Hi, how do i remove a partition on my hard drive and on my time capsule

hi,
how do i import an aperture vault onto a new computer with aperture 3 installed

Use the Boot Camp Assistant in the /Applications/Utilities/ folder to remove it. If you're running Mac OS X 10.4, also see this article.
(56735)

Similar Messages

  • HT3500 how do you transfer data from an external hard drive to a mac time capsule

    I am trying to use my Mac Time Capsule as a wireless external hard drive for my MacBook Pro, so how do I transfer the data from a toshiba external hard drive, to my Mac Time Capsule?

    Drag and drop or copy and paste files just as you would do with any normal Finder operation.
    The Time Capsule is located under the SHARED heading in the Finder.
    Click on the Time Capsule icon and double click the folder that appears representing the drive....named Data....unless you have changed the name......to mount the drive on the desktop.
    Drag/drop or copy/paste files to the icon on the desktop or to the open window there.

  • How do I remove the partition on my hard drive?

    I've got 20 GB dedicated to Windows but want to remove the partition and make the hard drive 100% Mac-use only. Any ideas on how to do that?

    Use the Boot Camp Assistant in the /Applications/Utilities/ folder to remove it. If you're running Mac OS X 10.4, also see this article.
    (56735)

  • Can I partition a 1tb hard drive and also run time machine on that hard drive

    I have a 1TB external hard drive which s currently running for Time machine only.
    I was hoping to be able to partition the EHD so that 500GB would be for the Time Machine side and the other 500GB would be used as an ecternal storage [ a friend of mine has just lent me a 250gb hard drive with a load of tv series which i want to be able to copy].
    Can anyone tell me if this is possible and if so how do i do it.
    I know that Time Machine is running now but I don't mind starting all over again.

    Yes it is possible, but it is generally not a good idea. That being said, if you decide to use the EHD for another purpose, partitioning it is the best solution. How big is your internal HD? It is recommended for a TM partition to be 2X as large as your internal drive, and it must be at least the size of your internal HD in order to be used.
    In order to partition:
    1) Connect the EHD
    2) Open Disk Utility and select the drive
    3) Click the "partition" tab and drag the original partition to its desired size.
    4) Click "Apply" to create the secondary partition.
    Resizing the TM partition will not erase it.

  • How can I erase (or remove) the hard drive from a dead Time Capsule?

    How can I erase (or remove) the hard drive from a dead Time Capsule?

    I found this having had the same problem...
    http://forums.macrumors.com/showthread.php?t=553818
    Having removed the hard drive I'm finding I can't reformat it. I manage to mount the HD but Disk Utility crashes when trying to format (HD attached to Mac via Newer Tech. SATA cables to USB) and causes what I think is a kernal panic on my Mac which hard crashes. I see 3 partitions when attempting to mount one of which is AFP. Anyone got any ideas about how to do this? I've dug around but the only progress I've made is to note others have had to work around ACL's when replacing the logic board of the TC. Not sure if this even relates to the problem. However the tool for doing this seems to have been removed from SL. (Forum references to this procedure all relate to 10.5).

  • How do I remove Apple Mail from my hard drive? Over 10,000 downloaded into my mail and continues to freeze up---  I just want to use my gmail account directly

    How do I remove Apple Mail from my hard drive? Over 10,000 downloaded into my mail and continues to freeze up---  I just want to use my gmail account directly

    I go to Gmail to do my email yes, in my browser, but ya know how sometimes you click on a website to email someone and it pulls up apple mail, and then tons of email dump into apple mail and it frequently causes my computer to lock up and have to shut down w/escape.  I thought it would be  better to take it off if I could

  • When trying to remove a partition on my hard drive I couldn't

    when trying to remove a partition on my hard drive I got an error and the option was grayed out in boot camp assistant. error message:  "The startup disk cannot be partitioned or restored to a single partition.  startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Window".

    I am going to revise my question to this.  If I compress my itunes folder which would save me a considerable amount of space will this make the music and apps information stored in there unsyncable? 

