Hi help needed in Smart form using BAdi ( please any one help me )
Hi,
I am working in SRM.I am new to SRM and smartforms .My problem is I need to change the stndard smarform for BBP_BIDINV_BID into zprogram for The text for Published Bid Invitation email should read as:xxxxwith emp name and date,The text for email when Bid is rejected :XXXx,Accepted,Returned.I need to attch the text using BAdi's .So can any one help me how to find out the suitable BADi to this and please send me process to do the oject..
thanks in advance.
Regards
Uday
Hi,
check this BADI :
BBP_OUTPUT_CHANGE_SF
Regards
Appana
Similar Messages
-
i bought an iphone5 from saudi arabia,can i use it in india?is there any requirements i have to take?many one are saying i need to unlock it,please any one help me,i did'nt activate my phone yet.
If the phone is unlocked then you can use it in India.
If your phone is locked, then the only way to get the phone unlocked is to contact your phone company/carrier. The person that sold you the phone in Saudi should have told you whether it was locked or unlocked. Contact them to check and then contact the carrier to have it unlocked if it is locked.
Other than that there is not a lot that you can do - perhaps it was unwise to purchase a phone in Saudi - it won't have Facetime on it if you got it there. -
While executing TCode F13 and F13E, purchase order number is not appearing.how it should be displayed into tcode f.13, what are the requirements need to display into tcode f.13, please any one help me, i am facing this problem in production server
Hi Nattu,
Please check it will show the PO no under Purchasing doc field
Check which layout you are applied.
its should be
SAP&F124
Without Specification of Crcy
Regd,
Khan. -
Hi,
I am prasanna.Please any one help me how to write case statement in dashboard prompt sql results.
Thanks inadvance
prasanna UndapalliHi,
While creating the dashboard prompts, you should be able to see 'Show' option which would have 'All Values' as Default. Change to SQL Results-
For example- I have taken Customer Status from the samplesales RPD . So the result would come as -SELECT "D1 Customer"."C2 Cust Status" FROM "Sample Sales"
Now modify the SQL as per requirement.
For Example- SELECT case when 1=1 then 'YTD' else "D1 Customer"."C2 Cust Status" end FROM "Sample Sales"
union SELECT case when 1=1 then 'QTD' else "D1 Customer"."C2 Cust Status" end FROM "Sample Sales"
union SELECT case when 1=1 then 'MTD' else "D1 Customer"."C2 Cust Status" end FROM "Sample Sales"
This is the syntax and in the 'Default to' put the 'YTD' as specific value so that the report shows the report for the 'YTD'.
And dont forget to add presentation variable and refer them in the intermediate reports.
Hope this should solve your problem.
Regards
MuRam -
Hi,
I am trying to send a mail with attachment using jsp but I couldn't receive the attachment. My code is
try{
MimeMessage mm=new MimeMessage(session);
mm.setFrom(new InternetAddress(from));
mm.setRecipients(Message.RecipientType.TO,InternetAddress.parse(to,false));
mm.setRecipients(Message.RecipientType.CC,InternetAddress.parse(cc,false));
mm.setRecipients(Message.RecipientType.BCC,InternetAddress.parse(bcc,false));
mm.setSubject(subject);
mm.setText(message);
Transport.send(mm);
// File attachment
File attach=new File(attachment);
System.out.println("This is the fileattached"+attachment);
if (attach.exists()){
MimeBodyPart mbp1=new MimeBodyPart();
mbp1.setText(message);
MimeBodyPart mbp2=new MimeBodyPart();
FileDataSource fds=new FileDataSource(attachment);
mbp2.setDataHandler(new DataHandler(fds));
mbp2.setFileName(fds.getName());
Multipart mpt=new MimeMultipart();
mpt.addBodyPart(mbp1);
mpt.addBodyPart(mbp2);
mm.setContent(mpt);
}else{
mbp.setText(message);
Transport.send(mm);
System.out.println("Mail was successfully sent");
Kindly any one help me to fix the bug
Thanks for ur help
Regards,
ArunkumarYou are creating a File object called attach but passing attachment to the FileDataSource.
Take a look at the following:
if (!attachmentFile.equals(testString))
int stringLength = attachmentFile.length();
int nameStart = attachmentFile.lastIndexOf("/");
nameStart = nameStart + 1;
String fileName = attachmentFile.substring(nameStart,stringLength);
String newFile = (attachmentPath + "/" + fileName);
File fileData = new File(newFile);
MimeBodyPart mbp2 = new MimeBodyPart();
FileDataSource fds = new FileDataSource(fileData);
DataHandler dh = new DataHandler(fds);
mbp2.setFileName(fileName);
mbp2.setDescription("Attached File:" + fileName);
mbp2.setDisposition(Part.ATTACHMENT);
mbp2.setDataHandler(dh);
mp.addBodyPart(mbp2);
} -
i am opening a new account but it is asking me security questions that my ex wife set up on hers. I am using a different Apple id and differnt email.Very confused please help
You've been hitten by Apple's recent SNAFU. I fear you are SoL until their pending investigation fiasco is over with.
