Hi, help needed in shutting down Apple Discusions

Hullo there, I have contributed to Apple Discussions for many years and I like the new format a lot!
However, I find I am getting dozens of emails each day, and nothing seems to shut them off!!
I have tried Preferences and Notifications ........all to no avail!!
I do find the constant emails interesting but, overwhelming!!!
How can I shut these off?
A frustrated Ron
Thanks

I think you'll need to go to the specific discussion and in the upper right you can click to not receive email notifications.
To go to a lot of your previous postings you can click on your username and click "your stuff", then click on each discussion down the list and disable the email notification for it.

Similar Messages

  • What's happening when i turn on my laptop it's blinking, I need to shut down or restart again. Please help!

    What's happening when i turn on my laptop it's blinking, I need to shut down or restart again. Please help!

    Hello Melophage,
    Thanks. Done..:)
    BTW, I got another issue, hope can help me, I'm updating my OS X maverick to new one 10.9.2, while updating I need to restart my laptop to update, however i got this error message, "Install Failed! OS X could not be installed on your computer. The installer encounter an error that caused the installation fail. Contact the software manufacturer for assistance. Click Restart to restart your computerand try installing again." I did that so many times, unfortunately, nothing happens. This is the 1st time Ive ever encounter that issue while updating my Mac. Now, i cannot even go to my main menu, coz everytime I turn on my laptop it's shows the updating process and go back to failed installation. Thanks.

  • I keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

    i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

    I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
    that's an odd sort of a message (or series of messages).
    hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
    try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
    Using MSCONFIG to troubleshoot conflicts in Windows
    does QT open without the strange message after the selective startup?
    does iTunes launch properly?

  • I did an upgrade from 4.0 to the new 6.0 about 5 months ago. After the upgrade installed it said reboot system to apply upgrade. Now it wont open and keeps telling me that the older version needs to shut down the computer and upgrade the old version.

    Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

    Look at original question. When I did the download to the new 6.0 it said everything was fine. Then when I tried to use the firefox again it said an older version needed to shut down my computer so that it could upgrade the old version. It wont let me do anything and all it says is shut down computer so old version can upgrade. It wont let me open the program or remove it or anything. PLease help me with this. I really like Firefox but this has been going on for 5 months now and I still dont get answers from you. How do I fix this???

  • I close Firefox session and then try to open a new browser window - get message that Firefox is still running and I need to shut down and restart. Need a solution

    I close a Firefox browser and at a later time want to open a new browser window but get message "Firefox is still running and I need to shut down before I can open a new session" I do not want to shut down as this is laborious - I can go into task manager and processes and click on Firefox and end session that way but this is not the solution. Firefox seems to be running in background but I cannot open a new session window without doing on of the above.

    Have a look at this post, see if it is of any help (though related to Vista, but same issue can be there with Window 7 also)
    http://www.vistax64.com/browsers-mail/265937-firefox-exe-still-running.html

  • Rogue video email shuts down Apple Mail, cannot delete

    I received a video email from a friend that shuts down Apple Mail within a few seconds of opening. The delete button is grayed out and I am unable to delete. I deleted it from web-based mail, but it still opens with Apple Mail--then shuts down the application. I have shut down the computer and logged off repeatedly, to no avail. (I am also afraid my mailboxes have been emptied--apart from the rogue email.) Have I lost Apple Mail on this computer forever? Can anyone help?

    I received a video email from a friend that shuts down Apple Mail within a few seconds of opening. The delete button is grayed out and I am unable to delete. I deleted it from web-based mail, but it still opens with Apple Mail--then shuts down the application. I have shut down the computer and logged off repeatedly, to no avail. (I am also afraid my mailboxes have been emptied--apart from the rogue email.) Have I lost Apple Mail on this computer forever? Can anyone help?

  • Premiere keeps quitting after start up, "a serious error has occured and needs to shut down" ?