  • How to backup an external hard drive plugged into a time capsule using time machine

    How to backup an external hard drive plugged into a time capsule using time machine.
    I want to move my itunes library from the mac HD to an external plugged into the time capsule, but I want to be sure this drive will still be backed up by time machine.  I currentlly see no way to do this.

    There is no way. You can connect the drive to your Mac and remove it from the Time Machine exclusion list. Then it will be backed up, but that will stop when you reconnect it to the TC. While it's connected to the TC, you can copy it manually to another AirPort Disk by following the instructions here (with a slight modification):
    Using AirPort Utility to make a copy of the Time Capsule disk

  • I just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

    i just saved my iphoto original library to my external hard drive, now how do i create new space on my hard drive and create a new iphoto library

    Trash the copy of the library you just moved. Then Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    But do you want to have two iPhoto Libraries? Why not just use the one on the External?

  • How to remove a partition of my hard drive

    I have an old 2007 HP Pavilian DV6000 series with Windows Vista. At some point, one of my husbands friends had the bright idea to partition the hard drive and put Linux (Ubuntu) operating system on my laptop. I haven't used this laptop in a few years now because once he did that the laptop has been screwy ever since. I want to remove that OS and remove that partition. I don't have a recovery disc to do a factory reset, I've tried that and I've tried restoring to early point and nothing is working. So how can I un partition that part of the hard drive and remove that horrible OS?? Vista is still on there and I can still access Windows, but I just want my computer back to how it should be. Thanks!

    Hi 
    Welcome to the Forum please try these steps given below this might help you to fix your issue.
    Disclaimer
    You are using this guide at your own risk. I don't take any responsibility for any problems.
    Important information
    Please create a set of recovery discs, Windows Vista or Linux System Repair Disc and back up all important data before you will do anything.These steps will save you a lot of troubles if something will go wrong.
    Table of Contents:
    A How to use the guide
    B Basic information which you need to know
    C Our problem
    D Possible solutions to the problem
    E Pros and cons
    F Convert the C partition
    G Remove the HP_TOOLS partition
    H Remove the RECOVERY partition
     I  Remove the SYSTEM partition
    J  FAQ
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • How to put a recovery partition on the hard drive

    How can I create a recovery partition on the hard drive of my laptop. I had to reinstall the whole system, and tried to use the HP recovery software they sent me but it quit when it was about three quarters the way finished. I had to use a copy of windows 8 to put the system back on my laptop. After I got it all straighten out, I updated it to windows 8.1 and it seems like the computer runs a lot faster with windows 8.1 on it. Now I need to find away to install a recovery partition on my hard drive.
    Thank You
    Garry Crist

    When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
    The above requested information can be found on the bottom of the computer or inside the battery compartment. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
    A Recover partition is something the factory places on the computer. It is an image of the factory installation and the software required to restore the computer to a factory like state using that image. You will not be able to create a Recovery partition on your computer unless you use the HP Recovery Discs to return the computer to a factory like state. Please note the HP Recovery Discs and the resulting HP Recovery partition will only contain an image of Windows 8 that cannot be updated to reflect the installation of Window 8.1.
    My suggestion is to use the Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is. If your computer developes an issue or you need to replace the hard drive, all you have to do is "restore" the image to the computer. You will need to use an external USB hard drive or other media to store the image. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and storing a "Windows - System Image Backup."
    If you have any further questions, please don't hesitate to ask.
    Please click the white KUDOS star to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How do you remove photos permenantly from the hard drive using iPhoto 11?

    Was just wondering if this is possible as removing photos in iphoto leaves them on the hard drive and I don't want to waste disk space.

    btw it's set not to copy photos into the iphoto library
    This creates the problem.
    When you opted to run a Referenced Library you took on the resposibility for managing the files. You get the from the camera to wherever you store them, and if you want to delete them you get them from there to the trash after deleting them from iPhoto.
    iPhoto will not delete files it does not manage.
    Regards
    TD

  • How do you save your DVD to your Hard Drive, and then convert to iPod?

