Hi Guys I know you are the gurus - Cannot get Save for Web & Devices Preview to work

Hello there! I hope you are well. But this feature in photoshop to preview my images on the web is important.
All I have done recently is clear some temporary internet files and hope this didn't contribute to my problem.
Any ideas or suggestions will be greatly appreciated.
Cheers
Tracey

Hi Tracey,
Does the dialog just not come up, does it present you with an error message, or ???
I'm sure you'll get more and more accurate suggestions with a bit more detail describing just what's going wrong.
-Noel

Similar Messages

HT4718 why did not i get installation CD with my mac book retina display 13", and let me know what are the tings i get with my mac book pro with free of cost?

why did not i get installation CD with my mac book retina display 13", when i bought. and let me know what are the tings i get with my mac book pro with free of cost?

MacBook Pro
http://store.apple.com/us/buy-mac/macbook-pro
What’s in the box.
MacBook Pro
Power adapter, AC wall plug, and power cord
No install media (CDs or DVDs) are included with Macs anymore.

The image exceeds the size Save for Web & Devices was designed for

I just upgraded from CS3 to CS5. I assumed that Save for Web & Devices would have been redesigned so that it would not complain with modern large photos that they were just too big!
However, it still does. I just don't get this. Photoshop in general now is editing very large images. It should be able to handle them also in this feature.
Is this just a legacy message, or is it really true that this feature can only handle small images?

Thanks for your comments, Marian.
As a book publisher, now an iOS app publisher also, it is not clear to me how you discern what Adobe intended for Save for Web and Devices. They don't tell us much. If you have found more details, please point me to them.
I dig and dig in the documentation, and nowhere see guidance as to its purpose and limitations. I wish there were more. The options and tools in it seem very good for taking an image you use for print, and making a web or iPhone version--better than I find in other tools. Apart from the warning, it sure looks like a general purpose resizing/optimization tool. I would like to know more from Adobe about what Save for Web actually does to my images in this process. Perhaps other tools would be better for images destined for devices such as the iPhone/iPad, rather than the web.
As far as we're concerned, the only issue is that Save for Web doesn't cope well with large files. There are ways to deal with that. Adobe has provided us all with some truly great tools in CS, but perhaps have neglected this corner a bit. Thanks for pointing me to workarounds. They're more awkward, but will get us there.
For my part, I mostly just ignore the warning, use Save for Web, and get my web/device images. Perhaps some day Adobe will tweak Save for Web and make it into the great general purpose tool it could be. In the meantime, they could at least put a 'don't show this message again' checkbox in the warning as Scott Falkner suggests.

Save for Web & Devices, The operation could not be completed

I keep getting this error when I Save for Web & Devices: The operation could not be completed.
I have saved for the web before for many more complex, larger images without a hitch.
I am using a psd format with an image that I designed. It is no more complex than others I have done. It is small, just a horizontal navbar about the size of the one on Apple's website.
I tried exporting it, flattening it, slicing it removing the slices.
I think it is a problem with the application itself.
I have tried repairing my permissions, restarting, and holding Cmd, Opt, Control, Shift during PS startup to reset the settings. Any insight would be appreciated.

GoodLuck4287-sxcElh wrote:
I think it is a problem with the application itself.
…and yet you don't even tell us what version it is—let alone pertinent details of your machine, OS, etc..
Please read this post by a forum host for advice on how to ask your questions correctly for quicker and better answers: http://forums.adobe.com/thread/375816?tstart=0 Thanks!

When you are going to make mozilla firefox for IOS devices?

hi, i love so much Mozilla FireFox, but I hold an iphone and I am curious to know if you are going to produce Mozilla Firefox on IOS devices because I am waiting for it hardly..
Thanks

There is no way for Mozilla to create Firefox for iOS. Apple greatly restricts what sort of applications can be created for iOS. The only thing that Mozilla could provide is a Firefox Sync client that then uses the iOS Safari browser.

Where are the official microsoft ISO's for windows 10 preview?

Hi All,
Where are the official Microsoft ISO's for Windows 10, 10051 and 10056 preview? They are all over the web, but I don't trust them unless they comes from Microsoft itself.
Many thanks,
-T

To ToddAndMargo,
RE : Is there a way to manually go to Windows Updates and manually download a particular file
No. All updates will be downloaded and installed automatically. You don't get to choose which to install and which to decline.
RE : And I can't find 10049's ISO either (from Microsoft).
As of now, the only most current ISO available is for build 10041. Build 10049 ISO is not yet available.
When build 10049 is released from Slow ring, usually it is also the time its ISO will be released.
RE: ESD file. How?
One cannot download an esd file of build 10049 from Windows Update.
You download and install the entire build 10049 via Windows Update. When it is done, you can then find its Installed.esd file from RecoveryImage folder and use it to manually create an ISO fie. You will need a specific program to create an ISO from Esd.
You might ask " why do I need an ISO fie if the operating system is already installed ?"
Some users are advocates of "clean install". They prefer clean install over upgrade install. Clean install can be done by burning the ISO file into a bootable DVD or an USB with at least 4 GB capacity and use it to install.
You can also use the same media and install in another compatible computer.
It can also serve as an emergency backup incase you need to reinstall.

