Hi, How to change date pattern in project panel in order to sort media according to date YYYY-MM-DD and not MM/DD/YY ?

Hi
Question is in the title
I have the list of media and when I add columns from "metadata panel to the project panel, all dates are MM/DD/YY format and sort is not relevant !!
Where can I change this pattern to the right one ?
Thanks
Emmanuel

If you are on a PC then the instructions shown here should work for you. They did for me.
Change the display of dates, times, currency, and measurements - Windows Help
You just need to quit out of Premiere Pro after making the change and then start it up again.

Similar Messages

Reading config data in a project panel for a jDev 10 Extension

I have made it past creating config and project setting panels as jdev extension. My question is how can I read the config data when the project panel is displayed? 1) I would like to use the config data as default when the project is first created and/or 2) the panel extension is first accessed. Thanks!

Thx Olivier,
The problem is that I need a functionmodule that can apply the OLAP aggregation for a hierarchy to the data outpu from RSDRI_INFOPROV_READ_RFC.
... or the best alternative would be if there were a fm/class that could provide me with the hierarchy aggregation of the data.
/Martin

How do you find a notification for Ask to Buy for Family Sharing once it is off your screen and not in drop down Notification Center?

How do you find a notification for Ask to Buy for Family Sharing once it is off your screen and not in drop down Notification Center?

Welcome to the Apple Community.
I don't believe you can.

How to change hover size in Spry panel but not rest of site?

Hi guys, I need to add more tabs which means I need to reduce the font size of my H2 style and its hover state. However, when I adjust this to be 10 pt in sprytabbedpanels2.css it stays at 14 in live view until I also change the setting to 10 pt in my Arrowmark.css file, which then stuffs up the hovering behaviour of links elsewhere in my site.
Is there a way to adjust the hover only in the tabbed panels style sheet and not affect the rest of the site? Or am I doing something wrong?
My site is at www.wakatipucollection.co.nz/wholesale
Thank you in advance for assistance.
Jo

Most welcome m'lady +
How about bumping the font size up to12px to give us old guys with 80-year old eyes a break.
You'll also need it on line 126 here:
.TabbedPanelsTab {
cursor: pointer; font-size: 12px;
list-style: none outside none;

How to change the general Ledger of a purchase order in mass

Hi,
In our company, we change the General Ledgers, then, and we have plenty of purchases orders take the old general ledger, we want to change this general ledger by the new in each purchase order in mass.
I found in BAPI, customizing, in user exit, I tray with the transaction MEMASSPO not solution.
Can you help us for change the General Ledger in the purchase order in mass?

Hi,
You ask ABAPer to write a program in that program you give one text file as input with old GL and new GL corresponding to that old GL so that the program will replace it with new GLs.
firat extract all POs which you want and give those PO numbers and GL text file as input in this program and execute

I want my pictures and videos to be sorted by the time and date they were taken. I have Lilghtroom sorting by the creation date, but the videos are sorting separately from the pictures even when the creation dates indicate they are out of order.

I have set the sort order to be by the creation date of the pictures and media I have in the catalog. But the pictures appear first, in chronological order, then some of the videos follow, in their chronological order, but the videos and pictures don't mix amongst each other in straight chronological order. How can I fix this?

I think it’s only possible to see raw and jpeg stills side by side e.g. in true chronological order after setting LR prefs. Your video files will automatically show up in the Video smart collection. So you can view them in one place regardless of which folders they are stored in. Otherwise move your images and videos into a new collection and drag them into the order you want, where they will remain fixed. Or use the library filter to define a date range.

How do I get the color of the address, in the address box, to be all black on white, and not part of it to be gray on white, and part to be black on white?

Right now, the address line in my address box, at the top of the page, begins "https://support", all in light gray, followed by "mozilla.com", in black, followed by "/en-US/questions/new?product=.......etc.", all in light gray on a white backround, so it is almost unreadable. Why did this start happening, and how do I change this, so that the address is all black on white, and not half gray and half black?

