Hi. I am Alec. Kindly assist with SAP demo screen

Hi Alec,
Here i am attaching sap Demo screen you can go through it , Here you can get details.

Similar Messages

Kindly assist with repeated failure to correctly install iTunes on Windows7 Professional. Thanks. Bobby

Could I please be assisted with recurrent failure for iTunes to install correctly on my Dell desktop running Windows7 Professional? Thank you. Bobby

Well, I found a workaround for my issue. It's described in this article:
[url="iPod not recognized correctly on Toshiba laptop"]http://docs.info.apple.com/article.html?artnum=300836[/url]
By disabling the "Sandard Enhanced PCI to USB Host Controller" in device manager, my iPod was correctly recognized and I was able to sync with iTunes. That's the good news.
The bad news is that: a) Windows warns me that my "device can operate faster if connected to a USB 2.0 port" - and the sync with iTunes runs slowly; b) if I reanable that USB device (as suggested in the Apple article, my iPod is no longer recognized.
For now, I'll just disable this device when I need to sync, then reenable it when done. But this is going to be a pain. I really don't consider this a fix. It's really annoying that the iPod is the only USB device that requires this kind of nonsense.
Looking forward to a "real" fix for this some time soon.

Seeking assistance with SAP education, training and career......

Dear Friends of SAP Community Network:
Season's greetings and a Happy New Year to all.
My name is Bob Singh from NY. Due to the recession and economic crisis, I was laid off from my job as a software solutions consultant. My background is international banking - ex-bullion and FX trader, business analysis and consulting for STP.
I would like to get trained in SAP CRM and FICO and shall appreciate your kind advice and guidance to further pursue my career in SAP.
Sincerely,
Bob Singh,NY.

Hi
Rupesh huge requirement is there for SAP-BI in IBM Accenture , tcs, and siemens.
Thanks.
Asim

I RECEIVE MASAGE THAT TARTUP DISK IS FULL. KINDLY ASSIST WITH HOW TO DECONGEST THE STARTUP DISK OR OTHER OPTIONS?

Dear all,
I have this massage that says the startup disk is full, how can I decongest it?

It would help to know what you were doing when you received the message. It is always wise to leave about 10 to 15% of your HDD capacity free so that there is plenty of workspace for temporary files and so on. If you have a lot of movies or thousands of photos (especially RAW files) then your disk very well might be reaching its workable limit. The safest solution is to have a reliable backup (such as Time Machine) where the contents are stored, then you could do a safety redundant backup of your movies, photos and audio by copying them to a different external HDD, then remove them from the internal drive. In that way they would be accessible for restoration by way of Time Machine, or they would be accessible as files from the external. The prices of external drives are now very low and affordable so the purchase of a 1TB or 2TB HDD is no longer prohibitive. Any long-time user will tell you that 'backup' + 'backup of the backup' [that is: redundant backup] is never a bad idea when working with important files. The time to do this is NOW before a drive failure not after when it might be impossible.

Issue with SAP demo data for SCPM content in BI system

Dear Expert,
"1558947 - SCPM 2.0: Loading Demo Data into SCPM"
Based on above SAP Note 1558947, we are performing the Demo data loads for SCPM data targets in SAP BI system.
However, the data is not available for any Data targets due to the reason, upload is sucessful but "Validation" is fialed.
Does any one has experienced similar situations. Please help to resolve this issue.
Thanks,
Khader

Hi Phani,
we are trying to follow above link and performing accordingly.
Please find the following steps we performed
1. we made sure that the DSO (Reporting UOM- 0SPM_DS32) and Process chain (DM: Reporting UOM (0SPM_REP_UOM) are Installed and active (as per the SAP Note 1540655) in BW system
2. Triggered the upload from front end
3. when we check the job log in BW system, the system triggers a separete process chain 0ASA_P044, insted of UOM process chain 0SPM_REP_UOM hence the load is not sucessful to the data target
4. Below is the job log for the above run
Job started
Step 001 started (program RSPROCESS, variant &0000000000136, user ID BWREMOTE_CRH)
Start process TRIGGER 0ASA_P044_VSTART in run F0KTSA5KR590X4TUQ4G7ILGD0 of chain 0ASA_P044
Event RSPROCESS with parameter BYLPP950MSCT56CM5C4QNL0N1 successfully triggered
Job finished
Could you please guide how we should proceed and correct this error.
Thanks,
khader

