Hi! help needed...zen vplus2gb gone dead!

hi all . have a problem with my new zen vplus 2gb.i? have disconned from the system as it was? said not to be detected and after removing it with out safely removal device i've unplugged it and wheni turn it on it has gone dead!does anyone have a clue regarding this . If yes please let me know ,i would be more than happy ,hanks aton.

is the battery ok? you have to hold down the 'on' button to turn it on

Similar Messages

Urgent help needed: WEBAS server suddenly dead.. only SDM is working

Hi Everyone,
We have a WEBAS server installed on win 2003 mahcine. We wanted to install Visual composer and because there was no IIS on server, we installed it.
But after installation i am not able to access my server.
http://<server_name>:50000/index.html
is not working.. checked port 50000(using telnet ip_address port) and found this port is not in use any more..
but i am able to start SDM using remotegui.bat
in sap management console i can see sever is green.
Any idea what has gone wrong??
Thanks and regards,
Sudhir

Hi Sudhir
check in service file for following entry
http 80/tcp www www-http #World Wide Web
also check for follwoing service is runnig in windows 2003 server
IIS admin service
word wide web publishing service
the above service is needed for IIS working
alos check with http://localhost
(coz there is no problem with ur Portal system only problem with IIS )
if every think is ok check the event log for service in windows 2003 server
regards,
kaushal

Help needed photoshop has gone?

right since i upgraded to windows 8 pro ive lost my photoshop elements 9 that came with my laptop , its gone . please help.

Can you check in Control panel /Control and in the Programs list it is there or not. Also check under c:\program files(x86)\adobe if it is there. If it is not there you can reinstall if you have disk with you.

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

My phone has just gone dead need to revive my phone, someone calling me can hear the dailer tone but i am not able to hear any ring, kindly suggest. the monitor is all blank

my phone has just gone dead need to revive my phone, someone calling me can hear the dailer tone but i am not able to hear any ring, kindly suggest. the monitor is all blank

Thank you so much you really hepled, my phone is working again phew!!!

Help needed! I cannot restore my iPhone 5, An unknown error occupied (1)

Help needed! I cannot restore my iPhone 5, An unknown error occupied (1)..

That is either going to be a hardware failure or your phone is jailbroken and something has gone awry with the baseband.

Help needed by new Iphone 4s owner

Help needed please - both my hubby and I have iphone 4s - I've just gone to download music onto my phone and have somehow managed to download all his stuff onto my phone and lost all of mine Is there anyway I can get my info back and delete his without restoring to back to factory settings (this was the first time I connected mine to the laptop to download and I'm not very good with the computer as you can see from my problem !) xx

Thank you but I've not managed to download any I tunes yet but have got all his contacts and none of mine - thats what I'm trying to restore (sorry if not clear in question but as I said before I'm useless on computers)

Help Needed REP-1800 Formatter error VGS-1701 Not enough memory

Hi. Gents
Help needed
I’m working on a Report, it gets some 2 million records and the report pages are approximately 52,000
It works fine if the pages are lesser then 48,000 or the data is less let say one and half a million, the problem occurs only after 48000 + pages formatted.
Report is generated successfully when trying to go to the last page it throw an error.
REP-1800 Formatter error
VGS-1701 Not enough memory
I have already gone through the metalink DOC Id 95505.1 as well as OTN
But all in vain,
Any comments or help much appreciated.
Details are:
Reports 6i (Clients/Server) on Windows platform
(Windows XP Professional with SP 2)
Database: Oracle9i Enterprise Edition Release 9.2.0.5.0
Computer:
Pentium(R) 4, CPU 3.00GHz, 1 GB of RAM
Still 20 GB free space
Thanks & Regards

I don't see the point in making a report with more than 48,000 pages, I think Al Gore will not be happy when you start printing it...
The problem might be caused by the fact that Reports needs to format all output at once, and then even 1GB of memory will probably be not enough. Formatting all pages at once is needed if you use pagination with displaying total number of pages. If you have this, try to get that out of the report definition and try again.