You can set the pref browser.urlbar.formatting.enabled to false on the about:config page.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

How you can solve a problem or find out on a dead pc if the problem relies on motherboard and not on processor or vice versa

hi.
I am working myself with computers , so there is one thing in my mind I wanted to be sure,which I couldn't find an answer for it!
because I had before totally black screen and the problem was damaged processor.
I am wondering how I can be sure as the last option when I get a black screen and there is no lihgts at all no any LED is lighting.totally dead pc.
how you can be sure then that the problem relies on processor and not on motherboard or vice versa the problem relies on motherboard and not on processor
because I can't say to the customer lets buy first a processor if it is the cause of dead PC and if not then we buy motherboard. this sounds not wise.
so I experimented first with my latop ,I pulled out the processor to see if I can see any LED light or any movement on the motherboard to be sure that motherboard giving me some clue that it is healty. I gave some light heat to de fan to let it turn ,because
it is working with heat sensors then I know that the motherboard is healty. but it didn't work.
I did the same with my desktop computer and the result is the same no any lights and no any movement on the motherboard . so now can some one tell me how you can distuingish as a last result which of this 2 components is causing dead PC. is there any
tool to test the motherboard or how asus,dell ect. they solve such a problem if the customer send to them a dead pc.
I know that the power supply also can cause dead pc but I know how to solve a problem with dead power supply. and I want to keep away power supply from this question. please do not tell me that Idon't have to pull out processor
because I am a technician and both of my computers are doing very good after this experiment.
thanks
johan
h.david

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

HT1390 How do I rent a movie from my PC on iTunes to only be played on my Apple TV and not downloaded to my PC?

How do I rent a movie from my PC on iTunes to only be played on my AppleTV and not downloaded to my PC?

Welcome to the Apple Community.
You can't, if you don't want it on your PC, rent it from your Apple TV.

HT1937 in general setting for itunes wifi sync some how i got two folder first one the one i want :apps,movie, music, and tones some how i got second one is photo only, when i plug in it's only sync on 2nd one and not first one, i tried delete ituns and d

i had problem for my itunes wifi sync, in general setting itunes wifi sync, i got 2 folder name 1st one is one i want sync for app, movie,music and tones, somehow i got second one folder i dont want is photos only when plug into it only sync for photo the rest are gone on itunes screen and not sync, please help me how can i delete second one folder? i tried click on first one not moved and syns only sync on second one folder
thanks. i did try delete itunes and download back but still there, i tried restore iphone to itunes a few months back but itunes screen still on new second folder not the first one
mjphu
[email protected]

I own the movies and I want them to stay in my iTunes library basically forever.
But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
iTunes prefs > Store > Show iTunes in the Cloud purchases.
This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
Also see this , -> Download past purchases
and techncially, you don't "own" the movie, You simply have a license to use it.
Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
Actually, no it does not tell you that.
FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
Suggestions here -> http://www.apple.com/feedback/

How to change the value of project data in the BPM instance?

Hi Everybody,
I have a situation that after the bpm instance was created. We found that one of the project data/variable contains the incorrection information. Is it a way we can change the value of that project data/variable? I checked the BPM workspace, as administrator, there are not function for it and we can't stop/withdraw the instance. Can we change the MDS database for it? Please advise. It is so important for us that will stop us to move on of our project.
Thanks

As per my knowledge we can not change the value of BPM project variables from outside BPM. If you look at PAPI API also you will find methods to get values from BPM but not to set to BPM.
If this is daily issue for your application then change your design to add a Edit Data Activity (Screen) and then use Grab functionality to get the control to this Edit Data Activity to change the required data.
Else if it is an issue with the only one instance then it is better to Abort this instance and re-create the instance with correct data. Changing value in the MDS database is not encouraged.
Hope this helps.

How to change default value in "Project file" dialog

I'm new to Labview, and I've encountered an example with a dialog that allows to define a path to a file. If I open the properties on the block diagram of this block the name of the block appears to be "Path Properties: Project file:" The default value points to a different place than where the file installed and the VI won't run untiI I change the path. If I save and open the file, it doesn't remember the change. When the vi is running I can right click the text and there is an option to reinitialize to default. I've rooted around all over the place and can't find where this can be set or changed. How do I change this?