Problem with SAP GUI / Screen Painter

Hi
I use SAP Gui 6.4 with patchlevel 14 (tried with patchlevel 12 as well) when I try to start the screen painter I always get that error message: "Password in Router string. Cannot start grapical screen painter".
What could be the problem ?
thanx for help
Arne

Hi Steve,
please go to http://service.sap.com/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=Y&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200615320200005408&V=MAINT&TA=ACTUAL&PAGE=SEARCH and download patch 60.
This patch contains all the fixes from previous patches.
Patch 59 was pulled off the website because of a serious bug.
Best regards,
Christian

SAP Demo Financial Accounting (case study)

Hi!
I would like to start with SAP Demo Financial Account.
I downloaded the BI CONT 7.03 from service marketplace and can see the appropriate Info Provider.
I also integrated the SAP ECC IDES 6.0 system into BI system via RSA1 --> Source Systems --> BI
--> ERB Client 200
My questions:
1) How to load the accounts payable and accounts receivable from this SAP ECC system for this example in order to execute queries for this data?
2) Can I change the data here? (e.g. characterictic, etc.)
3) Where can I find the further documenation for this issue?
Thank you!
regards

HI
Help.sap.com would be the best source for the same.
http://help.sap.com/saphelp_nw70/helpdata/EN/f1/b0833b33b0940ee10000000a11402f/frameset.htm
http://sapdocs.info/2008/09/02/sap-bwa-step-by-step-guide/
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
Hope it helps

Dear Communities, please kindly assist me. I use iphone 3GS with Software Version 4.1. Each time I connect my iphone to my Laptop through itune. itune automatically tells me that itunes connect to itune store. An unknown error occured(306)

Dear Community,
Please, kindly assist me with following challenges. I use iphone 3GS. I have used the phone for almost a year now. My iphone 3GS cannot connect to the itunes store. Each time I connect my phone to my Laptop through itunes. A message will automatically come up which states that "iTunes could not connect to the iTunes Store. An unknoown error occured (306)". It also make a footnote which states "make sure that your network connection ia active and try again". When I click the button labeled OK just below the messages, another message will come up which reads, "A new iphone software version (5.1) is available for the iphone software. Would you like to download it and update your iphone now?". It gives me the option buttons such as CANCEL or DOWNLOAD AND UPDATE or DOWNLOAD ONLY. If I click on DOWNLOAD AND UPDATE or DOWNLOAD ONLY. Another message will appear which states that "The iphone software update Server could not be conted" With a Footnote that states "Make sure your network settings are correct and your network connections is active, or try again later.
The above challenge has continued for more that 3 months now. This challenge has hindered me from installing some applications like Facebook Application for iphone, LinkedIn application for iphone and a lot of other applications. Each time I try to get these applications my iphone 3GS while inform that my current ios version 4.1 cannot work with the application, that they requires at least ios version 5.1 or above.
Please, I really need your kind assistance. I am ernestly waiting for responses.

Dear Tim,
I saw your message. Below are the problems:
Whenever I connect my iphone 3GS to my PC through a USB. My itunes software comes up automatically.
1. After that a message appears from the itunes that states that 'itunes could not connect to the itunes store, an unknown error cccured (306).
2. After the above, an alert message comes up which states that A new iphone software version 5.1 is availlable for my iphone. It then states would you like to download it and update your iphone now? With the options buttons as Cancel or Download and Update or Download Only. Whenever I clicked on Download and Update or Download Only, the next message that comes up is that The iphone Software Update Server Could not be Contacted and suggest make sure your network setting are correct and active or try again later.
The above is the challenges I am facing now.

How to get web application to use Tuscany without conflicting with SAP SDO

Hi,
We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO. As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
common-2.2.3.jar
ecore-2.2.3.jar
ecore-change-2.2.3.jar
ecore-xmi-2.2.3.jar
tuscany-sdo-impl-1.1.1.jar
tuscany-sdo-lib-1.1.1.jar
tuscany-sdo-tools-1.1.1.jar
xsd-2.2.3.jar
We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
However, when we try to run the web application, the following error is logged: java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

I took a look at the "printerReady" example. Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
Any ideas on how to find the MAC address associated with the IP addresses that respond?
We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
I'll try the InetPing to see how it works,
Kirk

