Hi, I have a Lenovo 3000 n100 that does not recognize the dvd player or SD memory card slot
Hi, this is my first time on here so forgive me if I don't give all of the right information, I will try. Until about a month ago my dvd player and SD memory card slot worked fine. I was attempting to download pictures from the SD memory card to my laptop when for some reason it not only stopped reading the memory card but it erased it also. I tried to watch a movie on it to see if it was working and it is not. I checked the computer to see if I could manually turn it on and neither the memory card slot or the dvd player show up at all. Is this a driver problem and if so how do I fix it. Any help would be greatly appreciated. Thanks, Linda
I have struggled with the same thing, until about 1/2 hour ago....And its real simple. I'm not a techy but here's what worked for me.
Since Lenovo doesn't send boot discs you are going to have to create one. I went to http://www.ntfs.com/boot-disk.htm and downloaded the trial version - good for 10 days. If this works for you then you should buy the software (that goes w/o saying).
Once loaded to your machine you will need to create a DVD (CD may work as well, all I had was DVD's handy). Just lauch the application and it will do this for you.
Then you need to insert the DVD/CD into your player and restart the machine.
Once lauched the Software will lauch the Active@ Boot Disk menu. One of the options (going from memory here) was to give you a windows prompt. I simply typed c: and took me to the C drive. Then I typed chkdsk /f c:
I was then told my c drive was locked (sounds familiar I bet) but this time I was given the option to dismount the volume which I did. And it finally ran chkdsk, found and corrected all errors.
I rebooted my machine, launched diskeeper, and guess what - I can finally defrag my harddrive now which is sorely overdue!
Good luck. I hope this works for you!
Similar Messages
-
I have Lightroom 3.6 and it does not recognize the raw images from my Canon 7d mark II, suggestions?
I have Lightroom 3.6 and it does not recognize the raw images from my canon 7d mark II, suggestions, do I need to upgrade?
Yes, you need an upgrade for native support in Lightroom. You need version 5.70 or higher; current version is 5.71.
Alternatively, you could use the most recent DNG converter and convert the raw files to DNG files before importing into Lightroom. -
Somehow my calendar in iCal was deleted. It was not archived. I have Time Machine. How do I restore? Fortunately it was synched to Outlook, so it is not lost. I would like to out it back in iCal but iCal does not recognize the Outlook file.
Thank you. It's all back to normal (took around 7 hours on the late 2009 iMac). Time Machine's become better now compared to the last time I used it to migrate everything automatically (Snow Leopard days). With Maverick's Time Machine, it's almost like a cloning (except for the password) tool now. But it's always great to name the account and maybe the hardisk the same names so can just replace a newly installed OS.
God bless. Thanks again. -
Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
- Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
System: PC Windows 7 using Acrobat X Prof. - Thank you!Hi ,
There is an option of embedding index for faster search while converting email to a PDF .
However I am not sure that will serve your purpose or not .
I would recommend you to get in touch with Microsoft support as well .
Meanwhile I'll work on it and get back to you in case I get a desired solution .
Regards
Sukrit Dhingra -
Is there another way to close apps other than deleting them from the multitask bar.....I have a small crack in the bottom of my screen and that part of the screen does not recognize the touch.
There's generally no reason to be closing them that way at all. The apps you see in the recents bar are just that, apps that you used recently. Most of them are doing absolutely nothing. The only apps that are really doing anything in the background are ones that play music and ones that are using location services. Just leave them be.
Best of luck. -
After updating my iphone 4 with the ios 6 update. My iphone would no longer connect to my home wifi that is password protected. I know that I have the right password entered in. At work we have a free wifi connection that does not require a password and I can connect no problem to it. My ipod touch has no problem connecting to my home wifi. It is a 3rd gen ipod and does not have the ios 6 update on it. Please help!
I'm having the same issues. Started when I upgraded iphone 4S and ipad1 to 5.1.1. Wife's iphone 4g on 4.4.2 has been ok. I've forgot the network on both devices and restored the iphone, none of which changed the issue. I've upgraded to ios 6 on the iphone 4s, problem still persists.
One thing that will help for a time: go to your router and change the wireless control channel. When I first did this I got full connectivity for about 48 hours... and now the problem is back. I'm now changing the wireless control channel every 12 hours, which is a pain but at least keeps me connected. I've tried a few other solutions that are out there and that has been the best one so far.
to do this on a motorola router: type 192.168.0.1 in your address bar.
username: admin and password:motorola if you have not changed the factory defaults.
Click on the word "wireless" and look for the "control channel" field. This may be set to auto or to 1, try changing it to 6 or 11 (preferred) or any other channel.
The control channel can cause static in the wireless system IF there are several networks nearby that are on the default setup.
There is a fair bit of buzz about this issue out there, some other things I've seen:
This is a hardware issue. Go to the store and have your wifi antenna checked, some users reporting that they get free replacement devices.
Check against other wifi networks that require a password (this is next for me). Logon to those networks and surf until your wifi stops. If your wifi connects to the internet but stops responding, then this is a software (or hardware) issue and apple needs to step up. Some are claiming this to be the case.
IF you connect and stay connected/on the internet on another password protected wifi, then the issue is with your router. this is where things get cute.