    Hello everyone, I was wondering how you save your DVD to your hard drive and then convert it to the iPod Video.
    Please respond.
    P.S.
    I know that it's been discussed all the time, but none of the posts are useful for me.
    Thanks

    Hi,
    The best option is to pull the card out and plug to your computer UNLESS your computer does not have a card reader. If your computer did not have a card reader, you need to map the cardreader on your printer to your network using the following method:
        http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00149194
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I delete a partition on a hard drive?

    I have a 2012 MacBook Pro with OS X Lion (don't know the version), I installed windows 7 shortly afterwards and primarily used that. I've now sold the laptop but need to delete the windows partition and that's where the problem started. The original Mac partition stopped working, so I deleted the content on the bootcamp partition and reinstalled OSX onto that one, now I am unable to delete the original partition so only half of the 500GB hard drive is available to use. Can anyone tell me how to delete the old partition so I can then just re-install OSX so it's ready for its new owner? I also have two recovery HD partitions. Please help!

    make it easy, kill 2 birds with 1 stone
    reboot holding 3 keys - option, command, r - you should see a spinning globe, if not try again
    open disk utilty, select your HD on the left and erase/reformat as mac journaled
    exit du, choose install OSX
    result - no more windows or other random partitions and a fresh OSX like out of the box

  • How can i remove write protection from a Hard drive

    Cant write to HDD on win7 keeps saying "the disk is write protected"  Drive is in a removable IDE caddy, I put the drive in a USB caddy and was able to format the drive, but still get the same error when i try to write to it, I took ownership of the drive and it shows me as the owner. The drive was used in XP previously but i no longer have an XP system since upgrading to Win7. I have removed the partition with Paragon drive copy and re partitioned the drive, renamed the drive but still gives the same error.

    I used succesfully diskpart (on my Windows 7).
    In "Command prompt" (Start -> Run -> cmd) type "diskpart" and press enter.
    (I wrote "cmd" and then on right click menu I clicked on "Run as administrator").
    In diskpart utility (in the same dos window) you have to type "list volume".
    You can see your disk (I see all my 4 partitions on the disk that give me the problem) with a progressive number index.
    Type "select volume #" and press enter, "#" is the number corresponding to your disk/partition.
    Wait the response.
    Then type "attributes disk clear readonly" and wait (I wait 2/3 minutes) for the result.
    It says that operation was completed, and I can write on my partitions (and run checking/scanning on it).
    Hi,
    The hard drive I had problems with had 3 partitions and at least one was write-protected. Just to make sure I used the above "diskpart" commands on each volume and it cleared the write-protected attributes and was able to format the 10Gb partition I used
    just for storing the Pagefile.sys file.
    The write-protect attribute on this WD AV 1Tb h/drive may have been added as it was previously used in my Foxtel IQ box. I used Ghost 11.5.1 to clone my failing WD 1Tb h/drive that had 1376 delays and 50 bad sectors when scanned with HDD Regenerator
    onto the previously used Foxtel IQ h/drive.
    Cheerz ;)
    Thanks again, I was pulling my hair out to find a solution.

Maybe you are looking for

  • How do I take a date string, add "X" days to it, and display a new date?

    I have a date listed in a text string. I would like to convert it to a time stamp, and take a variable number of days, converted to seconds, added to the date, and displayed as a correct date. Example: 9/1/2011 adding 35 days is 10/6/2011. The trick

  • Where are RAW files kept in iPhoto?

    I just recovered a bunch of photos from an SD card I accidentally erased.  (Eh, they were just my 17-month year old's first Christmas Eve with Santa, no big deal, right?) Thankfully, I was able to recover them using a utility called CardRaider. (Wort

  • Spacial characters in art name or UID

    While assigning the art name or UID for a text object, observed that, special characters like _, | are replaced by the AI with some pattern of characters. If the requirement is to assign the art name including special characters, how to assign?

  • User Defined Function Issue with Inbound Node

    Hello Guys, I have some doubts to do the some code with a UDF. I do a call to an RFC to get some data of R/3 from PI. In the return I have: <item>   <field1>   <field2> </item> The item is 0 to unbounded, and I have to do a loop at the item and take

  • Apply Patch 9593176

    Hi, Windows xp oracle form 10.1.2.0.2 How to apply patch 9593176 ? there is no tool for that ? Regards