Hi guys,Explain how to find whether the user request is dialog or bc ...

how to find whether the user request is dialog or bc or some other wp and where we can see that ?

Hello Damodar,
You can find out that in SM50.
However one piece of advice. I have noticed that you are raising lots of questions about very basic questions. Either you new to SAP or dont know anything about SAP Basis and want to get in this area. Or else you are preparing for some interview. In either of these cases expecting solutions given at SDN are not going to be of much help. Better read yorself in SAP Help as most people do. SDN should not be overly used for such purposes. Basic questions are welcome but you want to learn SAP through SDN !!!
Regards.
Ruchit.

Similar Messages

How to find whether the installed sap software is 32 bit or 64 bit?

How to find whether the installed sap software is 32 bit or 64 bit?
Hi Community,
We have Windows machine - 64 bit - x64. So, we can install either 32 bit or 64 bit sap software, both are supported, right. Now, a sap system is already installed on this machine and i would like to find out whether the sap software is 32 bit or 64 bit, how can i check?
I have already seen under Menu System - Status - Other Kernel Info & at OS level, with the command disp+work but i cant find the info iam looking for.
Please help.
Regards,
Mohan.

Hi Sunny,
Thank you very much for your quick reply.
Didnt know that one has to look under "Compiled for".
Regards,
Mohan.

How to find whether the created Sales Order is with BOM or without BOM ?

Hello,
I am technical guy i want to find whether the created sales order is with BOM or without bom.
Can anyone help me with table details.
Regards
VEk@

Go to TVAP & in FIELD STRUM give 'A' & PSGRP as 'SD01'.It will giveyou all the Item categories maintained in BOM.
Now you can cross - check with the Item Category maintain in the Sales Order.
Best Regards,
Ankur

How to find whether the cookies are enabled or not

Hi All,
Please suggest me, while sending the first request only how to find whether the cookies are enabled or not.
thanks.

you could use a servlet, write a cookie and then try to read it, if it's read then it's enabled else not.

Finding whether the user has administrative rights

Is there any way by which we can find whether the user has administrative rights or not using java?

The very notion of "administrative rights" is
platform-dependent. It's not standard or well-defined
what "administrative rights" means across all OSes.
You'll have to use JNI or Runtime.execI searched net a lot but couldnt find any tutorial or artical regarding how to achieve this in C or C++.
Any link will be helpful.

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out the user who has created a new field in the custom table.

How to find out the user details who has created a new field in the custom table.
Thanks,
Joan

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How to find out the users currently logged into ODI

Hi all,
How to find out the users currently logged into ODI Work Repository?
Thanks.

Hi,
It stores all the final queries in work rep table i.e "SNP_SESS_TXT_LOG" and the column is "TXT".
Here u can find all the ODI bkp process queries.Pls specify the SESS_NO for purtivular task u want to check which u can get this in ODI operator.
I dont think so that it will keep the substituted value(because its implicit and temporary process) but it will keep all the default values in the table SNP_VAR_SESS and the column is "DEF_V".
Thanks,
katukota

How to find out the user iD that previously deleted?

Hi,
My client has deleted some user ID in SBO v2004b. HOwever, when the client did that, he forgot to "deselect" the license that granted to the users going to be deleted. What's worse, he forgot the user ID that he deleted.
It makes the license available decrease. So, how can i find out the user ID that i previously deleted? Or any method to retrieve the correct number of license originally. ?
Thanks for your advice

Hi,
Have a look at the FAQ weblog, Missing licence topic:
/people/ibai.pea/blog/2006/07/26/sbo-faq
Regards,
Ibai Peñ

How to find out the user exit is implemented

Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,

Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance.

How to find out the User Details for the particular transaction

Hi,
Actually AJAB -Asset Year closing was done by One User.How and Where to find out the User details who executed the Transaction.Kindly tell me the T-code for this.
Thanks
Sap Guru

Hi:
Please contact you basis administrator.Give him the T.code and date when Year closing was done. He may resolve your problem.
Please let me know if you need more information,
Assign points if useful.
Regards
MSReddy

How to find out the user from the Jobs queue in Report server

Hello All!
I have a doubt about finding out the user from the scheduled jobs queue. Say I go ahead and schedule a report on Reports Server how can I find out the user name. When I view the jobs using showjobs I could see that the DBMS_JOBS table has a column under "Job Owner". But it invariantly shows it is "rwuser". So is there a way to find out which user has scheduled which job?
Regards
Shobha

hi,
The below tables will give only the name .
USER_ADDRS
USER_ADDR
USER_ADDRP
USR02
i think you need email address .
you can use this Tcode : su01d
and give the user name and excute it
i hope it will help you.
Ram
Edited by: Ram velanati on Jun 30, 2008 6:57 PM

How to check whether the user has a certificate or not?

Hi everyone.
We're currently finishing a web project and the last step is to check whether users accessing the application have a valid certificate or not.
Users with a valid certificate can access all the data. Users without any certificate installed on their browsers may still proceed, but they won't be able to see all data. Please note that the lack of a certificate doesn't mean an error - it's just another use case.
Is there any way to check whether users have a certificate installed on their browsers?
Thanks in advance.
Edit: sorry, I forgot to post some tech details. We're using Struts 1.2 on a Tomcat 5 app server.
Message was edited by:
advaca

I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
So, yeah - good luck with that
Lee

How to find out the user list that created by someone?

Hi all:
Now I want to develop a program that can find out the user list created by someone.
such as :
John create 3 user in SAP ,they are u1,u2,u3.
Susan create 2 user in SAP , they are s1,s2.
I input the the parameter such as John , the program can give me the list :u1,u2,u3.
Could you tell me which table should I use in this program?
Thanks .
Elisa.

Hi Ling,
As per my understanding, you are looking for listing down the number of Users created by a particular users of the System. Like a System Administrator has created some 30 users. If this is correct, then you can use the table
USR02 - Logon Data (Kernel-Side Use). This table has 2 fields which are of importance - BNAME - User Name in User Master Record & ANAME - Creator of the User Master Record. You can query the ANAME with the username of the system and you will get the resultant users.
But I would reccomend to search the Table for a standard class, function module or RFC or BAPI so that you can reuse the same and need not to develop from the scratch.
Hope this will help.
Thanks,
Samantak.

How to find whether the output file is generated or not?

Hi,
I ran EDI 855 program for one of our customer. The program succesfully completed and it shows in the logfile that few documents got processed and few lines got processed. But the output file in the outbound directory shows the file size as zero.
Can anyone please let me know what could be the problem.
And please let me know how to check whether flatfile is generated succesfully for the request run for any customer.
Thanks in advance.
Satya

Hi Venkat,
As every one have already explained other points,in standard SAP there is no provision to determine as if the sales order is intercompany or not.
But if you want you can create a user status as normal sales order and intercompany sales order.So by checking the status at table level or in order you can determine if it is Intercompany or normal sales order.
Best way is to create a different document type itself which will be exclusively used for intercompany orders.So it will be easy for reporting and tracking purpose.
Reward points if useful
Regards,
Amrish Purohit

Hi guys,Explain how to find whether the user request is dialog or bc ...

Similar Messages

Maybe you are looking for