3C0AAC5A11DF869E00000019D
A2A#7db05704ac5c11dfa28500000019da2a#7db05704ac5c11dfa28500000019da2a#0#Thread[HTTP Worker [@236433360],5,Dedicated_Application_Thread]#Plain##
Cannot process an HTTP request to servlet [DTRServlet] in [dtr] web application.
[EXCEPTION]
javax.servlet.ServletException: WebdavServlet.init() failed : com.tssap.dtr.pvc.basics.cluster.TaskFailedException: Connection is invalid.
at com.tssap.dtr.server.servlet.WebdavServlet.init(WebdavServlet.java:471)
at javax.servlet.GenericServlet.init(GenericServlet.java:270)
at com.sap.engine.services.servlets_jsp.server.application.WebComponents.getServlet(WebComponents.java:864)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:326)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:203)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:438)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:427)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:447)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:264)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:328)
Caused by: com.tssap.dtr.pvc.basics.cluster.TaskFailedException: Connection is invalid.
at com.tssap.dtr.pvc.basics.cluster.ClusterExclusiveTaskRunner.start(ClusterExclusiveTaskRunner.java:54)
at com.tssap.dtr.server.deltav.impl.Repository.initialize(Repository.java:643)
at com.tssap.dtr.server.deltav.impl.Repository.initialize(Repository.java:613)
at com.tssap.dtr.server.servlet.WebdavServlet.initializeDeltaV(WebdavServlet.java:556)
at com.tssap.dtr.server.servlet.WebdavServlet.init(WebdavServlet.java:462)
... 36 more
Caused by: com.tssap.dtr.pvc.util.sql.SQLRuntimeException: Connection is invalid.
at com.tssap.dtr.pvc.util.sql.GenericStatementProvider.prepareStatement(GenericStatementProvider.java:75)
at com.tssap.dtr.pvc.util.sql.GenericStatementProvider._getPreparedStatement(GenericStatementProvider.java:62)
at com.tssap.dtr.pvc.util.sql.GenericStatementProvider.getPreparedStatement(GenericStatementProvider.java:44)
at com.tssap.dtr.pvc.basics.persistence.PersistentClass.getPreparedStatement(PersistentClass.java:148)
at com.tssap.dtr.pvc.repository.TaggedValuePersistentClass.loadTaggedValue(TaggedValuePersistentClass.java:113)
at com.tssap.dtr.pvc.repository.TaggedValueTransientClass.loadTaggedValue(TaggedValueTransientClass.java:51)
at com.tssap.dtr.pvc.repository.RepositoryManager._checkDbInitialization(RepositoryManager.java:288)
at com.tssap.dtr.pvc.repository.RepositoryManager.isDbInitialized(RepositoryManager.java:1128)
at com.tssap.dtr.server.deltav.impl.Repository.initializeDeltaV(Repository.java:558)
at com.tssap.dtr.server.deltav.impl.Repository$1.run(Repository.java:645)
at com.tssap.dtr.pvc.basics.cluster.ClusterExclusiveTaskRunner.startTask(ClusterExclusiveTaskRunner.java:65)
at com.tssap.dtr.pvc.basics.cluster.ClusterExclusiveTaskRunner.start(ClusterExclusiveTaskRunner.java:51)
... 40 more
Caused by: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
at com.sap.engine.services.dbpool.cci.ConnectionHandle.checkIfInvalid(ConnectionHandle.java:652)
at com.sap.engine.services.dbpool.cci.ConnectionHandle.checkIfValid(ConnectionHandle.java:639)
at com.sap.engine.services.dbpool.cci.ConnectionHandle.prepareStatement(ConnectionHandle.java:113)
at com.tssap.dtr.pvc.basics.transaction.SharedConnection.prepareStatement(SharedConnection.java:131)
at com.tssap.dtr.pvc.util.sql.GenericStatementProvider.prepareStatement(GenericStatementProvider.java:73)
... 51 moreHello Julian
This is a known problem.
Cause
- A user may have been added to a group in another ldap tree with a name, that is already existing.
- When DTR retrieves the group from UME, we get 2 similar group names, but the groups may be different.
- DTR cannot handle this and throws "Internal Server error"
Resolution
If you change parameter "ume.ldap.unigue_grup_attribute" to 'uid', DTR doesn't use the groupname,
but the group-uid, therefore the group is unique.
1. open Visual Administrator
2. choose Services
3. choose UME Provider
4. Reset "ume.ldap.unigue_grup_attribute" with 'uid'
5. restart the system
Thanks
Kenny. -
Empty HTTP request received in SAP RFC test connection type G
Hi all,
While checking the RFC connection i am getting error,
response_line HTTP/1.0 500 Empty HTTP request received
server_protocol HTTP/1.0
status_code 500
status_reason Empty HTTP request received
Please let me know if this is right.Hi,
We are trying to connect to an external server. So, we are using Connection Type as G.
RFC connection Test status is 500.