HT1661 My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?

My mid-2009 MacBook Pro has just died via a painful (for me) hard drive failure. I backed up a good percentage of files recently but not enough to keep me happy. I need to access the dead drive on the MBP via a 2008 iMac. Best options?
I have ordered a 800 firewire to 800 firewire cable and am hoping to use the target mode option to copy files from the MBP.
Is this possible?
Hope so!
Any advice and or help would be greatly appreciated.
Many thanks,
Neil

Thanks Ogelthorpe.
Just bought an enclosure to try that also.
Hoping the MBP isn't really dead but just feigning death
Fingers crossed.

Hi my I phone has just gone dead the battery would have been about 50% charged and it does not turn on or is taking a charge any ideas

Hi my I phone has just gone dead it has about 50% charge and wont turn on. It dont seem to take a charge either?
Any ideas my whole business revolves around this bloody thing with out it I am *********
Can some one help please??

Hello, gypsumspring.
Thank you for visiting Apple Support Communities.
Here are the best resources to go through when experiencing this issue.
Resolving issues
If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
Inspect the connector at the bottom of the phone:
Make sure that there are no bent pins in the connector.
Make sure that the connector is free from debris.
If there are bent pins or debris, please contact Apple Support.
Otherwise, continue troubleshooting.
Make sure that the outlet you're using works.
Make sure that the Apple USB cable and Apple USB power adapter work.
Plug the device in to power and let it charge for up to 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
If the device still exhibits an issue, try turning your device off and then on again while connected to power.
If the issue is persists, please contact Apple Support.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Cheers,
Jason H.

Help needed to resolve there is no attribute X errors..

On my website http://www.dorffdesign.nl/ there is a problem. Ive put the FB Like button there and it worked fine for a while. But now its gone. So ive run
http://validator.w3.org/ on it and came up with the next errors:
========================================================================================== ==============================================
Line 232, Column 32: there is no attribute "data-href" <div class="fb-like" data-href="http://www.dorffdesign.nl/" data-send="true" da… ✉
Line 232, Column 71: there is no attribute "data-send" …http://www.dorffdesign.nl/" data-send="true" data-width="450" data-show-faces=… ✉
Line 232, Column 89: there is no attribute "data-width" …orffdesign.nl/" data-send="true" data-width="450" data-show-faces="true"></div> ✉
Line 232, Column 111: there is no attribute "data-show-faces" …orffdesign.nl/" data-send="true" data-width="450" data-show-faces="true"></div>
========================================================================================== ===============================================
In dreamweaver ive use this code for the FB likke button:
<div id="fb-root"></div>
<script>(function(d, s, id) {
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = "//connect.facebook.net/nl_NL/all.js#xfbml=1";
fjs.parentNode.insertBefore(js, fjs);
}(document, 'script', 'facebook-jssdk'));</script>
========================================================================================== ===========
<div class="fb-like" data-href="http://www.dorffdesign.nl/" data-send="true" data-width="450" data-show-faces="true"></div>
I really want to solve this so im hoping if you can point me into the right direction.
Regards

Hi ive bin able to put the fb like button on my page. But i totally forgot how i have to place the fb like button under the black box named portfolio.
I hope you can tell me.
Regards
Date: Wed, 7 Nov 2012 07:41:54 -0700
From: [email protected]
To: [email protected]
Subject: Help needed to resolve there is no attribute X errors..
    Re: Help needed to resolve there is no attribute X errors..
    created by MurraySummers in Dreamweaver General - View the full discussion
You can either ignore those errors (since they have no impact on your page's functionality) or you can use DW to convert your page to an HTML5 doctype (File > Convert > HTML 5, and then the errors will go away.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4829606#4829606
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4829606#4829606
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4829606#4829606. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver General by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Help Needed to learn Material Master

