Hi,i hav a new laptop nd my songs on iphone is not stored in this computer,how can i store this songs from my iphone to my computer using itunes?? i hav tried other third party softwares but to use them i need to pay....pls help if possible.

I am using itunes 10.4.1.10 version nd my iphone 4 is on 4.3.5....if anyone can help me would be very greatfull.
Thank you.

If you are not interested in purchasing any software, then your only other choice would be to take your iTunes backup that you made of your iTunes library and copy that over to the new computer. If you do not have that, then it could be difficult. However, if all of the content was purchased through iTunes, then after authorizing the computer with the Apple ID the songs were purchased on, you can transfer the purchases to the new computer.

Similar Messages

  • I have tried to update my software but it keeps saying i need the os x 10.5, i downloaded it but it gives me a prompt when i try to click on it saying that my software needs to be updated to 10.5, what do i do?

    i have tried to update my software but it keeps saying i need the os x 10.5, i downloaded it but it gives me a prompt when i try to click on it saying that my software needs to be updated to 10.5, what do i do?

    Hi, and welcome to Apple Support Communities.
    Mac OS X 10.5 is not a free download. You have to buy it.
    http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC
    Not all iBooks are compatible with Mac OS X 10.5. Check out the system requirements here:
    http://support.apple.com/kb/HT3759?viewlocale=en_US
    Good luck.

  • I have tried to download an app but it says that i need 10.8 or later on my macbook air i have checked for software update but none i am on 10.7.5

    i have tried to download an app but it says that i need 10.8 or later on my macbook air i have checked for software update but none i am on 10.7.5 the app is pocket planes HELP PLZ
    i would really apprechiate it
    thank you very much
    Josh Stainsby
    [email protected]

    http://www.apple.com/osx/specs If your Mac is supported, open App Store, make a backup and purchase Mountain Lion. See if your programs are compatible > http://www.roaringapps.com

  • I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable on that is 2TB or a third party software that is compatable with the need I describe?

    I'm trying to find an external drive for the MacPro that will allow me to password protect the external drive in case it is taken.  Any suggestions on a very reliable one that is 2TB or a third party software that is compatable with the need I describe?

    How much of a hurry are you in, and are you considering upgrading to Lion?
    File Vault on Snow Leopard only encrypts home folders you select, and doesn't work well with Time Machine.
    But Lion will have "full disk encryption" of local or external disks.  See File Vault 2 here: http://www.apple.com/macosx/whats-new/features.html

  • Send Fax without Esker or other third party software

    I wanted to know if there is a way I can send PDF file faxes from SAP to physical fax machines without using third party softwares like Esker. If so can someone provide me as much details as possible

    Hello,
    You can try with SMTP, refer to SAP Note: 455127 and 455140.
    Regards,
    David

  • How can I get past the wifi page during setup on iPad 2? I've tried hitting the next button but my screen is cracked and I can't press it

    I've tried pressing the next button but my iPad is cracked in that spot.

    I'd "get past" that problem by getting a new iPad!

  • New 3rd Gen. 4 GB iPod Shuffle not being recognized by computer or iTunes

    Hey everyone, I've read some of the other posts here on this thread about other people having problem getting their computer to recognize the new 4 GB iPod Shuffle when plugged into the USB drive, and it seems like I am having a very similar issue. I just received my iPod in the mail a few days ago and tried plugging it into the USB and got NO response whatsoever from my computer or iTunes. I am operating with Windows XP (Service Pack 3) on a Dell Inspiron Intel processor, 2 GHz with 3 GB RAM, with iTunes 8.1 (just updated). When I put something in my USB usually I hear a noise (sounds like DO-do ha) which tells me that my laptop recognizes whatever is plugged in, and usually I get a little box in the bottom right hand part of the screen that says it's been plugged in. I didn't get any of this when I plugged it in.
    When I first opened the box I turned the shuffle on and the light went green for 1 second, orange for 1 second, red for one second, then dead..I suppose this is expected since I figured it's new and needs to be charged, so I turned the shuffle off, plugged the USB into the earphone socket then into my USB, and then turned the shuffle on, and got nothing but the same sequence of lights. It's one thing if iTunes just didn't recognize the shuffle, but I checked the Device Manager and My Computer and the USB drive wasn't even listing the shuffle as being plugged in..maybe the USB cable that came with it is faulty?? I read all of the technical troubleshooting notes on here and tried the 5 R's and nothing is working at all..
    I do have one guess about this though..I also have an 80 GB iPod 5th generation that I've used for over a year now for my car and that plugs into the USB fine with its respective cable and is recognized by iTunes..my question is, can my iTunes only recognize one iPod at a time? Does it reject the shuffle because iTunes is only allowed to sync to one iPod per account? If this is true, is there a way around this so it can sync both, or can I have two iTunes accounts on the same computer? But why does the computer not even recognized it when plugged in? Hopefully it is just the cable that is damaged and not the device..wow this was long, but any advice would be greatly appreciated, thank you!

