Hi how to handel the lock and unlock the table
Hi,
i am having the one scenario like,for lock and unlock the table i used the function modules ENQUEUE_E_TABLE and DEQUEUE_E_TABLE but it allowing the edit the first user and suppose to try the editing the second user it is giving the error message it correct but again the second user press any button it is leaving the program it should not happened please help me that.
regards,
Hari.
Hi,
i assume it's in table JEST
so select:
SELECT * FROM JEST
WHERE OBJNR = aufk-OBJNR
AND STAT IN S_STATI
Andreas
Similar Messages
-
TS3274 How do I lock and unlock the vertical/horizontal screen positions?
How do I lock and unlock the vertical/horizontal screen positions?
Use the Side Switch or Rotation Lock in Control Center.
-
Need to Lock and unlock the fn key freely
I just today purchased the HP g72-b66us notebook. An MMO that I play uses the f # keys at the top of the keyboard for integral aspects of the game on a regular basis. Thus far I have had to hold the fn key down and that hampers gameplay ability drasticly. I'd like to be able to lock and unlock the fn key the same way one uses the number lock or caps lock. Please advise.
You Can disable that functionality by disabling "Action Keys Mode" in the BIOS...
Here is the document, that will help you with it... http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks" -
FM to Lock and Unlock the Tcode CJ02
Hi,
I want to lock and unlock the Tcode CJ02, my code is as below.When I am executing the Report, I am able to create the Settlement Rule in first Row but I am getting an Error Mesage saying " Subproject 4-0123-02-01-01-10-01 is currently processed by USER" though there is no other session open under the user name when trying to create settlement rule in second row in the loop. Wbs element that ima using for creation of settlement rules is "4-0123-02-01-01-10-01".
loop at it_src into wa_src.
Lock the Tcode 'CJ02'.
Perform BDC Recording to Create Settlement Rule.
Unlock the Tcode 'CJ02'.
endloop.
Regards,
Deepthi.Hi, you can block the Subproject with Lock Object, you can create this under SE11
after you have created this, use these FM for Enqueue/Dequeue,
call function 'ENQUEUE_EZ_ODAPROF_PO'
exporting
mode_ztma_odaprof_po = 'E'
mandt = sy-mandt
ebeln = cod_oda
ebelp = cod_pos
exceptions
foreign_lock = 1
system_failure = 2
others = 3.
call function 'DEQUEUE_EZ_ODAPROF_PO'
exporting
mode_ztma_odaprof_po = 'E'
mandt = sy-mandt
ebeln = cod_oda
ebelp = cod_pos -
Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even though the iphone is in warranty.
iPhones do not have an international warranty. Warranty is valid only for the country of purchase. This is most likely because different countries require different iPhone models. Not reasonable to expect all countries to maintain stock for all models.
-
HT1430 The locked and unlocked button is not working very effectively.
The locked and unlocked button is not working very effectively.
Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Lock and Unlock a table:AFVU
Hi Folks.
I want to modify a standard table (AFVU ) with new user dates from User.For this,First I need to lock and unlock the table.
When I am trying for the standard table lock object (EAFVU) ,it was not there in the system.
Is there any way to find out the lock object for a particular table?
How to proceed for this?
Any Pointers are much helpful.Hi,
Go to SE11 and display your table - do a where used list and select lock objects.
I really hope when you say you are modifying a standard table you are only updating custom appends on that table, and not directly updating standard SAP fields...
Gareth. -
Can I use my fingerprint to lock and unlock the iPhone?
Will it be possiable for iphone users to use their fingerprint to either lock and unlock thier devises?
No
-
How to capture the LOCK and UNLOCK status of an Internal Order
Hi,
I am trying to upload the data for transaction KO02. The order can be in LOCK status or UNLOCK status. Could you please let me know how can we determine whether an order is locked or unlocked. Is this data stored in some table. Help is very much appreciated.
Thanks in advance,
Suresh.Hi,
i assume it's in table JEST
so select:
SELECT * FROM JEST
WHERE OBJNR = aufk-OBJNR
AND STAT IN S_STATI
Andreas -
Terminal command to lock and unlock the dock?
Hello,
I manage hundreds of iMacs running Yosemite at a school site. I use parental controls with the lock dock feature turned on. I would like to periodically unlock the dock to customize it with new icons, but have not found a terminal command that works, or a streamlined process that is time efficient.
So far I have been individually unlocking the dock in parent controls on each machine, restarting, editing the dock, then re-locking it parental controls, then restarting. This takes 5-10 minutes per machine).
I also tried this command but it didn't work.
defaults write com.apple.dock contents-immutable -bool true; killall Dock;
I also tried cloning the parental controls with an exported plist file to all the machines using ARD, which works for all the parental control settings EXCEPT for the lock dock feature.
Any ideas?
Cheers,
CrystalSorry this is probably too late for you, but it may help others seeking this answer, I just had this problem [Mac OS x Yosemite 10.10.2] and found that the following worked for me:
1. Use Terminal to LOCK the Dock by C&P or typing in:
defaults write com.apple.dock contents-immutable -bool true
Then use your preferred method to Log-Out [e.g. Key Combo ⇧⌘Q or [Top Left Menu] then select Log Out “name”]
and then Log-In again.
2. Use Terminal to UNLOCK the Dock by C&P or typing in:
defaults write com.apple.dock contents-immutable -bool false
Then use your preferred method to Log-Out [e.g. Key Combo ⇧⌘Q or [Top Left Menu] then select Log Out “name”]
and then Log-In again.
