Hi, How can I get the tasks I added to show up in Ical?

Ive been trying get my tasks to show up in my calendar either on ical or outlook but am unable to, any ideas?

You have to sync your calendar with some type of service like Google or iCloud or the MS one, is it Outlook.com now, and whatever calendar system/program you are using has to support the sync with that serivce for those tasks to propagate to all your devices.
I use Thunderbird as an email program on both Mac and PC. My Android phone syncs to Google Calendar along with TBird add-on for a calendar on my PCs and the Mac calendar program in both Lion and Mt Lion sync to google as well. I can add a task on any of them and it shows up on all other devices.

Similar Messages

  • HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
    Hope this helps.

  • How can i get the time and result together show in one Array or in Cluster?

    hello everyone i am a new user .I want to get the time and voltge form a Generater. How can i get the time and result together show in one Array or in Cluster?When i selecte the first(or third...) result then in the front panel display the time and the voltge.Thank you!
    I post the time and voltge NOT together photo
    Attachments:
    12345.GIF ‏54 KB

    You can create an array of clusters with one element being the time and the other being the voltage, like so (using the "Get Waveform Components" function):
    Message Edited by smercurio_fc on 10-17-2007 03:15 PM
    Attachments:
    pic.PNG ‏11 KB

  • How can I get the Task information..? Remedy for error "-200089"

    Hello,
    I am using PCI-6229 for the application, and VB6 for application development.
    We have a policy to create the tasks and associated channels using Measurement and Automation Explorer.
    I want to know can I retrieve the information of the tasks those are created ..
    When my VB program starts, I use DAQmxLoadTask function to start executing the task, but for this I need to know the TASKNAME. On site if the service engineer accidentally renames the task name, the program stops execution. To avoid this problem, i would like to know how can I get the information about the tasks, such as the tasks those are created, their names, type of channels used (i/ps, o/ps, Analog channels), etc.
    This would help my application to execute without hard coding the task names as well as I can close the tasks if they are running before exiting the application. 
    Also, while developing the application, it happens that the application crashes, and the tasks remain open and running. After I fix the error and execute the program, the application reports the error, "-200089 Task Name specified conflicts with an existing task name". To recover from this error, I need to restart the PC, which is most frustrating and time consuming. If I could know the tasks and task handles those are already created and running, I can safely delete them or continue using them.
    I would appreciate if you could help me in resolving this problem.
    Thank and regards,
    Kunalb

     Hi Kunalb,
     To read the tasks currently configured on the system you can use this function: DAQmxGetSysTasks.  This will return an array of the tasks on the system. In that same section of the DAQmx C Reference Help they talk about obtaining the other parameters you mention.
     Another solution would be to add security to MAX such that only engineers with proper permissions could launch and/or modify the tasks. This can be done with Windows XP in the properties of a file.
     I hope these suggestions help! Have a great weekend.
     Best regards,
     MatthewW
     Applications Engineer
     National Instruments
    Message Edited by Matthew W on 08-10-2007 02:13 PM
    Attachments:
    DAQmxTasks.JPG ‏97 KB

  • How can I get the Voiceover Keyboard shortcuts to show up in a form in which I can copy

    I have low vision & have been trying to learn to use Voiceover on both my iPhone & my Mac mini for months. Very frustrating.
    1. How can I get the Voiceover keyboard shortcut commans to show up in a form in which I can copy & paste them into a pages document so I can print it out & use for quick reference?? The one that shows up when I press VO +HH won't let me copy & paste it, & it won't show up in the Help section no matter what subject I enter. The help topics shown do not correlate with the topics I'm entering. why is that??
    2. Please make the cursor able to be wider, like in the software program Zoomtext, that I used when I had a PC. The razor-thin cursor (in this text box!) in Pages is impossible for me to see.
    Thank you for any help you can provide.

    http://www.applevis.com/guides/voiceover-keyboard-shortcuts-mac-os-x
    You should be able to copy them from there.

