Hi!!!How can I change the options in a VI express?
I want to scale a signal, and I am using the vi express "Scaling and Mapping". But!!!!I want to control the differents "options" that I can choose, linear scale, slope...How can I do it? I don´t know if it is possible in a vi Express. I know that I can change the properties of controls and indicators using properties nodes, but I thing that it doesn´t work in this case, but I am not sure!!!!
Thank you!!!
Graci
First thing to do is to convert the express VI to a standard subVI by right clicking on it and selecting Open Front Panel. Then, select which front panel controls that you want and add them to the connector pane.
Similar Messages
-
How can I change the base station my airport express connects to?
I just added a new AirportExpress to my wireless network and am using it to extend the range of the network and for AirPlay. When setting it up I selected the main base station that provides the wireless network when asked to select a device for it to connect to. However, now when I view it in Airport Utility, it's the only device on the network that has only Good signal strength rather than Excellent. There is another AirportExpress conencted which has Excellent signal strength that is the closest access point to this new AirportExpress.
How can I change the setup using Airport Utility so that that's the device that it's using to connect to the network?With a Mac using the Airport Utility.
With a PC using the Airport Utility you can install on your PC with the install disc included. -
How can I change the hotkey assignments for options listed in the context-click (right-click) menu?
How can I change the letter assignments designated to the options that appear in the right-click drop-down menu?
I frequently save specific items and inspect elements in webpages, however currently the key assignment for 'View Page Info' is the letter ' i ', which inconveniently is located out of the reach of my left hand.
Rather than forcing ambidextrous mouse usage to allow my right-hand to rest on the keyboard, if I could be pointed in the right direction for customizing these assignments I would greatly appreciate it. I have been able to disable some of the menu items I don't use with firebug but didn't see/didn't know how to go about customizing this option in about:config or deeper in the program files.
Thanks ahead of time, I'm sure this will be a quick and hopefully easy file/preference name assignment I just need to add, I just couldn't find any forums that had already addressed the request.While that add-on is pretty useful and handy for customizing the keyboard shortcuts for items housed in the Menu Bar, it does not provide the resource to change the key combinations assigned to items in the context-click menu
(the one that appears when you right-click a HTML element or image or such with specific actions pertaining to the item you clicked on - See image)
https://support.cdn.mozilla.net/media/uploads/images/2014-12-14-13-13-50-85097a.png -
when i was trying to update my iphone 4s from 6.1.4 to ios 7,its asking to change the media sync options,how can i change that option,can any one help me.........?
I tried powering down and re-starting the iPhone (as suggested at http://support.apple.com/kb/TS1275). This seems to have cleared the "...not connected to the Internet" problem, and iOS 6.1 is now in the process of downloading.
Thanks very much for your feedback. -
How can I change the file download time using Adobe Send? Adobe SendNow had a lot more options.
How can I change the file download time using Adobe Send? Adobe SendNow had a lot more options.I don't see nay with Adobe Send.
There isn't a feature in Adobe Send for setting and end-date for a file's availability. At any time, you can Unshare the file, however.
-
when bates numbering a .pdf in XI, how can I change the file name to include the bates number and the file name? I know under "file output: it's either/or. I need both. Thanks!
Long ago I wrote a little demo using the touch command. Check out the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=25128#M25128
LabVIEW Champion . Do more with less code and in less time . -
Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal
To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac. -
How can I change the name of item in TableViewController iOS
How can I change the name of item in TableViewController? I want to be able to change the title of an item if I added one. Code:
// ViewController.m
// Movie List
// Created by Damian on 20/02/15.
// Copyright (c) 2015 Tika Software. All rights reserved.
#import "ViewController.h"
@interface ViewController ()
These outlets to the buttons use a `strong` reference instead of `weak` because we want
to keep the buttons around even if they're not inside a view.
@property (nonatomic, strong) IBOutlet UIBarButtonItem *editButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *cancelButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *deleteButton;
@property (nonatomic, strong) IBOutlet UIBarButtonItem *addButton;
// A simple array of strings for the data model.
