Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout).
Hi, I am using HP11 and iPlanet web server. When trying to upload files over HTTP using FORM ENCTYPE="multipart/form-data" that are bigger than a few Kilobytes i get a 408 error. (client timeout). It is as if the server has decided that the client has timed out during the file upload. The default setting is 30 seconds for AcceptTimeout in the magnus.conf file. This should be ample to get the file across, even increasing this to 2 minutes just produces the same error after 2 minutes. Any help appreciated. Apologies if this is not the correct forum for this, I couldn't see one for iPlanet and Web, many thanks, Kieran.
Hi,
You didnt mention which version of IWS. follow these steps.
(1)Goto Web Server Administration Server, select the server you want to manage.
(2)Select Preference >> Perfomance Tuning.
(3)set HTTP Persistent Connection Timeout to your choice (eg 180 sec for three minutes)
(4) Apply changes and restart the server.
*Setting the timeout to a lower value, however, may prevent the transfer of large files as timeout does not refer to the time that the connection has been idle. For example, if you are using a 2400 baud modem, and the request timeout is set to 180 seconds, then the maximum file size that can be transferred before the connection is closed is 432000 bits (2400 multiplied by 180)
Regards
T.Raghulan
[email protected]
Similar Messages
-
Wiki CSS files over HTTPS use only RC4
I finally found the answer to my problem of why the wiki CSS files wouldn't load.
It turns out that the wiki forces an HTTPS connection and it retrieves the CSS files from https://d11xdyzr0div58.cloudfront.net. The encryption used for those CSS files uses 128-bit RC4 with MD5. In Firefox, the about:config parameter name is
security.ssl3.rsa_rc4_128_md5
I had turned off all RC4-based encryption for SSL3 in about:config because RC4 is old and not appropriate for secure use in the modern day. Since SSL works by the server offering to the client all of the encryption algorithms it's willing to use, and then the client selects the ones it likes, my assumption was that if the encryption parameters for a connection include RC4 Firefox would just not ever pick one of the RC4 options. However, I had no idea that there would be a website that ONLY offered RC4. My guess is that this is the case for the wiki's CSS file server, because only by turning on the about:config parameter mentioned above can I get the CSS files to load.
Is there a way to address this issue? Preferably, either the CSS file server needs to support alternative algorithms (it looks like a cloud host, is that under our control at all?), or the wiki needs a way to be viewed in non-HTTPS mode. I don't care about the security of the wiki CSS files, I care about having RC4 turned on in Firefox -- I shouldn't have to enable it.
I considered filing a feature request, but I wanted feedback first.A couple of years ago, I wrote an extension for Firefox called CipherFox (see my sig below). One of its features is disabling RC4 in about:config. I've had RC4 disabled all this time, and the Arch Wiki is the first time I've ran into trouble with it being disabled.
I too don't care much about the CSS files being encrypted. Here's what I did a couple of months ago as a crappy, hacked-up workaround:
(1) A Greasemonkey script to change link and script href's to point to http instead of https:
// ==UserScript==
// @name Archwiki Cloudfront SSL
// @description Removes SSL from Cloudfront href's
// @version 1.0.0
// @author MkFly
// @include http://wiki.archlinux.org/*
// @include https://wiki.archlinux.org/*
// ==/UserScript==
var head = document.getElementsByTagName('head')[0];
var link = head.getElementsByTagName('link');
var script = head.getElementsByTagName('script');
var cloudfront = "d11xdyzr0div58.cloudfront.net";
for (var i in link) {
link[i].href = link[i].href.replace("https://" + cloudfront, "http://" + cloudfront);
for (var i in script) {
script[i].src = script[i].src.replace("https://" + cloudfront, "http://" + cloudfront);
(2) With that installed, loading the Wiki pages was still delayed while it tried to connect via SSL and waited to time out. I worked around that by blocking them with Adblock Plus:
|https://d11xdyzr0div58.cloudfront.net/*
I know this is a hacky way to do it, but it works for now. Hopefully Cloudfront will let us use something better than RC4 in the future.
Last edited by MkFly (2011-01-26 05:29:22) -
Getting: Unexpected Error when trying to upload files with my post!