HT4972 hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it for example i have a ipad 1st and i dont know whats is the latest version of ios for this device thanks

hi one of the main important questions which this site didnt answer to it is: whats the latest version of ios which any device work with it. for example i have a ipad 1st and i dont know whats is the latest version of ios for this device

Google "iOS versions" and read the first match (Wikipedia)........

How do I change the image size in Save for Web?

I just upgraded to Illustrator CS6 on a PC. I try to save my graphic in Save for Web and want to alter the image size, but it won't change, it just goes back to the original size. If I change the percentage box, the values change. I have tried linking and unlinking the proportions and nothing. What am I missing?? I don't have time to guess the percentage to get to the exact width I need.

Make changes in the Image Size section of the Save for Web. Input new values in Width and press Tab key to move to Height field. Click on the Link icon to unconstrain proportions. As you press the Tab key again to go out of focus of the Width and height boxes, you will see the changes reflect inside the Save for Web window. If this doesn't work then make sure you have updated Ai to 16.0.1 or 16.1.0 depending on the type of installation (from Disc or from Creative cloud) respectively.

Flash-project , you are the one we're looking for

Hey.
Have you got Adobe Flash CS4 Professional?
Do you enjoy working with the program?
Would you like to work on a simple project ...
... while earning a small amount of cash?
Contact
[email protected]
for more info!
- remember to check your junk mail while awaiting response, because for some damn reason it ends up there.
Later.

Not trying to hijack your post, but I've got the same issue here. Supposed to be getting 50Mbps down, 10Mbps up. I've contacted Comcast numerous times and am at my wits end. We're connected directly from the drop, no splitters, and have never gotten close to 50Mbps even on a wired connection. Comcast's solution is to keep sending techs out, but everytime they get here there's nothing they can do-- great signal, no hardware issues. Even if I tell Comcast support, per the techs that have been over, that the issue is not on my end and needs to be escalated, all they do is the typical troubleshooting by powercycling and try to send another tech out. Also interesting to note that the last tech that was out here said it looked like my net wanted to go faster, but looked as if it was being throttled-- yippie.
I've been told I'll get credit for the issue, has not happened. I've been told my issue will be escalated, but I wonder if it has. I've even contacted the Executive Customer Care Team and have been told my ticket has been recieved and to contact them. Despite multiple attempts to contact and inquire about any updates on the matter, I have not received a reply.
On average I get between 25-30 Mbps down, 5-10 up. It's gotten to be so bad sometimes I've gotten 1.18 Mbps down, 3.63Mbps up. Here's a speedtest from today:
http://www.speedtest.net/my-result/3126693072
Please step it up Comcast so we can all get what we're paying for.

What are the Corresponding fields in CRM for sales order in ECC

HI! Experts,
While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
VBKD-BSARK - Purchase order type
VBAK-BNAME - Name: user ordered
VBKD-IHREZ - Web Confirmation Number
VBAK-TELF1 - Telephone number
Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
Thanks and Regards
Mayank

Mayank,
May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
Check the following fields in CRM and see if you find the data you require.
VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
Hint: Once you have the R/3 order in CRM, try using the Report program (SE38) CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
Easwar Ram
http://www.parxlns.com

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

How to "Save for web" just the layer effect but not the content area?

I fill the area with white, then add outter glow to the layer. Now I want to "Save for web" the outter glow effect but not the white area. I want the white area to be transparent. If I delete the white area, the layer effect goes away, if I merge the layer with another to flatten (think then I can delete the white middle while keeping the layer effect stay), the layer effect look totally different after flatten.

Set the fill to 0% in the layers panel (not the opacity). Then save for web as a PNG24, with transparency checked.

A different take on the "Save For Web" color shift issue...

