Hi, I GOT MESSAGE SAP system slow . what we need to do?
I GOT MESSAGE SAP system slow . what we need to do?
Well... that is what its all about!!
If you were german you would know the meaning of abbreviation S A P ...
...its [Sanduhr|http://dict.leo.org/ende?lp=ende&lang=de&searchLoc=0&cmpType=relaxed§Hdr=on&spellToler=on&search=sanduhr&relink=on] [Anzeige|http://dict.leo.org/ende?lp=ende&lang=de&searchLoc=0&cmpType=relaxed§Hdr=on&spellToler=on&search=anzeige&relink=on] [Programm|http://dict.leo.org/ende?lp=ende&lang=de&searchLoc=0&cmpType=relaxed§Hdr=on&spellToler=on&search=programm&relink=on]
So actually you don't have a problem and there is nothing you need to do!! It's working as intended!!!
/cheers
Similar Messages
-
ERROR MESSAGE sap system manager:work process restarted, session terminated
Hi,
i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
SAP Version :ideas 4.7
Database :Oracle
OS : windows 2003
Module user is working on MM
user working on it is a Super user with all the permissions
SAP is configure to run under the European date and decimal format.
I have never done any database administration on it, it is a new install and has been rarely used.
User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
Below are the details of the error message from ST22 :
name of the runtime error : system_core_dumped
below are the details of the error message and its resoltion as suggested by sap help :
========
Runtime Errors SYSTEM_CORE_DUMPED
Occurred on 01.02.2008 at 07:52:19
Process terminated by signal " ".
What happened?
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLCLSC" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An SAP System process was terminated by an operating system signal.
Possible reasons for this are:
1. Internal SAP System error.
2. Process was terminated externally (by the system administrator).
Last error logged in SAP kernel
Component............ "Taskhandler"
Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"
Version.............. 1
Error code........... 11
Error text........... "ThSigHandler: signal"
Description.......... " "
System call.......... " "
Module............... "thxxhead.c"
Line................. 9555
How to correct the error
The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'.
Save this file under another name.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. " "
Application server....... " "
Network address.......... " "
Operating system......... " "
Release.................. " "
Hardware type............ " "
Character length......... " " Bits
Pointer length........... " " Bits
Work process number...... " "
Short dump setting....... " "
Database server.......... " "
Database type............ " "
Database name............ " "
Database owner........... " "
Character set............ " "
SAP kernel............... " "
Created on............... " "
Created in............... " "
Database version......... " "
Patch level.............. " "
Patch text............... " "
Supported environment....
Database................. " "
SAP database version..... " "
Operating system......... " "
User, transaction...
Client.............. " "
User................ " "
Language key........ " "
Transaction......... "ME41 "
Program............. "SAPLCLSC"
Screen.............. "SAPMM06E 0320"
Screen line......... 71
Information on where termination occurred
The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".
The main program was "SAPMM06E ".
The termination occurred in line 131 of the source code of the (Include)
program "LCLSCF2G"
of the source code of program "LCLSCF2G" (when calling the editor 1310).
=============
i even tried increasing the dialog processes but with no use.The same error occurs.
I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
thanks
mudessir.Hi
follow correction method suggested in this dump,
" The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
contains a file called 'core'. Save this file under another name."
have you done this?
with regards,
raj.
<i>pls, award points</i> -
CODEC Message have no idea what I need to do
Hi,
I just got Premiere Elements 9 as well as Photo shop 9. Loaded it. I can pull up previously made videos but when I go to pull up video files I get the message this type of file not supported or the required codec is not installed. Have not idea what a codec is and what I need to install to fix. thanks sarahRead Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Also, For Windows (not sure about Mac) This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1 -
Have a multi coloured circle which is making system slow - what can I do to resolve this?
Hi, I have a multi coloured circle that keeps coming on the screen making moving around my mac incredibly slow - any suggestions on how to remove this annoying thing?
Many Thanks
VanessaFirst, back up all data immediately, as your boot drive may be failing.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting. -
I cannot respond to my online school who uses the cloud system and my cloud on my ipad is turned on and I have the proper IOS. What is the problem?
Unfortunately yes, though technology would never move on if it kept to older standards and did not strive to do more.
The app store always gives you the option to use a previous version of the app IF it is available for your device.
Sorry but you are stuck without new hardware.
PJRS -
When trying to install itunes i get a message about system services, what's up?
