Hi, I have a Mac book Pro 9,2 with Mountain Lion.
I need help: I followed the instruction on how to restore to factory settings. But after I erased the macintosh hd file I tried to reinstall OS X with mountain lion the interenet wasn't working properly and i couldn't finish. Now that I tried again I only get a file folder with a question mark what can I do now.
interenet wasn't working properly and i couldn't finish
Try restarting while holding down the Option key. That should prompt the startup manager window where you can select the startup disk and reboot.
Then try reformatting (erase) using OS X Recovery About OS X Recovery
Keep in mind, Apple does recommend a high speed broadband internet connection for OS X Recovery. A slow connection may time out before recovery is finished.
Similar Messages
-
How can I Upload Pictures, from my Mac Book Pro Retina Display with Mountain Lion OS? Tried but it gets as far as i pictures but does not open?
This is not necessarily 100% correct at the current time.
As Dropbox is encouraging people to set it up for automatic uploading of photos they gradually increment your space as you load more pictures for free at the current time.
You do start with a fixed 2 GB but if you upload photos you will be awarded more free space.
You can also open a free account with Flickr - you may have some upload limits per day but you can upload pictures there. -
How can I Upload Pictures from my Mac Book Pro Retina Display with Mountain Lion OS
How can I Upload Pictures, from my Mac Book Pro Retina Display with Mountain Lion OS? Tried but it gets as far asi pictures but does not open?
Upload? what does that mean?
You want ML forum? iLife? even notebook forum and directions to those?
iCloud? -
I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance
Call Apple Care.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
I have mac book pro and recently bought mountain lion online, i then used bootcamp to upload windows 7 now i have no sound when i use windows what can i do to get sound.
Install the required Windows drivers: Boot Camp Support Software 5.0.5033. Download this link preferably from Windows. Otherwise, download onto a FAT formatted USB disk from which you can copy to your Windows system.
-
finder on my mac book pro is not showing the sidebar plz help .i have a mac book pro running on os x lion 10.7.5
In Finder, Click View, then Show Sidebar - or ALT+CMD+S
-
I have a Mac Book Pro - HELP - problems with bootcamp = too full
I have have a Mac Book Pro. My drive is full. Sadly I had the partition set up at a store that should have known what they were doing (NOT an apple store, but a certified store that carries only Apple products), anyway.. I am now at the point where my bootcamp is full. I've tried reading a number of posts, but some things apply to me, some things don't so here is my situation:
Mac Book Pro
OS X 10.8.2
Processor: 2.53 GHz Intel Core i5
Memory 4 GB 1067 MHz DDR3
Startup Disk: Macintosh HD
Using Bootcamp with Windows 7
I purchased Camptunes by Paragon and tried repartioning my drive that way. It looked like it was going to work until the following error message happend:
Windows filesystem verification failed. Please, repair Windows volume and try again. Windows is not letting me do this because I don't have enough room. Round and round the problem goes.
Initially when I was trying to clear out my Windows side I found a bulky .NET program I wanted to delete. It would not delete it for me (I can retry to look for that error message), but essentially it wouldn't delete it at all. I have no temporary internet files I can delete, cookies or other programs (except my printer drivers), but essentially - I can't figure out what to do next.
I read another post about a person who didn't want to backup their files first. This is not me. I do back up to a LACIE back up drive that has a 999.86 GB capacity with 872.11GB free. What I want to know is do I have to buy another back up to keep it all completely separate? What other program do you recommend to create a virtual drive? Can I get a step by step on what to do? I have the original windows disk if that helps in the equasion.....
My head hurts.... help!interenet wasn't working properly and i couldn't finish
Try restarting while holding down the Option key. That should prompt the startup manager window where you can select the startup disk and reboot.
Then try reformatting (erase) using OS X Recovery About OS X Recovery
Keep in mind, Apple does recommend a high speed broadband internet connection for OS X Recovery. A slow connection may time out before recovery is finished. -
Why is my Mac book pro so slow on mountain lion?
I installed the new OS when it was released. Now all my applications are slow to process, I have to wait minutes for web pages to load. This has to be the worst release of an apple OS to date.
How do I get back to Lion?Use this article to examine your RAM picture:
Using Activity Monitor to read System Memory and determine how much RAM is being used
How much total RAM?
How much of the pie is Green? 1/8 pie? More? Less?
How much is Green + Blue combined?
How many PageOuts since last Startup?
