Hi - I can't seem to get a full list of my groups when clicking "address book" to manage and alphabetize

I have lists I can send to but can't find to manage when someone wants to get off the list. As a substitue I can find some of the lists when I'm writing a message and hiiting "properties", but they're not in alphabetical order and not all are there. Thank you

Open 'Address Book'
'''To remove a name from mailing list but keep in associated address book:'''
The Mailing List will be a sub list to an address book.
In the left Directory Pane select the mailing list name
A list of mailing contacts is shown in the right 'Contact Pane'
To sort by Name, click on the 'Name' column header, click again to reverse the order.
OR if rather lengthy list, use the search - type in Name.
'''To remove contact completely from address book and any sub mailing lists:'''
Please note that any name/contact must be in the address book in order to be placed in a mailing list of that address book.
If you remove them from the address book, then they are removed from any mailing list associated with the address book.

Similar Messages

HT1277 I can't seem to get gmail from my apple mail account. I have removed the account and added it, but it says I have the wrong password. I close gmail and get in just fine. What's up?

I can't seem to get gmail from my apple mail account. I have removed the account and added it, but it says I have the wrong password. I close gmail and get in just fine. What's up?

I meant that I sign out, sign back in ok. Ergo, I know my password. Someone here on the support page (you?) told me the culprit is the 2 step verification process which I had on. That makes a lot of sense as Apple mail won't get a code thereby jamming up the process. I could not even start a new account until I took that 2 step process off. Everything fine now thank you.

HT5958 updated10.1.1 and just opened FC, potponed project & events updating (not realizing what that ment) and now can't seem to get back to that. The above thread say "choosing File Update Projects and Events" but I do not see that option in my menu ???

I updated Final Cut and I postponed updating Projects and Events (not understanding that this mean I would have nothing in FC when it opened!). Now I can''t find how to go back so i can update those. The help thread says to use "file > Update Projects and Events" but that opinion is not in my menu ????? I also restarted my laptop but that didn't give me the option either....

The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '10,$d' /etc/hosts
You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

HT1589 I moved my media to an external drive so that I can access it from either of 2 computers. I can't seem to get my whole list in the library of the second computer. How do I get this reconnected?

I moved my itu nes media to an external drive so that I can access it from either of 2 computers. Now I can't see all my music in the library of the second computer. I was able to add 1 file to the library, but that will be exceedingly tedious to do for the whole list. There must be a better way.

File Add Folder to Library, and point it to the top folder on the external. That will cause iTunes to add all the files to the library.

I can't seem to get the iTS to update the description of my podcast, nor refresh to show new episodes?

I recently launched a podcast series (http://itunes.apple.com/ca/podcast/notes-from-northwest-passage/id449063851) but its still showing an older description text with some typos and an incorrect link in it, as I registered it with a pre-edited file so it would be in line for review while I finalized the details, and now I can't seem to get it to refresh and show the new texts at all, even though I edited the description texts in the xml file well over 2-3 weeks ago.
I've tried redoing this file several times. It always validates but changes never get picked up by the iTunes store.I can manually subscribe to the feed using iTunes' advanced menu, with no problems. The feed is at:
http://a4.g.akamai.net/7/4/66750/v1/smb2.download.akamai.com/66750/http/podcasts /archaeology2011/arcticarchaeology2011_eng.xml
I recently (about 3-4 days ago) tried redirecting the feed to a new version of the xml file stored in a new folder, just to see if that would somehow jolt it back into reading it, but again after 3-4 days it hasn't done anything.
It's also not showing any of the most recent episodes even though they have all been there about a week, so the store should have picked them up by now, no?
Any suggestions?

If you look at the feed, and look at the entry 'The end to an exciting field season in Aulavik National Park' you will see the line:
<pubDateFri, 29 Jul 2011 04:00:00 GMT</pubDate>
You have not closed the 'pubdate' tag - there should be a '>' as the 9th character. Because the tag has been left open, it invalidates everything which follows it, and thus the entire feed. iTunes therefore cannot read it, which is why the Store has not updated. Add the '>' and republish, and all should be well.
It's always worth checking your feed by subscribing manually, from the 'Advanced' menu, or by clicking the 'subscribe free' button on the Store page (both do the same thing) - if you can subscribe to the feed it should be OK.

I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

I am using an iPad and iPhone and have exchange as my email. Both will only collect mails when I am in the wifi of the office, and not when I am out and about. I can't seem to get a fix for it.

This - https://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default - didn't work?

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues. I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion.

I can't seem to get my iMac (late 2009 model) into automatic sleep mode. If I manually put it into sleep I don't have any issues.
I used to solve the issue by running "PleaseSleep" application but that doesn't work anymore since Lion. I now want to fix the underlying problem.
I'm not running any weird background processes and in my energy saver settings I've tagged "put the hard disk to sleep when possible:, "allow power button to put computer to sleep" and "automatically reduce brigthness". All pretty standard.
Is there anyone who can give me some pointers ?

Today I solved the same problem for my iMac running Snow Leopard. See https://discussions.apple.com/thread/3008791#15947706. The method may help you, too.
For me it was the DynDNS Updater preventing my iMac from automatically entering sleep mode.
To my knowledge the cause of this sleep problem can only be a peripheral device or a process. So I suggest to first unplug all peripherals and test whether that's the cause. If not, I suggest to terminate one process after another and to test automatic entering of sleep mode after each. Start with user processes; continue with system process if necessary.
At least that's the way I found the offending process. Fortunately, I was able to change the configuration of that process to allow again automatic entering of sleep mode.
Good luck!