Trouble installing itunes. Started when I tried to update itunes and ending up having to delete it from this computer. Anyone else having trouble with the new version of itunes installation? Thanks in advance.
Definitely.
Check out this tip : https://discussions.apple.com/docs/DOC-6562
Does that help at all? Do you get any of those errors?
What exactly is the error you get? A screenshot would be best. -
Unable to Log-in *SAP System Message : Error while reading a Dynpro*
Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started. -
Using ale u can send from sap to sap and sap to non sap systems
hi,
using ale u can send from sap to sap and sap to non sap systems,
then what is diff b/w ALE and EDIHello KALYAN KUMAR,
Application Link Enabling (ALE)
1.You distribute data using ALE if you want to communicate from one system to one or more other (mostly internal) systems.
2.ALE transfers data in IDoc format and uses the methods of tRFC for data transfer.
3.ALE enables the integration of business processes across several SAP or non-SAP systems.
Electronic Data Interchange (EDI)
1.You use EDI if you want to exchange business application documents with an (external) partner system (for example, a customer or vendor).
2. The SAP system sends EDI messages in IDoc format to an EDI subsystem, where they are converted to a universal EDI standard (UN/EDIFACT or ANSI/X12).
3. This enables communication with non-SAP systems.
By definition, two partners are involved in the process in an EDI application scenario: The sender and the recipient of an EDI message
I hope u understands the difference:) -
Unable to add SAP system to SLD
Hi all,
I am trying to add a new SAP WEB AS 640 system to my SLD.
But the SLD only shows latest available Product version as 620.
I downloaded the latest cimsap,CR_Content,CR_Delta zip files from the marketplace.
On applying note 669669, import of cimsap.zip file is successful, but import of latest CR_Content file gives following error: <b>"The content version 2.0 of the full import does not fit to the current content of the target namespace."</b>
I am unable to add the SAP system. What should I do?
Regards,
Puloma.Hi Puloma,
Follow the steps specified in this link.
http://help.sap.com/saphelp_nw04/helpdata/en/2c/5f7ecd8ddc454ca86ff6e53919b0d1/content.htm
Please reward appropriate points.
Bala
Message was edited by: Bala Krishnan -
Call a remote RFC from one sap system to to other sap system
Hi experts,
I'd like to know how to connect two sap systems via RFC. The two systems are in the same network and I'd like to know how to set up the SM59 in order to create the destination to the RFC.
Any help in configuring the SM59 to stablish the communication?
thanks a lot.<b>You can do that from t-code SM59 or SALE</b>
This step is to create the Logical system for the remote system.
A logical system allows SAP internal functions to interface with external systems, either an SAP system or a non-SAP system. We also need to have a logical system name for the SAP system,.
SALE is the transaction.
Expand the Sending and receiving Systems and then the Logical systems click on define logical system.
You will receive the informational message, The table is cross-client. Click the green check icon to continue.
Now click on the New Entries.
The Screen appears like this here you will be giving the LS name and the description of that.
After u click on the save button a window will be displayed like the bellow asking for the Request ID. Here we can create our own or we can use the existing one.
After that we see the message blow as DATA SAVED.
Now the step is to Link the LS to the client.
Click on the Assign Client to LS .
The Screen as below will be appearing.
Double click on the client on which u r going to work and there specify the SAP LS(IDS47800) and you also need to specify the City and Std Currency and the client role as Test for the drop down box.
Register the RFC server module with the
SAP gateway
The RFC (Remote Function Call) destination is a logical name used to define the
Characteristics of a communication link to a remote system (in our case, LS for the remote system) on which a function needs to be executed. In ALE, the RFC specifies information required to log on to the remote SAP system to which an IDoc is being sent.
To register the RFC Sever Module as the RFC destination:
SAP transaction code: SM59 Type /nsm59 on the SAP input window and press the
Enter key.
Expand the TCP/IP connections directory.
Give some name to the RFC Destination (ALESERVER), Connection type as T. and fill the Description field.
In technical settings give the program name as you desired.
Click on save
regards,
srinivas
<b>*reward for useful answers*</b>
Message was edited by:
XI_Novice
Message was edited by:
XI_Novice -
We are in cut over face of implementation project.
We have already QI stock for multiple materials outside SAP system, now we want to upload this stock in SAP system.
What is the best approach in this situation?SAP has a standard process for this.
