Hi guys, I hope someone can help me with a technical question

a couple of days I recharge the battery of my iphone with the original usb adapter to the electrical plug and then in the right moment when I plugged the phone it came a little spark from the electrical plug and my iphone was shut down by itself then I tried to turn it on normally but the phone did not responde so I did a hard reset holding power and home buttons after that the phone is working properly, usually now I have been charging the battery in the same electric plug with the same usb adapter and also with my laptop so my question is what happenned that day? why my iphone was shut down by itself and later everything just work correctly,I know that electronic devices are protected with fuses or capacitors, but also I know that USB adapters come with such protection to protect electronic devices so even my phone works correclty do you think some fuse or capacitor has been broken that day in my iphone?, I dont think it was a shortcircuit because the fuses and the electrical installation of my house are intact, the electrical plug and my usb adapter both also are intact, I would appreciate any information about this guys.

Thank you for your response, I'm sorry I'm just writing from my phone, anyway I tried reedit the question se this may be more understandable
A couple of days ago I charged my iphone with the original usb adapter to the wall plug, in the right moment when I plugged the phone it came a little spark from the wall plug then my iphone was shut down by itself .
I tried to turn it on normally but the phone did not responde, so I did a hard reset holding power and home buttons after that the phone is working properly.
Usually now I have been charging the battery in the same electric wall plug with the same usb adapter and also with my laptop.
So my question is what happened that day? why my iphone was shut down by itself and later everything just work correctly, I know that electronic devices are protected with fuses or capacitors, but also I know that USB adapters come with such protection to protect electronic devices.
Even my phone works correctly do you think some fuse or capacitor has been broken that day in my iphone?, I dont think it was a shortcircuit because the fuses and the electrical installation of my house are intact, the electrical plug and my usb adapter both also are intact, I would appreciate any information about this guys.

Similar Messages

Hi guys I hope someone can help me

Hi guys I hope someone can help me I have a problem with Apple compressor 4. Everytime I use Apple clusters it works for the first time. And when I try to use it again it disappears. I have to delete the program and reinstalled it and then I can activate the clusters again does anyone know why this happens.

There was just an extensive discussion about clusters here. See if there is anything helpful it that may apply to you.
Open up Qmaster from the Compressor menu toolbar. Post screen shots of the Setup window and Advanced window.
Russ

I have 2 problems I hope someone can help me with.

As the title says, I problems I hope someone can help me with as I don't know who else to ask for this.
1. I tried to pre-order Dying Light for the Xbox One and during checkout the system cancelled my order saying that the store stock had been spoken for. However, I went in once the game released to the same store and was able to purchase the game no problem so in effect I just missed out on my $10 pre-order certificate.I wanted to pre-order but it wouldn't let me - I have never seen this error before.
2. I took advantage of the $39.99 12+1 month Xbox Live Gold gift card you had on sale yesterday. Only the Halo one was abailable at my local store so I ordered 2 of those for pickup. I got home and used the cards and it was only for 12 months not 12+1 as it still says on the website here:
http://www.bestbuy.com/site/searchpage.jsp?st=3878002,+8972116&_dyncharset=UTF-8&id=pcat17071&type=p...
Is there a way to get the extra month advertized?
Thank you!
Solved!
Go to Solution.

Hello also_nadrag,
Thanks for writing in, and thanks too for being a My Best Buy member. We appreciate your loyalty. I'll be happy to talk to you about your recent online experiences.
From the sound of things you may have waited too long to attempt a pre-order for in-store pickup for Dying Light. As the order was not able to be processed, I'm afraid we will not be issuing the $10 certificate.
The product description on the Xbox Live Halo card is incorrect in labeling this item as including 1 extra month. As the image online and packaging indicates, this card has an extra bonus for Halo: The Master Chief Collection. We have reported the description error and I hope it is corrected soon. I am sorry for any confusion this may have caused.
Please visit us any time with questions or concerns.
Sincerely,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

Hope someone can help - Lightroom not working...at all...nothing....