Hello,
i tried today to post a reply to someone`s message t the forums but when i tried to attach 2 .php files i get unexpected error message and prevented me from posting the reply.
but when i delete or reloaded the page, i shows me an error message again, but the reply was posted without letting me know!
hope you can find a quick fix for that!
Best Regards
Waleed Barakat
[signature deleted by host]waleed,
i tried today to post a reply to someone`s message t the forums but when i tried to attach 2 .php files
Did you really mean .php files? I am not sure if you can actually post a .php file. I suspect you will have to either post a link to where the .php files are located or simply post the contents of the .php file into the reply. OR zip the file and attach the .zip file.
I hope that helps.
Hopper -
Have ipad2 & just added iphone5. iCloud offered to sync my calendars but it took blank iPhone calendar as default and wiped out my iPad calendar with my "life" on it! Can I recover the lost info?
If you backed it up to your computer using iTunes, restoring to the backup should recover it. (Apple's documentation isn't clear about whether or nott an iCloud backup includes your calendar events but it may.)
-
Safari And Firefox Crashes When Trying To Upload File
Hi,
I am having problems while pressing any upload button in any web page (facebook,gmail). Browsers are hanging on the action.
Below you can find stacktrace.
Date/Time: 2015-03-02 11:25:12 +0100
OS Version: 10.10.2 (Build 14C109)
Architecture: x86_64h
Report Version: 21
Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Version: 8.0.3 (10600.3.18)
Build Version: 1
Project Name: WebBrowser
Source Version: 7600003018000000
Parent: launchd [1]
PID: 681
Event: hang
Duration: 1.00s (process was unresponsive for 75 seconds before sampling)
Steps: 11 (100ms sampling interval)
Hardware model: MacBookPro11,1
Active cpus: 4
Fan speed: 1286 rpmFor me fix was to run Disk Util -> Repair Disk Permissions .
-
I have checked to see that my information is correct, it is. I sign in with my email because it will not accept my "username" for some reason. Is there a solution to this problem?
Oops
Forget that, wrong forum. -
Hi,
It is possible, But it has to be done through codes and iPlanet Web Server has nothing to do with it. But if you want to create the word document by ASP you have to install ASP plugin like ChilliASP (from Chilisoft) with iPlanet Web Server.Merging with database can be done through your code.
To know more abt creating word doc through ASP try this link
http://web.ukonline.co.uk/vance/code/aspworddoc.pdf
Regards,
T.Raghulan. -
Help required on iPlanet Web Server.
I am using iPlanet Web Server 4.1 to run my jsp' ans servlets. I need to know that if i write System.out.println("Hello World") statement in my Servlet, where it will get printed. Please let me know if theres some way for that. As this is very help full in knowing the prog flow.
In Jakarta-Tomcat a window popsup and System.out.println statments are printed there. Is there any way we can do with iPlanet.Hi,
You need to configure your web server.
FOllowing should help you to solve your problem.
http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsunone%2F4790&zone_110=4790%2A%20
http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsunone%2F4235&zone_110=4235%2A%20
http://sunsolve.sun.com/pub-cgi/retrieve.pl?doc=fsunone%2F4699&zone_110=4699%2A%20
-Amol -
Calling servlet problem in iPlanet web server.
Hello, friends.
I have installed iPlanet web server 6.0. After installation I am using the default virtual server only. Thus, for all testing pages also, I use the default Document Root only (C:\iplanet\servers\docs\testsite) (I think, here "docs" is the default document root, right? If I am wrong, please correct me). I have got 2 JSP pages and 1 servlet. I put the JSP pages, into "testsite" folder and put the servlet into a folder called "myservlets" (C:iplanet\servers\docs\myservlets).
The jsp1.jsp page calls the servlet.class and in return the servlet redirects to jsp2.jsp page.
My question is: what paths should I use in jsp1.jsp file and in servlet.class file?
Thanks in Advance for all your help,
~ NiravThere is a major security breach in authenticating
iPlanet Web Server 6.0 SP3 and SP4 using Sun ONE
Directory Server. Using a valid user id, any
password except null string would allow user access
the restricted resources. iPlanet Web Server 6.0 SP5
and 4.1 SP12 worked fine with similar configuration.Did you get an answer for this?
