Hi gurus when i am working on smartforms form creation

hi gurus when i am working on smartforms form creation over. after that how can i test the form the puchase order is coming properly or not . plz explain me.

here is the step by step procedure for the smart form creation for the purchase order...
http://www.****************/Tutorials/Smartforms/PO/page1.htm
regards,
venkat

Similar Messages

  • Problem when working with adobe forms

    hi friends,
    i am new to interactive adobe forms
    i am following the tutorials for learning adobe forms
    when i am working with adobe forms error was occured.
    cannot find PDL type for output device local
    Device type unsuitable for ADS documents
    and i am searching for related documents in sdn
    i had found no. of documents related to this issue but i can't find the proper solution
    i have already installed Adobe Life Cycle Designer.
    can anyone explain me clearly about the issue.
    thanks in advance.
    Regards,
    karunakar

    Check this link (and don't forget to search the forums next time...!)
    Re: Adobe document service error: SOAP Runtime Exception
    Regards,
    Trond

  • Problem when printing Thai Characters in Smartform

    Hi All,
    When printing thai characters in smartform it takes more spaces between characters than required. I tried all possible font to adjust the character spacing.
    Can anyone help me out.
    Thanks,
    Khushboo Dand

    Dear Khushboo, Jag
    I have observed that tThe tiny boxes that are appearing in the Smartform text element is only occuring when you are printing a variable whose content is thai and nothing else with that. by nothing else i mean no THAI hardcoded text.
    if you try and check you will observe that when you try to print something like this in your Text element
    with your paragraph format alright/ output device and device type everythng in place
    eg:
    ของผู้มีเงินได้ &G_VAR& -
    is printing alright : content of G_VAR is thai characters
    but if you are printing just the variable
    eg:
    &G_VAR& --- it will print boxes
    to overcome this after trying no.of checks / online helps / settings etc etc which , ofcourse, did not help
    I did a lil bit trick with the system
    You can create a character format in your smartstyle with FONT : THANGSAN and maintain the COLOR as white
    now go to your text element key in a THAI character at the start or end of you variable and assign your new character format to that character. and Eureka! it will work
    eg: <CF> ข </>  &G_VAR&  - --- seen in your change editor
    where CF is the new "colorless" character format I have asked you to create.
    Thanks and Regards,
    Charu.
    Edited by: Charu Borkar on Aug 3, 2011 00.14 am

  • Field list on/off drag and drop not working in smartforms

    Hello Friends,
    field list on/off drag and drop not working in smartforms.
    is there any settings or some components needs to be activated ??
    i can drag the fields from the list but when i drop in the text node its not dropping tht field.
    Regards,
    Sunny

    Hi Friends,
    Even I am facing the same problems. What is the solutions for this ?
    And may I know what software version (sap gui) are you using.

  • Work Order Smartforms.. How to get the Service level Items...

    Hi Experts,
    I am working on Work Order Smartform... I got everything but i am stucking at Service level Items... There is one Table called ESLL.. I am trying to fetch the data from that table but its not printing.. So, please help me regarding this issue.. any logic to implement it..
    Thanks in Advance
    Regards,
    Murlaikrishna

    Hi Karthik,
    For every PO we have item level data... in that we have Service level data tab. But there is no link between PO and Service level items to fetch, I have used the tables EKPO and ESLL for fetching the data from service level by usin PACKNO field.
    When I am writing the select statement for ESLL, service Item level data is not printing from ME23N...
    Thanks in Advance,
    Regards,
    Muralikrishna

  • When click printPreview in transaction smartform screen going one step back

    Hi all,
    When I am working on T -code 'smartform' after giving some inputs when I click on print preview, it is now showing print preview instead it is going to prevois screen..But same thing working fine in DEV system.
    Did any one experienced the same.. .
    Regds

    Hi samrat..,
    i think the problem is with the declaration of the Ztable field..
    Try declaring it in the FORM INTERFACE....
    since the warning mesg is something like Form is not active.. before executing it make sure that it is active..
    regards,
    sai ramesh

