Hi I have a problem I forgot my pass for unlocking iphone with Touch ID.Someone know how I can remuved
Hi I have a problem I forgot my pass for unlocking iphone with Touch ID.If someone know how I can remuved please tell
to be able to restore you need to put it into recovery mode first so it won't ask for the passcode
this article will go over how to put into recovery mode at the bottom of the article:
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
basically with it being powered off hold the home button while plugging it in and keep holding the home button until it shows the iTunes logo with a chord and it will then let you restore the device in iTunes
Similar Messages
-
Hi - I need help. I would like to use my old iPhone 3 as an iPod for music only. Problem is that my phone is locked with a password I can't remember. I havent used the phone since I got my iPhone 4. Anyone who know how I can reset the phone to standard installation or just get acces to the phone. There is no SIM card in the phone.
Hi Lawrence,
Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´ Those were good days..... What a City -
Somehow i have synced my photos from my area on to my ipod touch, and dont know how to remove the photos. Any help?
You need to unsync them. If you uses the folder syncing method either remove them from your syncing folder or change which is you syncing folder. Also see:
iPhone, iPad and iPod touch: Syncing photos via iTunes -
I am trying to update my account in iTunes but it asked me to spend all the money that I do have on my account before !! for that reason I would like to know How can I spend 0.16 $ in iTunes ?
jonathanfrommcallen wrote:
I am trying to update my account in iTunes but it asked me to spend all the money that I do have on my account before !! for that reason I would like to know How can I spend 0.16 $ in iTunes ?
How are you trying tp "update" your account?
Changing countries? -
I have somehow managed to lock my phone to one laptop, like I cannot put music on my phone from another laptop and i have to put in screen lock for it to even play! Anyone know how I can fix this ?
AshleyG0990 wrote:
I have somehow managed to lock my phone to one laptop, like I cannot put music on my phone from another laptop
What you did was sync it to a computer. The iPhone can sync to ONLY one iTunes library at a time. you can't put media on it from multiple computers. It's been this way since 6/29/2007.
i have to put in screen lock for it to even play
Completely different issue. What did you think it would do when you set a passcode for the phone? -
TS1424 I have an error -54. My network connection is fine. Please let me know how I can fix thsi
I have an error -54 on my itunes store. My internet connection is okay. Please let me know how I can fix this problem
Hi I have the same problem I am waiting for apple to get back to me on this
-
My daughter forgot her password for her iPod and I want to know how to reset it. Thanks
Help I need to recover password for iPod touch.
Connect the iPod to its syncing computer and restore from backup. If it asks for the unknow passcode place the iPod in recovery mode and restore it. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
HELPPPPPP!!!!!!!!!!! PLEASE!
What to Do If You've Forgotten Your iPhone's Passcode
Restoring iPod touch after forgotten passcode
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen -
I forgot my password for my iphone 4 and it is now disabled. I am trying to restore it through itunes, but it say I have to put my passcode into my phone first. Is there a way to restore without using my passcode?
The instructions are in that link. Just follow them VERY CAREFULLY. Especially the part about:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes. [but DON'T connect it to the iPhone yet]
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
When you see the iTunes screen, release the Home button. If you don't see this screen, try steps 1 through 3 again.
When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen. -
I'm waiting for my new iPhone 5s to be delivered. I lost my iPhone 5 but did have it backed up on my MacBook Pro. I was using iOS6 at the time. Will I have a problem restoring the data to my new iPhone 5s assuming it will come with iOS7?
No, you should not. There are problems trying to go the other way, but updating a newer iOS release from a backup of an older iOS release has always been supported and is the basic means of setting up a new device from a previous one.
-
My system consists of differents vi´s.Some of them are used to read analogic inputs and digital inputs, using the serial port.
The values that I read, go through differents vi to be proccesed, and at the end, these values are written in a file, all the values in the same file.
My problems of synchronization are:
1. I have one vi per input, and all of them use the same serial port. How can I synchronize them to avoid serial port conflicts? (using queues??) And how can I do, to get differents number of samples/sg with every vi? I have to introduce them in differents loops?
2. The other problem is that, for example, I want to read 8 samples/ s but I only want
to write two samples every second. How can I do to avoid stoping the data flow?
Maybe, my problem is that I want to see the system like
one block, and I am ignoring that, although all the system works like a block, every part works using a different "speed". I don´t know how tools can I use to combine two ideas, working like an only system( data dependence, some vis need the data of others vi to be able to work) and working getting differents numbers of samples/s.
