Hi I am using iPhone 4s.ATT confirmed my iPhone is unlocked. I am india now and I am using a simcard provide by a service provider in india. I followed the following steps. 1. Open iTunes on your Mac or PC and verify that you have internet connectivi
Hi
I am using iPhone 4s.ATT confirmed my iPhone is unlocked. I am in india now and I am using a sim card provide by a service provider in india.
I followed the following steps.
Open iTunes on your Mac or PC and verify that you have internet connectivity.
Connect your iPhone using the dock connector to USB cable that came with your iPhone.
Backup your iPhone.
Erase the contents of your iPhone
Restore your backup.
Swap the old SIM card with one for the new carrier.
Complete the Setup Assistant.
I am getting the following message
The Sim Card that you currently have installed in this iphone is from carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with iphone Please insert another SIM card from a supported carrier od request from this iPhone be unlocked by your carrier. Please contact apple for more information.
Can some one please help with me on this.
Regards
Titto
You are attempting to use the iPhone on a wireless provider that is not
supported. You will have to work with them to resolve any issues or
switch to a supported wireless provider. Which wireless provider are
you attempting to use?
Similar Messages
-
I am having trouble installing updates from iTunes. It used to work flawlessly. I am having trouble finding an email address where I can contact Apple or iTunes. I do not want to take the chance that they will charge me for a phone call because I think it is unfair for them to charge me, since I am using THEIR software already. THEY NEED TO PAY ME!!
Here is the error message I receive each time I try to install the updates:
"Could Not Open Key:
UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\7E577B2224C65CF4E801A9E52375 DB49. Verify that you have sufficient access to that key, or contact your support personnel.”
If someone would be kind enough to help me, I would greatly appreciate it!!
THANKS!!!!!!I am having trouble installing updates from iTunes. It used to work flawlessly. I am having trouble finding an email address where I can contact Apple or iTunes. I do not want to take the chance that they will charge me for a phone call because I think it is unfair for them to charge me, since I am using THEIR software already. THEY NEED TO PAY ME!!
Here is the error message I receive each time I try to install the updates:
"Could Not Open Key:
UNKNOWN\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\7E577B2224C65CF4E801A9E52375 DB49. Verify that you have sufficient access to that key, or contact your support personnel.”
If someone would be kind enough to help me, I would greatly appreciate it!!
THANKS!!!!!! -
Hi,
I'm not able to install itunes in my Win 7 , 64 bit. getting the below mentioned error.. any help would be greatly appriecated.
" Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify that you have sufficient access to that key. or contact your support personnel."NCPlater to all haveing the error: ***I HAVE THE ANSWER***
iTunes
Could not open key:
UNKNOWN\Components\DA42BC83BF25F5BDOAF18C3B9B1A1EE8\3e43b73803c7c394f8a6b 2f0402e19c2. Verify that you have
sufficient access to that key. or contact your support personnel.
After following instructions for three different solutions that did NOT work; I found the solution that did work
on the support site for Syamntec.
Readers - Please, you must be VERY familiar with pc jargon and windows vernacular to accomplish the reset
of ALL the permissions in your registry.
Follow the ditrections below and pay attention to the notes for those running 64bit Win7.
Step one, back up the registry.
Step two, go to the MS KB: http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf -ed6985e3927b&displaylang=en and download the file that installs subinacl. It is an MSI file, and will do a quick install of a few Microsoft files. Hint: Look in the folder listed below, "subinacle.exe" may already be there.
Step three, create a batch file (subinacle.bat) with the following commands: (Use Notepad - copy & paste, not the red stuff)
cd /d "Program Files\Windows Resource Kits\Tools" (only for 32bit/x86 machines)
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%\*.* /grant=administrators=f /grant=system=f
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
For 64bit machines substitute for first line of bat file:
cd /d "c:\program files (x86)\windows resource kits\tools"
Step four, run the batch file. Let it run until the Command Prompt screen closes, may take 30 minutes or more.
Step five, reboot the machine and run the install again.
Ladies and Gentlemen; this worked for me and allowed immediate installation of two application packages I had been trying for three months! (Including ITunes 10.5) -
What does this message mean?? "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services " I was unable to download Itunes.
Hi ahhan13,
Welcome to the Support Communities!
The article below may be able to help you with this.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567
Cheers,
- Judy -
That comes up but I look for the file on my computer and its not even there? I've had trouble updating/installing the new itunes for the last week any help would surley be appreciated.
Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2 -
hi,
i have problem when installing itune. it said:
Could not open key HKEY_LOCAL_MACHINE32\SOFTWARE|Microsoft\Windows\CurrentVersion\Run. Verify that you have sufficient access to that key, or contact your support personnel.
Please help me i can't do anything without ituneFor "Could not open key/write value" errors when reinstalling try b noir's user tip:
"Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\
[LongStringOfLettersAndNumbers]" error messages when installing iTunes for Windows.