Error while Connecting report Best Practices v1.31 with SAP

Hello experts,
I'm facing an issue while trying to connect some of my reports from Best Practices for BI with SAP.
It only happens when it's about info sets, the other ones that are with SAP tables go smoothly without a problem.
The most interesting is I have already one of the reports connected to SAP info sets.
I have already verified the document of steps of creation of additional database that comes with BP pack. They seem ok.
Here goes what Crystal Reports throws to me after changing the data source to SAP:
For report "GL Statement" one of the Financial Analysis one which uses InfoSet: /KYK/IS_FIGL_I3:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: It wasn't indicated any variant for exercise (something like this after translating) - click ok then
- Database connector error: RFC_INVALID_HANDLE
For report "Cost Analysis: Planned vs. Actual Order Costs" one of the Financial Analysis one which uses InfoSet: ZBPBI131_INFO_ODVR and ZBPBI131_INFO_COAS; and also the Query CO_OM_OP_20_Q1:
- Failed to retrieve data from the database; - click ok then...
- Database connector error: check class for selections raised errors - click ok then
- Database connector error: RFC_INVALID_HANDLE
Obs.: Those "Z" infosets are already created in SAP environment.
The one that works fine is one of the Purchasing Analysis reports:
- Purchasing Group Analysis -> InfoSet: /KYK/IS_MCE1
I'm kind of lost to solve this, because I'm not sure if it can be in the SAP JCO or some parameter that was done wrongly in SAP and I have already check possible solutions for both.
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

I re-checked step 3.2.3 - Uploading Crystal User Roles (transaction PFCG) - of the manual where it talks about CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER roles, I noticed in the Authorizations tab that the status was saying it hadn't been generated and I had a yellow sign, so then that was what I did (I generated) as it says in the manual.
Both statuses are now saying "Authorization profile is generated" and the sign is now green on the tab.
I had another issue in the User tab (it was yellow as Authorizations one before generating)....all I needed to do to change to green was comparing user (User Comparison button).
After all that, I tried once more to refresh the Crystal report and I still have the error messages being thrown.
There's one more issue in one of the tabs of PFCG transaction, it is on the Menu one where it is with a red sign, but there's nothing talking about it in the manual. I just have a folder called "Role menu" without anything in it.
Can it be the reason why I'm facing errors when connecting the report to SAP infoSets? (remember one of my reports which is connected to an infoSet works good)
Thanks in advance,
Carlos Henrique Matos da Silva - SAP BusinessObjects BI - Brazil.

SAP APO with SAP R/3 integration

Hi All,
From a technical perspective, what is it that a developer should know to work on SAP APO with SAP R/3 integration. Kindly elaborate on this if you can...
Thanks in advance.
Marvin
Edited by: Marvin Jones on Feb 3, 2008 5:09 AM

Standard APO and R/3 CIF integration does not need additional ABAP coding.
However if you are going to enhance any master or transaction data while transfer via CIF using BADI or User-exits then good amount of ABAP expertise is required.
Per my understanding USer-exits are classical ABAP while BADI are Object-oriented.
While I cannot comment if there will be "immense" amount of coding to be done but CIF user exits remain a critical component of any implementation. Its not the "amount" but "complexity" - need to understand the source system and target system behaiour and then accordingly modify, that matters.
Thumbrule - if its master data modification then its simple. If its transaction data modification then its can become quite complex.
Hope this helps.
somnath

Version Compatibility of SAP R/3 4.6 C with SAP CRM 5.2 + CRM middleware

Dear SDN team,
We are trying to Integrate SAP R/3 4.6c with SAP CRM 5.2 using CRM middleware.
We wanted to know the following :
1.Technical and Functional feasibility in integration of CRM 5.2 and R/3 4.6c. What are problems for these versions ? ( In Brief )
2.We are trying to move the Objects BP , Quotes and Products from R/3 to CRM 5.2. Has anyone done this and can someone give us a brief description of the problems while doing the same
3.Any other useful suggestions would be very helpful regarding CRM middleware.
Kindly reply on this post . Points would be awarded.
Thanks and Regards
Dinesh and Ritvij
Email : [email protected]

Hello Ritvij,
Regarding middleware ,are you down loading plants? bacause down load object objects DNL_PLANT is obsolete.
Unusable middleware objects :
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
and the master data objects
MATERIAL
SERVICE_MASTER..
Find composite note for middleware at 872533..
What is the leading system for Order creation?
Please refer notes 490932 for more info about transactional doc replication between the two systems.
Please assign points.
regards,
Muralidhar Prasad Chatna

Is it possible to Replace faxserver with SAP PI.