We are having the exact same problems with our iPlanet Web server 6.0 SP3.
thank you. -
I am using windows 2000.
iPlanet Web Server, Enterprise Edition 6.0 SP2
I tried to do jdbc persistence for sessiondata.
Somehow it didn't work.
I edited the JdbcStore code and added some system.outs in it.
From the logs I could note that
It is going into
JdbcStore.init(Properties config)//when the server starts up
JdbcStore.reap(long currentTime) //when the server is brought down
But it is not going into
JdbcStore.save(IWSHttpSession session)
JdbcStore.remove(IWSHttpSession session)
JdbcStore.load(IWSHttpSession session)
I did a "select count(*) from sessions" and it got me
no of rows=0.
The logs contained
[06/Mar/2002:11:25:09] info ( 552): IWSSessionManager: Maximum number of sessions is 1000
[06/Mar/2002:11:25:10] info ( 552): IWSSessionManager: Maximum number of sessions is 1000
[06/Mar/2002:11:25:14] info ( 552): JdbcStore: initialized with url=jdbc:odbc:LocalServer, driver=sun.jdbc.odbc.JdbcOdbcDriver
So I should think it was working.
The pages that are using HttpSession are working ok but should I not get some rows in my table "sessions" when I query?
This is the webapps.xml I used.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!-- iWS 6.0 specific web application configuration. -->
<!DOCTYPE vs PUBLIC "-//Sun Microsystems, Inc.; iPlanet//DTD Virtual Server Web Applications 6.0//EN" "http://developer.iplanet.com/webserver/dtds/iws-webapps_6_0.dtd">
<vs>
<!-- Define global configuration -->
<!-- Configure a session manager and tracking configuration -->
<session-manager
class='com.iplanet.server.http.session.IWSSessionManager' >
<init-param>
<param-name>maxSessions</param-name>
<param-value>1000</param-value>
</init-param>
<init-param>
<param-name>timeOut</param-name>
<param-value>1800</param-value>
</init-param>
<init-param>
<param-name>session-failover-enabled</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>reapInterval</param-name>
<param-value>600</param-value>
</init-param>
<init-param>
<param-name>session-data-store</param-name>
<param-value>com.iplanet.server.http.session.JdbcStore</param-value>
</init-param>
<init-param>
<param-name>url</param-name>
<param-value>jdbc:odbc:LocalServer</param-value>
</init-param>
<init-param>
<param-name>provider</param-name>
<param-value>sun.jdbc.odbc.JdbcOdbcDriver</param-value>
</init-param>
<init-param>
<param-name>username</param-name>
<param-value>sa</param-value>
</init-param>
<init-param>
<param-name>password</param-name>
<param-value>sa</param-value>
</init-param>
<init-param>
<param-name>lookupPool</param-name>
<param-value>4</param-value>
</init-param>
<init-param>
<param-name>insertPool</param-name>
<param-value>4</param-value>
</init-param>
<init-param>
<param-name>updatePool</param-name>
<param-value>4</param-value>
</init-param>
<init-param>
<param-name>deletePool</param-name>
<param-value>4</param-value>
</init-param>
<!--
<init-param>
<param-name>session-failover-enabled</param-name>
<param-value>false</param-value>
</init-param>
-->
</session-manager>
<session-tracking use-cookies="true" />
<!-- Define the web applications for this virtual server-->
<!-- catalog application -->
<web-app uri="/Web" dir="E:/iPlanet/Servers/docs" enable="true" >
<!-- Specify a tempory directory. A path returned in the "javax.servlet.context.tempdir" property; defaults to WEB-INF/tmp. -->
<!--
<tempdir dir='/var/catalog/tmp'/>
-->
<!-- reload classes at every 5 minutes; also include mycatlog.jar file in the classpath -->
<!--
<class-loader reload-interval='300' classpath='/home/work/mycatalog.jar' />
-->
</web-app>
</vs>I'm trying to do the same thing with a file store, also somewhat unsuccessfully. However, one thing I can point out is that the manual says that the <session-manager> element should be within the <web-app> element in web-apps.xml. In your example, it is outside of it.