  • Photoshop Cs6 is hanging when trying to work in 3D when it wasn't before

    When I first started using 3D in Photoshop it was working rather smoothly and seemed to chug along fairly fast. Then one day when I was working in it as usual and tried to perform some random action it just started hanging with the spinning blue circle for about 2 or 3 minutes. It continued to do this ever since, sometimes hanging for up to 5 minutes before performing my command. Some actions cause it to hang longer than others, such as creating a new light and changing the diffuse color of a material, which is by far the worst in terms of the amount of time it will hang. I have searched the forums and google and tried all suggestions to any problem that seemed to have a similar nature. The only time that I had a partial success was after I had uninstalled Photoshop, then ran the adobe creative suite cleaner tool, then manually searched through the registry for every reference to adobe and Photoshop I could find and deleted them. I then reinstalled Photoshop and updated it. When I started using it in 3D after that it was running smooth as butter, no hangs or stalls on anything, including creating lights and changing diffuse colors. But my joy was not long lived, as after about 2 hours of use it started to do its usual behavior of hanging again.So I tried that approach again and it did not seem to work a second or third or fourth time. So out of desperation and all out of options, I decided to run process monitor from sysinternals to see if it showed me anything even though I knew that I probably would not understand what it were showing me. I noticed a lot of errors with the results of "name not found" for registry calls, "invalid parameter" for directory quarries, and "no such file" for file reads. But the one that seems to be happening the most whenever the program is hanging is it is trying to open a file from C:\program files\Adobe\photoshop x64\required\CgShaders, but that directory is nonexistent on my system. I was hoping that someone would be able to solve this for me as 3D in Photoshop is a big part of my workflow and I am all out of ideas. I'm going to include the process monitor log file and it will be in pml format which you will need process monitor to read, but it is a very small, portable, and free program which can be downloaded from http://technet.microsoft.com/en-us/sysinternals/bb896645. The Log file Can be downloaded from http://sdrv.ms/Xxcmuu (skydrive) or https://www.box.com/s/jzdmgmdmz7xe47smalv2 (box) .
    And here is my system info from Photoshop (I have a first generation I3 processor with intel HD graphics, which as I said was running fairly smooth before my problem started):
    Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
    Operating System: Windows NT
    Version: 6.2
    System architecture: Intel CPU Family:6, Model:5, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 2394 MHz
    Built-in memory: 7989 MB
    Free memory: 3903 MB
    Memory available to Photoshop: 7036 MB
    Memory used by Photoshop: 65 %
    Image tile size: 128K
    Image cache levels: 4
    The GPU Sniffer crashed on 1/22/2013 at 6:33:53 PM
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: Intel
    Video Card Renderer: Intel(R) HD Graphics
    Display: 1
    Display Bounds:=  top: 0, left: 0, bottom: 768, right: 1280
    Video Card Number: 1
    Video Card: Intel(R) HD Graphics
    OpenCL Unavailable
    Driver Version: 8.15.10.2858
    Driver Date: 20121009000000.000000-000
    Video Card Driver: igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32
    Video Mode:
    Video Card Caption: Intel(R) HD Graphics
    Video Card Memory: 3770 MB
    Video Rect Texture Size: 8192
    Serial number: Tryout Version
    Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
    Temporary file path: C:\Users\RYANS_~1\AppData\Local\Temp\
    Photoshop scratch has async I/O enabled
    Scratch volume(s):
      C:\, 341.9G, 102.3G free
    Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
    Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
    Additional Plug-ins folder: not set
    Installed components:
       A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112  
       ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
       adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
       AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0  
       AdobeOwl.dll   Adobe Owl 2012/06/26-12:17:19   4.0.95   66.510504
       AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
       AdobePIP.dll   Adobe Product Improvement Program   6.0.0.1654  
       AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
       AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
       adobe_caps.dll   Adobe CAPS   6,0,29,0  
       AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
       ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56  
       aif_core.dll   AIF   3.0   62.490293
       aif_ocl.dll   AIF   3.0   62.490293
       aif_ogl.dll   AIF   3.0   62.490293
       amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
       ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
       AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
       AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
       Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
       BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
       boost_date_time.dll   DVA Product   6.0.0  
       boost_signals.dll   DVA Product   6.0.0  
       boost_system.dll   DVA Product   6.0.0  
       boost_threads.dll   DVA Product   6.0.0  
       cg.dll   NVIDIA Cg Runtime   3.0.00007  
       cgGL.dll   NVIDIA Cg Runtime   3.0.00007  
       CIT.dll   Adobe CIT   2.0.5.19287   2.0.5.19287
       CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
       data_flow.dll   AIF   3.0   62.490293
       dvaaudiodevice.dll   DVA Product   6.0.0  
       dvacore.dll   DVA Product   6.0.0  
       dvamarshal.dll   DVA Product   6.0.0  
       dvamediatypes.dll   DVA Product   6.0.0  
       dvaplayer.dll   DVA Product   6.0.0  
       dvatransport.dll   DVA Product   6.0.0  
       dvaunittesting.dll   DVA Product   6.0.0  
       dynamiclink.dll   DVA Product   6.0.0  
       ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
       FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
       filter_graph.dll   AIF   3.0   62.490293
       hydra_filters.dll   AIF   3.0   62.490293
       icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615  
       image_compiler.dll   AIF   3.0   62.490293
       image_flow.dll   AIF   3.0   62.490293
       image_runtime.dll   AIF   3.0   62.490293
       JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
       libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)  
       libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0  
       LogSession.dll   LogSession   2.1.2.1640  
       mediacoreif.dll   DVA Product   6.0.0  
       MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
       msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1  
       msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910  
       msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1  
       pdfsettings.dll   Adobe PDFSettings   1.04  
       Photoshop.dll   Adobe Photoshop CS6   CS6  
       Plugin.dll   Adobe Photoshop CS6   CS6  
       PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383  
       PSArt.dll   Adobe Photoshop CS6   CS6  
       PSViews.dll   Adobe Photoshop CS6   CS6  
       SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
       ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
       tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406  
       TfFontMgr.dll   FontMgr   9.3.0.113  
       TfKernel.dll   Kernel   9.3.0.113  
       TFKGEOM.dll   Kernel Geom   9.3.0.113  
       TFUGEOM.dll   Adobe, UGeom©   9.3.0.113  
       updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
       WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
       wu3d.dll   U3D Writer   9.3.0.113  
    (post shortened)
    Optional and third party plug-ins: NONE
    Plug-ins that failed to load: NONE
    Flash:
       Mini Bridge
       Kuler
    Installed TWAIN devices: NONE