    Hi there, I've been cutting a job over the last week and recently PP has been quitting and I get "a serious error has occured and pp needs to shut down".
    I've reinstalled pp and to no avail.
    even with new projects the same happens.
    I have a crash report if that helps.

    Hi corey maynard films,
    Thanks for sharing the crash report, I have checked and found that you have two cards
    1. Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 1024 MB
    2. Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Please goto System Preferences - Energy saving and Uncheck Automatic graphics switching box.
    and let us know if this fix the issue.
    Thanks,
    Sandeep

  • Do I need to shut down my iMac (intel) before attaching an external HD?

    Hi
    Should I be shutting down my iMac before plugging in an external HD (LaCie).  It'll go to the FW800 or eSata port.
    Thanks
    Allen

    You certainly don't need to shut down your computer at all, but remember that when you want to remove the external drive, make sure you either drag its icon to the trash or use the eject ⌘ e command.

  • On my new iPhone 4S, I periodically get a "Sim failure" message and I loose my Verizon connection. To get service back I need to shut down the phone and start it up again.

    On my new iPhone 4s, I periodically get a "Sim failure" message and I loose my Verizon connection. To get service back, I need to shut down my phone and restart it.

    Have you tried removing and replacing the SIM? If that doesn't work, try a new SIM from Verizon, they will usually swap them out for you for free. If those don't work, you might need to get the phone checked out, it may have a bad SIM port.

  • Frequent "Firefox has encountered a problem and needs to shut down" window. Need to disable adblock plus and AVG safe search to continue. Any way to fix?

    For about a third of websites I visit, at some point I receive a "Firefox has encountered a problem and needs to shut down" window. I have to disable both Adblock plus and AVG safe search in order to continue. This used to happen for two or so sites, and I disabled the ad-ons before going to those sites. It has increased to the point that the adblock plus and safe search ad-ons are becoming pretty useless. Is there any way to rectify this problem. Sending error reports has no effect.

    soytuyosimeamas wrote:
    I tried to update but it would not allow me to update, isn't that odd!?
    Have you changed anything in the Photoshop installation areas?  If the updater doesn't find a pristine installation it will fail.
    The only area you should ever put anything into is the plug-ins subfolder.  Everything else is hands-off.
    -Noel

  • Firefox.exe has encountered a problem and needs to shut down

    1.After opening & using Firefox for about 5 minutes the message "firefox.exe has encountered a problem and needs to shut down" is displayed & Firefox is closed.
    2.Also,I selected the option to restore Firefox from the last session while closing, but Firefox always starts with a new page.I lost all the previous tabs

    I was having this problem few days ago,and I have fixed.Try this steps-If you have AVG antivirus so go on firefox>Tools>Add On and Disable AVG safe search and AVG tool bars too.Then restart computer.