HT3500 I have a MacBook Pro and an HP ENVY 110 SERIES All-In-One . I can't seem to get a network set up or either one to locate or connect to the other one.

I've spent hours, actually probably days, trying to do this but it's not working. I've had the ENVY since Nov
and have not been able to print - much less do anything else with it.
My internet is CLEAR wireless. I use the little USB 4G Mobil Modem. This new HP ENVY is also wireless.
I know I can't be online and print at the same time unless I get a router.
I also know that I can go offline and change the network pref to "airport" so I can print. Meaning I'll have to change
back and forth but for my uses, that's ok..at least for right now.
What I can't seem to get set-up correctly is my own local network.
I'm pretty sure it's suppose to be done using "Airport".
Obviously, I'm doing something wrong in establishing my network.
The printer is listed on my printer preferences and shown as "offline" "default". I assume that means the ENVY
is my default printer. Great! At least my Pro knows it's suppose to connect to the ENVY once everything's set-up correctly.
Now, if someone could just tell me exactly, step-by-step what to do to get that done....
I'd be soooo very happy!
Thank you!
Ricki

Well... no help was found here.. so I abandoned the wireless- ness of my printer. I bought a
small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
and any kind of printer. I also bought a long USB cable. I now print--wired since this can be done
as an alternative to wireless with this printer. Because I don't want a cable "hanging around"
when the printer is not in use, I simple disconnect it and reconnect when I want to print.
It's a temporary solution others may find helpful as well. Apparently there's been a lot of
confusion and problems getting this printer set up wirelessly with our MacBooks.
Shame on HP for not helping us out!

I have an ipod touch and it is locked and i can't seem to get into it. what can i do to unlock it?

i have an ipod touch and it is locked and i can't seem to get into it. what can i do to unlock it?

You have to input your Apple ID in the prompt when it pops up

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I've gotten a little further on this. The dynamic select is
working fine. It's the "a href" code that isn't. I'm wondering if
someone can look at this line and tell me if it's okay to build the
query string this way. The storeid comes through fine but I'm still
not getting the employeeid value to pass. Here's line that's not
working:
td><a href="registerStoreCust.php?storeid=<?php echo
$row_storeRS['storeid']; echo "&employeeid="; echo
$_GET['employeeLM']; ?>">Register
Customer</a></td>

I can't seem to get GB to recognize my Behringer X1222 USB Mixer. It will record, but shouldn't I be able to see and/or select which input channel(s) that I will record from? Can I record more than one channel at a time, and record multi tracks?

I can't seem to get GarageBand to recognize my Behringer X1222 USB Mixer. It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer. Can't find any drivers from Behringer. How do I getGB to "see" the mixer? Thanks, I'm a newbie to Macs in genreal, and recording...

viiram wrote:
It will record, but only on the generic "USB Input, without seeing or letting me select the input channel from the mixer.
the x1222 includes a 2 channel audio interface, 2 channels are all you can get from it.
the most you can do is record to 2 tracks at a time; skim this tute to see how:
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

On my ipod touch, i can't seem to get the imessage app.. I have updated my itunes and even restored the ipod to factory settings with the latest update. Maybe the ipod is too old? Help

On my ipod touch, i can't seem to get the imessage app.. I have updated my itunes and even restored the ipod to factory settings with the latest update. Maybe the ipod is too old? Is that even a thing? Is there another app I can download to have access to my contacts with imessage?

That comes with iOS 5 (Settings>General>About>Version) and only the 3G abd later iPods can go to iOS 5 or later
Identifying iPod models

HT201365 Just dowloaded the new ios 7, and i can't seem to get any apps to download in the app store. It doesn't have the meter bar anymore and all it does is have a Blue circle spin and spin for over 5 or 10 min. without nothing happening! Help !!!

Just downloaded the new ios 7, and I can't seem to get any apps to download in the app store. It doesn't have the meter bar anymore and all it does is have a blue circle spin and spin for over 5 min. without nothing happening! Help!!!

Hi,
This is how App Store app shows now when an app is downloading. If you cannot download anything, go to Settings > iTunes & App Store, remove your Apple ID, and set it again. That should work.
Hope that helps.

HT4623 I can't seem to get my keypad shortcuts to work on my iphone 4 after the ios6 update. Anyone have a fix for this?? Apple???

I can't seem to get my keypad shortcuts to work on my iphone 4 after the IOS 6 update. Anyone have a resolution for this??? Apple???

Unless Verizon has a special provision in this regard that ATT has never had, Apple handles all iPhone repairs and exchanges under Apple's warranty.
There is a setting when capturing photos - Automatic, On, or Off for the flash when capturing photos.
If there is no flash when set to On or Automatic in a dark setting and no change after the standard troubleshooting steps which in order are:
Power your iPhone off and on.
An iPhone reset.
Restoring your iPhone with iTunes from the backup.
Restoring your iPhone with iTunes as a new iPhone or not from the backup.
Your iPhone has a hardware problem. You can call AppleCare or make an appointment at an Apple store if there is one nearby.

I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV. Is this a design flaw? Or is it me? My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

I can't seem to get my iPod touch (4th Gen) to play photo slideshows or videos through my TV. Is this a design flaw? Or is it me? My old iPod used to do it no problem, but now I can't even find any video out options in the settings.

This cable And Im using a cable that has a headphone jack on one end and RCA cables on the other. does not work for iPod touches. See:
http://support.apple.com/kb/HT1454

Hi - I can't seem to get a full list of my groups when clicking "address book" to manage and alphabetize

Similar Messages

Maybe you are looking for