    Thank you very much for your reply. And yes I have tried all of these suggestions that you have just made. And as for the GPU crash I did not notice that in there before but I also didn't look for it because every time I looked before it wasn't there, and looking at the date that was when that I was rolling back\uninstalling\reinstalling\trying modded drivers, etc., Which is probably the reason why the gpu sniper crashed.
    One interesting thing that you said was whether there is the same failure in a new design as opposed to an existing one. The answer to that is yes and no. To elaborate, when the program was working as it is supposed to eve and creating new lights and positioning them did not cause any slowdown despite the file that I was working on, but after the problem starts occurring it is like a snowball rolling down a hill. Every time I open the file (the one I was working on when the problem started to happen) to continue work on it be sluggish response of Photoshop is still there and only gets worse. If I start over on a new file the program will run much more smoothly, but will still had a slight amount of sluggishness with less intensive task whereas the more intensive task such as working with lights is still moderately sluggish but not to the extent as it was working in the previous file. As you said in your post it seems the father all along I get in my document the more pronounced and time consuming the freezes become. But nonetheless wants the problem has occurred it does not go away I can only lesson that by starting from scratch, which is not very convenient.
    If you look at the process monitor log file linked in my first post and search through it pretty quickly you will see photoshop doing this
    1-Operation: unknown     Path:C:\
    2-Operation: unknown     Path:C:\Program Files
    3-Operation: unknown     Path:C:\Program Files\Adobe
    4-Operation: unknown     Path:C:\Program Files\Adobe\Adobe Photoshop                                 Cs6 (64 bit)
    5-Operation: unknown     Path:C:\Program Files\Adobe\Adobe Photoshop                                 Cs6 (64 bit)\Required
    6-Operation: unknown     Path:C:\Program Files\Adobe\Adobe Photoshop                                 Cs6 (64 bit)\Required\CgShaders
    7-Operation: unknown     Path:C:\Program Files\Adobe\Adobe Photoshop                                 Cs6 (64 bit)\Required\CgShaders
    1-Result: INVALIDATE PARAMETER
    2-Result: INVALIDATE PARAMETER
    3-Result: INVALIDATE PARAMETER
    4-Result: INVALIDATE PARAMETER
    5-Result: INVALIDATE PARAMETER
    6-Result: NO SUCH FILE
    7-Result: NAME NOT FOUND
    It does this repeatedly over and over again, specifically when I tried to work with lights. The weird thing is that there is no directory in required called CgShaders. I see 1 CG.dll & 1 cgGL.dll in the Photoshop (64 bit) directory. To meet that just seems very strange and probably more than a coincidence and probably does not happen on everybody else's system.
    This is the process monitor log file that I saved in csv format and edited the first three blocks so that it fit correctly. Open it up in wordpad and you'll see what I mean. This is what I was talking about right above.
    https://www.dropbox.com/s/43waqf9wvc8xo7m/Logfile.CSV.rtf

  • When trying to work with Agilent 34401A multimeter (serial RS-232 connection), HP34401A Getting Started.vi gives always the message: "Error 1073807369 occurred at Old VISA Open ".