In the QM plant settings on the tab insp. lot creation, you shoudl find a field call "InstypeForInspStock".
Per the SAP standard, you enter 0800. (you can try another inspection type, but this one works!)
Make sure in config you have defined a task list usage for inspection type 0800.
Make sure you have not turned on QM for any of the materials you are planning on loading inventory for. If you already did, you'll have to use QA08 to deactivate all inspection types before doing the inventory load.
Load all your inventory, including the QI stock into QI stock via IM.
Use QA08 to turn on all your inspection types. On the QA08 screen you'll find an indictor "Activate despite insp. stock". Make sure this is clicked on when running QA08.
One you have run QA08 for all the materials, all those with stock in QI should now have inspection lots associated with them.
They will be an 08 origin and 0800 inspection typ.
Be careful. Once the inspection types are created, you won't be able to load additional qtys to QI via IM. You only get one shot.
FF -
SAP System is not the original system of the object being edited
Hi All,
We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
How we can resolve this situation.Hello Guys,
Thks for your input.
@Vinod,
We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its a replica of old dev to nev dev with SID change.
@Arjun,
I already check TADIR table and and its pointing to new SID.
@Ashok,
As i said earlier,post intallation is already completed.
Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
Thx,Nilesh -
DNS Domain Name for SAP System
Hi,
I am installing BI7.1 , it is asking for DNS Domain Name for SAP System.
What to give i dont know please some one help
Thanks,
JackHi,
Pls chk this link;
http://en.wikipedia.org/wiki/Domain_name_system
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
Regards
CSM Reddy -
2 file sources to one SAP system.. Is BPM req?
Hi All,
I have a scenario where I am getting file from two diff file sources, I have to perform N:1 mapping on them to send it to one SAP system?
do i need BPM, if both the files are available at the same time?
do i need BPM, if both the files are not available at the same time?
XIerHi,
If we go for N:1 mapping, then without BPM its not possible.
<i>do i need BPM, if both the files are available at the same time?</i>
Yes - The BPM process will complete immediately.
<i>do i need BPM, if both the files are not available at the same time?</i>
Yes - But in this case the BPM process will not complete, it will wait until it receives the second message. Also it depends how u define the condition in Fork step.
Best regards.
raj. -
How to batch upload some data into SAP system?
Hi All:
I'm a SAP key user in our company, I want to know how to batch upload master data into SAP system? What t-code we can use for batch input?
Thanks in advance!Hi,
I think at least there are four methods for batch input which you can use in SAP system:
Standard mass change t-code: for example, MM17 for mass change of material master data, you can find the mass change t-code under the relevant function module;
T-code SCAT, you can use to record and generate the simple batch input template, it's easy to use for key user;
T-code LSMW, it's another transaction to generate batch input template, it's often used at the beginning of SAP rollout;
ABAP program, of course, ABAP is a universal tool for everything, you can use ABAP to generate a batch input program to upload data into SAP system as well.
So you had better contact your SAP support department, help you to upload data!
Good luck
Tao
Maybe you are looking for
-
I have FF5 on a portable device (a USB drive). I set up a sync account from that and have the code. I want to sync the FF on the USB with FF on the my various desktops, starting with my WIN 7 home desktop. On home DT, went to Options, Set up Sync, cl
-
I have a new desktop running Vista (old PC runs XP). I installed itunes and plugged my itouch in and it wouldn't sync – it kept giving a read / write error. A restore didn't help so I scoured this forum and in desperation rang Apple yesterday. The la
-
SetString/executeBatch fails in Oracle 10g OCI JDBC driver
Hi, I am using Oracle 10g OCI jdbc driver for batch updates. Following is the the code that I am using import java.sql.*; import oracle.jdbc.*; import oracle.jdbc.pool.OracleDataSource; public class BatchUpdates public static void main(String[] args)
-
Newbie Question: Command for only Y or N in a column.
I am just starting on SQL developer and need to know how to enter the command to change a table so that it will only accept a Y or N in the column. I know this is exceedingly simple but how do do it appears nowhere in my textbook. Thank you!
-
FilesystemMountPoints for ufs disks mounted to non-global zones
Hello, I have a SAN ufs disk to be used as a failover storage, mounted to non-global zones (NGZ). Solaris 10 nodes using Cluster 3.2 I'm looking for the correct value for the property FilesystemMountPoints and the vfstab entry required for a failover