Hi guys I hope someone can help me

Hi guys I hope someone can help me I have a problem with Apple compressor 4. Everytime I use Apple clusters it works for the first time. And when I try to use it again it disappears. I have to delete the program and reinstalled it and then I can activate the clusters again does anyone know why this happens.

There was just an extensive discussion about clusters here. See if there is anything helpful it that may apply to you.
Open up Qmaster from the Compressor menu toolbar. Post screen shots of the Setup window and Advanced window.
Russ

Similar Messages

Hi guys, I hope someone can help me with a technical question

a couple of days I recharge the battery of my iphone with the original usb adapter to the electrical plug and then in the right moment when I plugged the phone it came a little spark from the electrical plug and my iphone was shut down by itself then I tried to turn it on normally but the phone did not responde so I did a hard reset holding power and home buttons after that the phone is working properly, usually now I have been charging the battery in the same electric plug with the same usb adapter and also with my laptop so my question is what happenned that day? why my iphone was shut down by itself and later everything just work correctly,I know that electronic devices are protected with fuses or capacitors, but also I know that USB adapters come with such protection to protect electronic devices so even my phone works correclty do you think some fuse or capacitor has been broken that day in my iphone?, I dont think it was a shortcircuit because the fuses and the electrical installation of my house are intact, the electrical plug and my usb adapter both also are intact, I would appreciate any information about this guys.

Thank you for your response, I'm sorry I'm just writing from my phone, anyway I tried reedit the question se this may be more understandable
A couple of days ago I charged my iphone with the original usb adapter to the wall plug, in the right moment when I plugged the phone it came a little spark from the wall plug then my iphone was shut down by itself .
I tried to turn it on normally but the phone did not responde, so I did a hard reset holding power and home buttons after that the phone is working properly.
Usually now I have been charging the battery in the same electric wall plug with the same usb adapter and also with my laptop.
So my question is what happened that day? why my iphone was shut down by itself and later everything just work correctly, I know that electronic devices are protected with fuses or capacitors, but also I know that USB adapters come with such protection to protect electronic devices.
Even my phone works correctly do you think some fuse or capacitor has been broken that day in my iphone?, I dont think it was a shortcircuit because the fuses and the electrical installation of my house are intact, the electrical plug and my usb adapter both also are intact, I would appreciate any information about this guys.

Hope someone can help - Lightroom not working...at all...nothing....

I have tried installing about 20 or so times now and still cant get any thing at all when i launch the application - its likek it freezes. Something somewhere is missing or corrupt in my mac or the dowmload i downloaded and here's really hoping someone can help.
I have been using the beta since beta 1. This morning i downloaded the V1.0 and went through the usual steps on a mac. Launched the programme and got the option screen of entering a code or trying for free for 30 days.
Chose the free trial as my serial code had not yet been sent.
The application seemed to start and then said it was going to upgrade/update (or similar) my old library and this may take a few minutes. Fine - I've got all day - no worries.
5 hours later and not a whole lot appears to have happened other than Lightroom being frozen and I cant do much. Force quit ensues and an attempt to relaunch the application.
It launches and I getthe start up Window that lists all teh people who made it...but my cursor just goes into spinning ball mode an dnothing happens. This has now gone on about 20 or so times. I have tried removing the Lightroom with Appzapper and then re-installing the original beta followed by the new download....still nothing but a frozen lightroom
Anyone got any ideas - it must be something to do with my mac as everyone else seems to be using lightroom ok... and i'm desperate...seeing as i've been using it since beta 1
hope someone can help??

Another thing to check is the permission settings on the Lightroom application and on the folder where your library lives (or will live, if you're making a new one.)
The Lightroom application needs to have an owner who has read/write permission on the library folder's location. Normally this owner will either be your own user ID or the "system" ID -- check by doing a command-i and seeing what shows up under the 'Details' section of the 'Ownership and Permissions' section.
I was having exactly the same problem you described until I checked and discovered that for some reason, Adobe's Installer had installed Lightroom with a strange owner ID that only had read permission on my library folder's location. Since Lightroom needs to be able to both read and write to the library when it starts up, it was launching and then just sitting there doing nothing.
I changed Lightroom's owner to 'system,' then made sure that the 'admin' group (of which 'system' is a member) had read/write permission on my library folder's location. After that, Lightroom launched fine.