@property (nonatomic, strong) NSMutableArray *dataArray;
@end
#pragma mark -
@implementation ViewController
- (void)viewDidLoad
[super viewDidLoad];
This option is also selected in the storyboard. Usually it is better to configure a table view in a xib/storyboard, but we're redundantly configuring this in code to demonstrate how to do that.
self.tableView.allowsMultipleSelectionDuringEditing = YES;
// populate the data array with some example objects
self.dataArray = [NSMutableArray new];
NSString *itemFormatString = NSLocalizedString(@"Movie %d", @"Format string for item");
for (unsigned int itemNumber = 1; itemNumber <= 0; itemNumber++)
NSString *itemName = [NSString stringWithFormat:itemFormatString, itemNumber];
[self.dataArray addObject:itemName];
// make our view consistent
[self updateButtonsToMatchTableState];
#pragma mark - UITableViewDelegate
- (NSInteger)tableView:(UITableView *)tableView numberOfRowsInSection:(NSInteger)section
return self.dataArray.count;
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath
// Update the delete button's title based on how many items are selected.
[self updateDeleteButtonTitle];
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
// Update the delete button's title based on how many items are selected.
[self updateButtonsToMatchTableState];
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
// Configure a cell to show the corresponding string from the array.
static NSString *kCellID = @"cellID";
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:kCellID];
cell.textLabel.text = [self.dataArray objectAtIndex:indexPath.row];
return cell;
#pragma mark - Action methods
- (IBAction)editAction:(id)sender
[self.tableView setEditing:YES animated:YES];
[self updateButtonsToMatchTableState];
- (IBAction)cancelAction:(id)sender
[self.tableView setEditing:NO animated:YES];
[self updateButtonsToMatchTableState];
- (void)actionSheet:(UIActionSheet *)actionSheet clickedButtonAtIndex:(NSInteger)buttonIndex
// The user tapped one of the OK/Cancel buttons.
if (buttonIndex == 0)
// Delete what the user selected.
NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
BOOL deleteSpecificRows = selectedRows.count > 0;
if (deleteSpecificRows)
// Build an NSIndexSet of all the objects to delete, so they can all be removed at once.
NSMutableIndexSet *indicesOfItemsToDelete = [NSMutableIndexSet new];
for (NSIndexPath *selectionIndex in selectedRows)
[indicesOfItemsToDelete addIndex:selectionIndex.row];
// Delete the objects from our data model.
[self.dataArray removeObjectsAtIndexes:indicesOfItemsToDelete];
// Tell the tableView that we deleted the objects
[self.tableView deleteRowsAtIndexPaths:selectedRows withRowAnimation:UITableViewRowAnimationAutomatic];
else
// Delete everything, delete the objects from our data model.
[self.dataArray removeAllObjects];
// Tell the tableView that we deleted the objects.
// Because we are deleting all the rows, just reload the current table section
[self.tableView reloadSections:[NSIndexSet indexSetWithIndex:0] withRowAnimation:UITableViewRowAnimationAutomatic];
// Exit editing mode after the deletion.
[self.tableView setEditing:NO animated:YES];
[self updateButtonsToMatchTableState];
- (IBAction)deleteAction:(id)sender
// Open a dialog with just an OK button.
NSString *actionTitle;
if (([[self.tableView indexPathsForSelectedRows] count] == 1)) {
actionTitle = NSLocalizedString(@"Are you sure you want to remove this movie?", @"");
else
actionTitle = NSLocalizedString(@"Are you sure you want to remove these movies?", @"");
NSString *cancelTitle = NSLocalizedString(@"Cancel", @"Cancel title for item removal action");
NSString *okTitle = NSLocalizedString(@"OK", @"OK title for item removal action");
UIActionSheet *actionSheet = [[UIActionSheet alloc] initWithTitle:actionTitle
delegate:self
cancelButtonTitle:cancelTitle
destructiveButtonTitle:okTitle
otherButtonTitles:nil];
actionSheet.actionSheetStyle = UIActionSheetStyleDefault;
// Show from our table view (pops up in the middle of the table).
