Hi I am having a problem with viber on my iPod touch can u help?

i Am having a problem with viber on my iPod touch could you help

Hi there ciarafrombalbriggan,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
-Griff W.

Similar Messages

  • Hello i have a problem with a game on game center can you help me?

    hello i have a problem with a game on game center can you help me?

    Perhaps, but you will need to provide a little more detail.

  • Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

    Is something wrong with the new software update. My battery dies within 4 hours. There are also problems with my e-mail accounts. Can someone help me?

    Have you attempted an iTunes restore and setting up as a new device? Sometimes battery life issues can be caused by corrupted iOS software.
    - Greg

  • Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help...

    Hello, I have a big batterylife problem with my brand new iPod touch 4Gen 8GB white. Please help?

    What battery life are you getting?  Is it short when you are using the iPod? When it is sleeping?

  • With imessage on the ipod touch can I use my own cellphone number?

    with imessage on the ipod touch can i use my own cellphone number

    No. You have to use an email address. You can use your Apple ID email address and you can also add other email addresses. To add go to Settings>Messages and add the email address to the the Receive At location.

  • Still having Problems with yamaha USB UX16 midi device can anyone help??

    I have setup drivers on my computer which have installed successfully. In logic I have setup environment so Physical input sequenser and keyboard are all connected up in Click and Ports layer.
    When I am trying to play keyboard I still have no input or outport signal in transport window I am stuck on what to do??
    please can someone help???

    I take back all I said. After reading reviews of this product, take it back to wherever you bought it and buy something else, anything else, everyone hates this thing, and is having problems with it. get a midisport instead.
    http://www.midiman.com/index.php?do=products.list&ID=usbmidiinterfaces
    here are a couple of reviews:
    Dec 12, 2006 - It is hit or miss as far as compatability goes and you don't know until it is too late if the full instruction set is going to be sent/recieved intact. Tried it on various Macs, PCs and inconsistent in every situation. Yamaha needs to issue a full recall on this POC called the UX-16.
    Nov 6, 2004 - The first Yamaha UX 16 that I bought worked okay for a day, then started to cause a buzzing noise. The next day, it was not recognized at all by my laptop. I returned it to the retailer, hoping to find a competitive portable USB/MIDI interface at another store. After failing to find an alternative at the other store, I bought the Yamaha UX16 again, hoping that the first dud was a fluke.
    The second UX16 also worked for one day before giving out.
    Avoid the UX16.
    Apr 12, 2004 - This thing only works for a short period of time then quits being detectable to windows for random periods of time. Totally unreliable.

  • Dont uptade messages in Gmail app also in Viber. And have problems with Weather and App store. Can you help me?

    iOS is latest

    I have been having this exact same problem on/off. Not ALL PC users though, just some. I DO select the Always Send Windows-friendly Attachement, but apparently it does not always work. I have to tell my PC friends that if they don't see the file attached, to right click on the embedded image and copy.
    It would be great if this was cleared up.
    Pamela
    Suddenly, people are having problems saving JPEGS
    that I have attcahed to my email. On the PC end, it
    looks as if the image is being imbedded in the email
    rather than being sent as an attachment.
    I am using the Mail app for the mac. When attaching
    files, I simply drag and drop the JPEG file onto the
    Mail app icon in my Doc. It opens an new email with
    the file "attached", I compose my message annd send
    it.
    I have never had problems with this before - it just
    seems to have started all the sudden.
    Does anybody know why this might be happening and/or
    a good way to get around it?
    - IAN
    PowerBook G4 & soon a G5   Mac OS X (10.4.5)  

  • Having a problem with mini dvi to hdmi.  Can see the background, but must move all screens all the way to the right to see on tv.  Any solutions?

    I'm having an issue with setting up mini dvi to hdmi.  I can connect and see the background picture from my macbook (approx 4 years old) but in order to see any screens or video, I have to move the screen almost all the way off the macbook display to the right.  Any ideas why this would happen?  Also, there is no audio, although when I bought the adapter and cable at the Mac store, they assured me it would handle both.

    You have the display set in Extended Desktop mode. In System Preferences>Displays on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will makethe second monitor your main screen. You can now use your MacBook in ClamshellMode with a wired or Bluetooth keyboard and mouse.  http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
    Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box.
    No Mini-DVI adapter can carry audio. The only MacBook that sends audio is the Mid 2010 model 7,1 through a Mini DisplayPort.
    If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs for audio with the HDMI plug. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.