-
Oracle iPlanet Web Server 7 - Configuration Failed
Hi There,
Installing Oracle iPlanet Web Server
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
Jul 5, 2011 4:29:16 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 4:30:19 AM com.sun.web.installer.web.actions.PostInstall_core
install
INFO: Start core server configuration
Jul 5, 2011 4:30:19 AM com.sun.web.installer.web.actions.PostInstall_core
installJDK
SEVERE: JDK copy failed
Jul 5, 2011 4:52:36 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 4:55:00 AM com.sun.web.installer.web.actions.PostInstall_core
install
INFO: Start core server configuration
Jul 5, 2011 4:57:07 AM com.sun.web.installer.web.actions.PostInstall_core
configureServer
INFO: Invoking the server configuration script
Jul 5, 2011 4:57:08 AM com.sun.web.installer.web.actions.PostInstall_core
configureServer
WARNING: The backend configurator failed
Jul 5, 2011 5:15:10 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 5:15:46 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 5:16:43 AM com.sun.web.installer.common.dialogs.
CustomDirectorySelectionPanel isDisplayComplete
INFO: Installing Oracle iPlanet Web Server 7.0.9
Jul 5, 2011 5:21:37 AM com.sun.web.installer.web.actions.PostInstall_core
install
What could be the problem?[root@local java]$ ls
default jdk1.6.0_02 jdk1.6.0_20 jdk1.6.0_26 latest
[root@local java]# ./setup --javahome /usr/java/jdk1.6.0_26
Product : Oracle iPlanet Web Server
Location : /opt/oracle/webserver7
Disk Space : 231.37 MB
Administration Command Line Interface
Server Core
Start Administration Server [yes/no] [yes] {"<" goes back, "!" exits}:
Ready to Install
1. Install Now
2. Start Over
3. Exit Installation
What would you like to do [1] {"<" goes back, "!" exits}? 1
Installing Oracle iPlanet Web Server
|-1%--------------25%-----------------50%-----------------75%--------------100%|
Installation Summary
Product Status Information
1. Oracle iPlanet Web Server Configuration Failed View log file
1. View log file
2. Done
What would you like to do [2] {"!" exits}?
I can not see the option. -
Having garbage characters while using enctype="multipart/form-data"
Hi to all! =)
I'm uploading a CSV file in JSP ny adding [enctype="multipart/form-data"].
<html:form method="POST" action="/upload.do" enctype="multipart/form-data">Now, I have a problem on handling Japanese Characters. (becomes garbage)
I have declared a UTF-8 charset above my JSP
[<%@ page language="java" contentType="text/html; charset=UTF-8" pageEncoding="Shift_JIS" %>]Using
System.out.println(response.getCharacterEncoding());in my action, I get "ISO-8859-1" instead of UTF-8
I don't have any clue why this has happened. Can someone teach me how to override the "ISO-8859-1" coding.
Any suggestions will be deeply appreciated.Hi to all! =)
I'm uploading a CSV file in JSP ny adding [enctype="multipart/form-data"].
<html:form method="POST" action="/upload.do" enctype="multipart/form-data">Now, I have a problem on handling Japanese Characters. (becomes garbage)
I have declared a UTF-8 charset above my JSP
[<%@ page language="java" contentType="text/html; charset=UTF-8" pageEncoding="Shift_JIS" %>]Using
System.out.println(response.getCharacterEncoding());in my action, I get "ISO-8859-1" instead of UTF-8
I don't have any clue why this has happened. Can someone teach me how to override the "ISO-8859-1" coding.
Any suggestions will be deeply appreciated. -
Help me Deploy WAR file in SUN iPlanet Web Server 6.1 SP7 using JDK1.6 & JS
Hi All,
Can any one help me on this.
I'm using
JDK1.6
JSF1.2
JSTL1.1
Hibernate3.2.5
ANT1.7
JUnit
HTML
Oracle10g
Trying to deploy this war file in SUN iPlanet Web Server 6.1 SP7. Can I use JDK1.6 & JSF1.2 in web server6.1What is the exact version of Web Server you are using? Should be in the error logs or try $start -version
It would be faster if you can capture and cut and paste the data that is sent between firefox and Web Server in both the cases using /usr/sfw/bin/ssltap (http://www.mozilla.org/projects/security/pki/nss/tools/ssltap.html) or ethereal when you try to view that shtml file. We can see if its any different in both cases and try it from there.