Ok, everyone who has fussed much with photoshop and "Save For Web" knows about the color shift issue. If you want your colors to look right after you "save for web", you have to work in the sRGB colorspace, and have Proof Colors checked (soft proofing on) and the proof color setup set to Monitor RGB, otherwise what you get looks terrible when displayed in a browser.
But of course if you are editing for print, this is exactly what you DON'T want to do. Well, I work in both. In fact, often the same images, and I want them to appear as close as reasonably possible in both print and web formats, and without a lot of fussing on my part. And I'm pickiest about the print mode, since I have the most control there, so that's the way I want to edit by default.
Nothing new here.
Now comes the interesting part (in my mind, anyway). Obviously there is a known remapping -- because PhotoShop DOES it when you select Proof Colors. So the inverse mapping must also be known (with some gamut issues, but I'm not concerned with those, because, after all, I'm VIEWING it on a monitor anyway!). What I want is a plug-in that automatically applies that inverse mapping so that, when I do a Save For Web, I end up with the colors I've been viewing all the time when setting the shot up in print mode. Then, too, I don't have to worry about what mode I'm in when I'm editing -- it just fixes it when doing a save-for-web.
Again, I want to edit in my normal print mode (typically ProPhoto colorspace, and with soft-proofing off or set to the printer/medium combination I expect to use), then do a single operation (might be a multi-step action) to "screw up" my colors so that when I then do a "Save-For-Web", the resulting image, when viewed on the average color-stupid browser, looks like the image I've been seeing in Photoshop.
Anyone know of such a beast?   I would gladly pay for a plug-in that really works and fixes the problem.
And if you have other solutions, I'm interested, but the absolute requirement is that it I do one single edit pass for my colors for both print and web use, and I get what I see on the screen in PS on both the prints and on the web display (i.e., working in sRGB/Monitor RGB mode all the time won't cut it). And PREFERABLY, let me do all my editing work in the ProPhoto (or at least AdobeRGB) colorspace so I have a gamut closer to what the printer can do.
Anyone got a decent solution for this?

Sorry, I think I'm being unclear. This has nothing to do with individual monitor profiles. In Proof Setup, "Monitor RGB" amounts to turning off ALL color management, and simply letting the monitor do what it will. It is what the vast majority of web browsers do (even if the operating system provides color management, the browsers don't take advantage of it), so that is what you need to consider for images that will be viewed on a web browser. If you convert your image to sRGB, select Monitor RGB in Proof Set up, and turn on Proof Colors, you will see the image as it would appear on a web browser (after you save it as a jpg or use "Save For Web/Devices" to save it as a jpg).   Since almost everyone is running different uncalibrated monitors, there will be lots of variation in how it will look to them, so precise control of the color is unimportant.
That said, I would expect the color on a calibrated monitor (such as the one I use when editing) to be reasonably close to the colors I am seeing while editing in PS. To the extent a monitor deviates from "calibrated", those colors will vary, but a good monitor should show good colors.   Unfortunately, this is NOT the case, as my previous post shows. The colors produced by the steps above are oversaturated and significantly shifted in hue. There is, to my mind, anyway, no reason for this. Adobe clearly knows what the mapping is between the colors as it displays them in PS and the un-controlled "Monitor RGB" -- that is, it is the color map they are using during normal editing display. If they were to reverse-apply that map prior to saving it as a jpg, then the image would appear on a browser on that same (presumably calibrated) monitor very similar to what you set up when editing. Anyone else viewing the image on a web browser with a calibrated monitor would also see good colors. To the extent other viewers' monitors are out of calibration, their colors will suck, but there's nothing you can do about that.
I guess in some sense I AM "asking for a Color-Mamangement-solution for a "non-Color-Management-situation", but specifically I'm asking for PS Color Management to do the best it can for non-Color-Managed situations that we all face every day.
Does that make more sense?

Save for web and devices preferences settings - where are they?

where are the preferences for "save for web and devices" to be found? I am using CS4, PC Windows Professional XP

The actual save for web preferences file for photoshop cs4 should be in
C:\Documents and Settings\user name\Application Data\Adobe\Save for Web\11.0
You should also in photoshop cs4 be able to reset the save for web preferences by holding down the Alt+Ctrl keys while selecting Save for Web & Devices from the File menu in photoshop cs4.

CS4 save for web - jpg are pixelated

Hi all,
I'm attempting to save an AI file for web use with "Save for Web & Devices" for use in a web browser. Somehow my jpgs (quality is set at maximum) are pixelated.
here's a screen grab to see how the selections are set. There are a few new fly-out menus that I don't fully understand so maybe something in there needs to be tweeked.
thanks for the help
Pierre

Thanks for pointing me in the right direction.
Under the Image Size tab, Anti-Alias needed to be checked.
thanks for the help Silk!

Hi Guys I know you are the gurus - Cannot get Save for Web & Devices Preview to work

Similar Messages

Maybe you are looking for