My trash bin has one item that refuses to be deleted. Under name, it says, 0. date; dec. 31, 1903. size; 0 kb. I have no idea where it came from. When I click, info. the info. window starts to appear, then goes away. Weird or what? Hope someone can help?

my trash bin has one item that refuses to be deleted. Under name, it says, 0. date; dec. 31, 1903. size; 0 kb. I have no idea where it came from. When I click, info. the info. window starts to appear, then goes away. Weird or what? Hope someone can help?

sorry i forgot that... i use php5 so i guessed at the module name... upon looking closer at the conf its mod_php4.c
<pre>
<IfModule mod_php4.c>
AddType application/x-httpd-php .php
</IfModule>
</pre>

Hi, I have a large number of products in one column and prices of the products in another. Most prices are different. I want to know if it is possible to increase all of the prices by 5% or 10% etc. Hope someone can help. From Stiffy

Hi, This is my first time I hope someone can help.
I am working with numbers and I have a large number of products in one column and the relevent prices in another. All the prices are different and I want to increase the price of everything by 5% or 10% etc. Is this possible?
Thanks in advance
Stiffy123

Ad a new, temporary column (or one you can hide when not using). Let's say the current Prices are in column C and the new column is D.
you can inflate the prices in column C by 5% by entering the formula in the first cell of column D as:
=C2*105%
likes this:
to fill down, select D2, then copy, then select the D3 thru the end of the column, then paste. Now select C2 thru the end of column C, now paste over the existing values using the menu item "Edit > Paste Values"
you can now hide column D until you need to use it again.

HI       I HOPE SOMEONE CAN HELP ME Thanks to all

HI I HOPE SOMEONE CAN HELP ME
I have put the structure of the XML and the code that I am trying to use as well as the error I am getting
I am trying to get to a Node in a XML file.
What I am needing to do is to put the FIRST_NAME + LAST_NAME into a Combo box so the user can select their name .
I also have this code, but get this error
"Configuration.java": getNodeValue() in org.w3c.dom.Node cannot be applied to (java.lang.String) at line 902, column 35
Thanks to anyone that can Help
Craig
        try {
          Node userNode = xmlDoc.getNode(
              "/EPOD_USER/USER_CONFIGURATION/USER_INFOMATION/ALL_USERS/");
          userXmlDoc = new XMLDoc("ALL_USERS");
          userXmlDoc.copyChildNodesToDoc(userNode);
          NodeList userNodeList = userXmlDoc.getNode("ALL_USERS").getChildNodes();
          System.out.println("Node List    " + userNodeList);
          UserNmaejComboBox.removeAllItems();
          userNodeHashtable.clear();
          for (int index = 0; index < userNodeList.getLength(); index++) {
            Element element = (Element) userNodeList.item(index);
            String Testing = element.getNodeValue("FIRST_NAME");
//This is where I get this error
//     "Configuration.java": getNodeValue() in org.w3c.dom.Node cannot be applied to (java.lang.String) at         line 902, column 35
            String userName = "User" + element.getAttribute("index");
            UserNmaejComboBox.addItem(Testing);
            userNodeHashtable.put(userName, (Node) element);
          if (UserNmaejComboBox.getItemCount() > 0) {
            UserNmaejComboBox.setSelectedIndex(0);
        catch (NodeNotFoundException nnfe) {}
        catch (IllegalNodeAddException inae) {
          System.out.println(inae.getMessage());
         saveEpod();
      }This is the structure of the XML
- <USER_INFOMATION>
- <ALL_USERS>
- <USERS index="1">
<TITLE>Miss</TITLE>
<FIRST_NAME>z</FIRST_NAME>
<MIDDLE_NAME>z</MIDDLE_NAME>
<LAST_NAME>z</LAST_NAME>
<EMAIL>z</EMAIL>
<MOBILE>z</MOBILE>
</USERS>
- <USERS index="2">
<TITLE>Mrs</TITLE>
<FIRST_NAME>l</FIRST_NAME>
<MIDDLE_NAME>l</MIDDLE_NAME>
<LAST_NAME>l</LAST_NAME>
<EMAIL>l</EMAIL>
<MOBILE>l</MOBILE>
</USERS>
- <USERS index="3">
<TITLE>Mr</TITLE>
<FIRST_NAME>Craig</FIRST_NAME>
<MIDDLE_NAME />
<LAST_NAME>Laird</LAST_NAME>
<EMAIL />
<MOBILE />
</USERS>
- <USERS index="4">
<TITLE>Miss</TITLE>
<FIRST_NAME>Jackie</FIRST_NAME>
<MIDDLE_NAME />
<LAST_NAME>Laird</LAST_NAME>
<EMAIL />
<MOBILE />
</USERS>
</ALL_USERS>
</USER_INFOMATION>

