Hi i can't seem to write on a blank or any saved document??

hi i cant write on a blank or saved document?

Since you are obviously too busy to actually supply any details, we'll just start guessing shall we?
What version of Pages?
What version of OSX?
How did you buy/install Pages?
Any messages?
What exactly happens?
…anything?
Peter

Similar Messages

I have an external hard drive that was formatted by a PC and has files and directories etc. I want to format it and use it on my IMAC for backup but I can't seem to write to it nor can I delete current content. How do I initialize it for use with the MAC?

I have an external hard drive that was formatted by a PC and has files and directories copied to it etc. I want to use it on my IMAC for backup. I see it on my my IMAC . I can open files etc. But I can't seem to write to it nor can I delete current content. I don't care if I lose current content. How do I initialize it for use with the MAC?

You can't write to it because it's formatted as NTFS which OS X will read but not write to. If you want to continue using the drive with both a PC and OS X you will need to download and install NTFS-3G so you can then write to it from your Mac. You can get NTFS-3G at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If you want to use the drive exclusively with your Mac then move the data off it and reformat it in Disk Utility (Applications - Utilities - Disk Utilities) as Mac OS Extended (Journaled.)

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

I just purchased a Brother MFC-9340CDW all in one printer. It shows up on a list of compatable airprint devices but I can't seem to get it to work. Any suggestions?

Hi,
It won't work with airplay, here is how I got it to work with OSX 10.9.4 fully patched;
you will need to use the serial cable to start the process:
In-brief Version:
0) Go grab the firmware update tool, the driver, and the scanner software
1) Turn off the firewall and antivirus (if you use it ??)
2) Update the firmware using the serial line
3) Reserve a static IP outside the DHCP range (using the MAC address of the printer) on your WAP server
4) Configure the printer to use a static IP through the front panel
5) Configure the printer WIFI with your SSID and net key through the front panel
6) Install the CUPS driver on your computer through the printer settings by specifying the static IP
7) Install the Scanner driver then go into the Control Center and add you computer and printer configuration
I generally use this kind of set up so that the printer comes back at the same place after a power failure in
the event that it has a crappy driver.
For those of you who need a little more help:
0) Turn off anti-virus and firewall software (it did seem to matter)
1) Go to the Brother Center and download 1) The firmware update tool, 2) the driver, 3) the scanner software
2) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; find the MAC address and write it down
3) Plug the printer in using the serial cable, it will auto detect and you will be able to talk to it.
4) Install the firmware update tool by double clicking on the dmg you downloaded
5) Update the firmware and the subfirmware (NOTE: this is a bit finicky -- you may have to unplug and replug it in a couple of times before it starts to talk with the device, after it starts the update process it frequently gives up in the middle, DO NOT unplug the device at this point, just select "retry" from the dialog and it will continue -- it will take about 15 mins or so.
6) Once the firmware is installed, go to your WAP server and look at the DHCP IP range; typically something like 10.0.1.2 to 10.0.1.200
7) If there is a capability to reserve an IP on your WAP server pick an IP outside the range in 6 (e.g. 10.0.1.201) and use the MAC address (from step 2) for the reservation... its fine if you don't reserve it -- this is an extra precaution -- just make sure you pick an IP outside the DHCP range
8) Go to the front panel on the printer: tools -> all settings -> network -> tcp/ip -> WLAN ; then set the IP address:
     boot method: static
     IP address: the address you chose in 7)
     mask: 255.255.255.0
     gateway: the IP of your router -- typically 10.0.1.1
8) Go to the front panel on the printer: tools -> wireless -> setup wizard -> let it find your network, select it, and enter your key.
9) Reboot the printer and check it connects to your wireless network
10) Go to the front panel on the printer, tools -> all settings -> print reports -> network configuration ; print the report and check the IP and MAC
are what you think they should be.
11) Go to your computer, bring up a terminal (applications->utilities->terminal)
12) Ping your printer to make sure its up and accessible -- type: "ping 10.0.1.201" (or whatever IP you used in step 7) and check you get a response -- not a timeout -- if it works disconnect the serial line and delete the (serial line) printer from the list of printers -- you won't need it anymore -- if not you screwed up somewhere along the line
13) Now the printer is on the wireless network, install the driver by double clicking the dmg. Then go to system preferences->printers & scanners
     click +
     in the add menu click IP
     enter your IP (from step 7)
     make sure the Protocol is IPP
     Name the printer and set its location
     Go to Use field, in the pull down menu select "Select Software"
     Go through the list and find the Brother MFC-9340CDW CUPS driver -- if its not there you screwed up installing it so go do it again.
14) Go back to the printer page -- select the printer, select Open Print Queue, then select Settings -- check the Driver Version is 4.1.0 -- if
it says 2 you are using the airplay version which seems to be buggered -- so you need to try again.
15) Go open a word document and print it -- smile you are nearly there
16) Install the scanner software by double clicking the dmg
17) Open the Control Center, under the Model: select Other
     Click +
     Select your printer
     Enter your computer name in the display name and click ok
18) Go into adobe Acrobat File->Create->PDF from Scanner (or whatever software you are scanning with)
19) Select "Brother TWAIN" from the scanner list -- if its not there you screwed up the scanner software installation -- go do it again
20) Put a document in the top of the printer and press scan -- wammo !
21) Turn back on your firewall (and antivirus if you have it -- why I can't imagine but what the ****)
22) Go ping the printer and make sure its still reachable (see step 12) -- if not you need to figure out what your antivirus is screwing up because the firewall is no problem
23) try printing and scanning again...
24) rejoice... your done.