I have tried installing about 20 or so times now and still cant get any thing at all when i launch the application - its likek it freezes. Something somewhere is missing or corrupt in my mac or the dowmload i downloaded and here's really hoping someone can help.
I have been using the beta since beta 1. This morning i downloaded the V1.0 and went through the usual steps on a mac. Launched the programme and got the option screen of entering a code or trying for free for 30 days.
Chose the free trial as my serial code had not yet been sent.
The application seemed to start and then said it was going to upgrade/update (or similar) my old library and this may take a few minutes. Fine - I've got all day - no worries.
5 hours later and not a whole lot appears to have happened other than Lightroom being frozen and I cant do much. Force quit ensues and an attempt to relaunch the application.
It launches and I getthe start up Window that lists all teh people who made it...but my cursor just goes into spinning ball mode an dnothing happens. This has now gone on about 20 or so times. I have tried removing the Lightroom with Appzapper and then re-installing the original beta followed by the new download....still nothing but a frozen lightroom
Anyone got any ideas - it must be something to do with my mac as everyone else seems to be using lightroom ok... and i'm desperate...seeing as i've been using it since beta 1
hope someone can help??

Another thing to check is the permission settings on the Lightroom application and on the folder where your library lives (or will live, if you're making a new one.)
The Lightroom application needs to have an owner who has read/write permission on the library folder's location. Normally this owner will either be your own user ID or the "system" ID -- check by doing a command-i and seeing what shows up under the 'Details' section of the 'Ownership and Permissions' section.
I was having exactly the same problem you described until I checked and discovered that for some reason, Adobe's Installer had installed Lightroom with a strange owner ID that only had read permission on my library folder's location. Since Lightroom needs to be able to both read and write to the library when it starts up, it was launching and then just sitting there doing nothing.
I changed Lightroom's owner to 'system,' then made sure that the 'admin' group (of which 'system' is a member) had read/write permission on my library folder's location. After that, Lightroom launched fine.

My trash bin has one item that refuses to be deleted. Under name, it says, 0. date; dec. 31, 1903. size; 0 kb. I have no idea where it came from. When I click, info. the info. window starts to appear, then goes away. Weird or what? Hope someone can help?

my trash bin has one item that refuses to be deleted. Under name, it says, 0. date; dec. 31, 1903. size; 0 kb. I have no idea where it came from. When I click, info. the info. window starts to appear, then goes away. Weird or what? Hope someone can help?

sorry i forgot that... i use php5 so i guessed at the module name... upon looking closer at the conf its mod_php4.c
<pre>
<IfModule mod_php4.c>
AddType application/x-httpd-php .php
</IfModule>
</pre>

Hi, I have a large number of products in one column and prices of the products in another. Most prices are different. I want to know if it is possible to increase all of the prices by 5% or 10% etc. Hope someone can help. From Stiffy

Hi, This is my first time I hope someone can help.
I am working with numbers and I have a large number of products in one column and the relevent prices in another. All the prices are different and I want to increase the price of everything by 5% or 10% etc. Is this possible?
Thanks in advance
Stiffy123

Ad a new, temporary column (or one you can hide when not using). Let's say the current Prices are in column C and the new column is D.
you can inflate the prices in column C by 5% by entering the formula in the first cell of column D as:
=C2*105%
likes this:
to fill down, select D2, then copy, then select the D3 thru the end of the column, then paste. Now select C2 thru the end of column C, now paste over the existing values using the menu item "Edit > Paste Values"
you can now hide column D until you need to use it again.

