Hi how to create logical systems.
Hi,
how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
thanks
dhanush.
Hi,
transaction:
SALE -> Basic Settings -> Logical Systems -> Define Logical System
No, you don't need to create Logical Systems to define RFC destinations.
Regards,
Jakub
Similar Messages
-
Hi,
How to create logical system.
Please help me with the steps for logical system creation in R3 system.
Thanks,
KellyHi,
First make your client modifiable, then follow the below procedure.
Go to transaction SALE or BD54 -> Sending and Receiving Systems -> Logical Systems -> You'll see "Define Logical System" and "Assign Client to Logical System".
For more information use below link.
http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
Thanks,
Mano -
How to create Logical System for ALE?
Hi All,
I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing". Help with proper documentation.
Thanks in Advance.Hi,
what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
Here i am giving link go through that and do practice,
http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Reward if it useful
lakshmi. -
File to idoc scenario . how to create logical system
logical system asking user authorization what should i do.
what should be logical for whic we should degine partner profiles
apoclnt800 or xi7clnt001Hi,
The partner profile to be maintained in we20 (in backend systems -ECC/CRM etc) should be based on logical system for the sender.
For ex: Src (File) -> PI -> Tgt(ECC)
In SLD you have created Technical System(TS) and Business System(say BS) for Src. Also a Logical System name (Say LSNAME) is associated with BS.
In ECC, goto tcode - sale, create a logical system of name LSNAME. Now goto we20 and create a partner profile of name LSNAME. Provide the message type of Idoc in the required place.
Souvik -
Create Logical System in R/3 system
Hi all,
I am trying to define logical system for xMII server in R/3 system using SALE transaction. But the logical system for xMII server doesn't already exist. So I have chosen to create one. Seems there is format like <sys_id>'CLNT'<client>.
1) How to create logical system for xMII server in this format?
2) How does R/3 know in which host xMII server is running? Do we specify that somewhere? Is there any other configurations for linking xMII host and logical system?
I am new to xMII and so not aware of the steps. Please help me out.
Points will be rewarded for helpful answers.
Regards,
Harini SHarini
Welcome to xMII.
Though i nvr used such things from the SAP R/3 system side, i think the logical system name format must be something like <b>SAPSYS<Number></b> for SAP Connection <b>BUSCON<Number></b> for Business Connector. After hving defined the Logical System in R/3 System, u need to configure the <b>SAP Business Connector Interface</b> Action in xMII-based Business Logic Services.
In additional to this, hope this following links will help u to understand more
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3861e693-0e01-0010-e791-9b44d2693e6c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/201769e0-3174-2910-e287-baa58d198246
Wait till there comes other some suggestions/solutions for ur quieries
Best Regards
Som -
Hi all,
Is this possible to assign the role, based on the organization structure?
In which SAP system stores organization structure in it.
How to create the SAP system to store my organization structure through EP.
Helpful answers will appreciate.
Thanks.
Regards,
Kathiresan RHii
How to create sap system:
Steps:
Go to System Administration
2) Go to System Configuration
3) Go to Portal Content (Right Side Panel), open that folder.
4) Right Click on Portal Content, a Panel is displayed select "System (from Template)".
5) That will display a new view on right side, now select "SAP system using dedicated application server" from
the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
For this exercise, we'll use the simplest type.
6) Choose next
7) Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
about the system then give them in the "Description" field.
8) Open the Newly Created System.
9) Now when you want to create a New System, you have to fill four Properties they are:
"Connector" - contains basic connectivty details
"Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
"Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
"User Management".
You also need at least one "System Alias" has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
10) Select "Connector" property, now fill the required fields such as:
a) Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
it will open a window which has the Application Server Name.
b) Logical System Name - Give the logical name as defined in the backend system
c) SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
d) SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
e) System Type* - Since we are connecting to R/3, select SAP_R3 system.
f) System Number - This is a two digit number that you can find in the SAP Logon Pad
11) Select "Internet transaction Server (ITS)" property, now fill the required fields like
a) ITS Description à Give some Description
b) ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
c) ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
Transaction Code "SICF", it opens a new window go to:
default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
d) ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
visible when you opened "Test Service" window.
