Hi, I got a problem with iMessage

Hi guys , when i try to send an iMessage it send an sms, what can i do?

Thats most likely a bad signal issue either on your end or the other phones end. Thats what happens when the signal is low or bad, it reverts to sms text. other than having better signal, not much you can do.

Similar Messages

Problem with iMessage

Hi all ! I have an Iphone 4 s and I want to use iMessage but i can't use it because it uses money. Why have I got this problem if iMessage sends messages free to all who have iOS ?

In a more helpful vein ... iMessage is stitched into the normal message, and swaps seamlessly between normal messaging and iMessage as and when it is required. Normal texts are shown in green, iMesages in blue. You can switch it on through settings>messages.
I'm still researching into exactly how this works with regards as to when it switches. I'll post back if I find anything worth knowing.
Hope that helps...

Got a problem with BIOS in my board MSI 785GM-E51

i have a MSI 785GM-E51 board,i got a problem with the graphic card bus interface,it still run in 8x not in 16x
i try to disable a onboard graphic on BIOS,but i not find it.
and last i try to update BIOS to v2.4 n' not work too.
this a example;

Quote from: Bas on 08-March-10, 21:21:36
You do not need to disable the onboard.
As for the plug-in card, there is nothing in the BIOS to make it work 8x or 16x.
Make sure your card is seated correctly, else it will work but at lower number of lanes.
What program is telling you it's 8x?
GPU-Z

PROBLEM with iMessage (Messages) on iPod touch HELPPP

We had a problem with iMessage. We're both using iPod touch with iOS5 version.
but we can't send messages. It says our emails/apple ids are not registered on iMessage.
I checked it on already on the Settings>iMessage> ON .
but still we cant use it. HELP PLEASE THANKS

Same isue when tryn to change advanced setting :
+Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: profiled|Service starting...+
+Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: MC|Profile MCConfigurationProfile 0x113b30 has no friendly name.+
+Mon Jul 5 15:51:41 iPhone ReportCrash[267] <Notice>: Formulating crash report for process profiled[266]+
+Mon Jul 5 15:51:42 iPhone com.apple.launchd[1] (com.apple.managedconfiguration.profiled[266]) <Warning>: (com.apple.managedconfiguration.profiled) Job appears to have crashed: Bus error+
+Mon Jul 5 15:51:42 iPhone ReportCrash[267] <Error>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/profiled2010-07-05-155139iPhone.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0+
Did you solved this issue ?
Message was edited by: lbarbisan

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

HT1222 Having a problem with iMessage on my iPad mini.

Bought my Ipad from the US & presently using it in Nigeria.I'm having a problem with iMessage on my iPad mini, I've been trying to activate it and I've been receiving an error message saying my password is incorrect which I'm pretty sure isn't because I still buy apps on the iTunes Store with it. What can I do?

Have you looked at some of the 3rd party apps that will do this for you? Some of them are iPodAgent for Windows, copypod, yamipod. Most of them can be found on versiontracker.com, if not try to "google" them. Also, if you have purchased music, you can now import that off your iPod to your new system. Hope this helps.

HELP! i got a problem with my mobo 945GCM7-L

HELP! i got a problem with my mobo 945GCM7-L
specs;
*mobo = MSI 945GCM7-L(MS-7507) driver installed
*cpu = Intel Pentium E2180, LGA 775
*BIOS = american megatrends version 3.1
*sdram = DDR 2 1Gb
*GPU = sparkle/ nvidia 8500gt ddr2 1Gb128 bit (direct X9.0c and driver installed)
*HDD = seagate sata 80Gb (3Gb speed enabled 'no jumper')
*OS = XP PRO SP2
PROBLEM:
*sometimes it just hang-up (one application only) like a simple Microsoft word 2007.
*while playing DOTA (LAN gaming) = in just a couple of minutes you will experience a lagged then suddenly you'll be disconnected from the game
Isolation:
change the SDRAM with lower and higher RAM = same problem
change the GPU with higher and lower model (driver installed) = same problem
cable connection + good connection = same problem
take note;
I GOT 4 UNITS WITH THE SAME SPECS = 4 UNITS WITH THE SAME PROBLEM
NOW WHAT???

Does it hang using the onboard VGA? Try with prime 95 or orthos for stability testing, what spec are your psus?
You could try the v3.2 BIOS but I'm not sure it will help you.

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me

I got a problem with my personal account data how can i recovery my icloud id information back i can't remember even my birthday pls help me how to recovery my id information back

Did you follow all of the instructions provided in the article that you linked from? If not, you must follow each and every step.
If you have, then all you can do is contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email: https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or ac

Hi guys.Got a problem with my iPhone 5. I bought it in a shop 4 month ago. After I got a visitor with iOS 7 on his phone he would like to charge his phone with my Laptop and cable.But when he plugged it in it showed a message wich says: " This cable or accessory is not certified and may not work reliably with this phone".
How is this possible? I then phoned the shop and told them my problem. When I gave them the details I also found out that the imei No. in the iPhone is the same as on the original box. But the the Serial numbers are different. I already try the support centre but I’m over the 90 days.And there is no Apple Store in Namibia. I hope someone can help me here. Thanks, Ralfar

You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

At the creation of MCD we got the problem with Request

Hi All,
we are all very new to SAP MI,
At the creation of CD we got the problem with Request
Creation of CD
we gave these entries
1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
 ->SyncBOs Expect Initial Value
 ->Data Visible to all
2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
 "Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
 ->Continue
 ->Create Request
 ->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"
can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
Thanks and Regards
Dileep Painnamaneni