The technique can be applied to the branch of the registry mentioned in the error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
When I was trying to install the update to itunes I would get the following message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. I could "Abort" "Retry" or "Ignore" I tried all of them starting with retry first. Nothing worked. I then uninstalled Itunes and tried to reinstall and received the same message. Not sure how to take care of it so that I can use Itunes again.
Try Troubleshooting issues with iTunes for Windows updates.
tt2 -
While installing the latest iTunes version I get the following msg:"Service Apple Mobile Device failed to start.Verify that you have sufficient privileges to start system services. I already tried it from the installer Running it as Administrator and still get the same message. I click "ignore" and finish the installation but when I try to open it I get this "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly." I already uninstalled iTunes and all other applications involved and re-installed itunes from the itunes site and the problem persists. Please help!
Solving MSVCR80 issue and Windows iTunes install issues.
-
When attempting to reinstall iTunes, I get the following message "Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services" Any help appreciated
Hi emelville,
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions that may help:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying a thorough uninstall and reinstall of iTunes as described here:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
- Ari -
Hi guys !
My problem is in installation/uninstallation of iTunes:
Could not open key:
UNKNOWN\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceList\Media. Verify that you have sufficient access to that key, or contact your support personnel.
The error appear first time in installation iTunes 10.3.1.55.
The error repeat in QuickTime, Bonjour, Apple Mobile Device Support, Apple Software Update, just changing the green area.
How i fix this ?
Thanks.
PS: Im administrator.Start>Run put regedit and press Ok.
1. Go to the key: HKEY_CLASSES_ROOT\Installer\Products\9B00314CD581E574FBCE93FE37F2911B\SourceLis t\Media
2. Right click in Media folder, select Permissions from the menu.
3. You will see that is no user, on the "Permissions for..." dialog box which appears next, press the "Add.." button and add in the "All"
4. Back on the first "Permissions for..." dialog box, click on each account in the top-list and make sure each has the "Full Control = Allow" and "Read = Allow" permissions
5. Click the "Advanced" button and the "Advanced Security Settings" dialog box appears
6. On the "Permissions tab" enable the checkmark box named "Replace all child object permissions with inheritable permissions from this object", then press the "Apply" button
7. On the "Owner" tab, highlight the "Administrators" name in the lower listbox, enable the checkmark box called "Replace owner on subcontainers and objects" and press the "Apply Button"
In my case, many errors appear before, but i fixing 1 by 1 and installation completed. Try and tell me later. -
I was trying to download iTunes on my computer, and while doing so, I got this message: Error writing to file: C:/Program Files (x86)/Common Files/Apple/Apple Application Support/Apple Versions.dll. Verify that you have access to that directory. I have downloaded iTunes numerous times and I have never had this problem. If anyone knows what's going on, I would really appreciate the help.
Well, there's definitely a mac and a Windows version. And you're at the right page. I think the problem is that someone forgot (or decided not to) to update the text at teh bottom of the page to have Mac and Windows.
Just push the button, you'll get the Mac update no problem.
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe -
when I install itunes i get error apple mobile device failed to start - verify that you have sufficient priveliges
try this:
Go to "SERVICES" on your computer and click on it, then when the list of services is present look for "Apple Mobile Device" and click on "Restart the service"
there is also one for iPod Service do the same thing. -
I just bought my IPhone and am also getting the the Service Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services. This is after following the uninstall/reinstall instruction. I am due to travel in 2 days and am very upset about this. This needs to be fixed!!!
http://support.apple.com/kb/TS1567
Log in to the Windows with "administrative rights". -
When trying to install iTunes, I'm getting the following error "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services". How do I fix this?
SAME EXACT PROBLEM! SO FRUSTRATED AND ****** OFF!
Maybe you are looking for
-
In a recent attempt to test the battery life of my 30G iPod, I changed iTunes' settings to manual update of my iPod. I knew this would force me to have to eject the iPod when I was done updating. However, now that I'm done with the test, I've changed
-
Import JBuilder into Sun Java Studio Enterprise 8
I have a few JBuilder projects that I would like to import into SJSE8. I have read all the guides for migrating projects from JBuilder but I cannot see how I actually get the Import Project module. SJSE8 is supposed to be built on NetBeans5.5 but whe
-
How to add a locally stored video file to a presentation
Hi all , I want to add a locally stored video file to a presentation .What is the url that i need to use.. Ur help is much appreciated Thanks
-
hi . i want to search for BADi's in a BAPI. On net i hv seen programs which gives list of all user-exits / BADI. but this program is for finding BADIs for a tcode or program not for BAPI. Is there any way to find out BADIs for a BAPI other than debu
-
Enabling Virtualization Technology to Install Windows 8 on Virtual Machine?
Hello-I have an HP HPE-310t Desktop computer that is currently running the 32-bit version of Windows 7. I'm interested in installing the Windows 8 Customer Preview on a virtual machine such as Virtual Box. I've done a little bit of research on how t