If you look at the API docs, you'll see that getNodeValue takes no args. If I'm not mistaken, you need to get the text node that is the child of the <FIRST_NAME> element node and call getNodeValue on it.

Hi there Hope someone can help me here. I am currently on holidays and my Kids have disabled my iPad so I now have to sync with my computer. I don't have my computer handy and want to use my device over the next few weeks if possible so can anyone help me

Hi there
Hope someone can help me here. I am currently on holidays and my
Kids have disabled my iPad so I now have to sync with my computer.
I don't have my computer handy and want to use my device over the next few weeks
if possible so can anyone help me please
Thanks
Darren
iPad 2 Wi-Fi + 3G, iOS 6.0.2

You need a computer.
Suggest you goto the nearest Apple Reseller and ask them to help you.

I have 2 problems I hope someone can help me with.

As the title says, I problems I hope someone can help me with as I don't know who else to ask for this.
1. I tried to pre-order Dying Light for the Xbox One and during checkout the system cancelled my order saying that the store stock had been spoken for. However, I went in once the game released to the same store and was able to purchase the game no problem so in effect I just missed out on my $10 pre-order certificate.I wanted to pre-order but it wouldn't let me - I have never seen this error before.
2. I took advantage of the $39.99 12+1 month Xbox Live Gold gift card you had on sale yesterday. Only the Halo one was abailable at my local store so I ordered 2 of those for pickup. I got home and used the cards and it was only for 12 months not 12+1 as it still says on the website here:
http://www.bestbuy.com/site/searchpage.jsp?st=3878002,+8972116&_dyncharset=UTF-8&id=pcat17071&type=p...
Is there a way to get the extra month advertized?
Thank you!
Solved!
Go to Solution.

Hello also_nadrag,
Thanks for writing in, and thanks too for being a My Best Buy member. We appreciate your loyalty. I'll be happy to talk to you about your recent online experiences.
From the sound of things you may have waited too long to attempt a pre-order for in-store pickup for Dying Light. As the order was not able to be processed, I'm afraid we will not be issuing the $10 certificate.
The product description on the Xbox Live Halo card is incorrect in labeling this item as including 1 extra month. As the image online and packaging indicates, this card has an extra bonus for Halo: The Master Chief Collection. We have reported the description error and I hope it is corrected soon. I am sorry for any confusion this may have caused.
Please visit us any time with questions or concerns.
Sincerely,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message

My iPod 5 screen is black the camera will make the clicking sound when pushing the home button and sleep button at the same time but the s teen stays black !! I hope someone can help

I have an iPod 5. The screen is black, I tried charging it. It makes a bing when I plug it in so power is going to it. When I hold the sleep button and home button to use the camera it takes a pic although the screen stays black the sound is there. I hope someone can help me !!!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT4597 Can I have 2 accounts on my iPhone. I have 2 on my computer and have a signal that 1 email is in my inbox. It is an iCloud message but I can't access it. Hope someone can help. Thanks, Lorna