Hi MDM Gurus,
I need your help. I have gone through all the MDM toots like console, import manager, data manager and syndicator.
I have assigned a task to work on MDM Material Master. But i have no experience in that.
Please tell where should i start to have a strong base in Material Master. Please post the documents related to Material Master which will be useful. Thanks in Advance.
Regards
Ashok

Ashok,
If you are using MDM 7.1 version refer, SAP Note 1355137
which contains very useful information as attachments:
MDM71_Material_Content.pdf
MDM71_Material_Fieldmapping.zip
MDM71_Material_Content_Strings.zip
If you are on MDM 5.5 version refer, SAP Note 1255401
MDM_Material_Content.pdf
FieldMapping_CheckTables_Material.zip
Kindly go through these SAP Note and attachments as per your MDM Version.
Thanks and Regards,
Mandeep Saini

Help needed with a design!

HELP! I need help with designing something!
IMAGE on this link " http://i1072.photobucket.com/albums/w362/jjnilsson/DSC_0188.jpg "
i need this patch on the picture to be "remade" in higher definition and the text should be MILF HUNTERS intstead of milf hunter... Anyone that might be able to help me out?
reson for all this is that its gonna be made to a 30x40cm big patch fitting the back of our Team jackets!
send me a pm or a mail ([email protected]) if you need any futher info or if you can help me out! I am really thankful for all the help i can get!
With best regards J. Nilsson, Milf Hunters Mc

I simply did as i got a tip on FB to do
quote from adobe themselves on facebook "Adobe Illustrator You might also want to try asking on our forums as there are many people that can help there as well! http://forums.adobe.com/community/illustrator/illustrator_general"
sry if it was wrong of me, simply thought there might be someone nice out there to give a helping hand
Date: Tue, 5 Jun 2012 13:41:48 -0600
From: [email protected]
To: [email protected]
Subject: Help needed with a design!
    Re: Help needed with a design!
    created by in Illustrator - View the full discussion
This really isn't the place to ask for free services.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4467790#4467790
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4467790#4467790. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Illustrator by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Messaging:System Error(-10)HELP NEEDED!NEED BEFORE...

Messaging: System Error(-10) [Nokia N70] URGENT HELP NEEDED! - NEEDE BEFORE WED 21ST MAY '08 - BUT HELP OTHERWISE APPRECIATED!______________________________
Hey,
I need this help before Wednesday 21st May 2008 as I am going abroad and urgently need my phone. I have had my phone for just over a year now and I have never had any problems with it up until now.... Think you can help...?
This is the scenario. My messages are saved under my nokia N70's MMC memory card and when I get a message there are a number of problems.
1) My phone does not vibrate or alert me when a message comes in. I have checked my profile settings and they are all up to volume.
2) When the messages come through they are not displayed on the main window of the phone as "1 New Message Received" but in the top corner with a little envelope icon. I know the icon normally comes up but the "1 New messge received part doesn't come up.
3)When "1 New Message Reveived" is not displayed on the main window I go into the "INBOX". When I click inbox on "Messaging" the phone displays an error saying: Messaging: System Error(-10) with a red exclamaion mark. The I can not write any messages, view sent, or drafts.
I have tried to change me message settings by going on "Messaging"> Left Click "Settings" > "Other" > "Memory in use" and selected "Phone Memory". This works but then my I looses all my previous messages.
4)My phone is also dead slow. I click menu and it takes at least five minutes to load menu.
IF YOU COULD HELP ME ON ANY OF THESE ISSUES I WOULD BE MAJORLY GREATFUL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks Soo Much,
Robert__________