    Baud rate and parity are set correctly, RS-232 cable is also connected correctly. My QuickBasic program has no problems to read and write to the Multimeter. It is obviously a software problem: the same error is persistent if I disconnect RS-232 cable.
    I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm digital.ni.com and installed it. But it did not help.
    Thank you in advance
    Best regards
    Alexei Soloviev

    Hi Steve
    I have problems with the 34401A and serial communication. Do you remember
    where the error was in the code ?
    Thanks
    Klaus
    wrote in message
    news:[email protected]..
    > Alexei,
    > This may or may not help, I was tasked to do something similar
    > recently and found an error in their driver. The GPIB VISA worked
    > fine, but when I tried it on serial it played up. There was an errant
    > carriage return (or CR/LF I can't remember). GPIB liked one and Serial
    > liked the other. It always amuses me that we never have problems with
    > Quickbasic!.
    > If you want me to dig deeper give me a shout.
    >
    > Steve Watts
    >
    > On Thu, 24 Jan 2002 06:16:55 -0800 (PST), "Alexei V. Soloviev"
    > wrote:
    >
    > >When trying
    to work with Agilent 34401A multimeter (serial RS-232
    > >connection), HP34401A Getting Started.vi gives always the message:
    > >"Error 1073807369 occurred at Old VISA Open ".
    > >
    > >Baud rate and parity are set correctly, RS-232 cable is also connected
    > >correctly. My QuickBasic program has no problems to read and write to
    > >the Multimeter. It is obviously a software problem: the same error is
    > >persistent if I disconnect RS-232 cable.
    > > I downloaded NI-VISA 2.6 for Windows 95/98/NT/ME/2000/XP frorm
    > > digital.ni.com and installed it. But it did not help.
    > >Thank you in advance
    > >Best regards
    > >Alexei Soloviev
    >

  • How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. I don't want to restore everything just my Pages documents.

    How do I use icloud to restore my documents that were in Pages? Pages got stuck in "waiting" to update and when nothing else worked I deleted it and reloaded Pages. Everything I can find is about wiping everything out and restoring everything. I don't want to restore everything just my Pages documents (and numbers and keynote that also locked up during updating).

    What I meant is turn off Documents and Data in iCloud in OS X. Keep it on on your iOS devices. iCloud will sync documents between the iOS devices and make them available on the iCloud web site, but it won't mess up iWorks' open and save dialog boxes. It also won't assume that you want all your documents in iCloud, which I think is undesirable anyway.
    Keep iOS and OS X separate, and use the web site to move files between the two as necessary.
    iOS iWork is different from OS X iWork. There are fewer fonts on an iOS device. iOS iWork programs have slightly different feature sets than OS X iWork programs, and the file formats are different. iCloud automatically converts the file format when necessary, but if you make a habit of saving things directly to iCloud, you are limited to the lowest common denominator between the two versions of iWorks. So why would anyone want iWork on the Mac to open and save documents on iCloud by default?
    If you want to store files in the cloud and sync them on your Macs, SugarSync is a much better solution. It lets you choose your sync folders, it doesn't make you reorganize your files, it lets you sync all file types, it doesn't convert files to a different format and back, and it stores everything in the cloud, too. Just the simle act of saving a file backs it up and syncs it. I wouldn't live without it. iCloud is best with iTunes purchases and synchronizing Mac settings and iOS files; I woudln't live without it. The two make an unbeatable combination.

  • When silverlight will work in windows 8 and windows 10

    when silverlight will work in windows 8 and windows 10?

    Hi,
    I'm using windows 8.1,silverlight 5 works fine on my machine.
    If you want to know if silverlight can works on windows 10 , you should wait for microsoft's offical statement.
    Learn more about silverlight comaptible system,please check link below:
    http://www.microsoft.com/getsilverlight/get-started/install/default.aspx?reason=unsupportedplatform  
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • My Macbook Pro (OSX 10.6.7 2.26 GHz Intel Core 2 Duo) has started misbehaving on me. When I'm working, the cursor will start spontaneously moving to the left in a straight line, and randomly right clicking on things.  If I close the computer and open it b

    my Macbook Pro (OSX 10.6.7 2.26 GHz Intel Core 2 Duo) has started misbehaving on me. When I'm working, the cursor will start spontaneously moving to the in a straight line, and randomly right clicking on things.
    If I close the computer and open it back up, it sometimes stops for a little while, then will spontaneously start again. Any help would be truly appreciated. Thanks!