Can I have 2 accounts on my iPhone. I have 2 on my computer and have a signal that 1 email is in my inbox. It is an iCloud message but I can't access it. Hope someone can help. Thanks, Lorna

You can only have one active iCloud account and one iTunes account. Are you by chance refering to email accounts defined in the mail app? If so, if one of the accounts (a non-iCloud account) is a POP account, then an email is usually sent to one device. Once sent, the email is deleted from the server, thus other devices never get copies. That's how POP works.

Hi, I hope someone can help.... When I open a new user account, which I want to set parental control on, the screen keeps freezing once the account is open. The wee rainbow circle appears and I can't do anything. Does anyone know how to fix this? Thanks

Hi, I hope someone can help.... When I open a new user account, which I want to set parental control on, the screen keeps freezing once the account is open. The wee rainbow circle appears and I can't do anything. Does anyone know how to fix this? Thanks

Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Report any errors it found for Disk Repair, don't need the ones for Permissions Repair.
Try it again & see if anything changed, but have Activity Monitor open & Show All Processes & sorted on CPU%, also have Console open if we can... maybe not when switching, but we'll see.
Does this happen if you just try to create a new admin user???

I have created a slideshow. How do I save it as I would like to incorporate it in a dvd I am making in IMovie. Hope someone can help. Thanks

I have made a slideshow in IPhoto. How do I save it? I want to incorporate it in a dvd I am making in IMovie. Hope you can help.
Thanks

Export it - that makes a QuickTime movie of it - and import to iMovie
Regards
TD

I have the ipad3,and I plug my charger in to charge my ipad and it comes up with the charging battery sign charges for a few minuets and then the white apple sign loads up into the screen then my ipad goes dead again,I hope someone can help:)

I have an ipad 3, when I plug my charger in the ipad comes up with the sign to say it is charging and then the apple sign loads up as if the ipad is about to come on,but then the ipad just goes dead again,I've tried holding both buttons down and I have also tried charging it over night but still nothing is working.
I hope someone could help:)

When you say you tried holding both buttons, did you mean you held both the power and home buttons until the apple logo appeared, ignoring the red slider if that appears? If so, exactly what happens?
You may need to take the iPad and charger to an Apple store genius bar to be tested by the techicians.

Hello all.   Hope someone can help me. I recently downloaded some updates for my imac. Since doing this the computer starts up but I get no logon box. The home screen opens but I can't open any programs or files. I've tried rebooting, no joy. Help!!

Hello all..   I hope someone here can help. I recently downloaded some updates to my imac. Since then the computer starts but I get the home screen opening without the logon box.    I can't open any programs or files and if I click on the Safari tab it disappears from the dock. I've tried rebooting with no joy.
I contacted technical help at Apple and was told to hold down the ctrl and alt keys with two other keys, I think the S or P keys when powering up. This worked
and the computer seemed fine but now the problem has reappeared. Is there a way to removed downloaded updates from the computer or revert it to an earlier state?   Sorry for the long question. Hopefully one of you clever people can help.   Simon

Clntxwhtby wrote:
Hay thank you for your time . I do that every time I know I am online. It says that I am up to date . I have found that I have 10.4.11 version, and that my boot version is 10.6.2, and that my kernel version is 8.11.1.
I have a hard drive icon on my desktop that says 10.6.2....
I use to have iphoto, it doesnt open anymore, it says there is 1.2gigs on that disk.There are many things on here that are the same way. Where do I start?
It's always good to go with one thing at a time and stay focused on that. Let's start with the OS you're running. Click on the Apple menu > About This Mac. What does it say under Mac OS X version ?

I'M NEW TO THIS, i hope someone can help me out with something so simple...