U said in another post u've tried all my solutions = =?
On that post its for Nokia N95 u kno? Although the problem is similar, but different phone model can lead to quite different solutions.
Are u sure u tried all my solutions?
have u tried this?:
/discussions/board/message?board.id=messaging&message.id=7926#M7926
Also format ur memory card, do not use content copier! dont install too much softwares, as ur phone model is old and doesnt have much space.
This is from NOkia, sometimes does work depending on ur situation:
Memory low
Q: What can I do if my device memory is low?
A: You can delete the following items regularly to avoid
memory getting low:
• Messages from Inbox, Drafts, and Sent folders in Messaging
• Retrieved e-mail messages from the device memory
• Saved browser pages
• Images and photos in Gallery
To delete contact information, calendar notes, call timers, call cost timers, game scores, or any other data, go to the respective application to remove the data. If you are deleting multiple items and any of the following notes are shown: Not enough memory to perform operation. Delete some data first. or Memory low. Delete some data., try deleting items one by one (starting from the smallest item).
use device status http://handheld.softpedia.com/get/Desktop-and-Shell/Windows/Nokia-Device-Status-57673.shtml
to maybe let me see what u got on ur phone (by saving/exporting report).
Make sure u have the latest firmware! Updating firmware is like a hard reset but also upgrade.
Message Edited by goldnebula on 20-May-2008 02:05 PM

HELP NEEDED FAST!

Hey, I hava a rather large problem. just so you know, I am american, and run english language everything. my specs are: [Windows XP PRO] [Athlon 64 FX-55] [ASUS A8N-SLI N-force 4 SLI mobo] [2 gigs ram] [2 6800GT s56 MB]. If anyone remembers, a day or two ago I posted a thread called "Driver uninstall/install help needed", that you can find here, http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=28565
A guy linked me some drivers, and now, when I uninstalled the old ones and was gonna install the new ones, I clinked on the amd64 thing in the suprrt thing, went to ctzapxx, amd it says "C:/Documents and Settings/chief/desktop/drivers/support/amd64/ctzapxx.exe is not a valid win32 application."
I am now stuck with no sound or drivers unless I use the system restore point I made before I did the uninstall/install thing.
I would really like some advice, or better yet, and explanation of why they don't work and where i can get some that do. I will bump this if it falls off the 'st page until i get a answer.
Thanks so much for any help
EDIT: I'm gonna go to sleep, so I'll check on the thread in anbout 8 - 9 hours when I wake up before I go to school.Message Edited by Hillbilly_37 on 09-08-2005 06:04 AM

Hillbilly_37 wrote:
Hey, I hava a rather large problem. just so you know, I am american, and run english language everything. my specs are: [Windows XP PRO] [Athlon 64 FX-55] [ASUS A8N-SLI N-force 4 SLI mobo] [2 gigs ram] [2 6800GT s56 MB]. If anyone remembers, a day or two ago I posted a thread called "Driver uninstall/install help needed", that you can find here, http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=28565
A guy linked me some drivers, and now, when I uninstalled the old ones and was gonna install the new ones, I clinked on the amd64 thing in the suprrt thing, went to ctzapxx, amd it says "C:/Documents and Settings/chief/desktop/drivers/support/amd64/ctzapxx.exe is not a valid win32 application."
I am now stuck with no sound or drivers unless I use the system restore point I made before I did the uninstall/install thing.
I would really like some advice, or better yet, and explanation of why they don't work and where i can get some that do. I will bump this if it falls off the 'st page until i get a answer.
Thanks so much for any help
EDIT: I'm gonna go to sleep, so I'll check on the thread in anbout 8 - 9 hours when I wake up before I go to school.Message Edited by Hillbilly_37 on 09-08-2005 06:04 AM
You're trying to run CTZAPXX.EXE version intented to be executed on 64-bit operating system (eg. Windows x64) while you're using 32-bit XP.
You find the 32-bit version of CTZAPXX lying in another folder (i386).
NOTE: When you install/update drivers using CTZAPXX.EXE you do not need to uninstall your previous drivers, but just 'accept' the 'option' asking your permission to stop all shared components while updating.
Hope this cleared something.
.jtp

Hi! help needed...zen vplus2gb gone dead!

Similar Messages

Maybe you are looking for