-
events parameters are pass by value (true or false).
True
When you declare an event, you can use the EXPORTINGaddition to specify parameters that are passed to the event handler. The parameters are always passed by value.
http://help.sap.com/saphelp_nw2004s/helpdata/en/71/a8a77955bc11d194aa0000e8353423/content.htm -
Please any one help n this issue
ive done a code
aaa = window.showModalDialog(str,window,"dialogheight:280px;dialogwidth:380px;dialogleft:500px;dialogtop:500px;status: No;");
the window should not be dragged to some other position.it should b static at the same position.hey ive mentioned only the line i got doubt. ive used that line of coding in my jsp page.ok r u clear
-
Please any one help me in this query
i have 6 tables. in my object i have to transfer the data to the internal table i_vbrk. it must include the following fields from the respective fields
vbrk - vbeln, vkorg, vtweg, fkdat,knumv
vbrp - vbeln, matnr, aktnr, arktx, netwr, wavwr
mara - matnr, extwg, matkl
marc - matnr, mmsta
marm - umrez, matnr
konv - knumv, kschl, kposn, kbetr.
please help me in joining the tables to one internal tableHi,
data:begin of it_vbrk occurs 0,
vbeln like vbrk-vbeln,
vkorg like vbrk-vkorg,
vtweg like vbrk-vtweg,
fkdat like vbrk-fkdat,
knumv like vbrk-knumv,
end of it_vbrk.
data:begin of it_vbrp occurs 0,
vbeln like vbrp-vbeln,
matnr like vbrp-matnr,
aktnr like vbrp-aktnr,
arktx like vbrp-arktx,
netwr like vbrp-netwr,
wavwr like vbrp-wavwr,
end of it_vbrp.
data:begin of it_mara occurs 0,
matnr like mara-matnr,
extwg like mara-extwg,
matkl like mara-matkl,
end of it_mara.
data:begin of it_marc occurs 0,
matnr like marc-matnr,
mmsta like marc-mmsta,
end of it_marc.
data:begin of it_marm occurs 0,
umrez like marm-umrez,
matnr like marm-matnr,
end of it_marm.
data:begin of it_konv occurs 0,
knumv like konv-knumv,
kschl like konv-kschl,
kposn like konv-kposn,
kbetr like konv-kbetr,
end of it_konv.
select vbeln vkorg vtweg fkdat knumv
from vbrk
into table it_vbrk.
select vbeln matnr aktnr arktx netwr wavwr
from vbrp
into table it_vbrp
for all entries in it_vbrk
where vbeln = it_vbrk-vbeln.
select matnr extwg matkl
from mara
into table it_mara
for all entries in it_vbrp
where matnr = it_vbrp-matnr.
select matnr mmsta
from marc
into table it_marc
for all entries in it_mara
where matnr = it_mara-matnr.
select umrez matnr
from marm
into table it_marm
for all entries in it_mara
where matnr = it_mara-matnr.
select knumv kschl kposn kbetr
from konv
into table it_konv
for all entries in it_vbrk
where knumv = it_vbrk-knumv.