Hi Dileep,
<<Creation of MCD >>
<<we gave these entries >>
<<1.Mobile Solution Name : CIBERNW
Version : 1001
Description : Ciber Netweaver Mobile
Cmponent Type : APPLICATION
Runtime Enviroment : JSP>>
In SyncBO tab we specified our SyncBO that is ZNWW_EX01
we selected the check two checkboxs that is
->SyncBOs Expect Initial Value
->Data Visible to all
Every thing is fine. We need to check Link to SAP MI Home page check box
2.when i am trying to save the MCD it will open one dialog box that is
"Object can only created in SAP Package " -> Continue
"Link to Transport " it says
"Include MCD in Transport Request", "Yes","No"
when i will go for "Yes"
it will give one more dialog box that is
"prompt of workbeanch Request"
it will give one Request bydefault that is "CNWK900030"
there we have some option that is
->Continue
->Create Request
->Own Request
which one we will select ?
i will go for Continue it will open other dialog box it says
"Include MiniApp in Transport Request"
it says "MiniApp must be assigned to a transport request"
i will go for continue it will the message in the status bar
"MCD Changed"
In SAP when ever we create any object(tables or MCDs) :
there are two things CUSTOMER NAME SPACE(stored locally in that system only) and FORIEGN NAME SPACE(can be transported)
CUSTOMER NAME SPACE objects starts with 'Z' or 'Y'
FORIEGN NAME SPACE objects starts with any other digit other than 'Z' or 'Y'
So youhave created MCD name CIBERNW which starts with 'C' (its not customer name space with z or y)
so it will be stored in package(so that this package can be transported to any other system later)
So what ever you have done is correct.
You can create your own request also.
But confirm once that whether you are supposed to store your MCD this that package.

can you please tell me this process is Right or wrong
if it is wrong can you please tell me the right process
and it will some default Requests which Request we need to select
or we need to create the Request where we need to create that
what is process we need to follow ?
So this is the concept of request.
So this request is nothing but....
When ever we create tables or MCDs we try to save it..so if we are trying to create objects in Foreign name space(i.e without 'Z' or 'Y' inthe beginning) so it will ask to create this object in a package which requires request(transport request)
All objects are stored in package,( so this package contains many objects like MCD,SYNBOS etc what ever we store in it) so we can transport this package from one system to another system so to transport we need to generate a transport request for that package and them release that transport request.....
So once the package is released and we try to edit or create new objects in that package it will ask for some new request.....
Yes we can create our own request and later release it.
But in your case u can take up the default request and continue.
If this MCD is for only testing purpose(for our selfs)..means this MCD is just for our testing sake..its better to create it in Customer name space..starts with 'Z' or 'Y'.
I hope its clear.
Cheers,
Karthick

Hi , I have an iPhone 5S and I have got a problem with the app store : iI can't update my apps , it is asking me to change frim the UK store to go to the french one , but i have already changed it and I am in the French one !! Help ! :(

Hi , I have an iPhone 5S and I have got a problem with the app store : iI can't update my apps , it is asking me to change frim the UK store to go to the french one , but i have already changed it and I am in the French one !! Help !

Have you tried signing out of your iTunes & App Store on your device and then back in again - Settings>iTunes & App Store, click on Apple ID, then on Sign Out. Then sign in again and see if it accepts the password.
If that doesn't resolve the issue, try resetting your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the reset is complete, the Slide to Unlock screen will display. See if the problem is resolved.
Cheers,
GB

Problem with imessage "non distribué"

hello
I have a probleme with imessage,when i send a message it says "non distribué"

http://support.apple.com/kb/ts2755

R7770-PMD1GD5 got a problem with assassin's creed 3

bought this card
and got this problem with max setting.
This happens when I turn AA to very high. What is the problem?

Quote from: knight_9 on 14-December-12, 14:37:35
No, this only happens with AC3. I tested it with Far Cry 3 which the only graphic intensive game I have at the moment. I can max out the setting with FC3, the game is choppy but I can't reproduce the case.
First of all, the market is full of buggy games.
Secondly, R7770 is a mid-range (cheap) graphics card.
With only 128 bits memory interface, don't expect to play complex games at high resolutions, 8X AA and great FPS values.
To get an idea, GTX 560 is faster than R7770.
GTX 560 is a good GPU, but not a great one.

Problems with iMessage across mobile devices

My wife and I both have iOS 5 on our iPhone 4's, and I have iOS 5 on my iPad 2 as well. I receive her messages from her phone on both my iPhone and my iPad, but my iPad won't let me reply: the Send button is blue, but the word "Send" stays grey, and won't function. Obviously it is receiving messages just fine, so I have something right in the settings, but why can't I send a message? It doesn't matter whether I am in my home wi-fii, or running across 3G- it won't work either way. Please help!

I am having huge problems with imessage. I go to send an imessage and the sending bar at the top gets to around 90% and then just stops. It takes around 10 minutes before it finally says fails. Often you dont even realise it has failed as it says it has sent, yet when you check your phone there is a red dot against it. This is a huge problem both in and out of wifi areas. My phone is usless when trying to text my wife who also has an iphone 4s as it only sends an imessage around 50% of the times I Try.

REAL problems with iMessage activation same with Face Time

I'm having real problems with IMessage activation same with FaceTime, the phone shows the activation is being made but it does not activate!
Apple ID and password is OK, it's working with other applications
Any ideas guys?!

My daughters had the same problem with both of their iPod Touches. One logged back into iMessage and FaceTime, the other consistently would not login with the same error, "An error occurred during activation. Try again."
Check your date and time. Its likely incorrect. Once the date is corrected. Restart the device.
For what ever reason, some devices lose track of the date. In my case, apparently, my daughters change the date to affect a particular game by advancing the date. Little cheaters. (LOL)
Hope this helps!

Hi, I got a problem with iMessage

Similar Messages

Maybe you are looking for