Hi, how can i run i real b on my mac?

No apps can be opened on Mac they just sit there waiting to be syncned to your portable iOS device if you have one. Then on your portable device you can open them.
You might want to check or use Google to find out if there's a (computer application) and check system requirements for that and if compatible then you will be able to install the application and then open and run it on your computer. Or it may be web based also.

Similar Messages

How can I run a windows Cd on my mac?

How can I run a Windows Cd on my Mac?

Inside CrossOver Mac, Parallels Desktop, or similar products.
(67907)

How can i run word through windows on my mac

how can i run word through windows on my mac

It is difficult to understand your question. Do you want to run Word in Windows on your Mac, or do you want to run Word on your Mac?
You can install Office for Mac.
http://www.microsoft.com/mac/products
Or you can install Windows and then install Office for Windows in your Windows installation.

How can i run a windows based program on mac book pro

Can I run a windows based program on mac book pro mountain lion 10.8.4

You can use bootcamp to install windows natively on the hard drive. You then choose which OS you wish to use at startup - OS X or Windows.
You can also install Windows in a virtual machine - Parallels or VMWare Fusion - and run it simultaneously with OS X (a virtual machine is just a PC emulated in software, and you install and run windows in the emulated machine hardware).

How can i run AirPort Express for both a Mac and Windows 2000 SP2?

I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?

Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
They were running XP SP2.
Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
Good luck
susan
iBook G4 Mac OS X (10.3.4)

How can I run Command-line tools on my Mac?

On another thread* over in the QuickTime Community in 2007, kyc wrote
You can easily create a subrip file and convert it to scc for free using SUBRIP2SCC.
http://www.geocities.com/mcpoodle43/SCCTOOLS/DOCS/SCCTOOLS.HTML
That's exactly what I want! And it's FREE!
However, it's a(n) .EXE file. When I downloand it and double-click on it, MacOS 10.6.8's Finder says, "That's a Windows file. Are you sure?" Frankly, I'm not sure at all.
Somewhere around here I have a very old version of Parallels. I guess I could get it working again.
But can you think of another way for me to get to use this program on my machine?
--Gil
* - https://discussions.apple.com/thread/1118368?start=15&tstart=0

Bob--
Yeah, I thought so, too. But I tried your suggeston before I posted, and that's how I got here.
That Google clue points most emphatically to an Apple Support Communities thread on which kyp suggests:
You can easily create a subrip file and convert it to scc for free using SUBRIP2SCC.
http://www.geocities.com/mcpoodle43/SCCTOOLS/DOCS/SCCTOOLS.HTML
That got me excited. Now why would a contributor to this Apple discussion group refer to a webpage that can only be useful to Windowsites? So I asked here.
You're right. Surely there must be a Mac version. I'll keep looking.
And I think I'll also try a taste of Wine.
Thanks for your help, guys.
--Gil

How Can One Run Only In The System Administrator ( ie root ) ?

Upon creating a System Administrator ( ie root ) in Command + R , of course after Clean Installing OS X ML with my own specific Apple Verified Account ,
i have the Log In screen from a startup , either Safe Boot or a Boot , and i have my own specifc Apple Verified Account , plus the Other... ,
which the Other... of course is the System Administrator ( ie root ) .
How Can One Run Only In The System Administrator ( ie root ) ?
Is there a way in Terminal with sudo su to make it work ?
Shall i just always log in with Other... System Administrator ( ie root ) , and just forget the my own specific Apple Verified Account ?

As of EHP3, you could still install some EHP components. On an ERP 6.00, you could just push SAP_APP to 6.03 and move on. Now if you want another component in your system with an EHP4 version, you can't have some components at EHP3 and some at EHP4. You would install EHP4 for the new component you desire updated and part of the work will be to also update SAP_APP to 6.04.
EHP4 is an UPGRADE process, with shadow instance & all the joy of an upgrade process. You can either run ressource minimized or downtime minimized. In resource minimized, the shadow instance runs on the same server as the main instance. Downtime minimized allow to run the shadow instance on a separate / new server. Anyway you go, you will always have a "Downtime Phase" when you bring back the updated components from the shadow instance toward the real production one.
As with any UPGRADE project, the benefits of installing EHP4 for your business has to weighted against the downtime cost.
Our tests so far on small systems (few data, few users, 120GB database) show ~3 days process from EHP3 to EHP4 (all components) with a downtime phase of about 22 hours using the "resource minimized" path, i.e. shadow & main instance on the same server (4 CPUs, 16GB RAM). Until you give a try at your Sandbox or DEV systems, you won't have realistic figures for your environment.
Good luck!

How Can I Run A SQLJ Normal Project In SAP NWDS

I have a question about SQLJ in SAP NWDS.
1.I created a java dictionary project,and then create the table , then depoly it.it's ok.
2.I created a java normal project including the above java dictionary project.
3.I used the SQLJ tech in the java normal project,exporting the opensqllib.jar,sqljapi.jar,sqljc.jar,sqljimpl.jar.
4.I coded the normal project,and export the project .jar,everything is ok.
<b>5.But when i runed the project in NWDS,the error appeared:java.lang.NoClassDefFoundError: com/sap/sql/log/OpenSQLException
at com.ezkj.deom.sqlj.MainApp.main(MainApp.java:21)
Exception in thread "main"</b>
How Can I Run A SQLJ Normal Project In SAP NWDS?
PLS Help me and don't let me alone!

