Hi, I am trying to blur the background in Prem Pro CC I have made a mask using the free draw bezier tool but it does not track forward.  What am I doing wrong?

Hi, I am trying to blur the background in Prem Pro CC I have made a mask using the free draw bezier tool but it does not track forward.  What am I doing wrong?

Hi Kevin
I found a YouTube clip explaining how to blur the background with free draw bezier tool and it also said to invert the mask, but it still does not track forward. I really hope there is a solution.
Steph

Similar Messages

  • HT4796 I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

    I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

    Send it as a PDF.

  • Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

    Trying to download additional content for Logic Pro X. My download status is 26.6 GB of 26.6 GB, but Logic will not move any further, not matter what I do. Any suggestions?

    Thanks rhoydotp,
    The download was actually the successful part!  I had no issues with it timing out or anything.  My problem was the actual install, after the download was complete.  The installer just stopped about a quarter of the way up on "Alternative Kits" and never made it to any of the other kits.  I think I'll try installing them one at a time like you said, and see what happens.  Hopefully it works!
    -marth3

  • Keyer edge tool does not work. What am I doing wrong?

    When I am trying to soften the edge on my green screened image I try to use what they call the edge tool.
    But it does nothing to the edge of the image, it makes the entire keyed image more transparent or more opaque...  this is totally useless... I thought I remembered this working in a previous version but maybe not...
    what am I doing wrong? Or is it just not working correctly.
    Thanks for any help.
    FCPX 10.0.5  OSX 10.6.8

    Do you see the Multifox item to open a new window in the File of Firefox menu?
    You will see a "New Identity Profile" (Ctrl+Alt+M) in the "Firefox > New Tab" menu and in the File menu (press F 10 if the menu bar is hidden) and in the context menu if you right-click a link.<br />
    Choosing that menu entry will open a new window with a new set of cookies marked multifox-profile-2 in the cookie manager.
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
    If this hasn't helped then also try to delete the addons.sqlite file.

  • WRT54G does not work or what am I doing wrong?

    My setup: DSL -> 2wire modem router (bridge mode, firewall shutdown) ->WRT54G -> LAN with 1 IPPBX, 1 wired PC and 3 wireless PC.
    VoIP is running fine within our LAN, we have 2 SIP trunks running fine, But we just cant make an external softphone to work properly from WAN (outside the LAN).
    As long as I know, the simplest way to explain what a firewall does is 'everything requested from the inside should be wellcomed, anything unsolicited from the outside should be disallowed UNLESS explicitly told otherwise' this is, why the heck do we have unreachable ports althought we have allow those to receive extern traffic?
    Please check the pdf´s (snapshots) here:
    http://travelexpress.com.mx/download/router/status.pdf
    http://travelexpress.com.mx/download/router/router_firewall.pdf
    http://travelexpress.com.mx/download/router/router_forward.pdf
    http://travelexpress.com.mx/download/router/scanner.pdf
    http://travelexpress.com.mx/download/router/scanner1.pdf
    All those are for showing current setup, firewall, port forwarding and the results of a port scanner wich shows that efectively, we cannot use our extern SIP client because the WRT54G is blocking it...
    Thanks in advance as we are urged to fix this ASAP