12) Select "Web Application Server" property , now fill the required fields like
a) Web AS Description -> Give some Description
b) Web AS Host Name - same as ITS Host Name
c) Web AS Path - usually /sap/bc/bsp/sapd)*
Web AS Protocol - should be same as the ITS Protocol.
13) Select "User Management" property, now fill the required fields like
a) Authentication Ticket Type - Since we are not using SSO leave the field
empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
b) Logon Method - Select UIDPW.
c) User Mapping Type - In case you have administration rights then you choose "admin" or in case you
just have user rights then choose "user", better go for "admin/user".
14) Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
15) Now that System is created we have to create a iView which will display the given Transaction Code.
16) Go To "Content Administration".
17) Go To "Portal Content".
18) Go to Portal Content (Right Side Panel), open that folder
19) Right Click on Portal Content, a Panel is displayed select "New" -> iView
20) Select iView template, click next
21) Select "SAP Transaction iView" from the list of templates available. Click next.
22) Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
23) Select "SAP GUI for HTML" radio button. Click next
24) Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
25) Now Preview the iView
26) You will see a new Window where in SE12 Dictionary Display window is displayed.
Thanks :
Dont forget to give rewards if usefull. -
Why do we create logical systems in ALE?
Hi All,
i got this question in interview.
Why do we create logical systems in ALE?
Thanks & Regards
sureshHi
In addition to above .
A logical system is used to identify an individual client in a system, for ALE communication between SAP systems. That's why you see a field for 'logical system' in the client master data in SCC4 (table T000).
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements
http://help.sap.com/saphelp_nw04/helpdata/en/b5/1d733b73a8f706e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/69/c24ca94ba111d189750000e8322d00/content.htm
http://72.14.203.104/search?q=cache:J-uDLyT0w54J:www.topxml.com/biztalkutilities/walkthroughs/SAP%2520Configuration.pdfwhatislogicalsystems+(SAP)&hl=en&gl=in&ct=clnk&cd=5
http://help.sap.com/saphelp_nw04/helpdata/en/78/217dc151ce11d189570000e829fbbd/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/d7/9c73631d6c11d2a56e0060087832f8/content.htm
This guide is really good shows step by step procedure.
http://72.14.203.104/search?q=cache:Xyl0zxpyEXsJ:www.sappoint.com/abap/ale.pdfLogicalsystem(ALE)&hl=en&gl=in&ct=clnk&cd=9
for one client config
http://www.sappro.com/downloads/OneClientDistribution.pdf#search=%22Logical%20system(ALE)%22
Please reward for the same. -
PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping
Hi
We ve go a Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
Thanks in advance
MichaelHi Michael,
Please refer here for the mapping API description:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
Hope this helps,
Greg -
SAP* or DDIC being unable to create logical system in SAP PI 7.1
greetings !
I am not a basis person.
I had freshly installed PI 7.1. I was finding that I am being unable to create new logical systems . I tried logging to both clients 000 and 001 using sap* , ddic , and pisuper . pisuper does not even have the authorization to execute SALE . SAP* and DDIC can excecute SALE but unable to create or assign clients.
I reinstalled my system from scratch thinking i must have errored on something, as creating clients is a very simple task. but even the new PI 7.1 gives me the same problem.
is something wrong with my installation , or there are additional roles/authrizations I need to assign to a user.
regards
rishiBesides PISUPER other users are also created some of the are PIAFUSER, PIDIRUSER, PIRWBUSER etc. Every user has a specific purpose in a PI system. For activities like creating logical system etc. own id's should be used.
There are couple of guides out there which explains in detail the purpose of all the users in PI system.
Hope this helps.
Thanks,
Naveed -
How to Create a system in portal server
I am trying to do the tutorial: How to Create a JDBC-based iView for Add/Update/Delete Record.
Its pre-requisite is: A system with an alias JDBC defined on your portal server, and mapped to a database.
Since I am new to VC, I do not know how to create a system, and I also do not know how to access the portal server.
Please help...Hi Makarand,
Do you have any one who has the access to portal with administrator rights. I am hereby sending you the steps on how to create a system.