    See this knowledge base article. Also, you might want to update to 10.6.8 (don't know that that will fix your problem, but it's the latest version of Snow Leopard).
    Clinton

  • Case when statement not working

    hi there, I am trying to work out how to get my case statement to work.
    I have got the following code. 
    select pthproto.pthdbo.cnarole.tpkcnarole, pthproto.pthdbo.cnaidta.formataddr as formataddr, cnaidta.dateeffect as maxdate, isnull(cast (pthproto.pthdbo.cnaaddr.prefix1key as varchar (50)),'') + ' ' + isnull(cast (pthproto.pthdbo.cnaaddr.prefix2key
    as varchar (50)),'')+ ' ' + isnull(cast (pthproto.pthdbo.cnaaddr.prefix3key as varchar (50)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.houseidkey as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component1
    as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component2 as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component3 as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component4
    as varchar (100)),'') + ' ' + isnull (cast (pthproto.pthdbo.cnaaddr.component5 as varchar (100)),'') as mailaddress, row_number() over(partition by pthproto.pthdbo.cnarole.tpkcnarole order by cnaidta.dateeffect desc) as rn into #address from pthproto.pthdbo.cnarole
    inner join pthproto.pthdbo.cnaidty on cnarole.tfkcnaidty =cnaidty.tpkcnaidty inner join pthproto.pthdbo.cnaidta on cnaidty.tpkcnaidty = cnaidta.tfkcnaidty inner join pthproto.pthdbo.cnaaddr on cnaidta.tfkcnaaddr = cnaaddr.tpkcnaaddr order by cnaidta.dateeffect
    select *, case when mailaddress is not null then mailaddress else formataddr end as test from #address where tpkcnarole = '18306695'
    The case when statement is struggling with how i have created the column mailaddress.  As it does seem to understand when it is null.  In the example I have got there is no value in any of the columns to create
    the mailaddress.  Hence why I am referencing it from elsewhere.  Due to having a way on the system where it picks up data from 2 different places.    The mailaddress is always correct if there is one, hence why
    trying to reference that one first.  So how do i change this case when statement to work ?            

    It's ok I have fixed my own problem
    when
    (mailaddress
    is
    null 
    or mailaddress
    = 
    then formataddr
    else mailaddress
    end
    as test
    case

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • Final Cut Pro X keeps freezing when sharing my work to You Tube, it does about 90% of the upload and then seems to get stuck.  Any ideas on how to resolve this please?

    Final Cut Pro X keeps freezing when sharing my work to You Tube, it does about 90% of the upload and then seems to get stuck.  Any ideas on how to resolve this please?

    this is a perfect question to ask the users in the FCP X forum.  Good luck.  https://discussions.apple.com/community/professional_applications/final_cut_pro_ x

  • When I'm working with my Ipad it locks on its own and every several minutes I have to unlock it. Help please

    When I'm working with my Ipad it locks on its own and every several minutes I have to unlock it. Help please

    If your iPad was work provided there may be options that they locked out. For example, a privately owned device can be set to never auto lock (last I knew anyway) but it's not uncommon for work or school provided devices to not have the 'never' option.

Maybe you are looking for

  • I dont have User Name and Password

    Hi guys I need reinstall my OS but and don't remember the Username and password what I can do???

  • Dynamic tables with XML schema binding

    Hello, I'm currently fighting a strange issue dealing with a complex dynamic form. This form contains multiple dynamic tables to which the user may add new lines or delete lines that are no longer needed. This is being implemented using the instanceM

  • Get iTunes to remember position in Playlist

    Hi, does anyone know how to get iTunes to remember where it was in a Playlist when you shut down your computer so that it starts up at the same place again instead of at the top of the Playlist? It seems capable of remembering which Playlist you were

  • SMS send/receive

    Is there a third party app that will allow users to send and receive SMS messages from an iPod touch? I know that there are solutions like teleflip, but that just results in SMS spam. I'd like something like the SMS app on the iPhone. I don't want to

  • Empty launchpad folders

    After I upgraded on OS X Yosemite, in Launchpad appeared empty folders. How I can delete it ?