Hi guys, I recently got a WRT54G v5 wireless router, and...

Hi guys, I recently got a WRT54G v5 wireless router, and when I try to play the PC multiplayer game Call of Duty 4, it kicks me for having 'No Packet Flow' and "Loss of Key Packets". I didn't get these with my other router so I know that the WRT54G is the problem. It says that you only get these problems if your router drops OOB packets which COD4 uses frequently. How do I stop the router from dropping OOB packets?

Well try reducing the MTU to 1200. And also upgrade the firmware.
To upgrade the firmware :
Connect the computer to the router.
Open the setup page (Intrnet Explorer : 192.168.1.1).
Username :
Password : admin
Go to Administration Tab. Go to firmware upgrade.
Browse and select the bin or img file thats extratcted from the download.
Start to upgrade.
Reset the router and then reconfigure it. Should work.
To check the latest firmware for ur router, click here.
Should help.
http://linksysfirmwares.googlepages.com
C | EH
linksyshelp.blogspot.com

Similar Messages

Using Mac OSX 10.7.1: recently replaced our DSL modum & wireless router and suddently I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing historty, forms, cookies and cache but it continues to happen.

Using Mac OSX 10.7.1: recently replaced our DSL modum and wireless router, suddenly I can't get some web sites to load. Many do, but Twitter and others often do not. I've reset the browsing history, forms, cookies and cache but it continues to happen.

Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com.

Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

Hello guys i recently got my iphone 4G S and when i connect it on computer i cant see it in itunes i tryed everything with restarting device reinstalling the itunes and usb fixing but i cant still see it in itunes.On other computers i can see it help plz

Verify Step 2 and 3 mentioned in the article.
http://support.apple.com/kb/TS1538

Hi guys, I recently got a new MacBook Pro with a USB Superdrive. A disc won't eject, does anyone know of a way to eject it? I'm in Morocco for the next 10 days so going to an Apple store is not possible. Any help would be gratefully received, thanks

Hi guys, I recently got a new MacBook Pro with a USB Superdrive. A disc won't eject, does anyone know of a way to eject it? I'm in Morocco for the next 10 days so going to an Apple store is not possible. Any help would be gratefully received, thanks

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
      left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
      your Utilities folder. At the prompt enter or paste the following:
        /usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

Hey guys, I recently got an Ipad 4 but it seems that there's no facetime on it. I really need this feature to be working. any suggestions?

hey guys, I recently got an Ipad 4 but it seems that there's no facetime on it. I really need this feature to be working. any suggestions?

Iif you bought it from the UAE or other middle eastern country, facetime is blocked at the hardware level and can never be installed.

HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and now im getting the error message as "PDP authentication failure" Im using Aircel carrier.

HI, Im using Iphone 4 and i recently got my IOS updated to IOS7 and now im getting the error message as "PDP authentication failure" Im using Aircel carrier.
Please let me know how to fix this issue

update...
I am not one to give up. So I called AT&T today. Now they are telling me they canceled my order because they were unable to fulfill my order. Basically, AT&T told me they sold out so they canceled my order so I can proceed to reorder again. It took them 4 days to realize this. I will be lucky if I get a new phone by Christmas. I am sure they will find a way to cancel my order again.
Again, I argued, how is this my fault. I placed my order at the store around 11 a.m. Pacific time. My friend ordered his phone online sometime after me. He got his but my order was canceled. AT&T tried to explain to me that they sold over 600,000 phones, almost 500 per minute during there peak. Again, I asked, how this was my fault.
I can understand over selling the phone. It is a great product. There is no reason to cancel my order. You adjust my order and tell me you will let me know when my phone will be in. I would have been mad that my phone was going to be late but I would have survived. At least I would be getting one.
At this point, I have no order and AT&T or Apple website will allow me to order one. I just want to get in the QUEUE for one.
Frustrated.

I recently got a phone from a friend and I locked it. I cant hook it up to itunes cause it was set up to hers so is there any other way to unlock it?

I recently got a iphone from a friend and I locked it, I cant hook it up to itunes cause it was started with her acct. Is there any way I can unlock this phone?

iOS: Unable to update or restore

I recently got an apple computer at work and downloaded my Juno email on it. Now, I can not access all my past email in my juno inbox from other computers. Pls help.

I recently got an apple computer at work and downloaded my Juno email on it. Now, I can not access all my past email in my juno inbox from other computers. Pls help.

If it's a POP account and you set it up in Mail with the option to delete read messages from the server, then you can indeed no longer read it on the server. You may be able to restore the messages to the server if you also have IMAP access. Ask your mail service provider whether it's possible.

Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images

Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images - and at times - videos don't load. I've increased / deleted Cache. Suggestions? Misconfig? Could it be possible my configuration from MacBook to router isn't correct?
Thanks!

JG,
Thanks for the info.
Couple of questions. I found an apple support document on this topic that opened with this line:
"AirPort Express and all AirPort Extreme base stations can use WDS. Earlier AirPort base stations can't."
If the TC is an airport extreme base station, why can't this work to extend the network? I think I misunderstand. Here is the full article:
http://support.apple.com/kb/HT2044?viewlocale=en_US
If I buy a new airport extreme, set it to wireless-n only as my main router, am I correct that my existing time capsule could be used as a bridge if plugged in upstairs?
Final question (and that should do it), could I take this old airport express, plug it in upstairs using the ethernet connection, and just create a separate wireless network to use with a different name?
I'd like to keep one network if possible but just kicking around short term solutions.
Thanks again.