To define a system:
1. Create a new system; define all its properties
2. Create a default system alias.
3. Create a user mapping (from the user you use in VC) to the system alias, using the user\password to the backend system.
4. TEST the connection in the portal. If the test succeeds, it should be visible in VC discovery panel.
VC retrieves the systems via the portal.
You have to define the systems or use the defined systems in the portal you are connected.
To define systems in the portal:
System Administration => system configuration => system landscape:
in the PCD: right click on a folder and Add new system.
Then you have to define all the mandatory properties: Connector / Was / User management ...
dont forget to map your portal user with an R3/JDBC user...
thank you very much. -
Hi,
I wanted to know how to create a system in VC without integrating with NW04s?
when i click on Find data i am not getting any list in systems.
Please let me know how can i get it
Edited by: Kavitha Bhat on Feb 11, 2008 12:04 PM
Edited by: Kavitha Bhat on Feb 11, 2008 12:05 PMhi kavita,
Go to Tools->Options
1) Uncheck (Mask unsupported features).
2) Try changing Runtime to Dynpro.
Hope this will solve your Prob.
Awards will be welcomed!!!!
Regards
parth
Edited by: Parth on Feb 12, 2008 3:13 PM
Please close the thread is your question been answered -
How to create Source System in BI 7.0
Hi Experts,
How to create Source System in BI 7.0, please urgent
ThanksHi Mark,
Did you see the help site below which is telling how to create a source system .If not please take a look at it.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a61e5e07211d2acb80000e829fbfe/frameset.htm
Regards,
® -
How to create a system parameter in Apex
Hi friends,
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
Regards,
Pradeepbluerose wrote:
I am new to Oracle Apex and need to know how to create a System Parameter in Apex. Kindly let me know how to add one.
using the privileges we can achieve this.Although I am not new to APEX I have no idea what you are talking about.
What is "a System Parameter in Apex"? What "privileges" are used to create one?
You'll find it easier to get help if you use terminology that is familiar to everyone... -
How to adjust logical system after coping PRD to QAS in tabels
Hello
I wonder how to adjust logical system after coping PRD to QAS in tabels. I know (the logical system changes) but there is a transaction which adjustes entries in tabeles...>
Tina Tajnist wrote:
>...but there is a transaction which adjustes entries in tabeles...
SE14 -
How to create logical file name
Could some one tell me how to create logical file names in BW , and when to use the transaction SF01.
ThanksThe following describes the procedure for creating a cross-client definition using the transaction FILE.
You create the client-specific definition in the same way using transaction SF01.
1.Call transaction FILE for cross-client file names.
2.Double click the dialog structure Logical File Name Definition, Cross-Client.
You access the screen Change View "Logical File Name Definition, Cross-Client": Overview
Maybe you are looking for
-
Error in MIRO - " No taxes on sales/purch.are allowed for account 174600
Hi freinds, a have created new condition type for PO maintained the same Pricing procedure also .now my problem is while doing miro it is showing an error that " No taxes on sales/purch.are allowed for account 174600 1000, V0 is no is not allowed " p
-
Reading Data From XML File to SQL Tables.
I Have XML of this type <empdept> <employees_marks> <emp_id>1</emp_id> <DIVISION_ID>BUS</DIVISION_ID> <JOB_ID>PRE</JOB_ID> <FIRST_NAME>SMITH</FIRST_NAME> <LAST_NAME>JAMES</LAST_NAME> <salary>10000</salary> </employees_marks> <dept> <dept_details> <de
-
Like operator not passed to database for nvarchar(max)
From Crystal Reports 2008 I need to do a keyword search against a data type of nvarchar(max). I am using the LIKE operator in my record selection formula. When I do a SHOW QUERY the LIKE condition is omitted from the where clause. This makes the repo
-
My Powerbook 1.67 w/ Tiger slow...
So recently, my powerbook seems to be running very slowly...takes more time for websites to load, etc. Now, when I drag the mouse to the dock, it takes a long time for it to pop up (if it does at all). I wonder if my system is bogging down, is there
-
Adobe Application Manager is failing to update. It gives me an error message at the end when I am trying to update