  • How can I get the File, Edit, View, Windows ect to show in Organiser

    While on various tutorials they all show a
    menu of file, edid, view ect in the top left hand corner of the screen, mine shows only a small square box that when clicked give you the option of restore, close minimise ect. How can I get the file edit menu to show. Should have said in Photoshop Elements 9.

    Thanks Barbara that's done the trick

  • How can we get the prompt to enter IP Address, Subnet Mask , gateway and DNS Server during Task Sequence?

    How can we get the prompt to enter IP Address, Subnet Mask , gateway and DNS Server during Task Sequence?

    This is for 2007 but may still be relevant for 2012
    http://hexdump.net/?p=391
    Cheers
    Paul | sccmentor.wordpress.com

  • How can I get the cursor's position in a opened file and display a menu?

    Hello,
    I want to make a program by which I will be able to display a panel/pops up menu at the corsor's current position, (In any text/doc file or in the desktop, we can display a menu by right click of the mouse.) Now I want my program to do the same task.
    More clearly-
    1. First I would save some words or sentences in a file(aa.txt).
    2. Then I would open another text file/ a word/ excel/ or any other editor( bb.txt / cc.doc / dd.xls / ee.html ).
    3. While editing or writing something in the opened file, if I click the right mouse button/ press a key (ctrl+space), a menu will appear containing the sentences I saved in the file(aa.txt) previously.
    My program will tell me the cursor's position in bb.txt / cc.doc / dd.xls / ee.html that i opened. And display a menu. my problem is not reading / writing in a file.
    My problem is how can I get the cursor's position in a opened file display a menu at that position by a mouse/key action*.
    Would you please help me on this regard.
    Thanks

    DrClap wrote:
    I think the OP wants to start up an application like MS Word and then operate it from a Java program.Doesn't The Monkey's Paw do that? What a second, according to Wikipedia:
    [http://en.wikipedia.org/wiki/The_Monkey%27s_Paw]
    <quote>
    ...the paw of a dead monkey is a talisman that grants its possessor three wishes, but the wishes come with an enormous price.
    The moral of the story is contained in this description of the paw: "It had a spell put on it by an old fakir," said the sergeant-major, "a very holy man. He wanted to show that fate ruled people's lives, and that those who interfered with it did so to their sorrow."
    </quote>
    So I guess that a non-sequitor ... or is it?

  • How can I get the history of the subprogram  i.e Procedure  ........?

    How can I get the history of the subprogram i.e Procedure ........?

    annu_rajput wrote:
    I mean I want to see .
    When procedure was created.?
    what was the original code ..?
    what are the modification done since ..?
    who has modified it ......?This is not a task for Oracle. This is a task for a version control system.
    You can see when a procedure has been created in ALL_OBJECTS (CREATED and LAST_DDL_TIME columns) but even using flashback queries on this table you don't expect to go back for long.
    Definitely you cannot see who has modified it. You can only see the procedure owner.
    Again, Oracle is NOT a version control system. You are on the wrong way.
    Regards.
    Al

  • How can u get the matching percentage whenever compare the pdf files(compare the strings)

