Hi I cannot able to find my Message Interface in Monitor

Hi!
Plesae help me!

Hi Satish,
which surface are speaking about? It would be helpful if you describe a little bit your problem as we cant read your thoughts
Regards,
Udo

Similar Messages

Unable to find the Message Interface Receiver Determination

Hi Everyone,
I am unable to find the Message Interface Receiver Determination in the SAP BASIS 7.0 --> http://sap.com/xi/XI/System. in IR.
I am using P.I 7.0 SP 15
Could anyone let me know what could be the problem.
Regards,
Varun

Hi Sridhar,
I cant find the Message Interface Receiver Determination in IR under the standard SWCV SAP BASIS 7.0 and under the namespace http://sap.com/xi/XI/System. in IR.This Message Interface will be useful while configuring in enhanced Receiver Determination.
http://help.sap.com/saphelp_nw2004s/helpdata/EN/84/e8763c997fda50e10000000a11405a/frameset.htm
Regards,
Varun

Not able to find entity details in Controls monitor

Hi Experts,
We could not find the entity details in controls monitor.
Our System Details BPC 10.1 SP2
We have defined Controls, Control set and assigned the control set and activated control and work status. Maintained control level in Entity dimension.
Request to help me what could be the reason not able to see the entity details in control monitor.
Regards,
Chandra

Hi Experts,
Did any one come across like my issue and found solution?
Please share solution.
Regards,
Chandra

Transfer iphone 4s to z2? where do I find text messages?

i have just purchased a Z2 and used the sony bridge and the cable to attempt to transfer photos, etc. Everything seems to have worked, however my text messages are still blank. It completes with no errors and i have everything ticked. i've tried ticking just the messages part. still can't find any of my text / mms messages on Z2??

Hi there,
I have received my phone yesterday. First the Sony Bridge for Mac software said that it was not possible to transfer data to Z2. Later on it came back with another Sony Bridge for Mac installation (I guess it was a kind of update) and then I tried it again and this time it did not complain about my Z2 and transfered my data. I am able to find my messages under messaging app with icon, but I was not able to find my notes. I had to move my notes from Mac to Gmail and sync it via Gmail.

Message Interface in Integration Directory

Hi,
In Integration Repository, I have one send step in BPM.
I am sending one Abstract Interface from BPM. While creating Receiver Determination in Integration Directory,
I am unable to find the message interface which is created in Integration Repository.
Please let me know, if you have any thoughts on this.
Thanks & Regards
Katta Mohan Reddy

Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1822. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this is a good weblog to clear doubts with BPM. Hope it helps,
Cheers,
Divya

** Unable to see message interfaces in ID under Business Systems

Hi Friends,
When I create sender / receiver agreement in ID by choosing the respective Business Systems I am not able to see my message interfaces. Then, I checked the SLD, our SWCV under Products are not assigned in the Business Systems.
Then, I have assigned our SWCV (by selecting the product, be selecting the SWCV) in tehcnical system and business systems, saved and log off from SLD.
But, still those message interfaces are not appeared while select the Business systems. Those interfaces are abstract interfaces. I tried to close the IR and ID, open it again, still the same problem.
What could be the reason ? Reply friends,
Thanking you
Jegathees P.

Hi,
a new import of the Business System is not necessary.
1) Important is to activate the interface in the Integration Repository.
2) Checking in SLD that all installed check boxes are selected. In the Business System -> Installed Software -> select the Product and check that the SC is selected.
In IR it's enough to close the Business System and reopen it to see the new interfaces.
Regards
Patrick

Message Interface wont show up in receiver determination

Hi all,
I created an message interface in the design and exported to config. I created a service and this interafce shows up, but when I'm trying to create the receiver determination, this wont show up in the interface list.
Any solution? I appreciate your response.
Thanks
felix.

Hi Felix,
Having same problem. Not able to see the message interfaces for particular BS, while creating Receiver Determination.
Can you tell me, how you solved this problem ?
Thanks.
Regards,
Naveen

I am able to print but cannot scan as the error message shown is that 3510 series is not found.