But in our case, Idoc is getting generated but it is in the XI Box, throwing the below error,
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Adapter
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="SECURITY">SECURITY_VERIFY_ERROR</SAP:Code>
<SAP:P1>Check Signature</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Signature error Error while valdiating the digital signature. Theerror was com.sap.security.core.ws.wss.NoSecurityHeaderException No wsse:Security header has been defined for role soap:finalActor. Please verify the</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during message security handling in inbound channel: Security profile 'Check Signature'</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Since the RFC is working now, we were not able to find what is the issue. Even SSL certificates are valid. -
Problem in sending HTTP request to the server.
Hi,
i dveloped an ant script for sar deployment.
i deployed a sar to my local soa server with ant script. it got deployed succesfully..
but when i try to deploy to a remote server, getting the below error..
"Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404"
but the server is up and runnig and i am able to ping it from my machine and also access the console...
below is my script
build.properties
wn.bea.home=C:/Oracle/Middleware
all.needed.jars.path=D:/SourceCode/neededJAR
oracle.soa.home=C:/Oracle/Middleware/Oracle_SOA1
java.passed.home=C:/Oracle/Middleware/jdk160_24
#Deployment environment
deployment.plan.environment=DEV
#Deploy Action
deployAction =redeploy
#credentials
user=weblogic
password=welcome1
#For Composite deployment
serverURL=http://10.177.154.6:7001
forceDefault=true
server=10.177.154.6
port=7001
sarLocation=D:/SourceCode/JAR
build.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="soaDeployAll" default="deployAll">
<echo>basedir ${basedir}</echo>
<property environment="env"/>
<echo>current folder ${basedir}</echo>
<property file="${basedir}/build.properties"/>
<taskdef resource="net/sf/antcontrib/antlib.xml">
<classpath>
<pathelement location="${all.needed.jars.path}/ant-contrib.jar"/>
</classpath>
</taskdef>
<target name="init">
<tstamp>
<format property="timestamp" pattern="yyyy-MM-dd_HH-mm-ss"/>
</tstamp>
<property name="build.log.dir" location="${basedir}/buildlogs"/>
<mkdir dir="${build.log.dir}"/> <property name="build.log.filename" value="build_${timestamp}.log"/>
<record name="${build.log.dir}/${build.log.filename}" loglevel="verbose" append="false"/>
<echo message="Build logged to ${build.log.filename}"/>
</target>
<target name="deployAll" depends="init">
<echo>Deploy for environment ${deployment.plan.environment}</echo>
<antcall target="deployAllComposites"/>
</target>
<!-- Following Actions are performed for Composite files in Managed Server - Deploy,Redeploy -->
<target name="deployAllComposites" depends="init">
<foreach target="deployComposites" param="Files">
<fileset dir="${sarLocation}" casesensitive="no" includes="*.jar"/>
</foreach>
</target>
<target name="deployComposites" depends="init">
<basename file="${Files}" property="basename"/>
<echo>Deploy Project ${basename} for environment ${deployment.plan.environment}</echo>
<if>
<equals arg1="${deployAction}" arg2="deploy" />
<then>
<echo message="Deploying composites in Managed server........." />
<ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
<property name="serverURL" value="${serverURL}"/>
<property name="user" value="${user}"/>
<property name="password" value="${password}"/>
<property name="overwrite" value="false"/>
<property name="forceDefault" value="${forceDefault}"/>
<property name="sarLocation" value="${sarLocation}/${basename}"/>
</ant>
</then>
<else>
<echo message="ReDeploying composites in Managed server........." />
<ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
<property name="serverURL" value="${serverURL}"/>
<property name="user" value="${user}"/>
<property name="password" value="${password}"/>
<property name="overwrite" value="true"/>
<property name="forceDefault" value="${forceDefault}"/>
<property name="sarLocation" value="${sarLocation}/${basename}"/>
</ant>
</else>
</if>
</target>
</project>
please help....Hi,
Give the serverURL as http://<host>:<managed.server.port>/soa-infra/deployer and try.
e.g . http://10.177.154.6:8001/soa-infra/deployer
Regards,
Neeraj Sehgal -
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests
Hi,
We are using SCCM 2012 sp1 cu5 with one primary in the datacenter and a number of local DP's which are presently servicing 200 users, but will rise to 12,000. The Application Catalogue is installed on the primary server.
Once a day we get the above error and the message id is 8101, and sometimes a user will have to click on install twice, with the first one failing (the ones that fail are normally with dependencies which are quite large in size around 250MB)
I'm just wondering if this is something I should be concerned about, especially since we will be ramping up user numbers in the next few weeks, and if it could be down to volume of traffic, although the apps are downloaded to the users local DP.
Also, does this design look suitable to service this amount of users, or should I have local application catalogues? The WAN bandwith between the datacenter and the user sites has recently been upgraded and is pretty fast.
Thanks
JazHi Torsten,
Message ID is in the SMS_AWEBSVC_CONTROL_MANAGER status log and equates to "Application Web Service Manager detected AWEBSVC is not responding to HTTP requests. The http error is 12002.
Then, about 1 hr later in the same monitoring log I get Message ID 8102 "Application Web Service Control Manger detected AWEBSVC is responding to HTTP requests.