WRT54G & FIOS Wireless Router Used Together - POSSIBLE???

Hello guys, I pretty much drew a picture of what I wanted to do so hopefully you guys will understand me much easier. Sorry, I am new here, so I like to introduce myself, I'm Mo. I'm pretty good with computer but learining more and more about networking. I just recently got FIOS in my house. It comes with a wireless router but problem w/ my basement is that I cannot get good connection on the 3rd floor. So my speed is really really slow.
I wanted to install the Linksys router to help that. Am I able to hook up my linksys router and use it as a "hotspot" for my 3rd floor? I get the connection from the Verizon router then goes into the 16 port switch I have installed, which sents wired connection to each rooms of the house. So I took my linksys router and plugged into one of those rooms and tried to get connection from the switch but didn't work.
Is there a way of doing this? Here's a picture I drew up. Thank you!
http://i34.photobucket.com/albums/d107/MohaimenK/WIRELESS.jpg

Yes, it should be possible to do what you have described. However, we need more information.
Please connnect your computer, by ethernet cable, directly to your FIOS wireless router. Verify that you have a properly working Internet connnection. Then do the following:
Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key. Post all the results.
Also please state the make and exact model number of your FIOS wireless router.
Message Edited by toomanydonuts on 02-15-2008 03:33 AM

WRT54G v5 Wireless Router

I hope someone can help me.
I have the WRT54G v5 Router and a while back i could not access my router.
I went through tech support and we did firmware upgrade and got my router to work to where I could access it again.
Now I went to access it and it will not accept my username and password, and it will not accept using just "admin" in the password field.
The settings to the router as far as WEP are still there but i cannot gain access to make changes.
Please help!!!!!!!!!

- try deleting cookies and clearing history...
- delete cached pages....

HT4111 I have an IPAD updated with iSO 7. Recently I purchased a logitech wireless keyboard and I went to pair the two up and the IPAD shows that the keyboard is paired or connected but when I type using the keyboard it does not transfer to the pad scene.

I have an IPAD updated with iSo 7. Recently I purchased a logitech wireless keyboard.
I went to pair the two up and the IPAD recognizes the keyboard and cites that it is connected.
But I proceed to type the words do not transfer to the screen.
Any suggestions? Techs at Best Buy state that the iSO 7 is not yet compatible with the keyboard manufacturers?
How long before they are?

The BestBuy guys are clueless. I use a Logitech BT Tablet keyboard with my iPad 4 - used it before with iOS 6 and use it now with iOS 7 and it works just fine.
A simply thing to try is to remove the BT pairing, reset your iPad (hold the on/off/sleep button and the home button at the same time until the Apple boot logo appears), then try repairing them. You may have to force the keyboard back into pairing mode (on mine, there is a button on the underside, near the on/off switch, that I would press and hold for second or two to force pairing mode).

Macbook and linsys wrt54g v5 wireless router

I was getting random lockups when my macbook used my wireless router. I did some research on the internet and discovered it was a very common problem. There were various solutions that seemed to work for people, but I figred one out that is very easy to do. I changed a setting in the wirless section of my router under the advanced settings.. original value for beacon interval was 100 msec I changed it to 90 msec and all is working well. No lockups on the router in 2 days so far. My firmware version on the router is 1.02.0 .
Hope this helps someone.
Does anyone know how I can change these same settings on the macbook?
Jeff
macbook black Mac OS X (10.4.9)
macbook black Mac OS X (10.4.9)

i traded with a friend of mine for a wrt54g v4 router so i could use hyperwrt firmware instead of being stuck with the linksys firmware. there was nothing compatable with v5 and i had the same problem,no problems anymore tho. v5 does suck tho, no problems with the macbook.

I have recently got a new windows lap top and transfered by itunes library to it successfully. i cannot however sync downloads to my ipod classic and my lap top is not recognising the ipod at all. Please help ! Thank you.

I have recently changed lap tops and moved my itunes library successfully.
However I cannot now synce my ipod classic with the new windows pc.
The lap top is not recognising the ipod.
I have spoken to apple and they think its a settings issue on my pc ? I have fully deleted and then reinstalled itunes .
can any one help ? This should be easy to resolve but appears to be a common issue when looking on the web.
Thank you

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

My mother and I share an iTunes account and library on our pc at home. I recently got a MacBook Pro for college and I want to put my music on my new laptop. What is the best way I should go about that?

any help you guys can give would be great! I have a limited amount of time to do this.

Copy the entire /Music/iTunes/ folder on your PC to /Music/ on your Mac.
Then delete what you don't want.
You will need to authorize yrou computer for the iTunes account yoru mother has.
You should create & use your own iTunes account for any more purchases.
You don't need to export anything and definitely don't need to (and shouldn't) convert anything.

Hi guys, I recently got a WRT54G v5 wireless router, and...

Similar Messages

Maybe you are looking for