On the front panel, change the control to the desired value.
Now, right click on the control, select Data Operations and Make Current Value Default.
-Matt Bradley
************ kudos always appreciated, but only when deserved **************************

How to change the default new project folder in Premiere Elements 13?

I keep all my projects on a different drive than the default My Documents folder. How can I change the default setting so that Premiere Elements does not try to create new projects in the My Documents\Pemiere Elements\13.0 folder? In fact, I do not want that folder to be used for anything (including layouts and styles).

steveb
Short version....
Referring to the 13.0 Folder in the Adobe Folder in documents, you wrote
In fact, I do not want that folder to be used for anything (including layouts and styles).
I do not believe that is possible.
For my best case scenario
Set the Scratch disks, not to Same As Project, but set for Custom with the set being the save location that you set for the project file.
Set the project save in, my preference, File Menu/Save As.
You are going to end up automatically with a 13.0 Folder in the Libraries/Documents/Adobe/Premiere Elements/13.0 Folder every time you open a Premiere Elements project. No matter how many times you try to delete the 13.0 Folder. And that 13.0 Folder will contain a Layout Folder and, if you applied a Style in the project, a Styles Folder.
Longer Version....
There is no problem directing your project file to the save location of choice. You can do that two way
1. After you open the project to the Expert workspace, go to File Menu/Save As to change the name of the project as well as the location for the save in order to avoid the defaults.
2. You can also do that through File Menu/New/Project.
That 13.0 Folder also gains its contents from the settings of the scratch discs in Edit Menu/Preferences/Scratch Disc - some examples preview files, disc encoding files, conformed audio files... Some Files/Folders are placed there automatically. So what to do to keep the Documents area clear of Premiere Elements files, project or otherwise after you have move all that you thought you could to a non Adobe default location? See above best case scenario.
Miscellaneous
1. If you set the save location of the project in either of the 2 ways, that setting will not hold from project to project. It will hold for that particular project.
3. If you set the Scratch disks in Edit Menu/Preferences/Scratch Disks, those settings seem to hold from project to project as well as for in the particular project.
Stevenb, please review and consider and verify. I have gone through several scenarios on what you would prefer. But, I do not see a way to make that happen with the programming that exists.
ATR

How to change Time (Zone) that Project On-Line install defaults to

We are using Project Online. and the time displayed eg., Job Queue, is 3 hours behind. ie., it is displaying Pacific time, but we are in the Eastern Time zone. Can we change it? If so how?
Thanks in advance,
\Spiro Theopoulos, Montreal, QC (Canada)

Hello,
There are certain areas in Project Online that will display the time zone incorrectly. All you can do is change the Regional Settings for the PWA site collection but that will not update all times as you have seen. I'm not sure if this is something
that will be resolved in the near future or not. It might be worth you opening a support ticket via the Office 365 tenant so that all the requests can officially be logged / tracked.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads

How to change actual effort in project plan when Projected Actual option is enable in Project Server 2010

Hi,
We have enable "Protect User Updates" option from PWA->Task Setting and Display->Only allow task updates via Task and Timesheets, to protect actual efforts in project plan that PM changes manually, however in some cases we need to allow actual
effort changes in open projects so it there any way or workaround so that Administrator or PM can make changes in actual even though "Protect User Updates" option is enable. Please Help!!
Thanks,
Rahul

Hi Rahul,
Indeed when this option is activated, there is no way to directly update actual work in the project plan.
The workaround is to temporary deactivate this option, more preferly not during office working hours to avoid unexpected project updates.
A better workaround would be to ask the resource to recall, correct and submit again the timesheet, so the PM can approve an updated actual work. Finally the PM can use delegation to rscall and correct the timesheet for the resource.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Hi, How to change date pattern in project panel in order to sort media according to date YYYY-MM-DD and not MM/DD/YY ?

Similar Messages

Maybe you are looking for