    GTEagle05 wrote:
    I do have one guess about this though..I also have an 80 GB iPod 5th generation that I've used for over a year now for my car and that plugs into the USB fine with its respective cable and is recognized by iTunes..my question is, can my iTunes only recognize one iPod at a time? Does it reject the shuffle because iTunes is only allowed to sync to one iPod per account? If this is true, is there a way around this so it can sync both, or can I have two iTunes accounts on the same computer? But why does the computer not even recognized it when plugged in? Hopefully it is just the cable that is damaged and not the device..wow this was long, but any advice would be greatly appreciated, thank you!
    According to http://support.apple.com/kb/HT1495
    iTunes for Windows does not support having multiple iPods *connected simultaneously.*

  • My ipod will not let me put music on it, it takes forever to put music on and once ejected properly it says no music, i have tried reseting and restarting software but nothing, HELP! i need my music

    my ipdo randomly deleted all its music so i had to start again adding it all, it took absolutly forever to do which was unusual and once it said completed and i ejected it it just says no music and full free space still, i tried reseting and rebooting the software and various other tips onling but nothing will let me put music on and actually keep it on my ipod.

    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    Do the songs play in iTunes?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod        
    Try syncing using the manual method

  • HT5037 I am trying to open my iPhoto, but it tells me I need to upgrade.  Help?

    I can't opne my iPhotos.  It tells me I need to upload using the Library Uploader.  I download as instructed, but it doesn't seem to download.  I can't open my iPhotos.  Help!

    Okay- so here's the long story!
    Perhaps this will help.
    My computer crashed a few months ago. 
    We got a new hard-drive.
    I tried to open my iPhoto for the first time and go some message about it being "locked".  I no longer get that message so I don't remember entirely what it said, but I followed to directions to "unlock" it.
    Now, when I click 'iPhoto" on my dock, I get this message: 
    To open your library with this version of iPhoto, it first needs to be prepared.
    To prepare the library, use the iPhoto Library Upgrader available from Apple.
    then there is a "learn more" button.
    When you select that, it takes me here and this is where my discussion started.   http://support.apple.com/kb/HT5037
    I followed the steps to upgrade from previous versions- see my comment above, but I get stuck from 8.1.2 version to what appears to be the next one up from there.
    Does this help?  I hate computers and simply want get my photos back from Carbonite before the crash happened.  I'm freaking out because I have 4 years of photos from the birth of my son.  If I can't get iPhoto working, I have no idea how to get my photos restored.
    <sigh>

  • In the new update, if i open a new tab, i see my history.... i DONT like that, how can i make it all go invisible or white like it used to be before the update?

    i get all kind of boxes with history and i dont want that. any way to change it would be AWESOME!!!!!
    thanks in advance.

    hello, please refer to the following article in order to switch this new feature off: [[New Tab Page – show, hide and customize top sites]]
    edit:argh 40 secs

  • Database privileges for integration between EBS and Third Party software

    Hi,
    We have engaged a third party invoice scanning software vendor that wants to install database components on our existing EBS database.
    We run Oracle EBS 11.5.10.2 on a 10g database. The third party software vendor wants privileges like select, update, insert, delete on Oracle EBS tables like ap_invoices_all, po_distributions_all, gl_code_combinations, and all important workflow tables.
    The third party software vendor says the privileges are needed for their APIs and I have refused to grant the privileges. My employer now wants me to justify my refusal.
    Does anyone know if Oracle have documents that say that direct updates on Oracle EBS Application tables is not acceptable? The manuals have the “Do Not Use Database Tools to Modify Oracle Applications Data” section but is there anything else?
    Thanks for any suggestions.