[actionSheet showInView:self.view];
- (IBAction)addAction:(id)sender
[self.dataArray addObject:@"New Movie"];
// Tell the tableView about the item that was added.
NSIndexPath *indexPathOfNewItem = [NSIndexPath indexPathForRowself.dataArray.count - 1) inSection:0];
[self.tableView insertRowsAtIndexPaths:@[indexPathOfNewItem]
withRowAnimation:UITableViewRowAnimationAutomatic];
// Tell the tableView we have finished adding or removing items.
[self.tableView endUpdates];
// Scroll the tableView so the new item is visible
[self.tableView scrollToRowAtIndexPath:indexPathOfNewItem
atScrollPosition:UITableViewScrollPositionBottom
animated:YES];
// Update the buttons if we need to.
[self updateButtonsToMatchTableState];
#pragma mark - Updating button state
- (void)updateButtonsToMatchTableState
if (self.tableView.editing)
// Show the option to cancel the edit.
self.navigationItem.rightBarButtonItem = self.cancelButton;
[self updateDeleteButtonTitle];
// Show the delete button.
self.navigationItem.leftBarButtonItem = self.deleteButton;
else
// Not in editing mode.
self.navigationItem.leftBarButtonItem = self.addButton;
// Show the edit button, but disable the edit button if there's nothing to edit.
if (self.dataArray.count > 0)
self.editButton.enabled = YES;
else
self.editButton.enabled = NO;
self.navigationItem.rightBarButtonItem = self.editButton;
- (void)updateDeleteButtonTitle
// Update the delete button's title, based on how many items are selected
NSArray *selectedRows = [self.tableView indexPathsForSelectedRows];
BOOL allItemsAreSelected = selectedRows.count == self.dataArray.count;
BOOL noItemsAreSelected = selectedRows.count == 0;
if (allItemsAreSelected || noItemsAreSelected)
self.deleteButton.title = NSLocalizedString(@"Delete All", @"");
else
NSString *titleFormatString =
NSLocalizedString(@"Delete (%d)", @"Title for delete button with placeholder for number");
self.deleteButton.title = [NSString stringWithFormat:titleFormatString, selectedRows.count];
@endHey JB001,
Sounds like you have more going on than just a simple issue with Home Sharing and more dealing with Wi-Fi syncing. Start with the article below and see if that may resolve it.
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
http://support.apple.com/kb/TS4062
If it does not work out, then may I suggest contacting Apple for further assistance to walk you through it or just take that time that you were talking about to sort it out.
Contact Apple Support
https://getsupport.apple.com/GetproductgroupList.action
Regards,
-Norm G. -
Question
When I opt to "download this as a file" from my email account, Firefox defaults to notepad to open the file. How can I change the default to MS Word?Is FF downloading the file as a .txt file? If so, go to "Folder Options" in the windows control panel. Click on the "File Types" tab. Scroll down until you reach the TXT file extension. Look to see what that extension opens with (lower part of panel). It probably shows notepad. Click on the <Change> button. Scroll down until you find "Microsoft Word." Select it and click the <OK> button. That should show the TXT extension is now associated with Microsoft Word. Click the <Close> button at the bottom of the panel.
If FF is downloading the file as any other type, use the same process as above except look for the corresponding extension instead. If the extension is not listed click on the <New> button and create an association using the extension in the file name and then associate it with MS Word.
davewdan -
My mother used to be the bill payer on my iTunes account so now every time I send an email from my iCloud account it sent with her name, how can I change the settings so emails are sent from myself?
I've changed the bill payer to myself but it stills says on emails that I sent that its from my mother.In order for the "From" field to show you options on the "from" addresses available, you must set them up in the Preferences > Accounts first.
I can't show you a screen shot of the from field because I currently only have one account, so the from address used is the default. However, when I had more than one, then options will show up in your compose/reply window.