NB. You will be solely responsible for your actions making changes to the Operating System. -
How to find out lock and unlock iphone
ActivationState: Activated
ActivationStateAcknowledged: True
BasebandVersion: 1.0.13
BasebandChipId: 5898465
BasebandGoldCertId: 2
BluetoothAddress: 78:a3:e4:f0:4f:6f
BuildVersion: 9A405
CPUArchitecture: armv7f
DeviceClass: iPhone
DeviceColor: white
DeviceName: xxxxxx’s iPhone
FirmwareVersion: iBoot-1219.43.32
HardwareModel: N94AP
ICCID:
IMEI:
IMSI:
MLBSerialNumber: C0************41D
MobileSubscriberCountryCode: 510
MobileSubscriberNetworkCode: 10
ModelNumber: MD261
PasswordProtected: False
ProductType: iPhone4,1
ProductionSOC: True
ProductVersion: 5.0.1
ProtocolVersion: 2
ProximitySensorCalibration: CM
RegionInfo: ZA/A
SIMStatus: kCTSIMSupportSIMStatusReady
SerialNumber: C3*******TDV
SupportedDeviceFamilies: 1
<Edited by Host>I don't know why you're posting this on Apple's boards. While Apple manufacturers iPhones, CARRIERS lock them. Conversely, only CARRIERS can unlock them.
If you want your phone unlocked, contact the CARRIER. This has nothing to do with Apple. -
Hello,
I've been trying to lock my guides in Illustrator CS5 with the default keyboard shortcut "Alt+Ctrl+;", but with no result.
When i edit this shortcut via the 'Edit/Keyboard Shortcuts...' menu, and type in the same keystroke combination for that command - so again "Alt+Ctrl+;" for "Lock Guides' - the shortcut changes from "Alt+Ctrl+;" into "Alt+Ctrl+."
This new "Alt+Ctrl+." shortcut is usable. Now the same 3 different keystrokes tabbed at the same time do lock and unlock the guides, but i'm left wondering why it is that i can't use the "Alt+Ctrl+;" combination.
There now also seems to be no way around changing the new combination into the old one again.
I hope someone can help.
Thanks in advance,
JohanThanks Jacob. I can't seem to find a solution to my problem within the site you linked, but i'm still happy with it. Seems to be a great resource for answers.
-
Statement for Lock and Unlock an Oracle user (Urgent)
Hi DBAs.
I just want to know about the statement used for lock and unlock the Oracle user thru sysdba suer.
Thanks
HassanHey,
SQL> alter user <USERNAME> account lock;
and
SQL> alter user <USERNAME> account unlock;
Cheers,
Marcello M.
Sorry Justin, same answer........
Message was edited by:
Marcello M. -
Is it possible to lock and unlock a transaction?
Hi SDN,
Is it possible to lock and unlock a standard transaction( for eg VA02 ) through my program?( i am creating a customized version of standard transaction ) I want to lock the transaction for my user-id and then i will update the values in that transaction and finally i will unlock it.
I got the FM for locking at the database level.is there is any FM to lock and unlock the transaction?Hi,
It may not be the best way, but maybe you could use the functionality behind transaction code SM01. Here you can lock/unlock the transaction code. If you look at the program, all it is really doing is updating table TSTC field CINFO. CINFO = 80 when unlocked, CINFO = A0 when locked. You could just update the field accordingly and then call this function module right after.
* For locking
CALL FUNCTION 'RSAU_WRITE_SM01_LOG'
EXPORTING
TCODE = TSTC-TCODE
LOCK = 'X'.
* For unlocking
CALL FUNCTION 'RSAU_WRITE_SM01_LOG'
EXPORTING
TCODE = TSTC-TCODE
UNLOCK = 'X'.
Regards,
Ferry Lianto -
Keyboard lock and unlock for 8330
I need a way to lock and unlock the keyboard. I have searched a number of websites for an answer to my dilema and it seems several methods are mentioned but none work for me. I need to lock the keyboard when phone is in my pocket. Many thanks to anyone who can help.
Well, according to your device manual, this is the procedure:
Lock the keyboard
If you do not set a BlackBerry® device password, you can lock your keyboard to avoid making calls and pressing keys accidentally.
On the Home screen or in the application list, click Keyboard Lock.
To unlock the keyboard, press the asterisk (*) key and the Send key.
You can look further into your manual here:
http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=http--docsbl...
Good luck.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
How can I print the date and time in a photo from iPhoto
How can I print the date and time in a photo from iPhoto
-
Unable to import tables in RPD
Hi i have craeted the ODBC drivers for my oracle11g database however i am not able to import the tables from it. it says "The connection has failed" Any idea why this error is coming?
-
Error in the hierarchy structure - Data Load Failure
Hi We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message: Error in the hierarchy structure Node ID 00016749 does not exist. Node ID 000058
-
Write Off FP04 & FP04M - Check Box missing in the screen
Hi SAP Experts, I have noticed something was missing in FP04 and FP04M screens. Do you have any idea how I could activate the check box for "Release items for submission to Collection Agencies". I would need this option to get the collection agency
-
Hi, can someone tell me the clear steps for install "StarfireExt.jar"? I have copy it to both C:\j2sdk1.4.1\jre\lib\ext and C:\Program Files\Java\j2re1.4.1\lib\ext. Is it something missing? The other problem is when I run the program by using Loader3