regards,
sowjanya. -
select fu.user_id,
fu.user_name,
hcp_phone1.phone_number primary_phone_number ,
hcp_phone1.last_update_date cnts_last_update_date,
fu.last_update_date user_last_update_date,
(select hcp_phone2.phone_number
from ar.hz_contact_points hcp_phone2
where hcp_phone2.contact_point_type(+) = 'PHONE'
and hcp_phone2.status(+) = 'A'
and hp.party_id =hcp_phone2.owner_table_id(+)
and hcp_phone2.owner_table_name(+) ='HZ_PARTIES'
and hcp_phone2.primary_flag = 'N'
and rownum = 1
) secondary_phone_number,
(select hcp_email.email_address
from ar.hz_contact_points hcp_email
where hcp_email.contact_point_type(+) = 'EMAIL'
and hcp_email.status(+) = 'A'
and hp.party_id =hcp_email.owner_table_id(+)
and hcp_email.owner_table_name(+) ='HZ_PARTIES'
and hcp_email.primary_flag = 'Y'
) email_address,
hp.person_first_name ,
hp.person_middle_name ,
hp.person_last_name ,
hp.party_name,
hp.person_title ,(
nvl(hp.address1,' ') ||
nvl(hp.address2,' ') ||
nvl(hp.address3,' ') ||
nvl(hp.address4,' ')
) address1,
hp.city,
hp.state ,
hp.country ,
hp.postal_code,
' ' industry_group,
from fnd_user fu,
ar.hz_parties hp,
fnd_user_resp_groups furg,
fnd_responsibility_tl frt,
ar.hz_contact_points hcp_phone1
where hp.party_id =fu.person_party_id
and furg.user_id =fu.user_id
-- and ( to_date(fu.last_update_date,'dd-mm-yyyy') > to_date(nvl(p_in_date,sysdate),'dd-mm-yyyy')
-- or to_date(hcp_phone1.last_update_date,'dd-mm-yyyy')> to_date(nvl(p_in_date,sysdate),'dd-mm-yyyy')
and furg.responsibility_id = frt.responsibility_id
and frt.responsibility_name = 'EMR IBE Customer PSG US'
and frt.language = 'US'
and hcp_phone1.contact_point_type(+) = 'PHONE'
and hcp_phone1.status(+) = 'A'
and hp.party_id =hcp_phone1.owner_table_id(+)
and hcp_phone1.owner_table_name(+) ='HZ_PARTIES'
and hcp_phone1.primary_flag = 'Y';SELECT d.NAME
FROM
(SELECT jta.NAME
FROM apps.jtf_terr_values_all jtva,
apps.jtf_terr_qual_all jtqa,
apps.jtf_terr_all jta ,
apps.hz_party_sites ps,
apps.hz_locations hl
WHERE jtva.terr_qual_id = jtqa.terr_qual_id
AND jtqa.terr_id = jta.terr_id
AND jtva.low_value_char = hl.postal_code
AND jtqa.org_id = jtva.org_id
AND jta.org_id = jtqa.org_id
AND ps.location_id = hl.location_id
AND hl.country in( 'CA', 'US')) D;
UNION
SELECT jta.NAME
FROM apps.jtf_terr_values_all jtva,
apps.jtf_terr_qual_all jtqa,
apps.jtf_terr_all jta,
apps.hz_party_sites ps,
apps.hz_locations hl
WHERE jtva.terr_qual_id = jtqa.terr_qual_id
AND jtqa.terr_id = jta.terr_id
AND ps.location_id = hl.location_id
AND jtqa.org_id = jtva.org_id
AND jta.org_id = jtqa.org_id
AND hl.country = 'US'
AND hl.postal_code BETWEEN jtva.low_value_char AND jtva.high_value_char
)d; -
Help needed for file processing using FTP
Hi All,
I am new to ODI tool and currently we are implementing one project in ODI. Could you please, any one help me on the following requirement... how to implement it?
Scenario:
i) I need to pick a file from remote host 'outbox' dir using FTP process, and place into local 'temp' dir. (I can do it with odiFTPGet tool)
ii) Change the file as per target business requirement.??? ( this step challenging me)
for ex:
if source file name : <project name>_<source ID>_<transaction name>_<unique id>.txt
target name should be : 1234_<transaction name>_<sysdate in yyyyMMddhhmmss>_<unique id>_2345.txt ( here 1234 and 2345 are hard coded values)
iii) Later move to local 'temp' to local 'outbox' dir. ( I can do it with odiFileMove tool)
iv) After successful process move the file from remote 'outbox' to remote 'archive' dir ??? (again this is challenging me).
For this my questions are:
1) How to get file name into a variable ( In one of the post , it says we need to create data model and data stores, and interface to get the file names into a file. apart from is there any easy way i can implement it in package it self?)
2) How to tokenize a long string ( i.e., need to tokenize the source file to get <unique id> and <transaction name> and map to target file name)
3) How to define implementation for Java in user function?? do we need to use class declarations and import statements?? I need a sample user function in Java.
4) How to move/rename a file in remote server?? ( need to move file from remote 'outbox' server to remote archive' dir)
5) If any step in package fails, How to get the error msg into a variable which i can use for sending mail and raise a ticket in remedy?? ( I will pass that variable to as content to mail and remedy ticket)
6) How to handle list type data (string list) by variables in ODI?? (As we can define single variable not as list.)
I am sorry to ask all my queries I a single post. But I need to solutions for all to implement this in my project.
Thanks in advance. Appreciate early response.
Regards,
Kiran.NCan any one share your thoughts for my request.
Thanks in advance.