    Actually I want matching percentage whenever compare the pdf files.First I had completed 
    read the pdf files content into string
    my code like as
    using System;
    using System.Collections.Generic;
    using System.ComponentModel;
    using System.Data;
    using System.Drawing;
    using System.Linq;
    using System.Text;
    using System.Threading.Tasks;
    using System.Windows.Forms;
    using System.IO;
    using iTextSharp.text;
    using iTextSharp.text.pdf;
    using iTextSharp.text.pdf.parser;
    namespace WindowsFormsApplication1
    public partial class Form1 : Form
    string str1;
    string filename;
    string path;
    string str2;
    public Form1()
    InitializeComponent();
    private void button1_Click(object sender, EventArgs e)
    OpenFileDialog openFileDialog = new OpenFileDialog();
    openFileDialog.CheckFileExists = true;
    openFileDialog.AddExtension = true;
    openFileDialog.Filter = "PDF files (*.pdf)|*.pdf";
    DialogResult result = openFileDialog.ShowDialog();
    if (result == DialogResult.OK)
    filename = Path.GetFileName(openFileDialog.FileName);
    path = Path.GetDirectoryName(openFileDialog.FileName);
    textBox1.Text = path + "\\" + filename;
    private void button2_Click(object sender, EventArgs e)
    OpenFileDialog openFileDialog = new OpenFileDialog();
    openFileDialog.CheckFileExists = true;
    openFileDialog.AddExtension = true;
    openFileDialog.Filter = "PDF files (*.pdf)|*.pdf";
    DialogResult result = openFileDialog.ShowDialog();
    if (result == DialogResult.OK)
    filename = Path.GetFileName(openFileDialog.FileName);
    path = Path.GetDirectoryName(openFileDialog.FileName);
    textBox2.Text = path + "\\" + filename;
    public static string ExtractTextFromPdf(string filename)
    using (PdfReader r = new PdfReader(filename))
    StringBuilder text = new StringBuilder();
    for (int i = 1; i <= r.NumberOfPages; i++)
    text.Append(PdfTextExtractor.GetTextFromPage(r, i));
    string result = text.ToString();
    return result;
    public static string Extract(string filename)
    using (PdfReader r = new PdfReader(filename))
    StringBuilder text = new StringBuilder();
    for (int i = 1; i <= r.NumberOfPages; i++)
    text.Append(PdfTextExtractor.GetTextFromPage(r, i));
    string result1 = text.ToString();
    return result1;
    private void button3_Click(object sender, EventArgs e)
    str1 = Form1.ExtractTextFromPdf(textBox1.Text);
    str2 = Form1.Extract(textBox2.Text);
    }Finally how can u get the matching percentage whenever compare the pdf files(compare the strings)please help me.thank u

    Hi,
    Based on your code, I see your code related to
    iTextSharp Pdf.
    iText is a third party library to create PDF originally written for java. iTextSharp is
    the C# adaptation of that library.
    Question regarding iText are better asked on the iText forum, rather than the Microsoft Forum:
    http://itextpdf.com/support
    Thanks for your understanding.
    Best regards,
    Kristin
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Key in registry – how can I get the content?

    Hello!
    Key in registry: I need all sub-keys that exist in this key. How can I get the list?
    Thanks!

    reg is a command line tool in windows that allows you to query the registry. You can use it to query any part of the windows registry. Once you know what query string you will need to query the entry you want, you can use ProcessBuilder to build the command line command you want to run. In your Java code, you will then need to run an external application (reg) with its arguments. ProcessBuilder is a class which makes this task easier.

  • How can we modify the Task Priority in BPM workspace???

    How can we modify the Task Priority in BPM workspace??? Is it possible?? If so what is the best and easy way to implement this??

    Hi Chandra,
    First please find the job name in SM37 for FIGL and check the job status to be in "released" status. Select that job and go to job menu and click on change. then it will take you to the job screen where you have "job class". Here you can change the job class to "A" to get to high priority.
    If you are unable to edit the job then create a new job with the same variants by clicking STEP button in the Job screen.
    Try these steps, let me know if are able to do so.
    Regards,
    Ravi Kanth

  • I lost all of my artist names and album names for my iTunes library. They are all now on one album. How can I get the album and artist names back?

    I lost all of my artist names and album names for my iTunes library. They are all now on one album. How can I get the album and artist names back?

    I have a script called ExportImport for this task, but it only runs in Windows.
    In principle something similar should be possible in AppleScript, but I don't currently have access to a Mac to write it myself.
    tt2

  • I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

    i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

    Well I'll guess you're using iPhoto 11:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • How can i get the all values from the Property file to Hashtable?

    how can i get the all values from the Property file to Hashtable?
    ok,consider my property file name is pro.PROPERTIES
    and it contain
    8326=sun developer
    4306=sun java developer
    3943=java developer
    how can i get the all keys & values from the pro.PROPERTIES to hashtable
    plz help guys..............

    The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
    InputStream is = new FileInputStream("tivoli.properties");
    props.load(is);

Maybe you are looking for