I am able to print but cannot scan as the error message shown is that 3510 series is not found.
Rgds,
Sanjay

Hi VijayAhuja,
Welcome to the HP Support Forums! I see you are able to print but when you attempt a scan on your HP Deskjet 3510 you get an error message saying the 3510 series is not found.
I would first like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
What did the PSDR find, are you now able to scan with your DJ 3510? If you are still not able to scan please leave me with the following information:
1. How do you have the printer connected, USB or Wireless?
2. What is you current Operating system?
3. Do you have any anti virus programs running, Norton or McAfee, please disable and retry the scan?
I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

HT201272 I recently got a new computer and authorized it. I have only been able to find the newest of purchases. I am missing hundreds of downloads/playlists and cannot get them to sync from my ipod. How do I locate all my playlists?

I have hundreds of songs, most of them purchased from the ITunes Store. I am only able to find the newest of purchases. I have a new laptop (my old one died) and have de-authorized the old PC and authorized the new one.
I thought I might have two separate id's, for some reason, but am unable to find any info re the possible second one. i.e., cannot log in, apple does not recognize it as a user id.
Everything I have/had is on my IPod but I am unable to migrate the music from the IPod to my PC. I have downloaded all the updates for the PC and the IPod. I am at a loss as to how to recover my music and cannot find a way to contact anyone at Apple without having to pay a fee.
Any help will be greatly appreciated.
Thanks,
Judi Dupree

NicoleDianneAgnes wrote:
... I haven't yet gotten rid of the old computer, ...
That is good News...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also... Have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

TS2755 I cannot send or receive text messages to my family which all are connected to my bill. I was able to at first, but now it has stopped working.

I cannot send or receive text messages to my family which are all connected to my bill. We were are able to text and recieve before but now it has stopped working. We are able to text and recieve from other people outside our billing group. Please help.

Each of you needs a unique Apple ID for messaging, Facetime & iCloud.
Go to appleid.apple.com to create new Apple IDs.
Also:
How to change the Apple ID on my iOS Device
Settings > iTunes & App stores.
Tap your AppleID, sign out then sign back in with new AppleID.
Settings > Facetime.
Tap your AppleID, sign out then sign back in with new AppleID.
Settings > Messages.
Turn off iMessages then turn it back on with new AppleID.
Settings > iCloud.
Delete the account then turn it back on with new AppleID.

HT201210 I cannot sync my ipod touch, message says an error occured (6) ! did not find solution ?

I cannot sync my ipod touch, message says an error occured (6) ! did not find solution ?

Errors related to third-party security software
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

I cannot find the Messages app on my mac. I searched my Finder and the App Store and still nothing. What am I doing wrong?

What version of OS X do you have? Messages requires 10.8. Previously it was iChat (but does not have iMessage capability to send texts to an iOS device).
Matt

Apple mail search finds the message but cannot show its content, why?

Hi
I have a MacBook Pro with Mountain Lion installed on it. All the updates are also installed.
The problem is that I can quickly find a message among 100,000 messages sorted in different folders in Apple Mail, but as I click on the message, it keeps showing "loading..." and never shows the content of that message.
When I manually go to that message, Mail shows the content properly. So it happens only when I try to see the content of the message that has been found through search function.
Any ideas?
thanks,
Farshid

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "mdworker" (without the quotes) in the Filter text field. Select the most recent 50 or so messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are long runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.
Step 2
Do the same with the search string "mds".

Not able to find Message mappings & Operations mapping in NWDS 7.31

Hi Experts,
I've downloaded NWDS-EXTSOA-7.3-EHP1-SP12-PAT0001 in which Data types, Messages types and Service interfaces are visible, but the Message Mappings and Message Interfaces. Let me know how to fix this issue.
Regards,
Farooq

Hi Vila,
When tried with NWDS having same SP level i can see & access MM & OM .
Thanks for your suggestion.
Regards,
Farooq

Hi I cannot able to find my Message Interface in Monitor

Similar Messages

Maybe you are looking for