  • Help needed to track down Problem in tiger with Pioneer DVR-110D

    ok as i stated in another topic i own a Beige G3 AIO that is running OS 9.2.2 and OS X 10.4.8 and i have done allot to this system to get it to run faster and to run properly.
    part of this setup has a Pioneer DVR-110D it there and when i bought it i was running OS 9.2.2 only. at first i could not burn anything with it cause it wasn't supported and when i went to put the system to sleep it would freeze when i would wake it up it never did this before i installed the drive so i knew what was causing it.
    i turned off HDD sleep and the problem was fixed. but i didn't like the ideal of having the hdd running all the time when idle. me and a friend was talking about optical drive issues and he said he found this driver replacement for the apple cd/dvd driver called intech speed tool's 6.0 for OS 9.2.2 and that i should give it a try cause it fixed a few problems for him.
    i downloaded the demo of it and installed it and i turned on hdd sleep and put the system to sleep and woke it back up and the system was running great. so now the wake up freeze problem was cured. but still no burn support. so after a few weeks of posting on here about the problem some one came by and said he knew what the problem was and sent me a modded PioneerCDR authoring support extension. i installed it and rebooted and opened iTunes and iTunes showed Pioneer DVR-110D as the devise to burn to. so i tryed it and behold it burned a audio cd with no problems.
    later i bought a western digital SE 120gb hdd and installed it and partitioned it 3 times a 8gb first partition for OS X a second partition 10gb for OS 9.2.2 and the 3rd partition was the rest of the drives size for shared data and storage. the hdd worked great with no issues so it was time to try OS X on this system cause i was waiting to get a large HDD to do so.
    i figured that the Pioneer drive would not boot the OS X jaguar cd and is a known problem with non apple cd rom drives. so i took out the Pioneer and reinstalled the apple 24x stock cd rom drive. and the jag install cd booted without a hitch. Jag installed and was running so i updated to 10.2.8 and found out the internal screen kept going out and locking the system up. so i searched this forum for the onboard video blackout and came across the terminal work around to get the system to behave itself with having more than 192mb ram installed. i rebooted and all went fine afterward.
    i reinstalled the Pioneer drive and went to testing it all was fine everything mounted on the desktop that i put in the drive. but i lacked the ability to burn with the drive cause still the drive wasn't supported be the system so i searched the forum and came across the program called patchburn. i downloaded it and ran it and patched the driver to support iApps burning with this drive. so i put in a blank cd and went to burn in iTunes it burned flawlessly so i tryed a dvd-r with the finder it to burned flawlessly.
    o loved playing a game planeshift and then they stopped supporting 10.2.8 so i went to buy the tiger install cd's. i already knew the Beige G3 was not a supported version of Os X on this system and you had to use xpostfacto 4 to install tiger on this system. so i did what i had to do to install tiger on the system and selected use old NDRV and selected to install tiger. which installed some files to boot tiger and rebooted yet again the Pionner drive refused to boot the install cd's . i got mad and held down the command option power key's for about 10 seconds and let off. the tiger installer booted and got to where it started to copy the files to the hdd and stalled out and the drive spun down never to spin back up or show signs of life so i powered down the system and removed the pioneer drive and put the stock 24x cdrom in and installed tiger.
    after tiger was installed i shut down the system and installed the pioneer drive. and powered back on and it was in verbose mode showing what was going on one part showed that the Pioneer drive was detected but had no kernel dependencies and continued to boot. i went to repair the permitions when the onboard video went blank and the system locked up. i rembered that 10.2.8 did the same thing so i tried the 10.2.8 screen blackout fix in 10.4 and rebooted. the onboard video didnt come on but since i had a ATI Radeon 7000 i could work around in tiger to update to 10.4.7 at the time. i first repaired permitions and then ran software update and updated everything and rebooted. the onboard video came back on allong with the ATI Radeon 7000 which being used as boot video device and shown the gray apple logo with the spinning pin wheel at the bottom.
    so far tiger was running great so i put a disk in the drive and nothing it didn't mount anything so i ejected it with the button on front of the drive and tryed a dvd movie and got the same nothing as with the cd. so i rebooted with the dvd in the drive al behold tiger mounted the dvd but as soon as i would try to do anything with it the drive would stop and i would have to reboot the system to gain the drive back so i can repair permissions. and never tryed to use the drive again
    10.4.8 update came out i updated to it using software update and rebooted. the update went flawless so i thought to myself what if the pioneer drive worked now. so i put a cd in the drive and it mounted the disk. then i ejected it with amazement and put a dvd in and it to mounted. so i tryed to play the dvd and it played the dvd to the end of the movie. i took out the dvd and rebooted. i tryed to put the dvd back in but it didnt mount. which ****** me off as to why it was just working and now its not.
    i rebooted and the dvd mounted as soon as the desktop showed up so i tried to play it but this time it only played for about 10-13 minutes before the drive stopped spinning which made dvd player stop responding which made me have to force quit the dvd player and try to restart which gave me a kernel panic. so i forced restarted (got a forum to send to apple to report the KP so i did) and the dvd mounted once again as soon as the desktop showed so i ejected the dvd and put a audio cd in and it mounted and i played the hole cd. so i ejected that and put a blank cd in and treed to burn and it got to 30% and then the drive spun down and made the disk utility stop responding. so i forced quit disk utility and rebooted. once it rebooted nothing popped up so i pressed the eject button on the drive and the cd r came out.
    the OS X 10.4.8 update made the drive more stable but still wont burn anything. some times it will still not mount anything, some time it will not play anything, and still fails to copy files over to the hdd. so now im left to believe its a driver issue some where since this drive worked so flawlessly in jaguar and OS 9 but fails to work properly in tiger.
    i looked in the extensions in ASP in 10.4.8 and there is a few extensions showing errors. i made a list of them to show
    PatchedAppleNVRAM:
    Version: 3.0
    Last Modified: 8/9/05 6:07 PM
    Location: /System/Library/Extensions/PatchedAppleNVRAM.kext
    kext Version: 3.0
    Load Address: 0x4db000
    Valid: Yes
    Authentic: Yes
    Dependencies: Incomplete
    Dependency Errors:
    com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
    Integrity: Unknown
    OpenPMUNVRAMController:
    Version: 2.0
    Last Modified: 8/9/05 6:08 PM
    Location: /System/Library/Extensions/OpenPMUNVRAMController.kext
    kext Version: 2.0
    Load Address: 0x63a000
    Valid: Yes
    Authentic: Yes
    Dependencies: Incomplete
    Dependency Errors:
    com.macsales.iokit.OpenOldWorldNVRAM: No valid version of this dependency can be found
    Integrity: Unknown
    GossamerDeviceTreeUpdater:
    Version: 3.0
    Last Modified: 8/9/05 6:07 PM
    Location: /System/Library/Extensions/GossamerDeviceTreeUpdater.kext
    kext Version: 3.0
    Load Address: 0x63d000
    Valid: Yes
    Authentic: Yes
    Dependencies: Incomplete
    Dependency Errors:
    com.macsales.iokit.OpenPMUNVRAMController: No valid version of this dependency can be found
    Integrity: Unknown
    that is the list of extensions that are reporting some sort of errors. at first i was figuring it was a problem with the driver for the Pioneer drive but my friend brought over his digital audio G4 which was also running 10.4.8. and we decided to try the drive in his Mac to see if there was any problems. it mounted everything we threw in it. it played dvd's great and played audio cd's great, it copied files over to the hdd without fail. it even burned a flawless cd. ok now the ideal of the driver for the drive was thrown out the window. so it has to be something else causing the problem. either a driver for a part on the motherboard or what i have no clue.
    im just wondering what driver it would be causing a problem not allowing the Pioneer drive to work properly. cause its not the drive being bad cause it worked flawlessly in OS 9.2.2 and jaguar and in tiger in my friends digital audio G4
    im just wondering if anyone might know what could be done to fix this problem cause i know it can be fixed but i don't know where to begin or how. so i ask you how could i begin to fix this
    thank you all for baring with me and reading all this. i know i wrote allot but i had to explain what was going on before i could ask for help so you could better understand what was going on. i have already updated the firmware to the latest with no change the firmware use to be the old 1.11