  • Having problems with my new iPod touch can you help me a first time user?

    I cannot locate my photos in the iTunes library, I have no problem with the Music entry, is there something I have to do to create a library entry?
    Also I do not get the photo folders only the individual photos in one large file (3500+) good quality but not good for specific look up, again is there anything I need to do to have folder organization?
    I'd appreciate any help that I can get, and would thank any particant in advance

    Hi Kappy. I have located the photo files from the sync to my ipod, by the way I am a Windows XP user, and what is showing is a file called 'ipod Photo Cache' which contains folders which have the photo conversions of what is in my 'My Pictures' folder, this cache folder follows at the end of my photo library content.
    The cache folder files have an extension of .thumb these are conversions for the ipod and appear to change when I delete or modify any photo in my library and to further complicate things these photos (.JPG format) have an intermediate conversion to a (.cpt format)which are contained within my photo library folders. None of this bothers me since I have my photos on the ipod which is of great value to me.
    Thanks for your efforts on my behalf, I will now let this rest and proceed to other new challenges in the ipod world.
    Message was edited by: Bill of Fife

  • Why am I having intermittant problems with my Galaxy Note 4 touch screen?

    I've had my new Samsung Galaxy Note 4 for two days now and have noticed intermittant problems with the touch screen.  I've even added more touch screen sensitivity in the settings area and it has NOT helped at all.  Sometimes I can tap on the screen repeatedly and find the phone not respond, then all of a sudden it responds.  As I keep using the touch screen...suddenly it stops responding again.  It's extremely frustrating especially when it's a brand new phone.  I have now found several other reports of this on the internet, but have not found a fix.  Suggestions (besides reset to factory settings and install each app one by one and test the phone)?  Since it's an intermittant problem, it's hard to tell if any particular app is the sole contributing factor to this.  Based on my experience and that of others...this appears to be a fairly common "bug" that we consumers are experiencing.  Help!?

    If you are experiencing problems with your Samsung Galaxy Note 4 touch screen, please continue by adding your comments here and hit the like button so we can elevate this issue to Verizon and Samsung!

  • Having a problem with the WiFI and the touch

    Hi guys
    First of all, I´d like to say that Im kinda an Apple rookie - this is my first ever Apple product ever, so I my knowledge is somewhere really low...
    well, here goes... Happily i bought my new iPod in january stoked about all the cool features such as wifi, videos and so on. So there I was in a really good mood when I first got it up and running and found my 1st hotspot. (I had also bought the january software upgrade for mail and stuff) So then I tried loading a page in Safari and it gives me the message "Server cannot be found" - or something like that, you know - oh well I think, and try to open one of the other programs, but neither of those works... And yeah, Ive tried several networks but same results no matter where.
    So, folks, do you have any idea of what could help me? Any help is appreciated!
    by the way, in these months im housed in Ecuador - if that changes anything.
    Thanks

    Sometimes shutting the ipod down and restarting within the Wi-Fi hotspot works. (holding the on/off button for 5 seconds...)
    Other times, i have found I had to go into the network settings on the ipod and toggle the DHCP settings a few times, or telling it to "Forget This Network" which will allow it to try to re-address itself on the network.
    There are also some Wi-Fi hotspots that have wireless routers that are not so Mac-friendly... these will sometimes not provide an automatic IP address and must be manually changed to a static IP. If you can look at somebody else's laptop IP settings, usually you can manually configure the iPod touch to work with a fixed IP address that is a similar range to the laptops....
    hope this helps.

  • Two awkward problems with my 2ND Gen iPod Touch 8GB

    1) I can not update my apps. It tells me I do not have write access to the itunes media folder, I do, and I constantly add music to it from sources other than itunes. I checked finder and all the folder is read and write/ as well as the several subfolders within.
    2) The next problem is quite a pickle. After restoring from a time machine backup, my iPod touch, no longer is recognized on my mac. Recovery fails with itunes. Get this: it works on every other computer i tried, and im using the same cable. Keep in mind my USB ports are all 100% good, i am constanly using external HDD'S with them. So my question is here, how can I get the iPod to mount without bending over backwards, reinstalling the OS and all. Also since it is still under warrenty, and I have tried getting it restored at apple store (it worked, but to no avail on my acutal iMac at home) will apple replace my ipod with a totally different one?