I have seen that there are synchronization vis. I am going to glance at them, maybe I find something interesting but I amsure that your help will be very useful?
Thanks in advanced!!
GraciI think you are pretty much on the right track with Queues. I have implemented a very similar system myself using queues. I have even different systems connected to the serial interface, but I can synchronise them all easily using the following method:
1) Make a VI for opening the serial port and reading the data. The data (parsed to extract the numbers required) are then stored in an array (Shift register). If the pre-determined time delay is reached (say 5 seconds) the values are averaged and written to a Queue with a defined data type. Save the VI as a VI template.
2) Make a VI which starts an instance of this template VI for every channel you require. You can use VI Server to set values on the new front panel before you set it's property to "running". Setting a timer value for all can help ensure that the X-Axis of your timing values (if you require) are synchronised. The clue here is to define and initiate a QUEUE per channel. (RS-232_1, RS-232_2 and so on). The QUEUE name needs to be passed to the VI Template before running so that each VI running in the background has an individual link to the main program.
The second part of this VI simply uses an array of QUEUES, polling them one after another with a timeout of, say 5 ms. If data is found, append accordingly to an XY-Graph.
I also add in some "Auto termination" in the VI template (MAx number of values allowed in the QUEUE for example) to allow for the background processes to find out if the front-VI is still running or not. There are many different ways to do this, shoose the best for your application.
With this approach, it's not even important what instrument is connected as long as data is written in a specified format into a known QUEUE. I have also developed systems where I can transparently (almost) drop in VI Templates for instruments with similar functionality (output data) from different suppliers.
I would post an example, but the time it would take me to clean it up is too large. Sorry. If you have any further questions, don't hesitate to ask further questions.
Shane.
Using LV 6.1 and 8.2.1 on W2k (SP4) and WXP (SP2) -
I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELPI would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.
-
hey guys i forgot the password for my iphone 4S and i keep on trying any passwords but now my iphone has deactivated it self and its asking me the password but i cant remember it and i dont have the last compter it syniced with!!! so what should i do ?
In your case your only solution is to restore it ( see http://support.apple.com/kb/HT1808 ) and you may need to force it into restore mode to do that. This will wipe everything off it and reset it as new, without the passcode. You can then redownload purchased content, buy unless you have a sync'd copy of your contacts and photo's they will be gone.
-
Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.
hello i have a problem when i start woorksheet, my computer crash with blue screen.
OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
Thanks for your help.The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
-The Help-->Report information - this will tell us more about the computer, video and installed memory
-Installed hardware - what DAQ devices are you using (exact models!)
-The worksheet that crashes - we need to see how the timing is configured in the worksheet
-What other programs are running at the same time?
-Does the worksheet crash every time?
-Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
Regards,
-cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab. -
hi, i have a macbook and have been trying to play a dvd disk i have with some movies on them. well besically they wont play as theyre AVI files, does anyone know how i can solve this problem?
You can download and install MPlayerX free from Apple App Store. Works great for AVI and other movie formats. I had issues with some AVI's and MPlayerX resolved them.
Maybe you are looking for
-
Snow Leopard Symbol font doesn't always work in MS Office
I have to share files between MS Office 2011 for Mac and MS Office 2010 for Windows. As a mathematician, I use the Symbol font on my Mac frequently, but when I open those files in Windows, different characters have been substituted for the characters
-
Unable to enter MOSS 2007 License Key after SP2 upgrade - trial period about to expire
We are unable to enter the license key as stated in the title. The field does not allow any input. Central Admin shows that our trial period is about to expire very soon. Our environment is MOSS 2007 (Office Sharepoint Server with Enterprise Client
-
I'm trying 802.1x in the lab. It works fine connected directly to the switch port. However, when I try to connect through a hub it won't authenticate properly. The debug messages tell me the following: Aug 30 16:19:19: dot1x-err:Dot1x is supportedonl
-
My Golive website fonts are changing to chinese! help!
I have constructed a website in GoLive 2. My website works ok on my version of Safari on my computer but Ive tested it in Safari on 3 other Macs and on some of them the Helvetica sections are changing to a weird type of Chinese font. Can anyone tell
-
I can't import my Canon 6D RAW files into Lightroom 4.2
Anyone else have this problem? I have a 5D Mk II, and just bought a 6D yesterday. I have Lightroom 4.2 on a Mac. Anyone else have this problem? It won't let me import the RAW files, won't show previews of them.