HI       I HOPE SOMEONE CAN HELP ME Thanks to all

HI I HOPE SOMEONE CAN HELP ME
I have put the structure of the XML and the code that I am trying to use as well as the error I am getting
I am trying to get to a Node in a XML file.
What I am needing to do is to put the FIRST_NAME + LAST_NAME into a Combo box so the user can select their name .
I also have this code, but get this error
"Configuration.java": getNodeValue() in org.w3c.dom.Node cannot be applied to (java.lang.String) at line 902, column 35
Thanks to anyone that can Help
Craig
        try {
          Node userNode = xmlDoc.getNode(
              "/EPOD_USER/USER_CONFIGURATION/USER_INFOMATION/ALL_USERS/");
          userXmlDoc = new XMLDoc("ALL_USERS");
          userXmlDoc.copyChildNodesToDoc(userNode);
          NodeList userNodeList = userXmlDoc.getNode("ALL_USERS").getChildNodes();
          System.out.println("Node List    " + userNodeList);
          UserNmaejComboBox.removeAllItems();
          userNodeHashtable.clear();
          for (int index = 0; index < userNodeList.getLength(); index++) {
            Element element = (Element) userNodeList.item(index);
            String Testing = element.getNodeValue("FIRST_NAME");
//This is where I get this error
//     "Configuration.java": getNodeValue() in org.w3c.dom.Node cannot be applied to (java.lang.String) at         line 902, column 35
            String userName = "User" + element.getAttribute("index");
            UserNmaejComboBox.addItem(Testing);
            userNodeHashtable.put(userName, (Node) element);
          if (UserNmaejComboBox.getItemCount() > 0) {
            UserNmaejComboBox.setSelectedIndex(0);
        catch (NodeNotFoundException nnfe) {}
        catch (IllegalNodeAddException inae) {
          System.out.println(inae.getMessage());
         saveEpod();
      }This is the structure of the XML
- <USER_INFOMATION>
- <ALL_USERS>
- <USERS index="1">
<TITLE>Miss</TITLE>
<FIRST_NAME>z</FIRST_NAME>
<MIDDLE_NAME>z</MIDDLE_NAME>
<LAST_NAME>z</LAST_NAME>
<EMAIL>z</EMAIL>
<MOBILE>z</MOBILE>
</USERS>
- <USERS index="2">
<TITLE>Mrs</TITLE>
<FIRST_NAME>l</FIRST_NAME>
<MIDDLE_NAME>l</MIDDLE_NAME>
<LAST_NAME>l</LAST_NAME>
<EMAIL>l</EMAIL>
<MOBILE>l</MOBILE>
</USERS>
- <USERS index="3">
<TITLE>Mr</TITLE>
<FIRST_NAME>Craig</FIRST_NAME>
<MIDDLE_NAME />
<LAST_NAME>Laird</LAST_NAME>
<EMAIL />
<MOBILE />
</USERS>
- <USERS index="4">
<TITLE>Miss</TITLE>
<FIRST_NAME>Jackie</FIRST_NAME>
<MIDDLE_NAME />
<LAST_NAME>Laird</LAST_NAME>
<EMAIL />
<MOBILE />
</USERS>
</ALL_USERS>
</USER_INFOMATION>

If you look at the API docs, you'll see that getNodeValue takes no args. If I'm not mistaken, you need to get the text node that is the child of the <FIRST_NAME> element node and call getNodeValue on it.

Hi there Hope someone can help me here. I am currently on holidays and my Kids have disabled my iPad so I now have to sync with my computer. I don't have my computer handy and want to use my device over the next few weeks if possible so can anyone help me

Hi there
Hope someone can help me here. I am currently on holidays and my
Kids have disabled my iPad so I now have to sync with my computer.
I don't have my computer handy and want to use my device over the next few weeks
if possible so can anyone help me please
Thanks
Darren
iPad 2 Wi-Fi + 3G, iOS 6.0.2

You need a computer.
Suggest you goto the nearest Apple Reseller and ask them to help you.