HT1918 I can't seem to update my apps or make any purchases on from my account. Nothing has changed with my credit card information and for some reason the iTunes Store tells me my information is incorrect. What do I do?

I can't seem to update my apps or make any purchases on from my account. Nothing has changed with my credit card information and for some reason the iTunes Store tells me my information is incorrect. What do I do?

Yes, it's frustrating.
I don't have my iPod with me but, as I recall, the change is done in Settings/Store. That change will apply to NEW purchases. However, be aware that all purchases are permanently associated with the Apple ID that was originally used. Generally, it's only a problem when you need to update an app. IF you do your updating from iTunes and your logged in to the "wrong" ID, you'll need to log out and back in again. It's easier from the iPod as you do not need to log out/in but you do need to know the password.
Unfortunately, you can not merge IDs nor can you transfer purchases from one ID to another. Go here to find out exactly what you have. I have the same problem so I deliberately made both passwords identical to make things slightly easier for me.

ITunes shows that there are no songs on my iphone but there are 274 songs there. The data storage shows up as "other" on iTunes. I just want to clear the music on my phone but I can't seem to do so. Is there any way to do this?

iTunes shows that there are no songs on my iphone but there are 274 songs there. The data storage shows up as "other" on iTunes. I just want to clear the music on my phone but I can't seem to do so. Is there any way to do this? You used to be able to swipe and delete a song straight from your phone but I can't seem to do that anymore.

That is stealing.

I recently update my iTunes and it deleted all my songs. I was able to get some back via iCloud but I can't seem to sync my old playlist. Any suggestions??

I recently update my iTunes and it deleted all my songs. I was able to get some back via iCloud but I can't seem to sync my old playlist. Any suggestions??

See Empty/corrupt library after upgrade/crash...
tt2

Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

Having a problem in iBooks. When I highlight a section I would like to copy the highlighted parts sometimes to post in my notes. Can't seem to get it to work. Any ideas?

Just noticed the same problem. I was able to do it before updating. Hope there's a simple answer. That is a big reason why I got the iPad and iBooks.

I suddenly have BING as my search engine. I checked my settings and Google is my search engine. I can't seem to get rid of this BING any suggestions?

I suddenly have BING as my search engine. I checked my settings and Google is my search engine. I can’t seem to get rid of this BING any suggestions on getting rid of it and getting back to Google?

Hello
I did remove Bing from the drop down menu, but it is still in Firefox as main search engine. I also did a back up and restore. Nothing has worked so far. I read a post that people were able to delete Bing from Explorer. I guess using Explorer will be my last resort.

I'm trying to update my software to iTunes 10.5.2. I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen. I can't seem to get past this loop. Any suggestions?

I'm trying to update my software to iTunes 10.5.2. I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen. I can't seem to get past this loop. Any suggestions?

If I go through the setup that you suggested, won't I screw up the existing software on my system?
No. The iTunes installer will first uninstall the existing version of iTunes and then put in the new one. (That's actually also what happens when you use Apple Software Update to install a new version ... it just doesn't show the uninstall phase like the iTunes64Setup.exe or iTunesSetup.exe does.)