Regards,
Kiran -
While i integrate crystal And Jsp I got the Error messgae- any one help Me
While i run my jsp ,i can view these error msg in server log file. please any one help to me....java.io.IOException: Unable to recover report source java.io.IOException: Unable to recover report source at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.readExternal(Unknown Source)
at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1207)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
at org.apache.catalina.session.StandardSession.readObject(StandardSession.java:1369)
at org.apache.catalina.session.StandardSession.readObjectData(StandardSession.java:864)
at org.apache.catalina.session.StandardManager.load(StandardManager.java:440)
at org.apache.catalina.session.StandardManager.start(StandardManager.java:655)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3585)
at org.apache.catalina.startup.HostConfig.checkWebXmlLastModified(HostConfig.java:614)
at org.apache.catalina.startup.HostConfig.run(HostConfig.java:854)
at java.lang.Thread.run(Thread.java:479)That sounds like the equivalent of a FileNotFoundException.
ie you have told it the rpt file to load, and it can't find it.
1 - check the spelling of the filename
2 - where have you put the file?
3 - What is your config for this?
Do you have CRConfig.xml (Crystal 11) or CrystalReportEngine-config.xml(Crystal 10) in your WEB-INF/classes directory?
That file tells it where to find the rpt files.
I think the default is WEB-INF/lib for some reason.
I keep my reports in the WEB-INF/reports directory
Mine looks something like this:
<?xml version="1.0" encoding="utf-8"?><CrystalReportEngine-configuration>
<reportlocation>../reports</reportlocation>
<timeout>10</timeout>
<keycode>[insert your keycode here]</keycode>
</CrystalReportEngine-configuration>Hope this helps,
evnafets -
please any one help me i cant sign in at facetime & imessage
COULD NOT SIGN IN.. PLEASE CHECK YOUR NETWORK CONNECTION AND TRY AGAIN
please help what to do thankyouTry:
- Going to Settings>wifi and change DNS to Google's 8.8.8.8
- Go to Settings>General>Time & Date abd set to automatic and make sure that he time zone is correct. -
Calling Smart Form using Driver Program
Hi, I'm a new ABAP developer. I've recently been studied about Smart Forms and I didn't understand what are the benefits to call a smart form using driver program.
Could anyone help me, please?Bruno, it works like this.
Lets says you attach a Z output to a sales order which sends the details of the SO to the customer in a PDF format. For this purpose you have developer the o/p using smartforms or scripts. Now there are few configs that you will perform in order to send the PDF to the customer AUTOMATICALLY once the SO is saved. This is done thru the transaction NACE where you will attach the smartform, the o/p, partner function and driver program.
This driver program will get kicked in when the order is saved and will perform the logic and then call the smartform.
Hope this give a little bit better picture.
Vikram.M -
Help needed with this form in DW
Hi, i have created this form in dreamweaver but ive got this problem.
In the fields above the text field, the client needs to fill in some info such as name, email telephone number etc.
But the problem is when ill get the messages. Only the text from the large text field is there.
What did i do wrong??
http://www.hureninparamaribo.nl/contact.html
Thank you
Anybody??Thank you for your response. So what do i have to do to fix this?
Date: Sun, 20 Jan 2013 07:57:56 -0700
From: [email protected]
To: [email protected]
Subject: Help needed with this form in DW
Re: Help needed with this form in DW
created by Ken Binney in Dreamweaver General - View the full discussion
You have several duplicate "name" attributes in these rows which also appears in the first row
Telefoon:
Huurperiode:
Aantal personen:
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5008247#5008247
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5008247#5008247
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5008247#5008247. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Maybe you are looking for
-
Using SDO_UTIL.GETVERTICES() together with functions
Hi again I'm having a problem here in my spatial database I trying to use the function TABLE(SDO_UTIL.GETVERTICES(c.shape)) in order to get the coordinates of shapes. But I need to first extract data from spatial functions like the centroid function.
-
Hi all, My question is quite simple (I think). XI have to receive a message and send it (exactly the same message) to other channel. Do I need one or two messages for request and response? Regards, Message was edited by: Ismael Perez
-
Using iSight as a streaming security camera
I have a strange problem. My husband and I just adopted a new dog - 9 month old Belgian Malinois. He's too smart for his own good. The crux of the problem is that he's getting out of his crate. The crate is LOCKED and stays locked. Our trainer sugges
-
Working KT3-Ultra2 System suddenly will not post!
Problem: After working fine for two weeks, my new system with a KT3 Ultra 2 mobo does not boot or POST. After pressing the power button, the power light comes on, the hard disk spins up, and then nothing else happens. The D-Bracket LEDs are in the
-
Is Business Rules = ILOG JRules?
Sorry for the newbie question: Is Oracles Business Rules package the same as ILOG JRules? If not: What are the differences? Where can I download Oracle Business Rules? If it is included in SOA Suite: Where exactly can I find Business Rules inside the