Hello all
i'm a first time user with java...my editor is Visual J++ (trial ed)...i'm testing out java to see if i want to use this for my company. for the past 4 days i've been trying to figure out how to connect to a database (i'm using MS SQL SERVER 2K) i've already posted in the JDBC Fourm...but found no answer...I apologize if I'm posting in 2 different forums at same time...but you gotta feel me on this, over 4 days on just trying to connect is not healthy LOL....
I already downloaded the driver from MS. Installed it followed the user guide (acrobat pdf file) on how to implement it...but i'm still stuck and haven't reached no where....what i want to do is a simple select statement but i can't do that without connecting first....maybe one of you out there has a sample code who uses MS SQL SERVER 2K...or someone can just be a miracle and help out on my code....the code will be attached below
import java.awt.*;
import java.awt.event.*;
import java.sql.*;
public class AccessApp extends Frame
     TextField driver = new TextField(80);
     TextField url = new TextField(80);
     TextField sql = new TextField(80);
     Button doIt = new Button("Do it!");
     TextArea resultArea = new TextArea(10,60);
     public static void main(String args[])
          AccessApp app = new AccessApp();
     public AccessApp()
          super("AccessApp");
          setup();
          pack();
          addWindowListener(new WindowEventHandler());
          show();
     void setup()
          setupMenuBar();
          setLayout(new GridLayout(2,1));
          Panel topPanel = new Panel();
          topPanel.setLayout(new GridLayout(4,1));
          Panel panels[]=new Panel[4];
          for(int i=0;i<panels.length;++i)
               panels=new Panel();
               panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
          panels[0].add(new Label("Driver:"));
          panels[0].add(driver);
          panels[1].add(new Label("URL: "));
          panels[1].add(url);
          panels[2].add(new Label("SQL: "));
          panels[2].add(sql);
          doIt.addActionListener(new ButtonHandler());
          panels[3].add(doIt);
          for(int i=0; i<panels.length; ++i)
               topPanel.add(panels[i]);
          add(topPanel);
          add(resultArea);
     void setupMenuBar()
          MenuBar menuBar = new MenuBar();
          Menu fileMenu = new Menu("File");
          MenuItem fileExit = new MenuItem("Exit");
          fileExit.addActionListener(new MenuItemHandler());
          fileMenu.add(fileExit);
          menuBar.add(fileMenu);
          setMenuBar(menuBar);
     void accessDB()
          try
               Class.forName(driver.getText()).newInstance();
               Connection connection=DriverManager.getConnection(url.getText());
               Statement statement = connection.createStatement();
               boolean hasResults = statement.execute(sql.getText());
               if(hasResults)
                    ResultSet result = statement.getResultSet();
                    if(result!=null) displayResults(result);
               else resultArea.setText("");
               connection.close();
          catch(Exception ex)
               resultArea.setText(ex.toString());
     void displayResults(ResultSet r) throws SQLException
          ResultSetMetaData rmeta = r.getMetaData();
          int numColumns=rmeta.getColumnCount();
          String text="";
          for(int i=1; i<=numColumns; ++i)
               if(i<numColumns)
                    text+=rmeta.getColumnName(i)+" | ";
               else
                    text+=rmeta.getColumnName(i);
          text+="\n";
          while(r.next())
               for(int i=1;i<=numColumns;++i)
                    if(i<numColumns)
                         text+=r.getString(i)+" | ";
                    else
                         text+=r.getString(i).trim();
               text+="\n";
          resultArea.setText(text);
     class ButtonHandler implements ActionListener
          public void actionPerformed(ActionEvent ev)
               String s=ev.getActionCommand();
               if(s=="Do it!") accessDB();
     class MenuItemHandler implements ActionListener
          public void actionPerformed(ActionEvent ev)
               String s=ev.getActionCommand();
               if(s=="Exit")
                    System.exit(0);
     class WindowEventHandler extends WindowAdapter
          public void windowClosing(WindowEvent e)
               System.exit(0);
I hope this helps
and hopefully someone will respond

First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave

Hi guys I hope someone can help me

Similar Messages

Maybe you are looking for