    yea i have along time ago and also made a update to xlr8's drive database. cause i fixed the problems with the drive in OS 9.2.2 (AKA no burn support with the built in burning app or iTunes, now have full support for burning with the finder burn and iTunes thanks to a edited PioneerCDR authoring support extension that someone edited for me. found out that the Apple CD/DVD driver extension was at fault for the locking up on wake up with hdd sleep enabled that started when i installed the Pioneer drive. fixed with intech CD/DVD speedtools 6.0).
    When i did the first report on the drive database on xlr8yourmac i reported what problems i was having in OS 9.2.2 and i think i reported that i had no problems in jaguar, and was trying to obtain a driver or something to try to get it to work. but to no avail at first. after i fixed the problems i did a update report
    in jaguar the drive had no problems but no burn support. installed patchburn and the drive worked 100% in jag no problems what so ever. im thinking it has somthing to do with one or all of the extensions with errors but i can be wrong.
    i just wonder where ryan has been on the forums in OWC's site. cause i would like to submit my crash log panic log and the extensions with errors so he could help track down the problems to see if it cant be fixed. but ive tried emailing him but no replay's. and his last reply on the OWC forums was back in desember 2005 a few day's over a year
    i know it isnt the drive cause it worked flawlessly in tiger 10.4.8 on my friends Digital Audio but i know why it worked fine cause it has the proper files for the DA to work cause its a supported system. i would like to try to help to get xpostfacto to work better on the Beige G3 system
    in tiger if it is something to do with xpostfacto

