Hi! I am connected to my Airport Extreme Graphite but no internet
Has any body suffered excellent wifi connectivity, Full cable broadband function but no internet.
If I plug straight into modem no worries
Network shows excellent wifi signal
LEDs on graphite doing their stuff
pc connectivity lights on motorolla modem show activity between graph' and itself
but no network access,
cant quite work out how to upgrade the firmware with a windows OS
Regards
A
Has any body suffered excellent wifi connectivity, Full cable broadband function but no internet.
If I plug straight into modem no worries
Network shows excellent wifi signal
LEDs on graphite doing their stuff
pc connectivity lights on motorolla modem show activity between graph' and itself
but no network access,
cant quite work out how to upgrade the firmware with a windows OS
Regards
A
Similar Messages
-
Airport Extreme, Network but No Internet
My Airport Extreme was working fine until our cable internet was interrupted overnight. Now I can get wired ethernet when connected directly to the cable modem, I can get a good ip, network and router address to the Airport, even a ping, but no internet to either my wired G5 or wireless MacBook. I've power cycled and fiddled with configurations. Ideas?
Most likely, your AirPort Extreme Base Station (AEBSn) is not getting an IP address from the cable modem.
Although you have tried power recycling, I suggest you give it another go as follows:
o Power-down the modem, AEBSn, and computer(s); wait at least 10-15 minutes.
o Power-up the modem; wait at least 10-15 minutes.
o Power-up the AEBSn; wait at least 5-10 minutes.
o Power-up the computer(s)
Your computer(s) should now be able to access the Internet through the AEBSn. Please post back your results. -
I have my iTunes library stored on an external hard drive which is connected to my airport extreme, I wish to share my iTunes library over my network, I can do this with my laptop, but not with my iPad, can anyone tell me if it is possible
You can't connect directly to the external drive, but should be able to use iTunes Home Sharing via the laptop.
http://support.apple.com/kb/PH1453 -
I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.
How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507
-
For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine. This has worked fine without any issues. What I would like to do now is to move my itunes and iphoto libraries off of my laptop (space constraints) and store them on a second external hard drive (HD2) connected to the airport extreme. I have successfully connected the second hard drive using a Belkin powered USB hub. What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2? I apologize if this has already been answered but i've read conflicting responses on various message boards and a number of responses were dated so I wanted to make sure I received the latest information.
thank youkosty wrote:
For the past year I've been using an external hard drive (HD1) connected to my airport extreme as the back-up location for time machine. This has worked fine without any issues.
That may be true, but you need to know that backing-up that way is unreliable and not supported by Apple. See: Using Time Machine with an Airport Extreme Air Disk. Do not be surprised if those backups suddenly turn up corrupted.
What I am wondering is if I direct my time machine back-ups to HD1 will it back-up both my mac HD as well as HD2?
No. Time Machine cannot back up from any network location. The 3rd-party utilities CarbonCopyCloner and ChronoSync may be workable alternatives. -
can i have two internet connections connected to two airport extremes separately without disturbing the home sharing option. i want to have both the airport extremes to use a single imac for streaming music or video to my apple tv's at different places where one apple tv is in the range of one airport extreme.it's not a problem if both airport extremes have different wifi id's with separate internet.The imac which i use for streaming the music and videos is only in the range of only one airport extreme.is it possible if i can stream music or videos to my apple tv which is not in the range of same airport extreme which i use for imac but in the range of other airport extreme.
Finally what i need is i want to use two internet networks as my highest possible internet bandwidth is about 1mbps.and i know that i cant mix both the networks and make it as 2mbps.Yes, that is possible. Please check out the following Apple Support article for details on how.
-
can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?
Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
btw - what are the symptoms of your failing drive?
-mj
Message was edited by: macjack -
External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.
Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help. -
Using Time MACHINE with a USB drive connected to an Airport Extreme
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Please click here:
|
Using Time Machine with an Airport Extreme AirDisk
|
Note: If you got here by clicking a link that looks like this:
_. . . discussions.apple.com/thread.jspa?threadID=2299608#Q1_
Note the number at the end, after the +*pound sign,+* (#) and click the corresponding item below:
Please pardon the inconvenience.
|
QUESTIONS
*Q1. Can I use the USB drive(s) for Time Machine backups AND other data?*
*Q2. How do I set up Time Machine to back up to a USB drive connected to my Airport Extreme?*
*Q3. How do I delete backups?*
*Q4. How do I back-up my backups?*
If you don't see your question here, try Time Machine - Frequently Asked Questions.
|
PROBLEMS
*P1. The Backup disk image could not be created.*
*P2. Time Machine could not complete the backup . . sparsebundle could not be accessed. (Error 109).*
If you don't see your problem here, try Time Machine - Troubleshooting
This is the 3rd version of this tip. It was submitted on May 16, 2010 by Pondini.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.Hi, Nubz!