You'd need to add an account here: -
How can I change the email associated with my forum account?
How can I change the email associated with my forum account? I didn't provide my work email to you, but you put it in my account. My forum postings have nothing to do with my personal PC at home. There isn't an option to update it.
This question was solved.
View Solution.Hi:
Log in and click on your user name, then look at the upper the right side of the page.
Click on the triangle to the left of the "More Resources" section.
This will drop down, and give you options.
Select User Settings.
This will now open a page, and in the light blue type on top, follow it along to Contact Information, click on that, and change your e-mail address to what you want, and hit the blue submit button on the bottom right side of the page.
Paul -
How can i change the date of birth on my account
how can i change the date of birth on my account
Hello! Please login here: https://appleid.apple.com/account/manage
Then go to "Password and security"
Answer your security questions and the birthdate option will appear. -
How can I change the User Password expiry date
Hi,
I want to know how can I change the password expiration date of my user without changing his password. For eg:-
User password expires on 12th May 2007. I want to extend to 12th Jun 2007. Is there any option in Oracle.
Alter User <USERNAME> password expire .....<to new date>;The command is not alter user set expire...
You should modify the user's profile, and set a timeframe:
ALTER PROFILE DEFAULT LIMIT
PASSWORD_LIFE_TIME = num_of_days;
This way your password will be valid from the last time it was changed and for the time frame previously defined.
~ Madrid. -
how can I change the password on my sons computer? he has forgotten it.
Did you create a second administrator account on his machine? Or is there only one account on his machine?
Alternatively.. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear. -
How can I change the color in this "pieces"
Hello guys, I'm new in the forum and I'm searching for help.
I'm using a free template that I downloaded from
the internet but I'm having a small problem.
When I put the logo that I want use in the template, the color is not the original one,
after some minutes trying to discover how I could change it to the original version of the logo, I found an option on "fill" with a color that I could change..
the problem is that when I change the color, all the logo changes in the same time, so I created 2 logos.. one of then only with the dark color and the other with the red color
so with this method I could change both colors on this "fill" option and all would be okai.
the problem is that both of the logos are changing in the same time.
I need to change the X to RED and the Moto to Black
Another problem that I have is : the little pieces of the logo that come all togheter, they are all black.. and i need to change it to the right color.
cause the text are in one color and the pieces are all black.I did it, but i saw that Fill effect is a little "Shadow" behing the text... just for a small white line... I'm almost done with this intro, now I'm trying to find out how can I change the color from the X and MOTO
cause when I change the color, both changes, and this can't happen.
I need the X red and the Moto dark...
I made 2 compositions ... one with just the X X red.. and another with just Moto in dark color... but I don't know how to put this 2 compositions in 1 composition.
Maybe you are looking for
-
Just bought latest digital AV adapter MD098ZM/A. Does not work with my iPad 2. Error messade" this accessory is not supported by iPad" while the package saying it supports iPad 2 and later.
-
Yeah, so this is what happened. I had an old iPod nano, and then my computer crashed and deleted eveything. Then, I got a new iPod, and I want to put songs that I had on a CD that I already had on iTunes before my computer crashed onto my new iPod, b
-
Please help me figure out what this kernel panic is about
Computer keeps crashing. Went to genius bar, said it was sticky windows, deleted that, came home, still an issue. I can't decipher what all the Console gibberish means. Thu Apr 14 00:53:30 2011 panic(cpu 1 caller 0x55db30): "!pageList phys_addr"@/Sou
-
Hi All, Users are facing different kind of error while running the report in Webanalysis 9.3.1 Error:- [1003] Native : 502 Invalid Object Path Specified App/Appname/cube/cubename/Dim/Time but when the same reports are runned with admin ID it was open
-
How to set-up an Xbox Midi Drumkit to Logic?
I have searched many forums and videos on this topic and have found nothing that helps me get the basics down, im not an expert at all this new digital recording. I have an Xbox MIDI Drumkit (Rockband) -> Digidesign 003 Rack -> Mac Book Pro -> Logic