  • I tried to download picture/video files from iPhone 5S to MacBook Pro but it won't stop importing and I don't have phone connected.  I need to shut down the computer and I can't stop the import from spinning

    I tried to import picture/video files from iPhone 5S to MacBook Pro Aperature.  It appeared to be trying to download every picture I have ever taken even tho I checked do not import duplicates.  The phone is not connected to lap top.  It has been spinning for 1/2 day.  I can't stop it. I can't shut down the computer. How do I stop the import and shut computer down.

    Hey L. DENISE,
    I recommend that you use the following article to help you address this issue:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Help please - occasional shut-down after sleep & kernel panic

    Hi all.
    I have an intermittent problem here with an iMac 24in 2.66Ghz Intel Core 2 Duo model. This iMac was bought refurbished from the Apple store about 6 weeks ago.
    About once a week, after putting the iMac to sleep, I come back to it later to find it has shut down. The only way to restart is to unplug from the wall and then plug in and switch on as normal.
    This has happened on three occasions in the last couple of weeks, and by looking in System/Library/Logs/Diagnostic Reports I found what looks like a record of a kernel panic:
    Interval Since Last Panic Report: 212782 sec
    Panics Since Last Report: 1
    Anonymous UUID: 78A693FE-D742-4CE4-8B70-71AEA8969BD7
    Mon Nov 2 09:06:27 2009
    panic(cpu 0 caller 0x1153324): "pmExitHaltToOff: CPU 1 not in LCPU_HALT(5)"@/SourceCache/AppleIntelCPUPowerManagement/AppleIntelCPUPowerManag ement-90/cstateCPU.c:2068
    Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
    0x5877bcc8 : 0x21acfa (0x5ce650 0x5877bcfc 0x223156 0x0)
    0x5877bd18 : 0x1153324 (0x11603ac 0x1 0x5 0x120)
    0x5877bd58 : 0x2aeb5d (0x5279e0a4 0x0 0x5877bd88 0x4fe457)
    0x5877bd88 : 0xef36c8 (0xef31d2 0x3 0x0 0x221bd7)
    0x5877bda8 : 0xef6b4e (0x814b000 0x2 0x0 0x8156080)
    0x5877bdc8 : 0x55c367 (0x817ac80 0x860720 0xffffffff 0x0)
    0x5877be18 : 0x571d45 (0x814b000 0x15 0x5877be48 0x4fa0a0)
    0x5877be78 : 0x53db00 (0x7fc3400 0x4 0x1d 0x2)
    0x5877beb8 : 0x53dbe1 (0x7fc3400 0x9647700 0x5877bee8 0x80e4e00)
    0x5877bed8 : 0x5433ef (0x7fc3400 0x88de480 0x0 0x5404c5)
    0x5877bf28 : 0x53af2f (0x7fc3400 0x88de480 0x80e4e00 0x57192e)
    0x5877bf58 : 0x54707a (0x80e4e00 0x1 0x5877bf88 0x546c31)
    0x5877bf88 : 0x5474d4 (0x8129440 0x8f29000 0x58cfdc 0xffffffff)
    0x5877bfc8 : 0x29c68c (0x8129440 0x0 0x10 0x8e6eba0)
    Kernel Extensions in backtrace (with dependencies):
    com.apple.driver.AppleIntelCPUPowerManagement(90.0.0)@0x1151000->0x1168fff
    com.apple.driver.AppleACPIPlatform(1.3)@0xee9000->0xf29fff
    dependency: com.apple.iokit.IOACPIFamily(1.3.0)@0x91e000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x932000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10B504
    Kernel version:
    Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
    System model name: iMac9,1 (Mac-F2218FA9)
    System uptime in nanoseconds: 212722738568754
    unloaded kexts:
    com.apple.driver.AppleUSBEthernetHost 2.0.0 (addr 0x58772000, size 0x16384) - last unloaded 123544687746330
    loaded kexts:
    com.apple.filesystems.webdav 1.6 - last loaded 201550497698325
    com.apple.driver.AppleHWSensor 1.9.2d0
    com.apple.driver.AppleMikeyHIDDriver 1.1.7
    com.apple.driver.AppleHDA 1.7.4a1
    com.apple.driver.AppleMikeyDriver 1.7.4a1
    com.apple.driver.AppleUpstreamUserClient 3.0.5
    com.apple.driver.AppleLPC 1.4.6
    com.apple.driver.AGPM 100.8.15
    com.apple.driver.AppleIRController 161
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
    com.apple.driver.NVSMU 1.1.7
    com.apple.GeForce 6.0.2
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.iokit.CHUDUtils 201