    1) You looked in the write place and your access seems correct. However, try repairing permissions as this will usually fix these things.
    2) This one isn't as bad as you think it is. Apple Mobile Device Services is not loading properly. If you want to try a quick fix, restart your computer and try again. If that doesn't fix it, go through the troubleshooting steps in this article: http://support.apple.com/kb/HT1747 Probably the path that will work best for you is to follow the steps for uninstalling and reinstalling iTunes.

  • PROBLEM with iMessage (Messages) on iPod touch HELPPP

    We had a problem with iMessage. We're both using iPod touch with iOS5 version.
    but we can't send messages. It says our emails/apple ids are not registered on iMessage.
    I checked it on already on the Settings>iMessage> ON .
    but still we cant use it. HELP PLEASE THANKS

    Same isue when tryn to change advanced setting :
    +Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: profiled|Service starting...+
    +Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: MC|Profile MCConfigurationProfile 0x113b30 has no friendly name.+
    +Mon Jul 5 15:51:41 iPhone ReportCrash[267] <Notice>: Formulating crash report for process profiled[266]+
    +Mon Jul 5 15:51:42 iPhone com.apple.launchd[1] (com.apple.managedconfiguration.profiled[266]) <Warning>: (com.apple.managedconfiguration.profiled) Job appears to have crashed: Bus error+
    +Mon Jul 5 15:51:42 iPhone ReportCrash[267] <Error>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/profiled2010-07-05-155139iPhone.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0+
    Did you solved this issue ?
    Message was edited by: lbarbisan

  • Problems with iPhone 3G and iPod Touch with Car Stereos

    There are three cars in our family, and every car as a stereo with built-in iPod interfaces. Car 1 has a Pioneer system, Car 2 has a Kenwood, and my car has an Alpine system. I can't hear any audio when I connect an iPod touch or iPhone 3G to the Kenwood and Pioneer systems. They can perform functions on the iPhone/iPod touch, such as change songs, randomize songs, repeat songs, etc, however, there is no audio. 80% of the time the Alpine does the same thing; 10% of the time an error is displayed on the head unit; and 10% the iPod Touch/iPhone works perfectly.
    All three systems can operate my iPod Nano correctly without any problems at all. Because the same problem occurs to all the stereos and because the iPod Touch and iPhone are basically the same minus phone capabilities, I am beginning to believe that the problem is with them and not the stereo systems. Has anyone else had this problem? If so, how can I fix it if it is fixable?

    Which Touch (first or second generation) and which iPhone (2G or 3G)?
    And what generation Nano are you testing with.
    Your auto systems may not be compatible with the newer generation model iPods/Phones.

  • Slew of Problems with iTunes--Bonjour Service, Ipod Touch Recognition, iTunes Store Connectivity

