Hi Guys, I want to know about "p_datetrack_update_mode ' when it will works

Hi Guys,
i am beginner on Oracle apps HRMS.
so,I want to know about, 'p_datetrack_update_mode 'in HR_ASSIGNMENT_API.update_emp_asg_criteria when it will works.
i know types of 'p_datetrack_update_mode ' are 1> 'UPDATE' 2>'CORRECTION' 3> 'UPDATE_CHANGE_INSERT'
i want know about these three modes will work in oracle applications based on sysdate.
regard,
Dhanush.
Edited by: Dhanush on Apr 9, 2012 12:18 AM

Hi Dhanush,
You can go through the links below -
ORA-20001: DateTrack update not allowed for a record which started today
http://oracledocs.wordpress.com/2009/06/22/hrms-date-track/
Cheers,
VB

Similar Messages

I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it say "! not delivered" in red mark.How can I fix this problem??

I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it says "! not delivered" in red mark.How can I fix this problem??

Perhaps something in this support article will help:
http://support.apple.com/kb/TS2755
Regards.

I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

I am having issues with 360 degree rotation, I have an iPhone 5 and ios 6.0.2. I have read alot about this issue online and I found out that my issue is software. I want to know if and when apple will fix this issue?

I had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged....

I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine

I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine
and if it yes i want to know if i have 1TB hard disk to use the 500gb for time machine and the other 500gb for normal use

thank you very much because i am considering to buy the porsche design hard disk 1TB and i want to have it for normal use and for time machine is a pitty to give 1TB for back up only again thanks and i know seperate the back and the working jobs are better but the i have to have 2 hardisks and i want only 1

HT1349 I want to know about the service of my computer with a serial number CO2GG9LCDJWT

I want to know about the service of my computer with a serial number CO2GG9LCDJWT. As I recall, I bought the service for three years...

Are you perhaps trying to reach Apple Support?
We are all users here, just like you.
Contact Apple Support here:
http://www.apple.com/support/contact/

Hi Gurus, I want to know about SAP Insurance Certification course

Hi Gurus,
I want to know about SAP Insurance Certification course. Can anyone guide me how to proceed.
Regards
Raghu

Hi Raghu,
Check this link.... https://training.sap.com/in/en/curriculum/sfi_ins-sap-for-insurance-g-en
This will give high level view of the available certifications in this space.
Regards,
Sanijan

Want to know about User exit in detail

Hi ALL,
I M NEW TO sap ABAP. I WANT TO KNOW ABOUT USER EXIT IN DETAIL. PLS DO THE NEEDFUL . If there are eny document regarding this pls mail to this id [email protected]
thanks and regards
Nandha

Hi Nanda,
Welcome to SDN,
Userxits allow us to add our own functionality to SAP standard program
without modifying it . These are implemented in the form of subroutines and hence are also known as FORM EXITs. The userexits are generally collected in includes and attached to the standard program by the SAP.
User exits are used when the flow for a particular transaction has to take some other route other then the normal flow. this can be the case when you have to attach some additional functionality lik u need a customised screen, or new functionality (using a functional module). based on these things user exits can be classified as screen exits, function module exits, field exits( not used anymore). hope this gives some help on userexits.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
For More information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm

Want to know about SAP course and SAP modules

I am Sandeep, done BBM and have 3 years experience as Medical Representative(Pharma sales), and i'm perusing MBA in Sikkim Manipal University Distance Education, i came to know that SAP course has lot of scope in major industries, so that want to know about SAP course and SAP modules available and which module is suitable for me and details about the cost, duration of course please guide me
Message was edited by: Colleen Lee - moving from Careers space to Training and Education.Also removing the bold text formating

Ashok,
Hi! Excellent that you are take the next steps in your education and applying them to work experiences.
The best approach in taking SAP-related courses is to contact the university and confirm their approach. View SAP UA member schools here - http://uaaroundtheworld.informatik.tu-muenchen.de/overview(bD1lbiZjPTEwMQ==)/start.htm
...and assess the ones in the UK which does include Brunel.
Ask if they provide SAP-related curricula (or supplements) and hands on SAP software in this course or others that you can take in your program.
Best regards,
Richard

I want to know about two year contract

hai i am sudharsan i am want to know about the two year contract of iphone 5s @99$ at uk but i bought that but i have to go to india for a month .just expalin about that for me

Ask the carrier. The contract is with the cellular carrier, not Apple.

I want to know about 4G LTE will be worked in Abu Dhabi or not? I have purchased recently.