Tony,
Why not try to import your SQLJ project in SAP NWDS. Add all the jars mentioned to the project path both for compile time as well as runtime. Now try running he project. Once you are able to bypass java.lang.NoClassDefFoundError, you will get other errors related to SQL statements. These Oracle SQL statements needs to be converted to OpenSQL format.
Chill out!!!
Sukanta Rudra
Note: If helpful, plz donate some points.

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

How can I run more than one VST on a PC slave running Logic 5.5?

I have moved from PC to Intel Mac (good!) and wish to run several non Intel VST apps from a slave PC running Logic 5.5 (ie Trilogy, Atmosphere).
My question is (and forgive my stupidity if the answer is obvious) how can I address each virtual instrument from the Mac? Currently I operate MidioverLAN CP which enables my PC computer to receive midi but I seem only to be able to access one instrument at a time, not permitting me to run several apps at once.
many thanks in advance for any kind help

Logic 5.5 is not an ideal VST host, as by default, only one virtual instrument is in Live mode, and you can't rig up environment solutions without a large latency (which makes it unusable).
There is a workaround involving putting a bypassed IO plugin on your instrument tracks, and then you can use environment cabling without the large latency (it tricks Logic into putting all instruments in Live mode). Then you'd cable your physical input through a channel splitter and onto the audio instruments to assign each a MIDI channel as has been discussed to death on this forum.
If there isn't a reason you must use Logic 5.5 PC to do this, then there are much better PC VST hosting apps and I recommend looking into them...

How can I run 2 keynote presentations on 2 different macs with only one keyboard?

How can I have 2 different keynote presentations that I want to run simultaneously through 2 different projectors, but I'd like to try and avoid using 2 keyboards - and use a hardware solution, rather than relying on my 2 fingers!! (it's a long conference!!!) thanks for any help.

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

How can I run a vga monitor and projector together on my Mac Pro 15"??

How can I run a vga monitor and projector together on my Mac Pro OSX 15"?

You can upgrade to Snow Leopard, Lion or Mountain Lion (coming next month), but you need Snow Leopard to upgrade to Lion or Mountain Lion. Check this web to know how to add memory to your computer and the memory that it supports (probably, 3 GB).

How can i run a java class file from shell?

Hi all,
I've a .class file named "File" that contains Main method, it is in the package "File2".
How can I run it by shell command?
PS: "java -cp . file" doesn't work it launch->
Exception in thread "main" java.lang.NoClassDefFoundError: File2/File (wrong name: File2/File)
Thanks in advance.

Just to understand: is File2 ar jar archive or not? If it is a jar archive, have you tried open File2.jar? If File2 is a directory within the current directory, have you tried java -cp . File2/File? I just tested with a set of classes and it works... Let me be precise:
* Let us imagine you are working in a directory whole path is PathToDir/
* in this directory you have the classes put in a directory called File2
* in order to launch File.class then you would have to invoke :
cd PathToDir/ (just to be sure)
java -cp . File2/File
*if you were to do the following then you would have the problem you describe
cd PathToDir/File2/
java -cp . File

How can I run a packet sniffer on a Router or Switch

I have on my network several router 1700 series and switches Catalyst 2950 and I want to know how can I run ethereal on those babies to monitore what comes and goes

The two most common methods would be (the old way) insert a hub (not a switch) in-line between the devices withthe traffic you wish to monitor or (the new way, for Cisco anyway) using port mirrroring.
A hub (not a switch) will repeat every pulse that passes on the line to the analyzer.
Since finding a new hub these days is virtually impossible (even some of the things sold as hubs are really switches), the more common way, at least in Cisco environments, is to "SPAN" (aka Port Mirroring) the port of the device whose traffic you'd like to monitor.
Here's the setup guide for a 2950:
http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_19_ea1/configuration/guide/swspan.html
Good Luck
Scott

How can i run a special name method of class?

i dynamic created a obj
and i don't know the method of class,
so i use a String parameter as the method's name
but how can i run the method?
please give me a copy of code, thanks!

import java.lang.reflect.Method;
public class unknown{
     public static void main(String[] args){
          unknown thisObj = new unknown();
          Class thisClass = thisObj.getClass();
          // calling the method()
          try{
               Class[] allParamatersType = {};
               Method mth = thisClass.getDeclaredMethod("method", allParamatersType);
               String returnCallingAdd = (String)mth.invoke(thisObj, null);
               System.out.println("calling add() : " + returnCallingAdd);
          catch(Exception ex){
               ex.printStackTrace();
          // calling the method(int , string)
          try{
               String firstValue = "Testing";
               Class[] allParamatersType = { firstValue.getClass() };
               Object[] values = { firstValue };
               Method mth = thisClass.getDeclaredMethod("method", allParamatersType);
               String returnCallingAdd = (String)mth.invoke(thisObj,values );
               System.out.println("calling add() : " + returnCallingAdd);
          catch(Exception ex){
               ex.printStackTrace();
     public String method(){
          return "method() called";
     public String method(String two){
          return "method(String) called";

Hi, how can i run i real b on my mac?

Similar Messages

Maybe you are looking for