    com.apple.iokit.CHUDProf 212
    com.apple.driver.AppleBacklight 170.0.2
    com.apple.driver.AudioIPCDriver 1.1.0
    com.apple.iokit.SCSITaskUserClient 2.5.1
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.driver.AppleFWOHCI 4.3.4
    com.apple.nvenet 1.0.58
    com.apple.driver.AppleUSBHub 3.7.8
    com.apple.iokit.IOAHCIBlockStorage 1.6.0
    com.apple.driver.AppleUSBEHCI 3.7.5
    com.apple.driver.AirPortBrcm43xx 410.91.20
    com.apple.driver.AppleAHCIPort 2.0.0
    com.apple.driver.AppleUSBOHCI 3.7.5
    com.apple.driver.AppleHPET 1.4
    com.apple.driver.AppleEFINVRAM 1.3.0
    com.apple.driver.AppleRTC 1.3
    com.apple.driver.AppleACPIButtons 1.3
    com.apple.driver.AppleSMBIOS 1.4
    com.apple.driver.AppleACPIEC 1.3
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
    com.apple.security.sandbox 0
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.0.11
    com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
    com.apple.driver.DspFuncLib 1.7.4a1
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleSMBusController 1.0.2d0
    com.apple.driver.AppleHDAController 1.7.4a1
    com.apple.iokit.IOHDAFamily 1.7.4a1
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.nvidia.nv50hal 6.0.2
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.driver.IOPlatformPluginFamily 3.4.0a20
    com.apple.NVDAResman 6.0.2
    com.apple.iokit.IOSurface 73.0
    com.apple.iokit.IOBluetoothSerialManager 2.2.1f7
    com.apple.iokit.IOSerialFamily 10.0.2
    com.apple.driver.AppleSMC 3.0.1d2
    com.apple.driver.AppleSMBusPCI 1.0.2d0
    com.apple.iokit.CHUDKernLib 203
    com.apple.iokit.IONDRVSupport 2.0
    com.apple.iokit.IOGraphicsFamily 2.0
    com.apple.iokit.IOAudioFamily 1.7.0fc16
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.iokit.AppleProfileFamily 40
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.2.1f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.2.1f7
    com.apple.iokit.IOBluetoothFamily 2.2.1f7
    com.apple.driver.AppleUSBHIDMouse 1.3.0f1
    com.apple.driver.AppleHIDMouse 1.3.0f1
    com.apple.iokit.IOUSBHIDDriver 3.7.5
    com.apple.driver.AppleUSBMergeNub 3.7.5
    com.apple.driver.AppleUSBComposite 3.7.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.1
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.iokit.IOFireWireFamily 4.1.7
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOAHCISerialATAPI 1.2.0
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.1
    com.apple.iokit.IOUSBUserClient 3.7.5
    com.apple.iokit.IO80211Family 300.20
    com.apple.iokit.IONetworkingFamily 1.8
    com.apple.iokit.IOAHCIFamily 2.0.0
    com.apple.iokit.IOUSBFamily 3.7.8
    com.apple.driver.AppleEFIRuntime 1.3.0
    com.apple.iokit.IOHIDFamily 1.6.0
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 281
    com.apple.iokit.IOStorageFamily 1.6
    com.apple.driver.AppleACPIPlatform 1.3
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    System Profile:
    Model: iMac9,1, BootROM IM91.008D.B08, 2 processors, Intel Core 2 Duo, 2.66 GHz, 4 GB, SMC 1.45f0
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.10.91.19)
    Bluetooth: Version 2.2.1f7, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: WDC WD6400AAKS-40H2B0, 596.17 GB
    Serial ATA Device: OPTIARC DVD RW AD-5670S
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0x24400000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
    USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1002, 0x04300000
    USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0304, 0x04320000
    USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x0205, 0x04310000
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0x06110000
    Since this last one I have reset the PRAM/NVRAM and updated to OS X 10.6.2. Is this likely to help or is there a more fundamental problem here?
    Thanks for any help on this.