Hi,
Current scenario which is running:
ECC>Faxserver> Faxmachines
upgrade to PI by replacing fax machine:
ECC>PI>Faxmachine/Faxserver
We have to send the message by dialling to the fax machine..
Right now, the file/message is sent from ECC to faxserver which inturn dial to the receiver fax machine.
Now we got a proposal of replacing this fax server with SAP PI. Is there any way we can replace this fax server with PI by using some custom adapter?
Does anyone done this kind of scenario?
Is there any custom adapter module we can write to handle in PI instead of using Faxserver?
I think this is not possible to replace? Any suggestions please?
Thanks
Deepthi

Hi Abhishek,
Thank you. I will check about the webservice with the vendors.
Meanwhile we got few small vendors whom doesn't have any other option other than receiving orders through Fax machine. So I'm just wondering is there any way we can send messages directly to their fax machine from PI (may be using Mail adapter)..
I was going through below link and looks like there is a way by using mail adapter...?
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm
Exchanging faxes and text messages (pager/SMS) using SMTP is also possible. For this, faxes and messages are packed as e-mails. For the send process, the mail server analyzes the domain of the recipient addresses and either forwards the e-mails to an internal fax-/text message server (for example SMS=491759628717 at sms-server.company.com) or to an external provider (for example FAX=16105954900 at fax-provider.com).
What do you think?
Thanks

Integration SUS with SAP Invoice Management

Hi,
We are implementing the SUS portal (Supplier Self-Service) of SRM, together with SAP Invoice Management by OpenText. When you create an invoice in the SUS portal, it is send to the backend (ECC) as an IDoc of type INVOIC01.
We can read this IDoc into SAP Invoice Management (SIM), through the IDoc interface, for which we have mapped the data fields in the configuration of SIM. This works fine for most of the fields, but we have difficulties with two fields.
The SUS portal seems to put the ISO code of the unit of measurement (UOM) in the IDoc, but SIM expects the internal SAP UOM code. Similarly, the Service Entry Sheet number in the IDoc is only the external reference number, and not the internal SES number (which SIM needs).
Is there any way to configure these fields (either in SUS or SIM), without having to make a conversion function module? I ask this question, because my client is really hesitant when requesting to make a development....
Many thanks in advance for any suggestions that you make!
Kind regards, Paul

Hi Paul,
If there is no way to change it in SUS (which I don't know as I don't know SUS), then I don't think there is an option other than using a own development for the conversion. Either using a conversion function module or using a custom business rule which does the conversion.
Do you use the standard delivered function module /OPT/DP_INBOUND_IDOC_PROC as the processing FM? If not, maybe you could do the conversion in the processing FM (provided you already use a custom processor).
Regards,
Martin

Webinar: How to implement secure scenarios with SAP NW PI 7.1

SAP Intelligence Platform & NetWeaver RIG APJ Expert Call
Dear valued SAP Experts,
Next SAP Intelligence Platform & NetWeaver RIG Expert Call Session will take place on Tuesday, August 18.
The SAP Intelligence Platform & NetWeaver RIG Expert Call Sessions are designed to support consultants, partners and customers during their implementation projects. The sessions cover all different aspects of SAP NetWeaver and are aimed at
thus provide knowledge which is not available via standard training courses. The session duration is typically 60min and includes questions and answers.
Tuesday, August 18, 2009:
How to implement secure scenarios with SAP NetWeaver Process Integration 7.1
Time: 2.00 - 3.00 p.m. Singapore Time (UTC +8)
This event will feature Makoto Sugishita with the SAP Intelligence Platform & NetWeaver Regional Implementation Group.
Makoto provides the following abstract:
In this session you will learn more about the core security concepts that are provided with the service-oriented architecture (SOA)
management capabilities in SAP NetWeaver Process Integration (SAP NetWeaver PI). This session will cover main use cases and
supported scenarios of secure SAP NetWeaver PI deployments.
SAP Connect Link: https://sap.emea.pgiconnect.com/I016095
(no passcode needed)
Dial in:
For dial in details please register here http://www.surveymonkey.com/s.aspx?sm=EFeuZl9PxrwKOW5i5W556g_3d_3d
Kind regards,
Sarma Sishta
SAP Intelligence Platform & NetWeaver RIG APJ

hi,
I'm making this a sticky thread till August 18 so it will have better visibility
Regards,
Michal Krawczyk

Hi. I am Alec. Kindly assist with SAP demo screen

Similar Messages

Maybe you are looking for