My iPod 5 screen is black the camera will make the clicking sound when pushing the home button and sleep button at the same time but the s teen stays black !! I hope someone can help

I have an iPod 5. The screen is black, I tried charging it. It makes a bing when I plug it in so power is going to it. When I hold the sleep button and home button to use the camera it takes a pic although the screen stays black the sound is there. I hope someone can help me !!!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT4597 Can I have 2 accounts on my iPhone. I have 2 on my computer and have a signal that 1 email is in my inbox. It is an iCloud message but I can't access it. Hope someone can help. Thanks, Lorna

Can I have 2 accounts on my iPhone. I have 2 on my computer and have a signal that 1 email is in my inbox. It is an iCloud message but I can't access it. Hope someone can help. Thanks, Lorna

You can only have one active iCloud account and one iTunes account. Are you by chance refering to email accounts defined in the mail app? If so, if one of the accounts (a non-iCloud account) is a POP account, then an email is usually sent to one device. Once sent, the email is deleted from the server, thus other devices never get copies. That's how POP works.

Hi, I hope someone can help.... When I open a new user account, which I want to set parental control on, the screen keeps freezing once the account is open. The wee rainbow circle appears and I can't do anything. Does anyone know how to fix this? Thanks

Hi, I hope someone can help.... When I open a new user account, which I want to set parental control on, the screen keeps freezing once the account is open. The wee rainbow circle appears and I can't do anything. Does anyone know how to fix this? Thanks

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Report any errors it found for Disk Repair, don't need the ones for Permissions Repair.
Try it again & see if anything changed, but have Activity Monitor open & Show All Processes & sorted on CPU%, also have Console open if we can... maybe not when switching, but we'll see.
Does this happen if you just try to create a new admin user???

Im new to java and hope somebody can help me with my question

Hi!
Im quite new to java and I just have some simple questions..
can someone please tell what kinds of error are considered as language violation for java? where can I find more info about these errors?
can someone give me a simple example on a kind of error that cannot be caught in both compilation and runtime? I hope someone can help me out. Thanks in advance!!

knightz211 wrote:
Im just asking about errors that might go against the language definition but cant be detected.. If it "goes against the language defintion," it will be detected by the compiler. That's half of the compiler's job is to tell you what you've done that violates the language spec.
because it confuses me when they say that such errors might occur so I just want to know what might these errors be.. sorry for that..Who's "they"? What exactly* did "they" say about "such errors"? It sounds to me like you're just confused, and you think there's something mysterious and inexplicable going on but you don't know what and don't even know what you're asking.
I would suggest not worrying about hypothetical problems that you can't even put into words and focussing on learning Java. Along the way, if you encounter real, specific, actual problems, ask about them, and you'll probably get answers about the problems themselves and the language or theory behind them.

I want to install xp on my MacBook Pro with i5 processor, but that creates the partition and restart the computer just stays in the following message: The Setup is inspecting your hardware configuration of your computer, someone can help me with this ?

I want to install xp on my MacBook Pro with i5 processor, but that creates the partition and restart the computer just stays in the following message: The Setup is inspecting your hardware configuration of your computer, someone can help me with this ?

The answer has not changed since your last post here https://discussions.apple.com/thread/3230576?tstart=0
There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

My iPhone stolen and I download find my iPhone on it also I can sea it online but I can't locate it so please help me .. What should I do . I heard apple support can activate the GBS and send it to my e_mail . So I hope they can help me with that ...

My iPhone stolen and I download find my iPhone on it also I can sea it online but I can't locate it so please help me .. What should I do . I heard apple support can activate the GBS and send it to my e_mail . So I hope they can help me with that ...
Best wishes ..
<Email Edited by Host>

These are user-to-user forums, I've asked the hosts to remove your email address from your post.
Apple and/or iTunes support can't locate it for you, only you can potentially locate it via http://icloud.com on a computer or Find My iPhone / Find My iPad on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPhone disabled on it.
If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

TS3694 I get an error while restoring, error unknown (1015) someone can help me with this problem?

I get an error while restoring, error unknown (1015) someone can help me with this problem?

is there a way to restore to the original? it is a fiends I phone and it was jailbroken, and it is giving her many problems, I look over the apple information but there is no steps to follow to fix this. do you have any idea

Hi guys, I hope someone can help me with a technical question

Similar Messages

Maybe you are looking for