    HI,
    "AppleIntelCPUPowerManagement-"
    First, try resetting the SMC. (System Management Controller)
    http://support.apple.com/kb/HT1543
    Considering this iMac is well within the one year limited warranty, I'd take it back if resetting the SMC does not work. You should not have to trouble shoot kernel panics whether it's refurbished or not but read here for help to resolve kernel panics... something might help.
    http://www.thexlab.com/faqs/kernelpanics.html
    If you have installed any 3rd party software / hardware, uninstall and try using the iMac to see if it's stable.
    Carolyn

  • Please help!  Lightroom shuts down and re-starts EVERY time I export a file

    I've used Lightroom for 2 years and it only started happening TODAY!  I need to edit my pictures in photoshop, but I can't get them from Lightroom because every time I hit the export button it starts the process and then my computer shuts down and then re-starts after a few seconds.  Why?  How can I fix it.  I'm a wedding photographer and need these pictures edited!  Any help is appreciated.

    Check in the same folder/directory as your active .lrcat: there should be no xxxx.lock file when LR is quit; there should be one opened when LR is launched. Other than also deleting your Prefs file, perhaps the OS and version of LR would help.

Maybe you are looking for

  • Epson 3880 no longer prints under Lion

    My Epson 3880 printer was working well under Snow Leopard but after updating to Lion on my MacBook Pro a few months ago I haven't yet been able to get the printing to work. The printer is connected directly via USB. If I unplug the printer from my Ma

  • Migration via wireless network

    The migration assistant on the iMac I'm trying to migrate from (B) recognises the MacBook I'm trying to migrate to (A) but when I input the passcode from A into B it spends ages "searching for other computers" and then eventually gives me the boxes f

  • Memory problems MacBook Pro

    I have Parallels installed on my Mac and get the message "no program memory available" when opening Iphoto. Who can help me? Thank you

  • Media suddenly offline, codec problem?

    3 AVI files suddenly went offline after i upgraded from CS4 to CS5 I am unable to find a solution to this myself, anyone out there who can help me? Thank you. <3

  • Status profile Process

    Hi Gurus, I have a scenario and the  requirement is client wants to have "Release order process"(i.e.,status profile) where they want to have three users for which the Sale order need to be approved which we can do in Standard process.I have configur