    As per the title, the problems are getting quite serious and annoying.
    I have an issue with the Bonjour service not being recognized (mDNSresponder.exe doesn't appear to be running) and consequently sharing not working, an inability to connect to the iTunes store (as shown in the above diagnostic report), and an inability for iTunes or my laptop to recognize the iPod Touch. On any other PC here, it's perfectly fine.
    The following is a diagnostic report with conflicting information:
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    ASUSTeK Computer Inc. N61Jq
    iTunes 10.6.0.40
    QuickTime not available
    FairPlay 1.14.34
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 2.0.2.0
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 003CAB9C0F41E018
    Current user is not an administrator.
    The current local date and time is 2012-03-17 10:49:31.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Advanced Micro Devices, Inc., AMD Radeon HD 6570M/5700 Series
    **** External Plug-ins Information ****
    Plug-in Name:         mmkeys.dll
    Plug-in Loaded:      Yes
    Plug-in Version:      Unknown
    Plug-in File Version:              Unknown
    Plug-in Path:           C:\Users\Milan\AppData\Roaming\Apple Computer\iTunes\iTunes Plug-ins\mmkeys.dll
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {5D75EB69-A527-4AED-B6A8-3139B2AB4F1E}
    Description:            Microsoft Virtual WiFi Miniport Adapter
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 19:00:00 1969
    Lease Expires:       Wed Dec 31 19:00:00 1969
    DNS Servers:        
    Adapter Name:        {CD25755F-0D10-4EA0-9C72-A488B6BA4434}
    Description:            Intel(R) Centrino(R) Advanced-N 6200 AGN
    IP Address:             192.168.1.136
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Sat Mar 17 09:41:08 2012
    Lease Expires:       Sun Mar 18 09:41:08 2012
    DNS Servers:         192.168.1.1
    Adapter Name:        {1867589A-E290-4BB5-BCCD-A89F57BA7C93}
    Description:            Bluetooth Personal Area Network
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 19:00:00 1969
    Lease Expires:       Wed Dec 31 19:00:00 1969
    DNS Servers:        
    Adapter Name:        {DAFC4586-8644-495B-A4F9-41C555FB9994}
    Description:            Atheros AR8131 PCI-E Gigabit Ethernet Controller (NDIS 6.20)
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 19:00:00 1969
    Lease Expires:       Wed Dec 31 19:00:00 1969
    DNS Servers:        
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    Last successful iTunes Store access was 2012-02-27 20:13:16.
    **** Device Connectivity Tests ****
    iPodService 10.6.0.40 (x64) is currently running.
    iTunesHelper 10.6.0.40 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Renesas Electronics USB 3.0 Host Controller.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34.  Device is working properly.
    Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod nano (4th Generation) running firmware version 1.0.4
    Serial Number:       6U846T8B3R0
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.
    As you can see, there are many problems here. Quicktime is apprently unavailable, when it's installed. iTunes doesn't recognize me as an administrator, when the account is indeed an admin (and can perform administrative actions).
    Connection to the iTunes store is unsuccessful, when iTunes is enabled in the windows firewall. All the services iTunes needs to run, are running successfully. The sole exception being Bonjour, which iTunes doesn't seem to realize is running. I've verified the service to be running, and have restarted it. Additionally, mDNSresponder.exe is not running under task manager. Manually starting it from Bonjour's file directory doesn't work, either. I've changed my "hosts" file, and still no luck. I've also changed a couple of Internet Explorer internet properties, and the unsuccessful connectivity doesn't change. I've reinstalled the whole line of Apple software, without a change in results. Reboots are just as unsuccessful.
    Ultimately, my problem is neither iTunes nor Windows recognizes my iPod Touch, whereas my old Nano used to work fine. On other computers, iTunes is fine. The problem is on this one, and whether it's an Apple or Windows problem, I don't know. Hopefully someone here can help me out, as I would be immensely appreciative.

    One step forward?
    I'd like to doublecheck something you mentioned earlier:
    I've verified the service to be running, and have restarted it. Additionally, mDNSresponder.exe is not running under task manager.
    When you were in the processes tab, did you have "Show processes from all users" checked, as per the following screenshot? (mDNSresponder.exe runs under SYSTEM, so you don't see it in there unless that box is checked.)

Maybe you are looking for

  • Release stratedgy of service entry sheet

    Hi, I have created release stradegy of service entry sheet. I have created Group Y1 and Release Strategy 1 (General) the Release Codes FR in the first line and AB in the second line. On the Prerequisites dialog box I have marked the small box AB in t

  • Problem with IOS6 maps

    I used maps on IOS5 and found it extremley useful in fact the phone functions and maps are my mosed used apps. The IOS6 version is worse than useless, reducing the function of my phone markedly. I really need to uninstall IOS6 or at least the maps. C

  • How to binding an array in javaFx

    Hello fellows, im trying to bind an array in javaFx but is not possible... i have a problem that, in my point of view, only can be solved with a bind array. a create some components in the scene dinamicaly and in other component (a button) a have to

  • Re: Fatal NI connect error 12170.

    I had a similiar issue today in my 11.2 RAC database alert.log. My errors were 12170 and 12535, and it is not a firewall issue. I found in my listener logs that IP referenced in the 12170 error message had connected to my  listener earlier today. It

  • Document Numbering Per Region

    Hi Guys I would like to configure the document numbering to be linked to a region, i have a series called INVA and INVB for example, location A and location B, i would also like the two series to start at the same point ie from number 1000, how would