Comcast may tell you to update your firmware. Motorola may tell you that your cable provider is the only one who can push through firmware updates. Comcast may tell you that you are not in an area that is being updated. It's unclear if they say that to all customers, or just those who have purchased cable modems and aren't renting them from comcast.
Good luck, more to come if I figure out anything else, and please post any solutions you may find. -
I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?
Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M. -
I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?
Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test. -
How do I hook up MIDI to my Mac? I have a new I/O that does not have MIDI in/out.
How do I hook up MIDI to my Mac? I have a new I/O that does not have MIDI in/out. I do have a M-audio Midisport 1x1.
Yall rock. Just tested Back to my Mac with my phone's hotspot and it worked! and so does airplay! Much Much appreciated!!
For double NAT the reset didn't work at first and I had to unplug all the connections but eventually got it back. I also checked "Enable detection of router-behind-router conditions" in the RG. Not sure if that did anything but I'm not seeing any AE warnings anymore.
Thanks again! -
My Ipod froze while downloading a software update from Itunes.. now I have a screen with an Itunes logo and the USB cord and my computer does not recognize the Ipod??
See Here for,
Device Not Recognised
For PC
http://support.apple.com/kb/TS1538
For Mac
http://support.apple.com/kb/ts1591
And Here for,
Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
I plugged my iphone in to do an update and it was mid way through the update when the phone was accidentally disconnected. Now the phone is stuck on the screen that shows a cable and the iTunes image suggesting the phone needs to be plugged in to iTunes. I have plugged it in, powered on and off, attempted to enter DFU mode numerous times all with no success. ITunes does not recognize the phone and I continue to only receive the screen saying I need to plug in to iTunes.. Please help!
Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.
-
Lightroom does not recognize the raw files (necs?) coming in from my Nikon AW1. It loads them as jpegs. I know it is possible to update Lightroom so it knows my Nikon but I can't get it to work.
I would like files to be loaded as .dng.update by downloading the files directly and then applying them for lr 4 and earlier, http://www.adobe.com/downloads/updates/
for lr 5.7.1, the last lr 5 update, use the below link:
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 6| 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Acrobat 9 does not recognize the smart card reader that work with other app. Can someone help me?
Hi to All,
Acrobat 9 (included in CS4 design premium) does not recognize the smart card reader. I have a smart card reader ACR38 smart card that works with all applications except Acrobat 9 pro. I tried to uninstall and reinstall it again, but when I try to insert the digital signature message is always the same, that does not find the Acrobat reader. Can someone help me?Hi MartinR
Thank you for your reply, i have tried what you suggest, and it did not work, the i DVD opening title changed but not the embedded movie.
Perhaps it is a setting in Final Cut Express?
After capturing my footage, i open a new project then i convert all clips to anamorphic, to give me the letterbox effect, i have tried now with and without anamorphic.
In my canvas screen, the footage does not fill the square, even if i have not selected anamorphic, and fall well within the TV safe areas, but the only way to ill the canvas up is to crop it bigger, but still when i export it does not give me the full screen view.
Any ideas? -
Ibook g4 that does not display the battery meter, sound volume, tim
I have an ibook g4 that does not display the battery meter, sound volume, time & day.When i move cursor over the area where they should be I see a spinning beach ball beach ball
Choose Go to Folder from the Finder's Go menu and enter ~/Library/Preferences/ as the folder's path. Locate the item named com.apple.systemuiserver with or without a plist at the end, and drag it to the desktop.
(10471) -
HD Insginia that will not recognize the cable signal
I have an HD insignia TV that is hooked up to an HD cable box with an HDMI cable. When reboot he cablebox, it sees it and it fine. But as soon as I turn off the TV for a second, it does not recognize the cable when the TV is turned back on. It says "not compatible". Id I reboot, it is again fine but I cannot turn off the TV and turn it back on. DVD and VCR both work fine.
Unfortunately its a common problem. There is a problem with the HDCP Handshake between the tv and the cable box. (See Link) Basically what it means is that you tv doesn't see the box unless it was turned on first (the tv) and the cable box follows. There are a couple things you can try. First you can try updating you tv firmware, this is done through the manufacturer's website, with the aid of a usb thumbdrive. The other option is to see if your cable provider has a newer cable box available to you. More times than not cable companies recycle boxes for years.
Maybe you are looking for
-
Performance Management Objective Setting
Hi Everyone, I am working on a full HCM implementation and had a few questions regarding performance management. The client is interested in having goals and objectives "cascade" through org. units and pre-load on Performance Appraisal templates. In
-
Hi , i have developed an interactive report in which form the first grid display i will move to the second grid display. Problem: For the first list there is an display variant. when i navigate to the second list it is using the same dis
-
Plug in guitar on iPad 3 but have no sound ?
I've plugged in with a big jack to headphone jack converter, then selected a guitar amp. The guitar is being picked up as I have recorded a few bars, however I have no way to hear the guitar until after it has recorded ? The headphone input seems to
-
Startup Macbook in Closed Display Mode
Hi everyone. I'm using my macbook with an external big display, keyboard and mouse. I recently discovered I could close the cover of my macbook and use the external as the main display. The thing is that I hate having to open the mac each time I want
-
IOS 6 keeps crashing non-native programs
I recently upgraded my iPod touch to iOS 6 and non-native programs keep crashing. Important programs that I need for work!! I took it to that Applestore and an employee told me that I just have to wait for the non-native program writers to send me u