The application "Microsoft Word" can't be opened-600. I cannot open any word document anymore. do not know what to do...please help

The application “Microsoft Word” can’t be opened-600. I cannot open any word document anymore. Every time this message appears. I went to apllications and open a new document but my word icon cannot open. Please help
Thanks
valerie

Word can't open or does it open but you can't open documentts?
If you have Office does Excell or Power Point open? If they do you can perhaps check for updates with either of them: Help > Check for Updates. You can also try to reinstall Office with your installation disks. Don't delete Office, just try to install it again.

Wrt610n problem, can't seem to write to hard drive

so i set up the router and have set up all the shares along with the user properties with admin status. I have mapped the network drive on Vista and am able to see the hard drive and play everything off it. But i cant seem to write to it, everytime i try to it says i need permission. i know i have connected via admin status with my user name not the admin user name since i cant seem to with vista.
suggestions? TIA

Hello there!
With your concern, are you connecting a USB thumb drive or HDD to the router? What's the difference?
With USB Thumb Drive attached to your router, it only reads it as NTFS and you have Read-Only permission to this. That means, only opening files. With HDD or hard disk drive, make sure it is formatted to Fat/Fat32 for read-write permission. Also, make sure the user you created on the router's storage settings is set to read-write permission as well. Take note that before you proceed with reformatting your hard drive, you have to create a backup first.
So far, this are the options you have to check. Also, test if you can read-write once the hard drive is connected directly to the computer.
Keep posted!
for heads up! <<<call_me_jam_>>>

Hi, I've just up-dated my OS in my MacPro 3.1 from 10.5 to 10.6.8 and can't seem to install my Logic Pro 8, any advise? can I install my Logic 8 in the 10.6.8 OS? Thanks

Hi, I've just up-dated my OS in my MacPro 3.1 from 10.5 to 10.6.8 and can't seem to install my Logi Pro 8, I can install the libraries but not the program, is it possible to install or do I have to up-grade to Logic 9? Thanks

It's either that Logic 8 is looking for the Rosetta emulation program or that Logic 8 was previously installed on this OS, in which case you will have to remove some preference files and install receipt.
I think the Rosetta emulation is downloadable for SL.

Can't seem to insert a copyright symbol from any font into a Photoshop document

- NOT a meta data question --
I merely want to insert a copyright symbol, in text. I am designing the reverse side of a postcard for printing, it is all text layers, and need to indicate a copyright.
I can not seem to find this symbol in any of the character sets of the multitudinous fonts I own. Nor have I found any easy way to see the character sets of these fonts. Must I create this as an image and import? Surely there is a more simple solution?
At this point, I will accept the symbol in any font whatsoever.
Thank you!

© Option G © Option G © Option G
Also open International Pref Pane. Check "Show input menu in menu bar" at bottom of the Input Menu tab window. Among the keyboard layouts, input methods and palettes turn on the Character Palett and Keyboard Viewer. Now they will be available from a menu extra near the clock.

I can only find the first page of a 5 page saved document on my macbook pro. Also all my sent email is missing.

I saved a 5 page document on my macpro laptop in iwork. I emailed the document. The person claimed she didn't get the email. When I went to look at my sent mail the entire sent mail folder is gone and my saved document is also gone except for the first page. What happened? How can I get it back?
Also, how did my Notes app stuff end up in my aol emal folders?
Message was edited by: nancyloufromny

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts. How far do you get?

I can't seem to get my iphone to update any higher.

i did three updates on my itunes its at the lastest version 10.4 but my device is still at 3.1.3 and all the apps that i want to use require at leat 3.2 or 4.0 anyone have any ideas on how to update it? i've tried checkign everywhere. and i don't knwo what's wrong with it. i had to do a restart becae the wifi wasn't working. the restore fixed that. but now i can't get it to upate any higher but the ituens is at the highest but the phone isn't goign up. help! it says that the ipod has the lateset update at 3.1.3
i'm not sure what kind of iphone it is.. it's got a silver back. (it was a birthday present) it came with no box or anyhting jsut the phone. i use it mainly for the apps on wifi and as an ipod.

If your iPhone Has this back then you have the first iPhone which can only go up to 3.1.3

Hi i can't seem to write on a blank or any saved document??

Similar Messages

Maybe you are looking for