Yes, I just saw that, and am still chuckling.
Maybe that will mollify the Jive gods?
Thanks again,
Jim -
I have a LaCie 2TB hard drive connected to a Airport Extreme Base Station. I also have a 1TB MyBook connected to a Mac Mini. My question is can you backup selected files (photos) from the LaCie drive to the MyBook drive using Time Machine, or any other software? If it will cost a fortune, I guess I can always just copy the newer files over.
Thank you for such a lightning-fast response Niel :-) Can I just double check with you the following ...?
The external drive where my iPhoto library is located has three partitions - Time Machine Backup, Pictures (where the iPhoto library is located) and SuperDuper Bootable Clone.
When you say 'Remove the external drive from the list of items set to be excluded from the backup, and then add everything else on it' - am I correct in thinking that I should remove Pictures partition from the items to be excluded but leave the Time Machine Backup and SuperDuper Bootable Clone as excluded items?
On my 2TB external drive (the one I'm backing up to) there are 5 partitions - Time Machine Backup, SuperDuper Clone, Pictures, Photo Archive and Document Archive. The Time Machine Backup is 700GB of which I still have 473GB available - when I include the Pictures folder that contains the iPhoto library that will use up another 148GB but I think there's still plenty of room to use it.
When you say if the partition contain the iPhoto library isn't dedicated to it it may be easier to create one which is, the only item I have on the Pictures volume is the iPhoto library so I think that it's dedicated to it. I was going to add images from the Pictures folder on my MacBook Pro but haven't done so at this stage so I won't do so. It wouldn't matter though, would it, if I copied the images from the Pictures folder on my MBP to the 'Photo Archive' partition of the EHD?
Thank you once more for your reply.
Tricia -
Saving files to a hard drive connected to my Airport Extreme
I just upgraded to Leopard. I am unable to use Backup v 3.1.2 to save files to a hard drive i have connected to my Airport Extreme. Previously, using Tiger i was able to perform this task.
I use Finder and see my airport express network and my external hard drive. However, when i run my backup jobs using Backup the program can not located the external hard drives.The discussion was helpful. My hard drive connected to my Airport Extreme is now recognized and i can backup files to a folder called 'Backups'. However, i am only capable of saving to this one folder. When i try to create subfolders and select one of them as my location in the Backup program i get an error message; "the selected location is not a valid destination". Any idea how to get around this problem?
Many thanks for the quick response to my previous mail. -
I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device. If so would I have to format it with two partitions , one for time machine and the other for network storage. Aprreciate any advice
If you have the hard drive connected to the AirPort Extreme....it is a network storage device.
One issue that you may want to think about is that Apple does not support Time Machine backups to a hard drive at the USB port at the AirPort Extreme.
In spite of this, some users who try this are able to make it work. Others have some limited success and some have no success.
It's not supported....so there will be no help from Apple in the event of problems.
If you decide to proceed with this, make sure that the partition for Time Machine backups is formatted in Mac OS Extended (Journaled) as other formats will not work with Time Machine.
Having a secondary backup plan would also be something that you might want to consider. -
HT201250 Time machine back up using a external hard drive connected to the Airport extreme
How can I setup a time machine back up using a external hard drive connected to the Airport extreme? Even better for time managment purposes I want to use the Eithernet Thunderbolt connection for the first back up and then through the wifi there after for daily routine Time Machine back ups.
You can attach a hard drive, but Time Machine backups to a drive at the USB port at the AirPort Extreme are not supported by Apple, so it's not possible to say what your actual results might be.
If you decide to try this, it would be wise to have a secondary backup plan in place as well.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html -
I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?
Not without a player..
The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video. -
Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory
These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.
Maybe you are looking for
-
Hi experts: I have a problem with my query, I have 2 series of billing If I want to get a report of a single series that I only get the full amount without detail. I am not throwing well this amount. In fact is bigger It's just that simple add up the
-
How do i unlock my ipad mini?
-
Access to a folder in km content in the portal
can i access with web dynpro to get xml documents in a folder located in the km in the portal? do you have code, tutorials or info about that (if is possible) Thanks a lot
-
DB Adapter configuration with Informix DB
Hello everyone, I have setup a Informix datasource on Weblogic 10.3.6 by selecting weblogic's informix XA driver. I've a BPEL which invokes DB adapter with a pure SQL query (a little complicated query). But its throwing following exception while test
-
ORA-01555: snapshot too old / set transaction
Hello, When I execute a query in a script I have the following error: ORA-01555: snapshot too old... At the beginning of the script I have SET TRANSACTION use rollback segment XX. On the other hand I used SET TRANSACTION READ ONLY and I had no errors