At the moment it isn't doing this very often, just once a day at different times normally, but it has also logged this a couple of times as well. I guess it may correspond to multiple users accessing the web portal at multiple times, but wondered if
anyone else has seen this behaviour and how it was fixed.
Thanks
Jaz -
Hi All,
I am seeing the following error for SMS_AWEBSVC_CONTROL_MANAGER component with Message ID: 8100
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
awebsctl.log file has below errors:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER 12/22/2014 3:37:55 PM
13920 (0x3660)
Management point and Application Catalog Website Point are installed on the same Server where I am seeing the error for Application Catalog Web Service Point role. Management Point and Application Catalog Website Point are functioning properly. Application
Catalog Website is working.
Thanks & Regards, KedarHi Jason,
Application Catalog Web Service Point and Application Catalog Website Point; both are installed as per below configuration on same Server:
IIS Website: Default Web Site
Port Number: 80
with default value for Web Application Name configured.
For SMS_AWEBSVC_CONTROL_MANAGER component, I am getting below error in Component Status:
Application Web Service Control Manager detected AWEBSVC is not responding to HTTP requests. The http status code and text is 400, Bad Request.
Possible cause: Internet Information Services (IIS) isn't configured to listen on the ports over which AWEBSVC is configured to communicate.
Solution: Verify that the designated Web Site is configured to use the same ports which AWEBSVC is configured to use.
Possible cause: The designated Web Site is disabled in IIS.
Solution: Verify that the designated Web Site is enabled, and functioning properly.
For more information, refer to Microsoft Knowledge Base.
And awebsctl.log has the below error lines:
Call to HttpSendRequestSync failed for port 80 with status code 400, text: Bad Request
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
Health check request failed, status code is 400, 'Bad Request'.
SMS_AWEBSVC_CONTROL_MANAGER
12/23/2014 11:04:36 AM 16388 (0x4004)
STATMSG: ID=8100
What should I check from IIS side?
Application Catalog Website is functioning properly.
Thanks & regards,
Kedar
Thanks & Regards, Kedar -
Hi,
When trying with Postman sending a REST call to Azure Storage Queues I get:
The MAC signature found in the HTTP request '***' is not the same as any computed signature. Server used following string to sign: 'POST.
The code I have for creating the Authorization Header:
var accountName = "my_account";
string key = ConfigurationManager.AppSettings["my_access_key"];
DateTime dt = DateTime.Now;
string formattedDate = String.Format("{0:r}", dt);
var canonicalizedHeaders = "x-ms-date:" + formattedDate + "\n" + "x-ms-version:2009-09-19" + "\n" ;
var canonicalizedResource = "/my_account/myqueue/messages";
var stringToSign = String.Format("POST,\n\n\n\n\n\n\n\n\n\n\n{0}{1}", canonicalizedHeaders, canonicalizedResource);
stringToSign = HttpUtility.UrlEncode(stringToSign);
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
var signature = Convert.ToBase64String(hmac.ComputeHash(Encoding.UTF8.GetBytes(stringToSign)));
var authorizationHeader = String.Format(CultureInfo.InvariantCulture, "SharedKey {0}:{1}", accountName, signature);
return authorizationHeader;
Anyone any idea what I'm missing/doing wrong?
Additional question: do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?
Thanks.One issue is with this line of code:
HMACSHA256 hmac = new HMACSHA256(Encoding.UTF8.GetBytes(key));
Please use the following:
HMACSHA256 hmac = new HMACSHA256(Convert.FromBase64String(key));
and that should take care of the problem.
Regarding your question, "do i have to create for every message I want to send a new Authorization header? Or is there an option (as with Service Bus Topics) to create a header that can be used for a certain timeframe?"
With your current approach, the answer is yes. What you can do is create a Shared Access Signature on the queue which will be valid for certain duration and then use that for posting messages to a queue using simple HttpWebRequest/HttpWebResponse.
Hope this helps.
Maybe you are looking for
-
Hello, from time to time i have to process two text-files that i receive from a 3rd party application. The "processing" is pretty simple, i only have to filter out some data with a sql query that is not complex at all. The filtered results have to be
-
I have tried rebooting, signing in and signing out, installing Java and even testing the Java to make sure it's running properly (and it is), and nothing is working.
-
thanks for reading this people. I have a third generation 32 GB ipod touch. I have the second newest version of itunes, and use a Windows 7. I bought 28 tv shows from my ipod (NOT computer) (some of them were the free kinds, if that has anything to d
-
ITunes can't read iPod contents after Archive & Install
Hi, I recently had to replace the hard drive in my Mac Mini, and now that it is back up and running again iTunes will no longer sync with my iPod. When I start iTunes, I get the following error message: iTunes cannot read the contents of the iPod "Ti
-
Problem with duplicate records..
Hi..I am trying to insert the records to the database based on a button click from a Swing frame..I have succeeded in that...But when i try to insert a duplicate record it is showing com.mysql.jdbc.exceptions.jdbc4.MySQLIntegrityConstraintViolationEx