I have purchased a I phone 6 64 GB and it will be delivered by Oct-23 to 28. I dont know about 4G LTE means. I want to know whether this technology can be worked in Abu dhabi or not? or i should have to stop delivery. I am very much helpful if you give answer at earliest. Thanks

You have to ask the carrier that you'll be using in your country whether they support 4G/LTE.
If you order iPhone from a different country then it's a different story.
LTE read here:
http://en.wikipedia.org/wiki/LTE_(telecommunication)

I want to know about ehs module and flow

hi,
This is kishore. I have been assigned to ehs module. i want to know about that how it helps industries and flow of the module.
K. Kishore

hi kishore
Please go thru this link
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/EHSSAF/CAGTFADM-EHS.pdf
reward points if it is helpful.
Regards
Alfred

I want to know about enterprise soa and sap netweaver

Hi all,
i am ABAP'r , i want to know about Enterprise SOA And SAP Netweaver ,
please send some documents about that .
Thanks&regards.
Naveen Kumar

ESOA mean Enterprise Service Oriented Architecture
SOA mean an Architecture approach to define IT solution for business problems using loose couples SERVICES
Service mean: definition of a business function in terms of the service message, protocol and nature
Nature mean Service direction, Service mode and service contract
WEB SERVICE, XML, XSD, SOAP : Mean a technology following SOA architecture approach to IT enablement of a business need.
WEB service compose business functions, location of services, messages of service offering and protocol into a single definition to define service contract.
XML mean a common language to represent message
XSD mean a common way to define message structure
SOAP mean a procol which carry messages of services between service consumer and service provider.
Finally : Web service is not SOA. Web service is a technology implementing SOA architectural approach to IT enablement of a business NEED.
Note: If you are happy with answer please make sure point is rewarded.
Thanks

I want to know about smartforms

hi experts tell me
i want to know about smartforms
anybody have material pls send me
thanks in advance

SAP Smartforms can be used for creating and maintaining forms for mass printing in SAP Systems. The output medium for Smartforms support printer, fax, e-mail, or the Internet (by using the generated XML output).
According to SAP, you need neither have any programming knowledge nor use a Script language to adapt standard forms. However, basic ABAP programming skills are required only in special cases (for example, to call a function module you created or for complex and extensive conditions).
1. Create a new smartforms
      Transaction code SMARTFORMS
      Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
      First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
      Here, you can specify your title and page numbering
      &SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
      Main windows -> TABLE -> DATA
      In the Loop section, tick Internal table and fill in
      ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name    Type assignment   Reference type
ITAB1               TYPE                  Table Structure
Global definitions
Variable name    Type assignment   Reference type
ITAB2               TYPE                  Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
        IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
                    http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
        INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
   MOVE-CORRESPONDING MKPF TO INT_MKPF.
   APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
    formname                 = 'ZSMARTFORM'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
    FM_NAME                  = FM_NAME
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3.
if sy-subrc <> 0.
   WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
CONTROL_PARAMETERS         =
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO       =
JOB_OUTPUT_INFO            =
JOB_OUTPUT_OPTIONS         =
TABLES
    GS_MKPF                    = INT_MKPF
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5.
if sy-subrc <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
also refer
http://www.erpgenie.com/abap/smartforms_detail.htm
http://www.sap-basis-abap.com/abphy.htm
<b>http://sap.ionelburlacu.ro/sap0/sapsf001.htm
http://www.ionutz.ro/sap/sapabap01.htm[very imp links]</b>
http://www.sap-basis-abap.com/sapsf001.htm
regards,
srinivas
<b>*reward for useful answers*</b>

I want to know about change pointers generally we have C,R,N change pointers

I want to know about change pointers generally we have C,R,N change pointers
where they are configured

IHi Virender,
I don´t think you can create new methods.
There are 4 methods:
N – New order created [New]
C – Order changed [Changed]
D – Order deleted or partially deleted [Delete]
R – Complete order deleted [Removed]
Please read the following document about Change Pointer:
Processing Change Pointers - Integration via APO Core Interface (CIF) - SAP Library
Read SAP note about CIF and Change Pointer administration.
563806
- FAQ: APO CIF
Kind Regards,
Mariano

I want to know about ATP check requirement .generally we assigned yes or no while creating sales order

I want to know about ATP check requirement .generally we assigned yes or no while creating sales order what it means when we give Yes or No. how pegging flows
Regards
virender

Virender,
Can you be a bit more specific about ".....generally we assigned yes or no while creating sales order....." Exactly what field(s) did you 'assign'? Screenshots would be helpful.
With respect to pegging; in general, ATP has very little to do with pegging. Pegging is more of a planning concept, and not an 'availability checking' concept. There are a few exceptions in APO, but they are not commonly implemented.
Can you elaborate about exactly what you want to know with respect to 'pegging' and ATP?
Best Regards,
DB49

Hi Guys, I want to know about "p_datetrack_update_mode ' when it will works

Similar Messages

Maybe you are looking for