    Yes. NAT is a function in the router. Just like the firewall. But still, both are different functions of the router. The firewall filters traffic to the router. NAT is responsible for mapping IP addresses. The reason why unsolicited packets from the internet won't get into the LAN is because NAT cannot deliver those packets and not the firewall rejecting some incoming connection. NAT does not filter. NAT tries to deliver and if it does not know where it drops it. But not because it wants to filter something.
    The settings on the router are correct. But as I have mentioned before, forwarding a port does not mean it's open or accessible. There are still other factors which could cause the port to be closed...
    Regarding the modem: you can check that if you connect a computer directly to the modem, open a port on the computer and then do the internet port scan again.
    I also explained how to check with telnet if TCP port 5060 on the IPPBX is really open or not. Why don't you just do this test? It would be much easier and faster, giving relevant answers. I don't mind whether asterisk usually uses both protocols on 5060 or not. Maybe it does. Maybe not. Maybe it can be configured. Whatever. Enter "telnet 192.168.1.69 5060" into a command prompt window of a computer connected to your LAN and you see if the port is open or not. Then we know something for sure instead of thinking about what should be or should not be...
    Also do the same telnet test with port 23 and 80 and then use the internet port scanner to scan for tcp port 23 and tcp port 80. Then we could see if anything goes through or not instead of discussing theory...
    I did not say you have to set up a lab setup. I only explained that you were mixing NAT functions and firewall functions of the router. The NAT function may look like some firewall in certain respects but it is still a different function with a completely different purpose.
    I also can't say if the IP settings are all correct. Maybe the IP address is correct but the gateway address is not. Or the DNS server.
    The subject of this thread is "... or what am I doing wrong?". It's impossible to comment on something if you don't give the details which would allow to verify that you have set it up indeed correct...

  • HT2518 Good Day, I've used pcs forever and just got a macbook pro.  I have installed Parallels, should use the Migration program also for the Apple side?

    I have a new Macbook Pro and have used pc's forever.  I have loaded and transferred info with Parelles, should I still use the migration program on the Mac?
    Thanks and have a good day

    Take a look at this link, particularly "What gets transferred, and to where?" when Windows Migration Assistant is used.
    http://support.apple.com/kb/ht4796
    If you have already transfered the files you want to transfer, WMA is of no use.
    I gather there is no other Mac, so the Mac Migration Assistant can do nothing.

  • HT1689 I changed my Apple Account ID on an authorized PC and have made several downloads using the new ID. However when I tried to access my account using my iPad, the pop-up still carry's the old ID. Ow do I synchronize the changes on my account with hte

    Please help with information on how to change the account ID on the pop-up log on request page on my iPad? I changed my account ID in the iTunes Store using my authorized PC. Renewing subscriptions directly from my device may prove impossible if I cannot acces my apple account on my device except through my PC. What do I do to harmonize the new name on my PC and on the iPad?

    If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > Store and then log back in and see if that 'refreshes' the account on the iPad.

  • I am trying to copy songs to an sd card for a digital photo frame. I changed my setting in iTunes to mp3 format before I downloaded the song but it didn't work. What am I doing wrong? Any suggestions? I would be very grateful!

    I am trying to copy songs to an sd card for a digital photo frame. I changed my settings in iTunes to mp3 format before I downloaded them but it did not work. What am I doing wrong? When I play the sd card in my mac or on a lenovo laptop it works but not in the photo frame. I would be grateful for any ideas as to what I am doing wrong.

    Unfortunately you've discovered too late how important it is to maintain an up-to-date backup of your iTunes library (and all other data of value).  You could, before wiping the drive, have considered making use of a commercial data recovery service that could (albeit at considerable cost) have extracted your library from the hard disk, even if virus infected.
    In the absence of that option, you will need to restore the content of your library from its original sources:
    Depending on your location, you may be able to re-download any iTunes Store purchases that are still available on the Store
    Likewise, most digital purchases from Amazon (including auto-rip copies of purchased CDs) should be available from the Amazon Cloud and via the Amazon Music application - the same may be true of other commercial sources for digital downloads
    Content imported from your CDs will have to imported again
    The specific situation that you describe regarding the music imported from your friend's external HDD suggests that either the source is badly organized and/or originates from a source other than iTunes (other media players may use alternative tags for information like artist, title, album, etc. that are not wholly consistent with how iTunes handle these).  Without details of the issues you're seeing it is difficult to suggest a remedy other than going through the media album-by-album, track-by-track, and correcting the inconsistencies.
    In the absence of a backup or access to the original library data there is no option other than painstakingly recreating your library as described above.  As you do so, you'll now realize how important creating and maintaining backups are - in my case I have at all times three separate duplicates of my library, in two different locations, where none is ever more than a week old compared to the content of my master library.

  • Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It ca

    Hello! I have installed Photoshop on PC WIN 7 64bit. When I store first time a Photoshop docuument, it works fine - after re-opening and doing changes I trying again to store it - it does not work anymore! First it does not accept the name (message "It can not be stored because the nam is invalid" With 2. trial it tells me that the data is blocked and I don't have the rights - and I should chenge them. But I am working as the Admin on my PC - and each trial to change the rights of the data is as well not possible because of missing rights - even I am Admin! I must always store the data with a new name, then it works, but I also cannot remove the old datas or shift them into the waste paper - because of no rights! -- sorry for not perfect english, I am German native speaker! Tahnks a lot for help!

    Hi,
    I am using a Nvidia 4200M adapter in my Laptop, Driver 266.96, Direct X 11
    In my desktop I am using an ATI XFX 6950, latest revision drivers (I am not at home right now so I cant get that info).
    The issue I did describe above, but it was a long explanation.
    In some flash games the game files load initially and get as far as the "click to start" button. Then the flash area usually goes either all white or all black (usually depending on the falsh game default background color) and then it stays that color. Cant see anything after hitting start (usually most games have an intro video or animation before the game starts, but I cant see any of it.
    For the very few games that do start, the flash game or application does not seem to work correctly in that when the rare game starts, it wont save any game files or save files to the pc and so if I exit the game (navigate away to another page or close browser) and then later come back, even though I click the option to save games (and ensure that the flash application slider shows it can save files and lots of space) it does not save and I have to start from the beginning all the time.
    More explanation I gave above.

  • Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

    Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

    I've been struggling with a similar issue myself and just figured it out.  Some of my content had been purchased with an older Apple ID that I don't use any more.  When I authorized my second computer, I only authorized it for my new Apple ID, not my old one.  When I tried to copy my library to the new computer, many songs, apps, etc. reported the error "could not be copied because this computer is not authorized".  It drove me crazy because I knew the computer was authorized and much of my library came over just fine.
    Finally I selected some of the problem items, selected "Get Info" from the menus, and saw that they were all purchased by my old Apple ID.  I then authorized my old Apple ID on my new computer, and all of my files are copying correctly now.
    Would be great if the message said something like "...because this computer is not authorized for Apple ID [email protected]"

  • I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.

    I'm trying to hook up my Macbook Pro to my TV. I'm using the 'mini-display port to female HDMI" adapter. all i can see is my desktop background. no folders or icons and when i play a movie it goes blank.

    Drag applications from your main desktop off the right side of the screen and they will appear on the TV.  This is the extended desktop mode. 
    Regards,
    Captfred

  • I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

    After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
    Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
    iTunes: Restoring iOS software - Support - Apple

  • HT3702 I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base co

    I purchased a book called Activity-based costing for $3.99. I tried to open the file but it said my computer does not have IOS. I have a smartphone and I am unable to view the book. I am requesting since I am unable to use the book activity-base costing, a refund.
    Kevin

    I don't know what you are saying. How do I get my money refunded.

  • After doing some editing in Lightroom I want to continue the edit in CS 5 but Lightroom is not exporting the edited version, this has not happened before, what am I doing wrong please? anybody

    After doing some editing in Lightroom I want to continue the edit in CS 5 but Lightroom is not exporting the edited version, this has not happened before, what am I doing wrong please? anybody

    You should be getting an error message that PS CS5 requires a higher version of ACR with two options "render using Lightroom" or "open anyway". You should choose the first option. If you are not seeing the error message then go to your Lightroom prefrences >General Tab> under Prompts> select "Reset all warning dialogs", then try the edit in function again. 

  • I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.  What should I do

    I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
    What should I do?

    Hi Anto2211,
    Please follow the thread: Black screen CC where this issue is already discussed and resolved.
    Let me know for any further query.
    Thanks,
    Ratandeep Arora

Maybe you are looking for