    Hi
    First configure the same via the following menu path:
    1.) IMG>Financial accounting>Financial accounting global settings>Taxes on sales/purchases>Basic settings>External tax calculation>Define physical destination
    2.) Then test connection (option is available there).
    3.) If the connection is successful, also verify that the external tax package installed supports the R/3 4.6 version of the API. You do that by going to:
    System Information>Function List
    Check if the following functions are listed:
    • RFC_CALCULATE_TAXES_DOC
    • RFC_UPDATE_TAXES_DOC
    • RFC_FORCE_TAXES_DOC
    • RFC_DETERMINE_JURISDICTION
    4.) Then test the tax data retrieval:
    From SE37, select the relevant function modules like RFC_DETERMINE_JURISDICTION.
    The above 4 steps are necessary to satisfy that the RFC connection is established
    Hope useful
    S Jayaram

  • SAP to third party software and Back to SAP

    hi expects,
         i have to take the data from SAP system(4.7) to SAP sytem (5.0) to update third party software and back to SAP (ecc 5.0) again update it.

    Hi santosh:
    How-To Guides:
    Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken]
    How to Configure the IDoc Adapter
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
    Regards Mario

  • Third party software will not close without a soft reset.

    I have a few third party software utilities/games that do not want to close without a soft reset, some show a white screen and others just will not close. Should I uninstalll these and reinstall them? My grandson has the same utilities on his Treo 650 without these problems. My phone is the Treo 700p.
    Post relates to: Treo 700p (Verizon)

    I would try uninstalling and reinstalling the software. If this does not work, you may want to check if there are updates or newer versions of this program and be sure to check the compatibility.
    I hope this helps,
    -Pat

  • Third party software not syncing

    Hi All,
    Hoping that you can help, I have installed some Third Party Software on my Palm Z22 and it does not seem to be hot-syncing. I also can not see the program on the listing when I open the Palm Desktop software and go to HotSync->Custom....?? Is there somewhere that I can tell it to sync this program??
    Sorry very new to this!
    Thanks in advance,
    Belle.
    Post relates to: Palm Z22

    Yes I have the desktop application - and I follow the directions to "publish to a mobiel device".
    Does it have something to with not being able to see the program in the Hot Sync options?? It seem to be that it does not seem to sync this app?? Is there somewhere I can 'tell' it to sync?
    Thanks so much for your help!
    Post relates to: Palm Z22

  • Is there any third party software that will allow me to print CD labels from iTunes?

    I want to be able to print a CD label from a song list I burnt to CD in iTunes. Is there a third party software that will let me do this since iTunes won't?

    Hi,
    If you wish to merely transfer files, one idea could be to have one ftp or web server on each machine, and then use appropriate clients (ftp programs or web browsers).
    TCP/IP software is available under System 7.5.5. The 8100/100 can use standard RJ-45 Ethernet cabling via a suitable adapter for AAUI-15 (such as the Apple Ethernet Twisted-Pair Transceiver M0437).
    For the Mac, the now free program NetPresenz could perhaps be of interest as a server solution.
    Jan

Maybe you are looking for

  • Firefox 8 is using massive amounts of memory, currently 2 G with only a few tabs open.

    I just upgraded to Firefox 8, but it is using such enormous amounts of memory that my computer has slowed to a crawl. According to Task Manager, memory usage is now down to 1.3G but still that's so much that it's hard to see what I'm typing. The prev

  • MacBook Pro and some gaming

    I have seached through a bunch of the threads here, but still can't find solid information about gaming with a MBP. I the last gen 1.5 G4 Macbook that I travel with, but lately Ihave been really upset with the performace I get when playing games (spe

  • ALV-Header colour display

    hi i  need to display my header of alv in colour format... can u tell me function module what is used for this requirement..... advance thanks ........................urgent

  • Setting up report positions manually

    Is there a good way to do this? I swear somewhere I've seen a (forgive me) Dreamweaver like tool where we can move things around and align them just as we want them to appear. I am trying to produce one table with 5 sql queries, and if I could simply

  • Captivate demo hiding in WebHelp output

    RH10, WebHelp output I imported a captivate demo (SWF) and it appears in the project design view and runs properly when I preview the topic in Design view. However when I publish output, the topic comes up blank. What am I missing? Mike in Oz