How much Swap Used?
What MacBook Pro model (like 5,1) ?? -
I have a mac book pro 9,2, with intel corei5, 2.5 GHz., 1 processor, 2 cores, L2 cache (per core) 256KB, L3 Cache: 3MB, Memory 4GB, Boot Rom Version MBP91.00D3.BO8
System Software Version : OS X 10.9.5 (13F34)
Kernal Version: Darwin 13.4.0
Boot Volume: Macintosh HD
Boot Mode: Normal
Secure Virtual Memory: Enabled
Regarding the Macintosh Hard Drive:
Available space 208G.66GB , Capacity 499.25GB
Intel 7 Series Chipset, Link speed 6 Gigabit
Apple HDD Toshiba MK5065GSXF, Revision GV201B
Using Kodak ESP Printer 5200 Series AiO
Memory slots Bank0/DIMMO 2GB DDR3 1600MHZ and BANK 1/ DIMMO 2GB DDR3 1600MHz
The problem I am experiencing is a slowness of response between changing from various applications. What steps could I take to clean up the boot speeds, the applications speeds and general performance of the computer? I would like to restore the speeds of that when it was new.
Thank you for any suggestions you may have.Activity Monitor - Mavericks also Yosemite
Activity Monitor in Mavericks has significant changes
Performance Guide
Why is my computer slow
Why your Mac runs slower than it should
Slow Mac After Mavericks
Things you can do to resolve slowdowns see post by Kappy -
I have a Mac Book Pro with a 320hdd, 2.33 processor, 8 gigs of RAM and OS X 10.9.4 . My hdd crashed and I cannot access it so is it possible to install a 1 terabyte drive with the operating software already installed and also upgrade my RAM to 16 gigs?
If I were you I'd install a small SSD as the boot drive from OWC:
http://eshop.macsales.com/shop/SSD/OWC
Then put a second large conventional drive either in the optical bay (Data Doubler) or in an external.
You don't say which MBP you have: Size, CPU type.
Also when you upgrade you could see if you can salvage your data from your old HD. Can you hear it spin up? If so Data Rescue IV. -
My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?
Use the same Apple ID and password for purchasing in all these devices.
-
I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?
Hey, Clinton,
Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
1. Open iMovie 9 (finder/applications/iMovie 9.0.9
2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
3. Close iMovie 9
4. Open iMovie 10 (probably in the dock)
5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me! -
Hello,
I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2) -
I have a Mac Book Pro with 10.6.8 and want to back up my files using a flash drive. It says I did it but when I tried to check on my other Mac - an I Mac with 10.5.8, thedata does not seem to be there. I cant see photos, etc.. It shows the backup as a file and shows various system info. but there are no photos or other files shown.
Thanks for any advise.
MikeA PowerPC Mac, if that's what it is, won't be able to see an Intel Mac's formatted data. Also ExFat formatting is not supported by 10.6.3 or earlier. I would try viewing the backup on another Intel Mac with at least 10.6.4. If it isn't there, then the backup never really took place. I much profer a hard drive with Carbon Copy Cloner.
-
I have a mac book pro with retina,I haven't turned it on in a couple of months.no problems then, now when I try to turn it on i only get apple logo and progress bar. After a few mins the laptop just turns off and nothing eles.any help would be appreciated thanks
I linked to it above, but here is another link.
http://support.apple.com/en-us/HT201262
Maybe you are looking for
-
I cannot write text on certain jpg images. Any help is appreciated. CS4-64bit, CS4-32bit, and Elements behaves same. I tried on Windows-7(64bit) and Windows-XP, but the symptom is same. After opening the captioned jpg image, I click "Text Tool", th
-
I've created 2 sepreate but related swfs in Catalyst. I want to link them together. Is there a way to do this?
-
In SE11 for TCurr Exchange Rate Type : M From Currency : INR To Currency : USD Valid from : 01.09.2009 to 30.09.2009 When I hit Execute I get the following error message Lower Limit is Greater than Upper Limit But when I give the
-
Referential Constraint Error o86xn upgrade
I am trying to upgrade an Oracle enterprise manager grid control version 10.2.0.1 to 10.2.0.5. OS is RHEL 5
-
Hey Everyone! Last night I noticed something odd. My son and I both have an iPhone 4 and I have an original iPad as well. Now the iPhad is wi-fi only. Obviously, we have a wireless router installed in our house and everything to my knowledge is wo