Also verify the steps given in http://docs.sun.com/source/817-1832-10/pgshtml.html
mime.types should have :
type=magnus-internal/parsed-html exts=shtml
obj.conf should have :
Service fn="shtml_send" type="magnus-internal/parsed-html" method="(GET|HEAD)"
When you activate parsing, magnus.conf should have :
Init funcs="shtml_init,shtml_send" shlib="install_dir/bin/https/bin/Shtml.dll" NativeThreads="no" fn="load-modules"
Shtml.dll (or libShtml.so on UNIX), is located in install_dir/bin/https/bin for Windows, and install_dir/bin/https/lib for UNIX. -
Deploy WAR file in SUN iPlanet Web Server 6.1 SP7 using JDK1.6 & JSF1.2
Hi All,
Can any one help me on this.
I'm using
JDK1.6
JSF1.2
JSTL1.1
Hibernate3.2.5
ANT1.7
JUnit
HTML
Oracle10g
Trying to deploy this war file in SUN iPlanet Web Server 6.1 SP7. Can I use JDK1.6 & JSF1.2 in web server6.1What is the exact version of Web Server you are using? Should be in the error logs or try $start -version
It would be faster if you can capture and cut and paste the data that is sent between firefox and Web Server in both the cases using /usr/sfw/bin/ssltap (http://www.mozilla.org/projects/security/pki/nss/tools/ssltap.html) or ethereal when you try to view that shtml file. We can see if its any different in both cases and try it from there.
Also verify the steps given in http://docs.sun.com/source/817-1832-10/pgshtml.html
mime.types should have :
type=magnus-internal/parsed-html exts=shtml
obj.conf should have :
Service fn="shtml_send" type="magnus-internal/parsed-html" method="(GET|HEAD)"
When you activate parsing, magnus.conf should have :
Init funcs="shtml_init,shtml_send" shlib="install_dir/bin/https/bin/Shtml.dll" NativeThreads="no" fn="load-modules"
Shtml.dll (or libShtml.so on UNIX), is located in install_dir/bin/https/bin for Windows, and install_dir/bin/https/lib for UNIX. -
After installing iPlanet Web Server v6 SP2 on Windows 2000 SP2, error message in the event log shows up. "The description for Event ID ( 0 ) in Source ( https-admserv60 ) cannot be found."
"The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: startup: server started successfully."
The iPlanet 6SP2 seems to work fine but these error message occur after rebooting the server. There is actually 2 messaages: one for the admin server and the
other for the actual web server instance. Both state
'server started successfully' but these messages still
appear.
Any ideas how to correct this?
Thanks,
JD Trinacathis will occur, as the 6.x servers do not use the lodctrl to place the perf monitor messages in the registry...as long as the server starts & runs ok, you can ignore these particular errors
Maybe you are looking for
-
Problem:Excise invoice and ARE-1
Hi Friends, Please help me... thanks in advance... Below are the details for Exports Scenario. Customer 123 is from US. Company ABC is in India. In Sales Order,Pricing details C.type Name Amount Currcy Per U Cond.Value Currcy PR00 Price
-
Excise and commercial invoice date
Hi, Generally commerical invoice will take actual PGI date. But my requirement is it should take the excise invoice date. If it is possible. Plz tell the process.
-
How can I update my email address on iCloud
How can I update my Apple ID email in iCloud?
-
I use Mac Mail. How do I set up an email to get a delivery or read receipt?
I use Mac Mail. How do I set up an email to get a delivery or read receipt? In other words, I want to receive automated confirmation that the email was either delivered, opened, or both -- which you can do in Outlook. I was not able to find this opti
-
Error while Updating "Failure configuring Windows updates - Reverting changes"
I've recently formatted my HP ENVY 15t-3200 CTO Notebook PC. When I'm updating the PC the Error of "Failure configuring Windows updates - Reverting changes - Do not turn off your computer" triggers on screen when the PC restarts after installing the